IPhone 4S Volume Not Working!! Tried everything, fed up!!
Okay, so today I went to go take a shower and I had my phone on the counter in the bathroom. As soon as I was out of the shower and back in my room, suddenly the volume buttons weren't working anymore. It will work when I have headphones in, and it'll work for voice memos and when I test my ringtones, but for nothing else. When I try to turn up or down the volume, it shows the ringer symbol but none of the little squares to show how loud or soft it is. I have an iPhone 4S, all up to date on software, and let me just list the things that I have done to try to solve this problem:
- I have cleaned the dock and the headphone jack with a q-tip and alcohol
- I have used a hairdryer on both the dock and the headphone jack
- I have done a hard reboot of my phone three times
- I have synced my phone to make sure it was up to date
- I have double and triple checked the side bar on my phone
- I have gone to settings to make sure that everything is working correctly and everything is turned to 'ON'
- I've turned it to airplane mode and turned it back and that didn't work
- Bluetooth is not on
- Tried doing a restore on my phone
I'd really prefer to not have to take my phone into the apple store or buy a new one (I'm just a poor college student - not great on money right now) since I've had my phone for almost three years and everything else on my phone works fine...
PLEASE somebody help. Save this poor college student some $$$!!
But what does that mean for me?
I think I may just have to buy a new phone. Needless to say, it most likely won't be Apple.
Their support ***** and their products don't last long to make up for the amount of money that you spend.
Similar Messages
-
Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible
Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????
IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!
-
ICloud for pc not working tried everything
iCloud for pc not working tried everything ( uninstall - reinstall - delete files - old versions ) nothing helps it just downloads a couple of photos and off again my iPhone uploads perfectly as all the pics goes to the iPad seamlessly, Please Help i'm on windows 8.1 x64, Thanks
I think that the card reader may in fact be defective, but it just doesn't make sense if I have already used it fine before. I've tried everything on this Apple support page, thank you though.
Does anyone have any suggestions? -
IPhone 5 mobile internet not working - tried everything
Mobile internet on my iPhone is not working properly, regardless of the protocol (edge or 3G). It's the strangest problem possible and so far I've tried everything to fix the problem, but nothing helps.
Here's the deal:
- when I switch from wi-fi to 3G/E, everythings seems normal (there's the sign 3G or edge on the screen), but there is no internet connection
- I have to go to settings, switch off 3G and switch it back on and the internet starts working. It solves the problem also if there's only edge signal, which makes it even more strange.
- when I switch back to wi-fi and then again back to mobile network, the same problem occurs and the same solutions applies
- the same happens when I drive in my car and the phone switches between two carrier's antennas or if I switch on the airplane mode/reset the phone
I've used the iPhone since it came out and had every version, so I consider myself an advanced user. In order to try to solve the problem I tried everything possible:
- checked cellular data information
- reset network settings
- restored the phone
- updated the iOS
- manually deleted cellular data and entered it again
- went to my carrier to get a new sim card
- had the carrier analyze the problem on a case study (I sent over location data and time), but they found no mistakes on the network
- went to Apple and got my iPhone replaced TWICE
So I eliminated the following:
- settings error
- carrier error
- hardware error
The only thing I have left now is the exorcist.Same issue
-
IPhone 4 will not restore - TRIED EVERYTHING
So I have a multitude of issues with my iPhone 4 and after trying a multitude of fixes that I could find, no change.
Here are the issues I'm currently facing:
- iPhone will not turn on whlie NOT connected to power source
- When connected to computer, iPhone will display apple logo then switch off then back again continuously
- I can put the phone into recovery mode (with itunes logo and cable display on screen) but am unable to put into dfu mode (I've tried everything)
- when put into recovery mode, iTunes will recognize a general iPhone 4 connection and prompts to initiate a recovery
- iPhone only registers with iTunes not with computer
- Recovery yields either error 21 or error 3194
I have tried:
- Tinyumbrella: iPhone shows up under "Recovery Devices" with a question mark and a series of random numbers
- altering host file
- all manner of restore in iTunes
Is there ANYTHING else I can do to fix this **** thing?What I would do is run an anti spyware scan / anti virus scan with the iPhone connected to the computer. This way all of your files from both an be checked. It sounds like you have a Trojan that often causes computers of any type to force a shutdown and go into a reboot mode. My guess is you might have had this occur recently on a computer you linked to. If not it may have come from a shareware program or a download you've recently installed. You can down load all of your iPhone files to your computer, run the scans, disconnect your iPhone before file deletion sir scrubs , reset to company settings/ default mode then plug it back in so you can re download your files once they've been scrubbed. If this doesn't work try to disable the location off mode and redo everything again. This way your privacy settings might block or scramble the malware or virus that's tracing your device through your computer. This is the best advice I have. Web root Spysweeper will destroy anything and use a full based line antivirus program. If you connect your device to a work computer chances are it came through an email while it was connected. At any rate good luck and this is the best home remedy I can come up with. iPhones aren't supposed to be inflicted because they don't run on most active x programs, but if a file you're using does that may be your intersection point.
