Iphone 4s update stopped, then the backup was too big!
I was installing the latest update on my fiances iphone 4s. Then it stopped and I got some text saying the update wouldn't go. The phone was then locked with and I was prompted to connect it to itunes. Also hade a message about the simcard not being correct, that disappeared though. Then I had to do a backup and reset the phone. "Ok", fine I'll use the backup I just made - but no! Now the back up was too big! Bit above 14 Gb which I after som googling understand is more than "the basic" package? Anyway, I didn't have any recent backups so now I got the evil eye from my fiance as I write… is this solveable? What happened? Did the update get mixed into the backup thus making it a bigger file? The phone was almost full when I started the update… I do have a backup from september which is abot 12 Gb. Can I use this somehow?
Well, the update was aborted. Can't remember the exact error message and I can't produce it again obviously. But what happened next was that I was prompted to connect it to itunes and restore it, there was this symbol on the screen with a wire going to itunes.
Now it's just telling me there isn't enough space to backup from the one I want. I know what folder it is in, the application, mobile sync, backup. That folder is more than 14 Gb.
I cannot be more specific I'm afraid… But I mean, the info is there, in that folder bigger than 14 Gb. I can access the pictures, look at every one of them… Frustrating…
Haha! That's a good link!
cheers!
Similar Messages
-
hello, can not restore my backup from computer to my iphone because the iphone has ios 6 and the backup was done on ios 7
I just changed my iphone for some problems so my last backup was done under ios 7 and the new iphone has ios 6 that i would like to keep
-
I'm stuck with a large folder of music on my PC in My Music folder. And I used "Organize Library" in iTunes but it didn't copy everything over because the amount of music was too big. I've deleted the original copies of music outside of iTunes to open up more space and was wondering if I do a second "Organize Library" if it will recognize that some of the music has already been copied over.
I don't know what "restore the iPod" is
It's usually the second thing to do (after Reset) when the iPod is not working correctly.
Select the iPod in iTunes and click Restore.
See this -> Restoring iPod to factory settings
what about my main question? Can I go back to "sync all" but manually block certain albums?
No because sync all is just that.
Sycning specific playlists should work fine. And you can create more than one and sync which ones you want. -
Need help!! How do i cancle my backup? It wont let me do anything! Trying to get my imessages and facetime to work
Hi Natasha,
Below is a copy of my post in another thread on this topic. I'm not sure which country you are from, but hope it's helpful.
Possible fix for Australian users on Telstra and using Tango
I'm using the iPhone 5S with iOS 7.0.1 on a contract with Telstra in Australia and have been experiencing the problem with iMessage and FaceTime not activating. My iPhone 4S on iOS 6 worked perfectly on the same network however.
I seem to have now fixed this issue by removing the Tango app (it is similar to Skype). Reading through this thread and seeing the refernces to TuGo triggered my solution, although I believe the 2 apps are entirely unrelated (just have a similar sounding name).
This fix may have been co-incidental, given that I had to wait quite a while for a sync with iTunes to complete. After syncing, I didn't check the settings for Messages and FaceTime to see if they had been activated. I just went straight to the Tango app on the iPhone and deleted it - hey presto, instantly both Messages and FaceTime were activated.
Hope this helps others in Australia who may have Tango installed, and are on the Telstra network.
John -
Can't restore from iCloud with iPhone (iOS 6.0.1) if backup was made using iOS 6.1
I lost my iPhone, got a new one then I was grateful a was using iCloud but...
iOS 6.0.1 won't allow me to restore my last backup because it was made using ios 6.1.
There is not way to select this backup. Luckily for me, there is still a old backup made using iOS 6.0.1.
So I reconfigured the iPhone as a new phone, updated the software to 6.1.
http://support.apple.com/kb/TS4036
Unfortunately, in order to restore a backup from the cloud, I had to reset the phone. So It went back to iOS 6.0.1
Is there a different way to retrieve a backup from iCloud?If you plug it into a computer to install the update and then the backup, it should work. (At least, it did with my 4th Gen iTouch).
-
I tried to update my iPhone4's, but get the following error message: iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.
The solution will be found here, select your computer type and software.
http://support.apple.com/kb/TS2529 -
While trying to update my iPhone 4s I received this "iTunes could not backup the i Phone "Owner's iPhone" because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again. I have a PC and cannot find the backup in question to delete. Any ideas?
Here are location of your Backup folder(s):
Win7 - C:\Users\<username>\AppData\Roaming\Apple Computer\Mobile Sync\Backup
Vista - C:\Users\<username>\AppData\Roaming\Mobile Sync\Backup
Winxp- C:\Documents and Settings\<username>\Application Data\Apple Computer\Mobile Sync\Backup -
I inadvertently deleted my iPhone backup on my MacBook Pro. I restored iPhone to factory settings and then synced remotely with iCloud. However the error message repeatedly states:
iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again.
