IPhone 4s won't power down

Recently I have noticed that my iphone will not power down.  I go to turn it off and it goes through the process of shutting itself down and then after two seconds magically turns itself back on again.  After this happening several times I have tried pretty much everything to fix it.  I have tried resetting the settings, deleting data and settings, full restore and cleaned out the charging port but all to no avail.  The problem continues.  Has anyone actually had this problem fixed?  Would be nice to be able to power my phone off, especially with filights to catch in the near future.

https://discussions.apple.com/thread/4055724?start=0&tstart=0

Similar Messages

  • Iphone 4 won't power down.

    When I select shutoff, I get the spinning wheel, as soon as it powers down, I immediatly see the white apple symbol and it powers right back up.  I tried a restore via Itunes. Didn't work.

    Try holding both the on and off buttons(top and bottom of phone) at the same time and keep holding until the apple sign comes up then let go and wait, worth a try.

  • My iphone won't power down and stays on all the time.  I have rebooted but it still wont power down. any solutions?

    My iphone stays on all the time and won't power down.  I have tried rebooting but it still won't power down. any suggestions?

    i mean that after i use my phone it won't go to a black screen after a few minutes...i guess maybe its called to 'sleep' but the screen stays bright...the light doesnt dim.

  • Zen Vision:M 30GB won't power down; any ide

    I've had a 30GB Zen Vision M for a couple of months now! Awesome player, went through the usual round of recognition problems, but it's been working fine of late. My problem is, it won't power down now. When I try to power down, the unit says it's powering down, the dispaly goes black except for the battery icon. And it stops there. The blue backlight on the menu buttons stays on, the battery icon stays on, and eventually it turns off after 5 minutes because of being idle. Not a terrible problem I know, but a real niusance. I am running the most current firmware (have been for a while). I've tried resetting and clean-up. No change. I'm afraid of trying to reinstall the firmware, in case I have the same problem that many others are having, and go from a good player with a power issue, to a player that does nothing. I can't see it being the power switch itself, since it powers up fine, and tries to power down. Any ideas or advice would be greatly appreciated. birder

    Hello Dsgrov,
    Welcome to Creative forums!
    You can get a lot of results if you search "Zen Vision M not charging" on the search box.
    Here's one, you might want to check this thread.

  • My iPod won't power down?

    Hello
    I have an iPod Nano that I keep on a radio/alarm clock thing. Sometimes when I take it off it won't power down. Does anyone know how I can get it to power down?

    SOmetimes you just have to wait a few seconds after pausing it and/or removing it from the dock before shutting it down. This is normal. If it still won't shut down after ten seconds or so, you might try holding the MENU and SELECT (center) buttons until you see the Apple logo to reset it - then see if it'll shut down.
    Cheers!
    -Bryan

  • Ipod won't power down

    I can't get my ipod to power down. It's constantly staying on, draining the battery. It won't power down automatically or manually by holding down play/pause.

    I found another question and answer about the same issue, and was able to correct the problem.

  • Please Help! My iPhone 4 won't power on!

    iPhone 4, out of warranty coverage, won't power on.
        1.    It has about 60% battery before it dead, but suddenly it became black screen and not responsive (like powered off).
        2.    Whatever I did, like "holding the power button and home button together for 10-25 sec and then pressing the power button again" etc. it just won't power on, no Apple logo!
        3.    But I can seen the "emergancy call" screen when I plugged it with my laptop and it just told me "No Service" at the upper left corner (status bar of iPhone 4).
        4.    iTunes can see it, but only when it was in Recovery mode or DFU mode.
        5.    I also tried to restore it to factory settings in iTunes, but it always gives me an error with various error codes, like 2001, 2006, etc. I also tried restore it under Windows or Mac, but was out of luck too!
        6.    Finally I bought a iPhone 4 battery replacement and replaced the old one with the new one, but nothing changed as if it wasn't replaced its original battery.
        7.    It keeps rebooting at every 10 min or so when It was plugged into my laptop without any operations (pressing any buttons).
        8.    It can be "powered on" only when it was plugged into a computer. It will IMMEDIATELY be in "dead mode" as long as I disconnect it from the computer (like taking out a battery from an iPhone that is powered on)!
        9.    Everything worked fine before it dead, I don't know what happened to it! I am so frustrated!
    Please help! Thank you so much!