-
Folder Actions will not work - tried everything
Recently Folder Actions simply stopped working on 10.6.4. They worked fine before then recently just stopped working.
I've tried everything I can think of, including:
1. completely removing enabling & disabling & enabling folder actions through the setup app.
2. trashing folder actions plist files in user domain and relaunching
3. disabling related launchd processes with lingon
4. trashing launch agents in user domain and also trying to unload them in terminal
5. trying to kill the folder actions dispatcher process in activity monitor (just relaunches, as it should)
6. emptying system caches including dyld shared cache using cocktail
7. doing most of the above and restarting
It's driving me nuts. Any other ideas?
here's some entries from syslog:
8/2/10 9:31:37 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 6 seconds
8/2/10 9:37:29 AM Folder Actions Setup[4403] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 9:43:37 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.enabled[309]) Exited: Killed
8/2/10 9:46:23 AM [0x0-0x3a03a].com.apple.systemevents[360] com.apple.FolderActions.enabled: Already loaded
8/2/10 9:52:07 AM Folder Actions Setup[1083] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 9:52:16 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 7 seconds
8/2/10 9:53:02 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 1 seconds
8/2/10 9:56:18 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 10 seconds
8/2/10 10:00:58 AM Folder Actions Setup[2190] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 10:01:01 AM com.apple.FolderActions.enabled[2236] launchctl: Error unloading: com.apple.FolderActions.folders
8/2/10 10:01:30 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 10 seconds
8/2/10 10:01:42 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 9 seconds
8/2/10 10:05:03 AM sudo[2622] lryter : TTY=ttys000 ; PWD=/Users/lryter ; USER=root ; COMMAND=/bin/launchctl unload -w /Users/lryter/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
8/2/10 10:10:25 AM Folder Actions Setup[676] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 10:10:27 AM com.apple.FolderActions.enabled[680] launchctl: Couldn't stat("/Users/lryter/Library/LaunchAgents/com.apple.FolderActions.folders.plist"): No such file or directory
8/2/10 10:10:27 AM com.apple.FolderActions.enabled[680] nothing found to unload
8/2/10 10:10:38 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 8 seconds
8/2/10 10:13:17 AM sudo[943] lryter : TTY=ttys000 ; PWD=/Users/lryter ; USER=root ; COMMAND=/bin/launchctl unload -w /Users/lryter/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
8/2/10 10:14:01 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 4 seconds
8/2/10 10:14:14 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 1 secondsI finally go Folders Action to work, after being unable to use it even for a simple beep for years now.
Here is what I did:
1. Changed permissions to 755 for the following folder and two contained files (note that 775 didn't work for me)
~/Library/LaunchAgents/
~/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
~/Library/LaunchAgents/com.apple.FolderActions.folders.plist
2. Changed the following lines within ~/Library/LaunchAgents/com.apple.FolderActions.enabled.plist (using TextWrangler)
from:
<key>OnDemand</key>
<false/>
to:
<key>OnDemand</key>
<true/>
Prior to the permissions changes within #1 above, the value of <true/> kept getting changed back to <false/> by something in the system... and though
there was improvement by the permissions changes, the following console message appeared until false was changed to true.
com.apple.FolderActions.enabled[4127] launchctl: Error unloading: com.apple.FolderActions.folders
At this point true is staying true, and not being changed by unknown forces to false, and the above message is not appearing.
3. The only other thing I did prior to #1 and #2 above, was to run the script (unsaved),
tell application "/System/Library/CoreServices/Folder Actions Dispatcher.app" to tick
This little tell line caused something to occur where my Folder Action surprised me and worked for the first time though it took about 30 seconds and was erratic,
sometimes performing, sometimes not, though if I would do move something into the folder to trigger the action that should occur, and did not occur, then at the point
running the above tell line or script would cause the action to occur.
4. At this point I don't fool with the tell line or script from #3, and it seems that systemevents has gotten involved, as well as launchd, and with my simple Folder Action script
I'm getting the folder action within 10 seconds compared to 30 to 45 if ever seconds.
5. This is still too early to tell if this is the wonder pill I've needed since Leopard, and now Snow Leopard (and maybe Tiger as well: I forget when I even tried Folder Actions).