Any ideas as to how this can be resolved please. Thank you very much.My wife's iPhone 5 would not backup, after upgrading to iOS 8. The "genius" at the Apple store succeeded in DELETING, the only recent backup of her phone so
recovery became more critical.
I followed all the procedures for troubleshooting it, but still it would try to backup and then stop due to an error. We particularly wanted to preserve some game data/history/progress that she'd been working on for years. This game (Dream Fish) would no longer open after the iOS 8 upgrade ... and the phone would not successfully backup, and so we had no confidence that it would restore from an older backup either. I googled for solution and found Phoneview and iFunBox. These apps allow you to see & access data files in the iPhone. Phoneview was too fragile and crashed when copying a file any size.
I found "iFunBox". iFunBox was excellent. I used iFunBox to recover her game data. It allows you to make a copy of data files that reside on the iPhone... and store them as a manual backup on the Mac.
And in the process I found 2 games that caused iFunBox to crash. The 2 games in question were not important enough to try to keep, so I deleted them from the iPhone.
So then, I had a manual backup of the important iPhone data, and had eliminated two game files that apparently had a conflict with iOS 8.
My next Backup attempt was successful. The iPhone with iOS 8 would now backup to both the Mac and to the Cloud.
Next I deleted Dream Fish from the iPhone and downloaded a fresh version from the Cloud. The new Dream Fish with no history opened in iOS 8.
Then I used iFunBox to copy my wife's Dream Fish data history from the Mac back into the new game.
Once the transfer was complete, Dream Fish would now OPEN and all of her progress was there and working like normal.
Hope this helps. -
I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone"
Assuming you are using the current version of iTunes (11,2,2), open iTunes, click "Preferences" under the leftmost entry on iTunes' menu, then choose "Devices".
Find the iPhone's backup there, highlight it, and choose "Delete Backup". -
Error message when attempting to backup up iPhone4S to Mac says "iTunes could not back up the iphone because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again." But how do I delete the backup? Can't find answer to that anywhere.
We had this problem after upgrading to iOS 8. The iPhone 5 would not backup either to the cloud or to the computer. Backup always ended with an error message.
Long story short, with the help of iFunBox ( which I used to make manual backups of some important iPhone data files ), I discovered two games that
would crash iFunBox. They were not important games for us, so I didn't try to isolate the offending data files. And I deleted the two games from the iPhone.
Apparently these two games conflicted with iOS 8 just as they did with iFunBox. The next backup without those games was then successful.
I backed up to both the Mac and the cloud.
Hope this helps. -
"iTunes could not backup the iPhone because the backup was corrupt or not compatible with the iPhone."
Anybody else experienced this when trying to update iPhone software to 5.1.1???
How have you resolved this issue.
Any help anyone can give will be warmly received!!
Thanks,
R.
London.Hello jsachi,
The article linked below details a number of troubleshooting steps that can help get a backup created in iTunes.
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/TS2529
Cheers,
Allen -
ITunes could not restore the iPhone "___'s iPhone" because the backup was corrupt or not compatible
Ok so bear with me here, it is somewhat of a long story.
I had been using an iPhone 4 for a while, with an old iTunes account that has all my stuff from over the years on it, on my computer. A week ago, I dropped by iPhone 4 in the sink and it got covered with water, despite quickly pulling it out, putting it in rice under a lamp, the phone was shot, and I was without a phone. My Dad, who is on the same AT&T plan with me, was using an iPhone 3. He was available for an upgrade, so he got a new iPhone, and gave me the iPhone 3. Now i'm not an apple master or anything but I have a good idea of what I am doing, normally, I backup my phone to my computer every few months. Basically everytime I plug it in to my computer which isn't very often because I just charge it with the wall charger. So got my SIM card with the same phone number and all, and obviously, while still being my number, it had my dads apps, messages, contacts and photos on it. So I bring it home, and plug it into my computer, I cancel the intial sync, and right click on the phone on the left side of iTunes and hit "restore from backup" I look through the list of backups, and the most recent one I see is from Dec 11, 2011. Which is surprsing because i'm pretty sure I had backed up since then, but I say whatever i'll still get contacts apps and most pictures back etc. So I hit it, and go through with it, and it tells me there was a more recent date of backing up, relieved, I click on that and continue, the normal bar comes up it says something like estimated time 30 minutes, so I walk away, come back 5 minutes later, and I get an error message saying, "iTunes could not restore the iPhone "____'s iPhone" because the backup was corrupt or is not compatible with the iPhone." Confused, I go back and try again, however this time I click on "old backup (the dec 11th one rather than the newer one) and the same thing happens after a few minutes. I go back a third time, and select a time from August of 2011. And I hit restore, and it goes through. However, this happened to be a backup I made right when I got my new iPhone 4, and therefore I basically restored my phone, to having nothing. Thats where I sit right now, with none of my contacts or pictures. I'm not sure if I backed up to iCloud or not and i'm not sure how to retrieve that. Some extra things: When I try to sync my iTunes library and apps onto the new iphone 3, I need to greatly reduce the number of songs and apps beacuse this iPhone is only an 8gb while the old one was 16, (I don't think that is the reason I am getting the error message though because when I sync it clearly says "Your iPhone does not have enough space). Also, this is obviously an iPhone 3, not an iPhone 4, updated with the most recent iTunes software, which, I believe is 5.1.
