IPhone 4S will not recognize Q2 BlueAnt

I got the iPhone 4S back in October and it would not recognize the Q2 BlueAnt Bluetooth. I read somewhere online (can't find it now) how to get it synced up by pressing and holding some buttons in some fashion, but now it escapes me.  My phone was stolen and replaced but now I can't get this new phone to recognize the Q2.  I know there is some sort of sequence I should be doing (think of Nintendo's "Contra" code) but I can't find it anywhere. Any help?

I just upgraded from iPhone 3GS to 4S.  Initially the 4S could not find the bluetooth and the bluetooth could not find the phone.
To get the 4S to recognize my Blueant Q2, I had to clear the pair list on the BlueAnt.
http://www.myblueant.com/downloads/manuals/Q2_UserGuide_EN.pdf
This didn't work on my first try; I had to carefully observe the instructions to quickly press all three buttons at once (vol +, vol -, and master control), without holding them down.  BlueAnt needs to announce that it has been reset.  After that, it immediately appeared on my phone's Bluetooth list.
HTH

Similar Messages

  • HT4913 My IPhone 5 will not recognize that I have an Itunes Match account.  When I try to turn the Itunes Match button on in settings I get a mesage saying I am not subscribed to ITunes Match.  This does not happen with my Ipad.  Any Ideas what to do?

    My IPhone 5 will not recognize that I have an Itunes Match account.  When I try to turn the Itunes Match button on in settings I get a mesage saying I am not subscribed to ITunes Match.  This does not happen with my Ipad.  Any Ideas what to do?

    SharmFarm wrote:
    Good ev Ning Mario49    firstly I would like to say a great thank you for your attention to trying to help me,,,,,    i have looked at the links and will try everything stated first thing…
    Hi Mario,,,,
    I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
    I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
    Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
    Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
    Please advise,???
    I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
    Thank you again
    D

  • APE11 will not recognize any blu-ray media

    I have APE11 and attempting to burn a project to blu-ray. My problem is that APE11 recognizes the blu-ray burner but will not recognize any blu-ray discs. I have tried various BD-R and BD-R DL discs to no avail. I receive a "Media not present" message. If I select the same burner but choose to create a DVD, I receive a "Incompatible disc" message. This leads me that it sees the discs but I'm not sure what's up with the blu-ray option. The blu-ray discs are Verbatim and Windows recognizes the discs as well. Any and all suggestions are welcome.

    robertjeffrey
    What Blu-ray burner do you have? Is it recognized in the Device Manager under DVD/CD-ROM drives? Driver and Firmware up to date?
    What burn software came with the Blu-ray burner? If it is part of the CyberLink family, can you use the PowerProducer of the series to burn to Blu-ray disc format on a Blu-ray disc using these Blu-ray discs that Premiere Elements burn dialog is labelling "Media Not Present"? I would like to see the results of that test if possible.
    Just to get it out of the way (maybe helpful), let us flush the preferences...
    Assuming your Premiere Elements 11 is on Windows 7 or 8 64 bit....
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    11
    and in the 11 Folder is the Adobe Premiere Elements Prefs Folder that you delete. If that does not work, then delete the whole 11 Folder in which it exists.Make sure that you are working with Folder Options/Show Hidden Files, Folders, and Drives active so that you can see the path described.
    If that does not work, a complete Deactivation from Help Menu/Deactivate followed by the usual Control Panel uninstalled followed by reinstall may be in order. I am hoping the results from a CyberLink PowerProducer burn to may give us some valuable information so that we do not have to resort to uninstall/reinstall.
    Are you using BD-R 25 GB 2X? What is this BD-R DL? Is that the 50 GB for Blu-ray? Do you have any BD-RE 25 GB 6X? How much are you planning on putting on this Blu-ray disc in terms of Space Required and duration?
    Let us start here and then we can decide what next.
    Thanks.
    ATR

  • HT1400 I purchased a new chip but my iPhone 4S will not recognize the new chip so what do I need to do?

    I purchased a new chip but my iPhone 4S will not recognize the new chip so what do I need to do?

    okay from reading posts it seems if I transfer my backed up info from my old comp to the new one and erase my dad's phone's back up i could reset my phone and it would transfer all my old data back onto the phone, be linked to the new computer and i could proceed.  Where do i find the backed up info from my phone?