There was a time when I moved things around, so that the items normally found in the former AppleScript folder, were placed elsewhere in subfolders, so I don't know if that lead to this...
because I could get Folder Actions to work on Macs in the Applestore, but not my own Mac. Watching the console messages was helpful. I don't think it's a big concern that
deprecated messages are found sometimes. That's a just a normal part of the constantly rebuilding of things that goes on. It's more like a reminder that we've got an upgraded
OEM part were going to start using, and the older part won't be available after such and such date, so program accordingly, and in the meantime drive. -
Flash 9 Does Not Work- Tried EVERYTHING
I tried everything from uninstalling, using the standalone,
deleting registry keys, using the ocx files, EVERYTHING. I'm tired
of "This is the answer" posts on internet, which did not work for
me, even though I follow the direction word-for-word.
Anyone else share the feeling?
I can't use anything- youtube, aim....
i think i'm going suicidal.Try this first: Instructions for uninstalling and
reinstalling the Flash Player:
1. First download the uninstaller to your desktop from here
http://www.adobe.com/go/tn_14157
2. Before running this uninstaller be sure to read the
instruction and close all running programs.
3. Open the following folder
C:\WINDOWS\system32\Macromed\Flash
4. Run the uninstaller
5. What files are left in this folder?
C:\WINDOWS\system32\Macromed\Flash
6. If there are files left, delete the Flash folder.
7. Install the Flash Player from here:
http://www.adobe.com/go/getflashplayer
8. Test the Flash Player here:
http://www.adobe.com/products/flash/about/
If the Flash Player did not install properly, there may be a
permissions issue within your Windows Registry. Please login as the
Administrator (NOT a User with Admin privileges) and follow these
instructions to open the registry.
Warning: The following solution involves the Windows System
Registry. Editing or manipulating the registry incorrectly can
result in serious system damage which may require re-installation
of the operating system. If you are not comfortable editing the
registry, then take your system to a professional. If you choose to
proceed, then it is essential that you create a complete system
backup and a Windows System Restore Point before proceeding. Adobe
Systems cannot be held responsible for damage resulting from this
information.
1. Select Start > Run
2. Type in “regedit”
3. Right click on HKEY_CLASSES_ROOT
4. Select Permissions
5. Select Advanced
Compare your permissions with the ones in this screenshot.
Reply with any differences that you see.
http://www.supportflash.com/vista_key.png
Please do not use Microsoft’s SubInACL took unless you
know for sure that the system registry permissions is the issue.
SubInACL has been used on Vista successfully, but if you need to
find out more information, like is it officially supported on
Vista, please contact Microsoft.
http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e39 27b&displaylang=en -
well its been around 2 weeks already and my phone will not make any sound. the volume buttons work perfect but no sounds comes out. if i connect a headast or headphones it will work but other then that it doesnt. any help?
Hi. I have the same problem. When I saw your question I tried the headphones and it worked but not without.... The volumebuttoms does not work for me, but I can change the volume in the settings..The ringsignal does work, the smssignal, not...
Hope we got some answers oour questions.. I have my question a few minutes before yours.
//Pluttan -
Audio Not working, tried everything...
My sound hasn't been working for a couple days now, I've tried the HP vidoes and Forums and done everything (restores, re-installed the audio, etc.) and nothing has fixed the problem. When i scroll over the audio symbol it has an X on it and says "The Audio Service is not running". I right click, choose 'Playback' and it shows the Speakers and 'Stereo Mix, Realtek High Definition Audio' are disabled, I click 'Enable' but it does nothing. I've gone into Computer Management and right clicked 'Windows Audio' and hit Start but a box pops up saying 'Windows could not start the Windows Audio service on Local Computer. Error 1079: The account specified for this service is different from the account specified for other services running in the same process.' Please help, I have online homework to do but I cannot hear the video!
Start with looking at THIS. If that does not do the trick, then follow the steps in THIS thread.
If all that fails, look at this YouTube VIDEO.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP. -
Spotlight does NOT work - tried EVERYTHING
Running older Intel Mac Pro... Mountain Lion
Spotlight just stopped working - it returns nothing but webpage suggestions.
There are NO disks added under the Spotlight System Preferences.
Trying to add and then remove only results in the "Privacy List Error The item couldn't be addred because you don't have the appropriate permissions.
I've rebuilt permissions. No go.
I've killed SystemUIServer in Activities Monitor - nada.
I've used the info here on How to Disable (or Enable) Spotlight in Mac OS X Lion which includes the terminal commands for killing Spotlight, restarting again, and forcing reindexing. Nothing. Well almost nothing- I got it to re-index for a bit last night... But when you use Spotlight.... nothing.
I have an ugly suspicion it has to do with perceived ownership of the disks by the OS - anyone care to take me up on this? Here's why:
I you reveal the hidden files you see this:
When I "Get Info" (Command-I) I see these permissions... the disk first, and then the .Spotlight-V100 folder:
So why does the .Spotlight-V100 say that everyone has "No Access"? But looking at my Mac Mini these settings seem to be correct.
I tried changing ownership on the everyone to "Read" (which didn't work everytime I tried until I started writing this of course) but it just returns the same Privacy Access error when you try to add the disk to the Spotlight Preferences Privacy list again. I tried changing it to Read & Write... same thing.