    USB Problem, possibly bad Cable.
    I misread your original post "It keeps rebooting at every 10 min or so when It was plugged into my laptop".
    I thought you had a boot loop problem, but you say "rebooting when plugged into laptop" this is not the typical boot loop problem, because you had the iPhone connected to laptop.
    Connected by what, obvioulsy a USB Cable, Error 2006, is most often due to faulty USB Cable.
    Clean that Dock Port Very Well especially with Isopropyll Alcohol, get a good USB Cable, try a different USB port on computer, or try a different computer.

  • Muvo T200 Won't Power down or pause

    I bought a muvo t200 for my husband for his birthday (as a match to my own). Aftger upgrading the firmware to .03.03 it will turn on, but won't pause or power down. About one in three times, pressing the power down button causes it to either skip to the designated shortcut or go to the options. the rest of the menu seems to be working ok.
    Any suggestions?
    Thank you in advance for helping out!
    - Clarinda

    Can you try resetting it to see if that helps?
    Insert and remove a straightened paperclip from the Reset Hole.
    If this does not work, you probably need to format the player.
    WARNING: This step deletes all your player's content. If possible, back up all your player's content on your computer before proceeding.
    1. Make sure your player is connected to your computer and you are logged on in Administrator mode. For details about Administrator mode, see your operating system's documentation.
    2. In Windows Explorer, right-click your player and select Format.

  • 5th Gen 60G Won't Power Down-NO SLEEP

    My 5th gen 60g's are not powering down, the backlight will go off, but they will NOT power down! I've reset, re-installed and used factory defaults, but they still drain down the battery because they WON"T SHUT OFF

    I'm looking into the same problem. A friend has a 5G 30GB video that's having insomnia. I've restored it a couple of times using itunes 8.0.1, and the firmware is version 1.3.
    It's got a few problems. One is that it won't go to sleep by itself at all. If I enable the sleep menu option and select it, it "sorta tries to" go to sleep - i.e. the clickwheel stops responding but the screen stays on (if the backlight is set to "always on" then that also stays on). The clickwheel stops responding to swizzling until I press a button.
    Also, when I do a reset (hold down center/menu buttons) it forgets all the menu and clickwheel settings when it reboots and even asks me to choose the language again. I believe this only started happening in the last couple of weeks. I don't know if a firmware upgrade triggered it.
    It's chewing up the battery very quickly the way it is. I've loaned the owner my old 20GB photo for the time being and this one will sit on a charger until a solution appears
    I hope someone at apple spots this and writes a patch!
    Thanks
    Matt.

  • Macbook won't power down

    Bought a brand new Aluminum Macbook 4 days ago, and it worked perfectly for the fisrt 3 days, but today it has decided to not power down or let me log off. When I try to shut it down, it acts normally at first, closing out all my open apps but then it just does nothing and won't turn off.

    Have you tried holding down the power (on/off) button to force shut down?

  • 4S won't power down only go to sleep mode.

    4S top button won't power off only go to sleep mode.How can I power the phone down?

    Thanks - Sometimes this works and then it doesn't always do the trick. I wonder if there is a combination of buttons that could be pushed to shut the phone down?

  • HT201401 IPhone 4S will not power down- just resets.

    Last couple weeks I haven't been able to power down my iPhone.
    1) I press & hold the power button until the power off slider appears.
    2) I slide the slider to power off.
    3) iPhone displays the 'spinner' while shutting down.
    4) iPhone goes blank for 500-1000 ms.
    5) iPhone displays the white apple logo and reboots.
    I first noticed this on a flight last week.

