IPhone 4s will not communicate with iMac g5 PowerPc

I bought a new 32 gb iphone 4s and I can't load it from itunes
can't get my iphone 4s version 6 to be recognized by my iMac G5 powerpc version 10.5.8
iphoto recognizes iphone 4s and icon shows up for the device and, but not itunes, no icon at all.
itunes gives me message:
"The iPhone “Alvin Bruning’s 4S iPhone” cannot be used because it requires iTunes version 10.6.3 or later. Go to www.itunes.com to download the latest version of iTunes."
when in itunes i check for update itunes in menu and i get message:
"This version of iTunes (10.6) is the current version."
when i try to load latest itunes version 10.7 off Apple website i get the message:
"you can't open the application "read before you install itunes app" because it is supported on the architecture.

Sounds like Apple screwed me again. They just figured out a way to make my computer obsolete. Great, now Apple does no longer support the iMac PowerPC G5 link-up to my iPhone 4s. Can't sync with all the music I purchased because iTunes does not recognized my new phone. Wish they would have told me that before I bought a new iPhone 4s.
Go out and buy a new Apple computer? Sure that's a good idea, than I can see how much of my gear is incompatable with "IT". Thanks Apple for supporting "Windows" users and dropping the support of all the customers who have been true to you all these years.

Similar Messages

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my phone. I have updated my IMac and my MacBook Pro with iOS 10.8.2. Anyone have any suggestions? It was connecting with no problems prior to updating my two computers.

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my iPhone. The connection was working perfectly before I updated my IMac and my MacBook Pro to ios 10.8.2. I have had ios6 since I purchased the phone a couple of months ago. It searches for a network and finds them, but when it asks for my password, it will not accept the password. Have never had this happen before.

Hello krosebear,
Thank you for using Apple Support Communities.
If you are having difficulties connecting your iPhone to a Wi-Fi network, the following article should provide troubleshooting that should help you resolve the issue.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Regards,
Jeff D.

Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac. Any solutions?

Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac. Any suggestions please?

Yes, it did. I have not had any problem with my iPad pairing, just the iPhone. Thank you
Pam

HT3593 I have a OS X 10.4.11 and my new iphone 4 will not sync with it. I get a message that says i need a 10.5 or higher. what can I do?

I have a OS X 10.4.11 and my new iphone 4 will not sync with it. I get a message that says i need a 10.5 or higher. what can I do?

Hi
I have exactly the same problem.
My computer seems to match the Leopard 10.5 system requirements as follows:
Hardware Overview:
Machine Name:        iMac G5
Machine Model:        PowerMac8,2
CPU Type:                  PowerPC G5 (3.0)
Number Of CPUs:        1
CPU Speed:                  1.8 GHz
L2 Cache (per CPU):    512 KB
Memory:                       512 MB
Bus Speed:                  600 MHz
Boot ROM Version:    5.2.5f1
Serial Number:
What do I do next to upgrade the system from OS X 10.4.11?
Thanks
Theresa

Why won't my iphone 3gs will not sync with itunes???

My Iphone 3GS will not sync with itunes on my iMac computer. Currently the device is plugged in and recieving a charge. I am operating the version 10.6 in itunes and the version OS5.1 on the 3GS. Can anyone help me figure this out?!?!?!

try this article
iOS: Device not recognized in iTunes for Mac OS X
Products Affected
iPad, iPhone, iPod touch, iTunes 10 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
Symptoms
If your iPhone, iPad, or iPod touch does not appear under Devices in iTunes after you connect it to your Mac, refer to the troubleshooting suggestions below.
Resolution
Note: This article is for Mac OS X users. If you are using a Windows PC, please refer to iOS: Device not recognized in iTunes for Windows.
To begin troubleshooting this issue on your iOS device, first follow the steps in the appropriate troubleshooting assistant below:
iPhone Troubleshooting Assistant
iPod touch Troubleshooting Assistant
iPad Troubleshooting Assistant
If the issue persists after following the troubleshooting assistant, continue with the steps below, testing to see if the issue is resolved after each section.
Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch. iTunes 10 and later requires Mac OS X v10.5.8 or later.
Update to the latest version of iTunes and Install software updates on your Mac.
Check USB connections. iOS devices require USB 2.0 to function properly. If you are not sure if your Mac has USB 2.0 ports, refer to the computer's specifications. Disconnect other USB devices, and connect your device directly to a USB port on your Mac.
Restart your Mac.
Mac OS X v10.6.8 or earlier only: Reinstall the Apple Mobile Device Service.
Additional Information
In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens, and you are using Mac OS X v10.6 (Snow Leopard), please follow the steps in this article.