Now inside the Spotlight-V100 folder is the VolumeConfiguration.plist file - I'm wondering if something in these preferences (which you can read unless you change the setting to "Read" where it is first set 'everyone' as 'no access') might give a clue - so here is the content of that file and I'll leave this for now to see if anyone has any clue what's going on here. Thanks
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Annotations</key>
<dict>
<key>Creation_Predicates</key>
<dict>
<key>false</key>
<false/>
<key>fstype.hfs</key>
<true/>
<key>interconnect.sata</key>
<true/>
<key>is.alreadyindexed</key>
<false/>
<key>is.automount</key>
<false/>
<key>is.backupstore</key>
<false/>
<key>is.backupvolume</key>
<false/>
<key>is.bootablevolume</key>
<true/>
<key>is.cameramedia</key>
<false/>
<key>is.diskimage</key>
<false/>
<key>is.dontbrowse</key>
<false/>
<key>is.ejectable</key>
<false/>
<key>is.external</key>
<false/>
<key>is.externalvolumes.defaultoff</key>
<false/>
<key>is.externalvolumes.ignore</key>
<false/>
<key>is.filevault</key>
<false/>
<key>is.forcedefaultindex</key>
<false/>
<key>is.forcefsonly</key>
<false/>
<key>is.home</key>
<false/>
<key>is.internal</key>
<true/>
<key>is.ipod</key>
<false/>
<key>is.local</key>
<true/>
<key>is.lowdiskspace</key>
<false/>
<key>is.mirrored.idisk</key>
<false/>
<key>is.mobilebackups</key>
<false/>
<key>is.network</key>
<false/>
<key>is.quarantined</key>
<false/>
<key>is.readonly</key>
<false/>
<key>is.removable</key>
<false/>
<key>is.rootfs</key>
<true/>
<key>is.safeboot</key>
<false/>
<key>is.syntheticmount</key>
<false/>
<key>is.tinyvolume</key>
<false/>
<key>is.windowsbootablevolume</key>
<false/>
<key>is.xsan</key>
<false/>
<key>policy.location.volume</key>
<true/>
<key>self.appleinternal</key>
<false/>
<key>self.server</key>
<false/>
<key>status.neverindex</key>
<false/>
<key>supports.catsearch</key>
<true/>
<key>supports.fileids</key>
<true/>
<key>supports.volfs</key>
<true/>
<key>true</key>
<true/>
<key>uuid.b449cee2-6ad5-3b8a-a749-9e6d14c278b1</key>
<true/>
</dict>
<key>DefaultStore_EffectiveSearch</key>
<integer>3</integer>
<key>DefaultStore_RequestedSearch</key>
<integer>3</integer>
</dict>
<key>ConfigurationCreationDate</key>
<date>2013-02-15T00:07:09Z</date>
<key>ConfigurationCreationVersion</key>
<string>Version 10.8.2 (Build 12C60)</string>
<key>ConfigurationModificationDate</key>
<date>2013-02-15T00:07:09Z</date>
<key>ConfigurationModificationVersion</key>
<string>Version 10.8.2 (Build 12C60)</string>
<key>Exclusions</key>
<array/>
<key>Options</key>
<dict>
<key>ConfigurationType</key>
<string>Default</string>
</dict>
<key>Stores</key>
<dict>
<key>7577F89E-857D-4CB6-B9D0-E937F1944380</key>
<dict>
<key>CreationDate</key>
<date>2013-02-15T00:07:09Z</date>
<key>CreationVersion</key>
<string>Version 10.8.2 (Build 12C60)</string>
<key>IndexVersion</key>
<integer>95</integer>
<key>PartialPath</key>
<string>/</string>
<key>PolicyDate</key>
<date>2013-02-15T00:07:09Z</date>
<key>PolicyLevel</key>
<string>kMDConfigSearchLevelReadWrite</string>
<key>PolicyVersion</key>
<string>Version 10.8.2 (Build 12C60)</string>
</dict>
</dict>
</dict>
</plist>Hi Linc,
Thanks for picking up my thread and offering your insights.
Going to Console and filtering for mdworker reveals no entries what so ever. I recognize mdworker as one of the key components of Spotlight so suggests it's not running. I also see that Console is posting repeated crashes for for
LaunchServices/5123589
here's the full entry:
2/15/13 8:28:20.942 PM ReportCrash[637]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
2/15/13 8:28:20.942 PM ReportCrash[637]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
2/15/13 8:28:20.998 PM com.apple.launchd[1]: (com.apple.metadata.mds[640]) Job appears to have crashed: Segmentation fault: 11
2/15/13 8:28:20.998 PM com.apple.launchd[1]: (com.apple.metadata.mds) Throttling respawn: Will start in 10 seconds
2/15/13 8:28:21.107 PM ReportCrash[637]: Saved crash report for mds[640] version 707.3 to /Library/Logs/DiagnosticReports/mds_2013-02-15-202821_COMPUTER_NAME.crash
this certainly appears also to be Spotlight because running this in Terminal...
sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
and the crash reports stop. Run this to reload Spotlight...