  • IPhone 4s will not recognize wi-fi signals

    My iPhone 4s will not recognize or connect to any wi-fi.  I've rebooted phone and my personal router, but this did not work.  Phone is not recognizing wi-fi in public places with free wi-fi or other private signals.  Any help?

    Try this: Settings > General > Reset > Reset Network Settings (Will delete all saved wifi passwords) but, it might work

  • My iphone 4s will not recognize the attempt to charge?

    My iphone 4s when I first recieved the phone it will just turn off and will not recognize the attempt to reset/restart the phone. Now the phone will not recogize the attempt to charge. I tried different cords, outlets, cord base things, and even the computer. When I plugged my phone into the computer it recognized the charge only when the phone was off. When the phone turned itself back on it no lo0nger recongnized the charge. The computer then popped up with a message that said device malfunctioned pc will not recognized device. What should I do? When I took the phone multiple times to my service provider about the previous problems they said "Oh, thats technology for ya!" Any advice?

    When I plug my phone into the computer tho it wont even reogize that it is there. If I reset my phone will I loose everything? Also which reset do I choose?
    Reset all Settings
    Erase All Content and Settings
    Reset Network Settings

  • Iphone 5s will not recognize sim card

    After updating to 8.1.1 iphone will not recognize sim card. Gives no service. Did reset all from the iphone since I couldn't use itune. Will appreciate assistance. This thing is driving me crazy

    Hello hnajee,
    The article linked below details a number of additional troubleshooting steps that may help restore your iPhone's ability to connect to your carrier's network.
    If you see No Service in the status bar of your iPhone or iPad
    http://support.apple.com/en-us/TS4429
    Cheers,
    Allen

  • IPhone 3Gs will NOT recognize iTunes NOR charge with my PC but ....

    My iPhone 3Gs (16GBytes white model) will NOT show up on iTunes NOR charge with my PC but it will charge with the wall plug.
    My iPhone 3Gs IMEI: 01 203100 586260 3
    It is an unlocked iPhone purchased directly from one of Apple store online in Asia.
    I am currently traveling in Asia and using a local SIM card.
    All of a sudden today, it will not charge on my laptop. It still charges on the wall plug. I suspect that it has to do with me plugging the phone into another public but older PC (running Windows XP) - was attempting to charge my phone but that public PC did not show that it was charging or recognizing the iPhone.
    It will not charge or sync no matter what I do. I tried using the power button + home button. I tried holding the home button then plugging in the USB cable. I tried erasing all the data on the phone. All of the above failed.
    Now I have the screen where it shows that I have to plug in the USB cable to activate my phone!
    Help! Help! Help! Help! Help! Help! Help! Help! Help! Help! Help! Help! Help!

    3194 usually means one of the following:
    You don't have the latest version of iTunes
    You are trying to downgrade the phone to a version lower than 5.0.1
    Your phone has been jailbroken or hacked to use with a carrier other than the carrier it is locked to

  • My Iphone 4 will not recognize my Dell computer.

    The first day the IOS 7 came out, I downloaded it. This past weekend I put a lot of new songs on my library and now I wish to sync them on my Iphone. I can plug my Iphone into my computer and it will charge. When I unlock my Iphone it will ask me if I can trust my computer. Everytime I atempt syncing I have tried unpluging and pluginging it back in. It just asks me again. I went into my General settings, and to the part where it says "Sync over wifi". It says I need to connect my Iphone and nothing happens. It tells me the last time I synced it to the computer so I dont understand why it wont do anything. Is there something I missed? I have all the current softwears on both my Iphone and Itunes.

    Hello Sara
    Check out the articles below to get your iPhone to show back up in iTunes to get you syncing again.
    iOS: 'Trust This Computer' alert
    http://support.apple.com/kb/HT5868
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My iPhone 4 will not recognize my caldav account after changing my yahoo password, if I wipe the phone

    IF I wipe my iPhone & reinstall my apps, will they have the information I put in them in the past?

    Hello Sara
    Check out the articles below to get your iPhone to show back up in iTunes to get you syncing again.
    iOS: 'Trust This Computer' alert
    http://support.apple.com/kb/HT5868
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My iPhone 5 will not recognize my bluetooth.