FIXED (for me at least): iPhone 3gs will not sync with Gateway NV79

I’ve spent months trying to fix this miserable problem with getting my iPhone 3gs to sync with my new Gateway NV79. Gateway will not help. Their technical support is genuinely worthless. Microsoft blames Apple and Apple blames Gateway.
My old iPod Nano syncs to my Gateway NV79 without a problem. I’ve tried all of the proposed fixes but other posters with no success.
But I do believe I’ve discovered a real fix (for me at least). Here’s my setup:
• Gateway NV79 running Windows 7 64 bit edition
• iTunes 10
• iPhone 3gs running OS 4.02
The USB ports needs tweaking to get the iPhone 3gs to sync to the Gateway NV79. Follow these steps without your iPhone 3gs connected to the Gateway NV79:
Step 1: Go to Control Panel
1. Open Control Panel
2. Click Hardware & Sound
3. Click Power Options
4. Make sure Balanced is selected and click Change Plan Settings
5. Click Change advanced power settings
6. Expand USB Settings
7. Expand USB selective suspend setting
8. Change On Battery setting to Disabled.
9. Change Plugged in setting to Disabled
10. Click OK
Step 2: Go to Windows Explorer
1. Open Windows Explorer
2. Right-Click Computer (not your computer name)
3. Click Properties
4. Click Device Manager
5. Expand Universal Serial Bus Controllers
6. Right-click first Generic USB Hub
7. Click Properties
8. Click Power Management
9. Uncheck Allow the computer to turn off this device to save power
10. Click OK
11. Right-click second Generic USB Hub
12. Click Properties
13. Click Power Management
14. Uncheck Allow the computer to turn off this device to save power
15. Click OK
16. Restart your computer
After your computer restarts, login and connect your iPhone.
You must complete both steps. Step 1 is required for Step 2 to stick.
There are a few things that may happen. iTunes may start syncing immediately and fail with an error. Don’t worry. If the sync fails the first time, restart the computer with the iPhone still connected. Now, iTunes will either take you to setup screen to connect your iPhone or the sync may restart. In my case, the setup screen came up and I DID NOT CHOOSE TO RESTORE. Pick the first option to add your iPhone. The sync will restart and may or may not finish. Don’t worry, if the sync fails, restart your computer again with the iPhone still connected and this time the sync will work.
Here’s the problem: the iPhone 3gs will not sync with the power management enabled for the USB ports on the Gateway NV79.
Good luck.

If you cannot update your computer, you will not be able to sync your phone. The requirements are:
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later (free download from www.itunes.com/download)
iTunes Store account
Internet access

Iphone 4 will not sync with itunes on Windows 7 64 bit

My iphone 4 will not sync with itunes on Windows 7 64 bit. My computer recognizes the iphone but Itunes does not. Any suggestions?

First it told me to uninstall itunes and install a windows 64 bit version which I did, the phone still won't sync
At the same time the itunes won't access the store
I've never accessed the store before or synced the phone
I live in a country without apple stores and geniuses so this is really the only way someone can help me

My iphone 5 will not sync with my macbook pro. it says my computer is no longer authorized to download purchased items from the iphone

my iphone 5 will not sync with my macbook pro. it says my computer is no longer authorized to download purchased items from the iphone. However, when I go to authorize my computer, it says it is already authorized. How do I fix this?

You can't change the Apple ID that the Authorize dialog comes up with by default. It's showing you that Apple ID for a reason: it means that the items you want to play were purchased using that Apple ID and therefore you need to authorize your computer with that Apple ID. Changing the Apple ID given completely defeats the entire purpose.
If you don't know the password to the given Apple ID, then you will no longer be able to play those items.

My wireless hp printer will not communicate with my hp pc

my wireless hp printer will not communicate with my pc

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - Wireless LAN or bluetooth?
Running the diagnostics at http://www/hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My iphone 4s will not sync with my mac(10.4.11),itunes(9.2.1), but will sync with iphoto,

my Iphone 4s will not sync with my mac(10.4.11) itunes (9.2.1) but will open iphoto and download photos.

Printed right on the box:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download from
You will have to updare to at least Leopard if you want to use your phone with your computer.

My iPhone 4 will not sync with 2012 Acura TL

My iPhone 4 will not sync with 2012 Acura TL.

Define "sync with". Does it establish a bluetooth connection for handsfree use? Are you having a problem with contacts? The iPhone supports PBAP (Phone Book Access Protocol) for accessing contacts. PBAP will pull your contact list automatically at connection time. If your system wants you to transfer your contacts, it's probably using rSAP (Rrmote SIM Access Protocol). The iPhone does not support rSAP. Most modern smartphones don't base on my understanding, but I'm not an expert on Android so I won't swear to that.
You may be able to get your system updated by the dealer.

Iphone 4 will not sync with iphoto

Iphone four will not sync with iphoto, error message appears. any suggestions?

Currently downloading upgrades from the "Software Updates" so hopefully that will help,
Which updates are these? For iPhoto or for you phone's operating system?
If you plan on upgrading iPhoto it will require a purchase of the iLife 11 disk from a 3rd party retailer like Amazon.com
or
upgrading your MBP to Mavericks and downloading the latest version, 9.5, from the App Store for free.
OT

Iphone 4 will not sync with itunes. I tunes will freeze when it says waiting for sync to start . I can not put any media on my device ! please help !!!

Please help me figure out why my iphone 4 will not sync with itunes. I wish to prevent wiping the device clean if possible.
thanks,
Brian

I have had exactly the same problem before, I have followed the guide as suggested to the letter and still no joy, each time (3 times now) that I have reinstalled the latest version of iTunes it is recognised and syncs with my iphone but with the next reboot of my computer it is gone again.
Try to refer this article about [how to transfer iPhone contents to computer|http://www.softwarebbs.com/wiki/Howto_transer_or_backup_iPhone_contents_toPC].
Hope it works you out.

Iphone 4 will not sync with cloud, just tells me it failed and try again for the past month

my iphone 4 will not sync with teh cloud. I tried deletaing the backup on the cloud adn starting a new one, I tried resetting cloud on my iphone adn still an error that jsut says it had an error and try again later for over a month now. any suggestions?

Hi not sure if Im leaving this is in the right place but here is my issue:
I have an iphone 4s and everything is working, including syncing it except that I have shot two videos that are 30 and 60 minutes that are not showing up on itunes. Therefore, I cannot save them and delete them off my phone. Curiously, when I view my phone on itunes it is showing on the content summary (color coded bar on the bottom of the screen) that the 'other' type content is 13 GB. I don't have other content and I am positive itunes is not recognizing them as video but 'other'. Any thoughts on this? My phone is full and don't want to delete these two interviews I shot. Thanks.

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation.

IPhone 4s will not communicate with iMac g5 PowerPc

Similar Messages

Maybe you are looking for