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
and the errors start again.
This is the crash report noted above - pretty sure this is what you want now - I see no mdsworker but mds errors all through...
Thoughts?
Thanks.
Process: mds [640]
Path: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Support/mds
Identifier: mds
Version: 707.3
Code Type: X86-64 (Native)
Parent Process: launchd [1]
User ID: 0
Date/Time: 2013-02-15 20:28:20.498 -0500
OS Version: Mac OS X 10.8.2 (12C60)
Report Version: 10
Crashed Thread: 9 Dispatch queue: <MDSDiskStore 0x7fd02500ac00 shutdown:NO got shutdown notification:NO>
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008
VM Regions Near 0x8:
-->
__TEXT 000000010514c000-000000010526c000 [ 1152K] r-x/rwx SM=COW /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Support/mds
Application Specific Information:
[0x105b70000](Error) IndexGeneral in ssize_t fd_pread(fd_ptr, void *, size_t, off_t):pread(-1 , o:0, s:0) err:2
[0x105b70000](Error) IndexCI in _Bool store_stream_init(store_stream_t *, fd_ptr, _Bool):store_stream_init err:2
[0x105b70000](Warning) IndexStore in int db_restore_dirty_chunk_info(int, db_dirty_chunk_info *):Restore error: 2, recovering from shadow
[0x105b70000](Error) IndexState in int _SIOpenIndexFilesWithState(SIRef, uint32_t, _Bool, _Bool, _Bool, _Bool *, DocID *, CIDocCounts *):ContentInde
Thread 0:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fff86abe686 mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff86abdc42 mach_msg + 70
2 com.apple.CoreFoundation 0x00007fff84b22803 __CFRunLoopServiceMachPort + 195
3 com.apple.CoreFoundation 0x00007fff84b27ee6 __CFRunLoopRun + 1078
4 com.apple.CoreFoundation 0x00007fff84b276b2 CFRunLoopRunSpecific + 290
5 mds 0x000000010515aa54 0x10514c000 + 59988
6 libdyld.dylib 0x00007fff8a4327e1 start + 1
Thread 1:
0 libsystem_kernel.dylib 0x00007fff86ac06d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff85029eec _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff85029cb3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 2:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff86ac0d16 kevent + 10
1 libdispatch.dylib 0x00007fff8d81ddea _dispatch_mgr_invoke + 883
2 libdispatch.dylib 0x00007fff8d81d9ee _dispatch_mgr_thread + 54
Thread 3:
0 libsystem_kernel.dylib 0x00007fff86ac06d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff85029eec _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff85029cb3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 4:: Dispatch queue: <MDSDiskStore 0x7fd026826400 shutdown:NO got shutdown notification:NO>
0 libsystem_kernel.dylib 0x00007fff86ac0ae6 fsync + 10
1 com.apple.spotlight.index 0x000000010537b38b fd_sync + 381
2 com.apple.spotlight.index 0x00000001053a71d8 _CIMetaInfoSync + 157
3 com.apple.spotlight.index 0x00000001053a73ad CIMetaInfoCreate + 377
4 com.apple.spotlight.index 0x00000001052dfbaa SICreateNewIndex + 1106
5 mds 0x0000000105182318 0x10514c000 + 221976
6 mds 0x0000000105181a7a 0x10514c000 + 219770
7 mds 0x0000000105173868 0x10514c000 + 161896
8 mds 0x00000001051cd47e 0x10514c000 + 529534
9 mds 0x00000001051b4962 0x10514c000 + 428386
10 mds 0x00000001051b4b21 0x10514c000 + 428833
11 libdispatch.dylib 0x00007fff8d81b0b6 _dispatch_client_callout + 8
12 libdispatch.dylib 0x00007fff8d81c47f _dispatch_queue_drain + 235
13 libdispatch.dylib 0x00007fff8d81c2f1 _dispatch_queue_invoke + 52
14 libdispatch.dylib 0x00007fff8d81c1c3 _dispatch_worker_thread2 + 249
15 libsystem_c.dylib 0x00007fff85029cab _pthread_wqthread + 404
16 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 5:
0 libsystem_kernel.dylib 0x00007fff86ac06d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff85029eec _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff85029cb3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 6:
0 libsystem_kernel.dylib 0x00007fff86ac06d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff85029eec _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff85029cb3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 7:
0 libsystem_kernel.dylib 0x00007fff86ac0ffa read + 10
1 mds 0x0000000105155ced 0x10514c000 + 40173
2 libsystem_c.dylib 0x00007fff85027742 _pthread_start + 327
3 libsystem_c.dylib 0x00007fff85014181 thread_start + 13
Thread 8:
0 libsystem_kernel.dylib 0x00007fff86ac06d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff85029eec _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff85029cb3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 9 Crashed:: Dispatch queue: <MDSDiskStore 0x7fd02500ac00 shutdown:NO got shutdown notification:NO>
0 com.apple.spotlight.index 0x00000001052ecffc SISetTransactionCount + 212
1 mds 0x00000001051f951f 0x10514c000 + 709919
2 mds 0x00000001051fa08f 0x10514c000 + 712847
3 mds 0x0000000105172b82 0x10514c000 + 158594
4 mds 0x0000000105181eb1 0x10514c000 + 220849
5 mds 0x0000000105173868 0x10514c000 + 161896
6 mds 0x00000001051cd47e 0x10514c000 + 529534
7 mds 0x00000001051b4962 0x10514c000 + 428386
8 mds 0x00000001051b4b21 0x10514c000 + 428833
9 libdispatch.dylib 0x00007fff8d81b0b6 _dispatch_client_callout + 8
10 libdispatch.dylib 0x00007fff8d81c47f _dispatch_queue_drain + 235
11 libdispatch.dylib 0x00007fff8d81c2f1 _dispatch_queue_invoke + 52
12 libdispatch.dylib 0x00007fff8d81c1c3 _dispatch_worker_thread2 + 249
13 libsystem_c.dylib 0x00007fff85029cab _pthread_wqthread + 404
14 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 10:: Dispatch queue: <MDSDiskStore 0x7fd026820400 shutdown:NO got shutdown notification:NO>
0 libsystem_kernel.dylib 0x00007fff86abfb26 __fcntl + 10
1 libsystem_kernel.dylib 0x00007fff86abf0cb fcntl + 232
2 com.apple.spotlight.index 0x000000010537b303 fd_sync + 245
3 com.apple.spotlight.index 0x00000001054164f7 dirty_datastore_locked + 263
4 com.apple.spotlight.index 0x000000010541e025 add_dirty_chunk + 195
5 com.apple.spotlight.index 0x0000000105417b48 page_alloc + 290
6 com.apple.spotlight.index 0x0000000105417987 db2_store_obj + 325
7 com.apple.spotlight.index 0x00000001052d730d si_create_indexmetadata + 213
8 com.apple.spotlight.index 0x00000001052e5933 SIInitIndex + 15244
9 com.apple.spotlight.index 0x00000001052e0bc2 SICreateNewIndex + 5226
10 mds 0x0000000105182318 0x10514c000 + 221976
11 mds 0x0000000105181a7a 0x10514c000 + 219770
12 mds 0x0000000105173868 0x10514c000 + 161896
13 mds 0x00000001051cd47e 0x10514c000 + 529534
14 mds 0x00000001051b4962 0x10514c000 + 428386
15 mds 0x00000001051b4b21 0x10514c000 + 428833
16 libdispatch.dylib 0x00007fff8d81b0b6 _dispatch_client_callout + 8
17 libdispatch.dylib 0x00007fff8d81c47f _dispatch_queue_drain + 235
18 libdispatch.dylib 0x00007fff8d81c2f1 _dispatch_queue_invoke + 52
19 libdispatch.dylib 0x00007fff8d81c1c3 _dispatch_worker_thread2 + 249
20 libsystem_c.dylib 0x00007fff85029cab _pthread_wqthread + 404
21 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 11:: Dispatch queue: <MDSDiskStore 0x7fd027807a00 shutdown:NO got shutdown notification:NO>
0 libsystem_kernel.dylib 0x00007fff86ac0fbe pwrite + 10
1 com.apple.spotlight.index 0x00000001053a6f02 _copyFile + 981
2 com.apple.spotlight.index 0x00000001053a70f4 copyFile + 12
3 com.apple.spotlight.index 0x000000010541213d db2_update_datastore_state + 163
4 com.apple.spotlight.index 0x00000001052dde36 _SIOpenIndex + 3670
5 com.apple.spotlight.index 0x00000001052e0ea8 SIOpenIndex + 282
6 mds 0x0000000105182396 0x10514c000 + 222102
7 mds 0x0000000105181854 0x10514c000 + 219220
8 mds 0x0000000105173868 0x10514c000 + 161896
9 mds 0x00000001051cd47e 0x10514c000 + 529534
10 mds 0x00000001051b4962 0x10514c000 + 428386
11 mds 0x00000001051b4b21 0x10514c000 + 428833
12 libdispatch.dylib 0x00007fff8d81b0b6 _dispatch_client_callout + 8
13 libdispatch.dylib 0x00007fff8d81c47f _dispatch_queue_drain + 235
14 libdispatch.dylib 0x00007fff8d81c2f1 _dispatch_queue_invoke + 52
15 libdispatch.dylib 0x00007fff8d81c1c3 _dispatch_worker_thread2 + 249
16 libsystem_c.dylib 0x00007fff85029cab _pthread_wqthread + 404
17 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 12:
0 libsystem_kernel.dylib 0x00007fff86ac06d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff85029eec _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff85029cb3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 13:: Dispatch queue: <MDSDiskStore 0x7fd02300ee00 shutdown:NO got shutdown notification:NO>
0 libsystem_kernel.dylib 0x00007fff86ac0fbe pwrite + 10
1 com.apple.spotlight.index 0x00000001053a6f02 _copyFile + 981
2 com.apple.spotlight.index 0x00000001053a70f4 copyFile + 12
3 com.apple.spotlight.index 0x000000010541213d db2_update_datastore_state + 163
4 com.apple.spotlight.index 0x00000001052dde36 _SIOpenIndex + 3670
5 com.apple.spotlight.index 0x00000001052e0ea8 SIOpenIndex + 282
6 mds 0x0000000105182396 0x10514c000 + 222102
7 mds 0x0000000105181854 0x10514c000 + 219220
8 mds 0x0000000105173868 0x10514c000 + 161896
9 mds 0x00000001051cd47e 0x10514c000 + 529534
10 mds 0x00000001051b4962 0x10514c000 + 428386
11 mds 0x00000001051b4b21 0x10514c000 + 428833
12 libdispatch.dylib 0x00007fff8d81b0b6 _dispatch_client_callout + 8
13 libdispatch.dylib 0x00007fff8d81c47f _dispatch_queue_drain + 235
14 libdispatch.dylib 0x00007fff8d81c2f1 _dispatch_queue_invoke + 52
15 libdispatch.dylib 0x00007fff8d81c1c3 _dispatch_worker_thread2 + 249
16 libsystem_c.dylib 0x00007fff85029cab _pthread_wqthread + 404
17 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 14:
0 libsystem_kernel.dylib 0x00007fff86ac06d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff85029eec _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff85029cb3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 15:
0 libsystem_kernel.dylib 0x00007fff86ac06d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff85029eec _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff85029cb3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 16:
0 libsystem_kernel.dylib 0x00007fff86ac06d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff85029eec _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff85029cb3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff85014171 start_wqthread + 13
Thread 9 crashed with X86 Thread State (64-bit):
rax: 0x00000000ffffffff rbx: 0x0000000000000000 rcx: 0x0000000000000000 rdx: 0x0000000000000082
rdi: 0x00007fd022829e00 rsi: 0x0000000000000001 rbp: 0x0000000105b6dfd0 rsp: 0x0000000105b6df50
r8: 0x0000000000000024 r9: 0x0000000000000000 r10: 0x00000001054b2ae8 r11: 0x00000001052ecf28
r12: 0x0000000000000100 r13: 0x0000000000000001 r14: 0x00007fd022829e00 r15: 0x00007fd022848c00
rip: 0x00000001052ecffc rfl: 0x0000000000010246 cr2: 0x0000000000000008
Logical CPU: 0
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 1
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 308
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=147.5M resident=115.1M(78%) swapped_out_or_unallocated=32.4M(22%)
Writable regions: Total=174.9M written=6084K(3%) resident=7420K(4%) swapped_out=0K(0%) unallocated=167.7M(96%)
REGION TYPE VIRTUAL
=========== =======
MALLOC 127.8M
MALLOC guard page 80K
Memory tag=241 136K
Memory tag=243 (reserved) 30.0M reserved VM address space (unallocated)
Memory tag=244 320K
STACK GUARD 56.1M
Stack 16.1M
VM_ALLOCATE 8K
__DATA 12.1M
__IMAGE 528K
__LINKEDIT 53.7M
__TEXT 93.8M
__UNICODE 544K
mapped file 18.6M
shared memory 308K
=========== =======
TOTAL 410.1M
TOTAL, minus reserved VM space 380.1M -
Built in iSight Not working- tried everything here so far?
I'm having the "Camera in use by another app" error with my built in iSight on a dual core Macbook Pro. My cam worked in 10.5, but I started getting the error with the 10.5.1 upgrade. Photobooth and Quicktime both can access the camera fine.
Per Apple Tech Support's recommendations, I've uninstalled and reinstalled iChat, zapped PRAM and SMC, trashed various prefs and generally done everything but revert back to 10.5. Tried the ecamm software. Now both Apple Tech Support and I are stumped...If you have tried all of those and it does not appear in the Apple System Profiler then it is time for....
Shut any Airport Card.
Shut Computer down.
If Ethenet disconnect on end from computer of modem.