Any help would be greatly appreciated as I have over 1,400 pictures saved on my old phone (very important things to me) and a contact list of over 300 including important friends, coaches, teachers and workers.
Thank you very much, if it doesn't say my email on here try me at [email protected]
Thanks again
-Drew
Edit: The current phone is an iPhone 3G, not a 3Gs.ashleyfrg2,
you will need to restore your phone as a new device and NOT from backup. If you've been using your phone as recommended, you should have minimal data loss: Photos should have been imported to your computer right after taking them; contacts should be safe in a cloud service or on your computer. You CANNOT downgrade to 4.3.3. -
I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored".
I have tried restoring factory settings but iTunes simply will not restore from back up & I'm not sure what else to do!
Any advice would be much appreciated.I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.
-
I am using iphone 3GS, after syncing for few times and got the errors. I deleted the backup from Edit-> Preferences-> Devices. Then I synced again, there was an error message: itunes could not back up the iphone because the backup was corrupt or not compatible with the iphone. What can I do? I have no backup anymore on ituens.
babesharon
I closed iTunes & manually deleted the file which was still stored locally even though it didn't display in Preferences. I have vista so I went to
C:\Users\{user name}\AppData\Roaming\Apple Computer\MobileSync and deleted everything in the Backup folder (though I left the folder as is). If you have a different OS search the apple website for the backup location.
I reopened iTunes & Synced with out a problem. I also got the update to install.
Good luck. -
I replaced a faulty iPhone 4S with a new handset today, another iPhone 4S. I was certain to backup my previous iPhone 4S to iTunes on my PC before returning the faulty unit. The new phone was 'set up' at the Apple Store and updated to the current iOS, 7.0.4, as was the faulty unit prior to replacement. Upon connecting the new unit to iTunes to restore to the most recent restore point from earlier in the day, the following message was shown:
"iTunes could not restore iPhone because the backup was corrupt or not compatible with the iPhone that is being restored."
I've browsed other forums and have contacted the Apple Store Genius Bar, and will hear from the Lead Genius tomorrow. In the meantime, I am hoping someone may have information for me on what I may need to do in order to restore my phone as I'd anticipated doing by now. My photos, email and text messages are what is affected and have not repopulated. My music is accessable via iCloud without a problem and my contacts were kept via SIM. I regularly copy my Camera Roll from my iPhone to my computer, and most of my photos are still viewable via Apple TV/My Photo Stream however only through the photos last saved. The 348 recent photos that were on my faulty unit, and viewable in My Photo Stream were presumedly safe, but have disappeared.
I have yet to shut down or restart my computer, nor have I exited out of iTunes, for the simple reason that I'd anticipated returning home with the new handset and plug it into my computer to restore right away. I did, but that's as far as I've gotten.
Any help would be appreciated. Thank you!Had the exact same problem whilst upgrading my iphone 4 to ios5. Lost all my data.
Backed up ios 4.3 (8F190) iphone4. Upgraded to ios 5.1 (9B176), and then tried to restore.
No joy, repeated the restore attempts countless times - lost all my data
Tried again with a simulated test.
Created a new itunes account on a new PC (64-bit windows 7), latest itunes(10.6.1.7- 64 bit).
As my data is toast, I'm using the ios 5.1 phone to try to see if it was me or an apple bug, or something elsewhich caused this to happen.
After quite a few more hours at it, it looks like a bug in iTunes / ios. I would be very happy to be wrong, though.
Tried repeatedly restoring an ios 4.3 backup to 5.1 - no joy.
Happy to try again - it does restore partially (got the call register transferred, but no SMS'es or anything else).
Any ideas?
Maybe you are looking for
-
Price Update on new purchase order in ME21N
We are creating new purchase orders for year 2011 and wanted to do mass update of price in the conditions tab. It works only when we select each line item. But if we select all and then hit price update with choice 'B', only the first line is being
-
I baught all the cables and connected my iPad 2 to my tv Sony Bravia played something on you tube and got the message that it is connected and playing on my tv but the tv had a blank screen what am I doing wrong
-
Externalizing Users from Essbase to Shared Services in OEPM 11.1.1.2
Hi All, I have a strange problem like when we installed and configured EAS, Essbase with Shared Services these products are moved to the control of shared Services. I know that in EAS after configuration the control moves to HSS, but Essbase control
-
Hi All, I am writing a modified program for one of the old report and it is giving me error at the GET LIKP statement saying '"LIKP" is not defined for the current logical database.'. GET LIKP . %DBACC = %DBACC - 1. IF %DBACC = 0. STOP. END
-
I need some way to talk to my gpib instrument. I have a gpib-232ct-A, but my software is only for windows, dos, etc. I have a mac so I need software for a mac.