    When USP charging cable is connected to both the live wall charger and iphone,
    the iPhone will succesfully 'Slide to Power Off'.
    When the USB cable is not connected the following:
    1. Hold down power button until "Slide to power off appears".
    2. Slide the slider.
    3. Iphone gets the spinny wheel.
    4. Screen goes dark for a second.
    5. Apple logo then appears and the iphone eventually turns back on.
    6. No Apps are installed on this 4S.
    7. Restored on iTunes several times, No change.
    8. Changed USB Cable, No change.
    9. Cleaned Connector port w/ brand new, Clean, soft tootbrush, No change.
    10. Blown clean air into the connetor, No change.
    Any New developments / suggestions?????????????

  • IPhone 3GS, won't power on at all.

    Hi,
    earlier today, when I plugged my phone in to charge, it started with the usual symbol for charging, from a flat battery, then after having to step away for a short while, I pressed the on button and a white screen would appear, no icons etc.
    I tried to do a restore, but with ios4 now out it insisted on that being installed, and it failed, there was an error message with a code, but it came and went to quickly, and now it won't power on at all.
    Any ideas.

    Good news, after searching the support section, and finding these http://www.apple.com/support/iphone/assistant/phone/#section_2 instructions about restarting, that got it back to the normal screen.
    I wasn't planning to update the software straight away, but since I've got it now...

  • My iPhone 5 won't power on. It crashed

    My iPhone 5 crashed.  It won't power on. What is the problem?

    Hi barbarafromdc,
    I'm sorry to hear you are having trouble with your iPhone.
    The article below will give you step-by-step instructions to work through this:
    iPhone: Hardware troubleshooting
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged. Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    I hope this information helps ....
    - Judy

  • RAID won't power down and then lost one of the 2 drives

    I tried to power down my RAID before leaving the studio last night and it would not shut down. Both RAID drives were functioning when I shut down my G5. I didn't shut down power to the RAID for fear I might corrupt or lose some files.
    Now one of the two drives (the lower one I think, labled Drive 2) is not mounting. I still haven't unplugged it. What should my next step be? HELP!!
    Thanks in advance.
    Dual G5   Mac OS X (10.3.9)  

    Hi Brian,
    1) If you don't have a good backup policy, this should spur you to ensure you have one. You should ALWAYS have a backup policy, even with protected storage like Xserve RAID. Heck, large organizations have full offsite backups of their data on multi-million-dollar EMC Symmetrix and IBM Shark systems. Back up everything you can't afford to lose at a moment's notice.
    2) Once you have a backup, you may wish to upgrade to the 1.5 firmware, if you haven't already done so.

Maybe you are looking for

  • Getting SMTP error while calling outlookclient service

    Hi everyone, i am trying to get the events from calendar but i have got the following error. "The SMTP address has no mailbox associated with it." Please let me know how to resolve this issue if anyone has faced it earlier. Thanks, Nitesh

  • Dvd player subtitles always on

    since I upgraded to 10.6, DVD player always has subtitles on. This is happening with rented  dvd's.  no matter what I turn off in the control menus, subtititles are always displayed.  anyone else with this issue?

  • PerformanceCounter.NextValue with static value of Performance Monitor

    Hi ! I have one question about the documentation "PerformanceCounter.NextValue Method for .Net Framework 4.5". In the remark note we have the following: If the calculated value of a counter depends on two counter reads, the first read operation retur

  • UPLOAD TEXT DATA IN ORACLE

    My Dear Friends I have a text file as follows aaaaa, aaaaaa, aaaaaa how i can upload same in oracle table any body can help me thanks in advance Rgds Muhammad Tahir Khan (TeeJay)

  • Palette Design in CS2

    Hi All, I am working on the Photoshop CS2 SDK to convert CMYK color space to Gray color  where all photoshop samples are modal dialogs. Is it possible to design non-modal dialog like Palette.If possible where i can get samples?. Any advice or samples