Restart Comouter with no internet connection
Restart iChat
Reconnect internet
Log into AIM
Do you have a camera now ?
7:44 PM Thursday; November 22, 2007 -
Trackpad two finger scroll, zoom and rotation does not work, tried everything
After I updated to lion my trackpad zoom, scroll and rotation feautres won´t work. I´ve tried tip I could find ( restarting, updating to mavericks, enabling them in system preferences, using terminal ect)
I made an guest account as well, the features work there, but not on my main account and it´s starting to annoy me. Please help
I have a macbook pro from 2010
2,4 GHz intel core 2 du
4gb 1067 mhz ddr3
os x 10.9.1Try to reset the PRAM.
http://support.apple.com/kb/PH14222
If that doesn't do it, reset the SMC.
http://support.apple.com/kb/ht3964 -
Sound not working -- Tried everything
Just installed Arch Linux for x86_64 and have XFCE 4.8.0 up.
My problem is that audio doesn't work from the speakers.
When I plug in my headphones to the jack, I can hear the audio fine. But the speakers on my monitor won't work.
Note: every thing worked fine with Ubuntu 11.04 with the same hardware.
Here's relevant info:
lspci
aplay -l
lsmod|grep '^snd' | column -t
ls -l /dev/snd
sudo cat /proc/asound/modules
I hope I've provided enough information. I did follow the wiki on Advanced Linux Sound Architecture, yet to no avail I come to you.
Please help me out.
Last edited by jasonwryan (2011-08-09 03:28:33)maybe the output is muted. Check your volume mixer for any muted channels.
OR
run alsamixer from a terminal and (to remove all doubt) unmute every channel. A channel is not muted if the 00 at the bottom of the volume bar has a green background. This can be toggled by pushing 'm'. Also make sure to use the arrow keys to go as far left and right as you can. Some bars can hide out off screen.
If that doesn't work, try the function key 'f6' within alsamixer to select any other sound cards alsa has registered. The volume you need to mess with might not be default. e.g. if somehow the default card is something like a built in webcam mic.
Esc quits alsamixer
alsamixer is included in the package alsa-utils.
I don't know if xfce4-mixer exposes all the options alsamixer does (or if it provides even more)
Edit: potentially useful check
amixer|egrep '^[^ ]|\[(off|on)\]'
or
grep -P "\t(name|value)" /var/lib/alsa/asound.state
Last edited by _will (2011-08-09 03:41:27) -
the ringer of my iphone 4s is not working but when itried to go in setting then sound and tried to change ringtone the ringer is working..pls help
Check the mute switch along the side, near the external volume controls.
-
The volume not working on my iphone 4s
The volume not working on my iphone 4s
I had the same problem as well for nearly 3 months.
I had tried bring the Iphone into my phone carrier and they sent me to the AppleStore. When I brought it to them they hooked it up to the diagnostic machine and they told me just to restart the Iphone from the factory settings.
This didn't work either. To complicate things more, other "solutions" seem to only yield temporary success. These temporary solutions included: blowing compressed air into every port, various restart combinations, various factory restore methods.
I had nearly given up until I stumbled upon a support post on Apple's website that finally yielded success.
http://support.apple.com/kb/TS1630
The solution for me is listed as line 7, which reads:
"Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris."
Apparently, this cylinder shaped, mesh area is in some way tied to what triggers the headphones/speaker selection. I am not sure how, but I can say that after gently brushing it out my sounds are working again; specifically my music is now able to play directly off the speakers and my Iphone apps all play their sounds agian.
Hope this helps you as well!
Maybe you are looking for
-
Why is my iPod Touch 4G switching the charging symbol?
My iPod touch 4g is about a year and 4 months old on the fourteenth of June. My original apple charger was breaking and it couldn't change the iPod normally because it kept flashing back and forth on the charging symbol. One minute it would saying ch
-
Loading a file and setting the values in a Jtextfield
Hi all, I've created a save and open menu option for my application. The save option works as it writes to file using jFileChooser. However when using the open file option the program opens the correct file and stores the strings read into a string v
-
Whether I need to have a microsoft outlook email address to sync.
Palm Z22, windows vista 32, using outlook calendar. Do I have to have a microsoft outlook email to just use the calendar application? I do not like all of that extra email stuff on my computer. I just want to remove it. Thankyou. Post relates to: P
-
10.4.9 Update. Are there lots of problems out there?
Hi, I am about to use my Powerbook G4 1GHZ, 768 RAM, 60GB Hard Drive for a really important theatre gig next. I have upgraded it to 10.4.9. and am wondering if I should reinstall 10.4.8 if it is more stable than .9 I will be running an audio software
-
hello i am having a problem so relief is desired from anyone.i have to migrate some 200 reports built in 6i reports and most of them consists of parameter forms so is there any way to have the same functionality in 9i reports without much of the re-w