    I have tried resetting my network connections and that has not helped. I am sure the bluetooth is working properly but I can't get my iPhone 5 to recognize it

    A bluetooth what?
    Phone?
    Computer?
    GPS?
    Stereo?
    Phone?
    Music headset?
    Telephone headset?
    What?

  • New P755 3dv20, will not recognize/play Blu-Rays

    It recognizes and plays regular DVDs just fine, but Blu-Ray's cannot be read either in Toshiba's video player or in Windows Media Player. Kind of defeats the purpose of having purchased a 3D laptop if I can't even play my 3D movies.
    The drive is a Mat**bleep**a BD-CMB UJ141EL, I can't find any manufacturer website for this company, nor can I find any driver updates for this device on Toshiba's downloads page or elsewhere. Has anyone else come across this problem?

    Satellite P755-3DV20 Specifications
    Satellite P755-3DV20 Downloads
    Before doing anything else, let's try this Microsoft Fix It:
    Fix problems with CD or DVD drives that can’t read or write media
    Let us know what happens. Good luck.
    Mike

  • My iPhone 4s will not recognize my Airport Extreme network

    I just purchased the AirPort Extreme.  I have come home and set it up.  My iPads connect quickly and easily... but my iPhone 3 and 4s do not even see the network?  They did and then it went away?  Why?

    t connects to wifi and 3g no problem.
    If it connects to 3G, it's connected to the phone network.  3G carries both voice and data.  Your phone can't show BOTH 3G and No Service at the same time.

  • My iPhone 5 will not recognize my charger (bought at apple recently), what can I do?

    I bought a 6' lighting charger chord recently (within last 4-5 months) at an apple store, and suddenly it won't charge my phone.
    Is there anything I can do?

    If you delete the 1080p version from iTunes (but rescue the file from the trash in case you need it in the future), then go to iTunes Preferences and change download option to SD or 720p HD you should be able to redownload from the cloud under the Store's Purchased section.
    I used to download SD and both HD formats but of late I use the AppleTV 1 less and only get the 1080p HD, though should probably getthe other versions in case I need them one day as they may not be there forever.  It's fiddly to download all 3 formats as you have to mess around with settings but can be done.
    I like to have a copy as there is no guarantee the files will be in iTunes cloud forever.
    AC

  • My iphone 4 will not recognize any blutoooth devices

    I purchased this phone from an apple store... it was a refurb. The bluetooth stopped working soon after the warranty  was up. I have tryied almost everything short of taking it apart and swaping out the MB.(?)
    I have several bluetooth headsets none are 'discovered'. I have tried updating software, tuning bluetooth off and on. and restoring the phone.. ( which is a royal pain!)..
    I am wondering if there is any tricks to getting the phone to do a systems check,find a problem and show an error code.. or what part I would actually need to replace..??
    thanks

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Maybe you are looking for

  • Error in Transport the info object

    Dear all, i am trying to transport  the info object 0CM_CTAR during transpot i am getting the error as Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding but i checked in development i  not got any error but when i am trasport iam gett

  • PSE6 Catalog/Organizer

    I have noticed that when I backup the organizer it appears that I get a copy of every photo I have in My Pictures file folders but not in file folders, just random order. Is this normal and does this mean I have double the photos? Can I delete the ra

  • PDP issue - ext reqts missing in SRM system

    We are using SRM 4.0 and R/3 release 4.7 and implementing the PDP (plan driven procurement) scenario. The purchase req is sent from R/3 to SRM, but this requisition is not going as an external reqt in the SRM system. We get an error in SLG1 - "Enter

  • 9.4.1 update super slow

    It is taking my brand new Macbook Pro over 2 hours to update the iphoto update 9.4.1 released on Oct. 1.  Is this normal?  I realize it is pretty big at 1.14 GB, but it is still downloading...

  • How to scale on iPad3 and iPad1

    I'm using Air 3.4 and 3.5 and I trying understand how to get the same app to be the same scale as the iPad 1 on the iPad 3. The tried using stage.stageScale = StageScaleMode.SHOW_ALL, it's not scaling. Is there something else I need to do to get this