IPhone 4s won't turn on after auto shut down !! Any Help ??

i was playing with my new 4s and left it in my pocket for an hour or more,when i took it out, the screen was blackout and could not on at all.i've had tried to press the sleep and home buttons together for many times,it can't helps at all.

This just happened to me today. Not sure what to do as yours was the only discussion like this.
Please let me know if you were able to restore it and how?
Extremely frustrated since it was brand spankin new!!

Similar Messages

  • MacBook Pro 15" won't turn on after a shut down.

    My MacBook Pro 15" late 2008 mavericks won't turn on after a shut down. Tried SMC reset, plugged and unplugged charger multiple times as well as installing the battery. It has started that after a while I have replaced my old battery with a new one,upgraded to Mavericks and increased my memory to 4GB. In the beginning after I would install every time the battery ,it' would turn on after 8-10 tries. Today it's completely unresponsive . Tested different outlets, with and without battery,nothing worked. I also heard that some other people have this issue once they have updated their operating system from  10.5.8 to Mavericks. Is that the problem.? Has anyone found a solution to this?

    Hi there Olgabinou,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    -Griff W. 

  • IMac won't turn on after scheduled shut down

    Hi, hope someone here can help me!
    I have a 20" 2006 iMac. While it was still under warranty, it repeatedly froze, and eventually when I turned it on the screen remained blank although I could hear that the hard drive was at least trying to get started. I got it repaired (new logic board, new screen), but now I am having some of the other difficulties mentioned here, where the screen freezes when using graphic intense software, including 3D games. Sometimes, it works fine for hours, others less than 2 minutes. I used to keep it on all the time, with energy saver set to go to sleep when possible. I've found, though that the graphics problems are less likely to happen if it has been off at least overnight, so I set up the schedule for it to turn itself off in the small hours. The problem is, when I go to turn it back on, it won't come on unless i pull out the power cable from the back of it and put it back in again. Any ideas what's causing this? And any ideas on what I can do to fix it?
    Thanks

    This just happened to me today. Not sure what to do as yours was the only discussion like this.
    Please let me know if you were able to restore it and how?
    Extremely frustrated since it was brand spankin new!!

  • Iphone 5 won't turn on after a download

    iphone 5 won't turn on after a download

    Hello amonar,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    Have a nice day,
    Mario

  • HT1222 iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?

    iPhone 5s won't turn on after this update. Battery was at 98%, tried holding sleep & home button while plugged in, no good. Any ideas?

    P.S. I just noticed; when I hold the power and home button at the same time while it's plugged in as if I was going to restart it, my computer acts as if I'd plugged it in again (it makes the USB notification sound, itunes opens up again, I get the same "your iphone is in recovery mode" message, etc.), but that's the only response I've been able to get from pressing anything on the iphone. thanks again.

  • Iphone 5s won't turn on after the update

    iphone 5s won't turn on after downloaded recent update

    Hey lillyluv2010!
    Here is an article for you that will help you troubleshoot this issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • My iphone 3G won't turn on after I installed fonts

    My iphone 3G won't turn on and it just stuck on apple logo then loading then turn off then that apple logo appears again .Please help me to fix this problem

    As I thought, which means your iPhone has been hacked, which is not supported by Apple directly or indirectly via these discussions. You need to contact whoever you downloaded the garbage from that allowed you to hack your iPhone and/or the garbage fonts for support with this.

  • USB external HD does not turn off after system shut down

    This is not a new issue in Leopard. I had this issue also in Tiger but I never bothered to ask whether there may be a solution to this issue.
    I have firewire as well as USB HDs attached to my iMac. If I put my computer to sleep both the firewire and the USB HDs turn themselves off. The HDs come back to live after I reawake the Mac. But if I turn off the iMac then only the firewire HDs turn themselves off. The USB HDs remain turned on.
    Is there a setting somewhere that can be changed so that the USB external HDs turn themselves off after system shut down?

    Detlef Schmitt wrote:
    This is not a new issue in Leopard. I had this issue also in Tiger but I never bothered to ask whether there may be a solution to this issue.
    I have firewire as well as USB HDs attached to my iMac. If I put my computer to sleep both the firewire and the USB HDs turn themselves off. The HDs come back to live after I reawake the Mac. But if I turn off the iMac then only the firewire HDs turn themselves off. The USB HDs remain turned on.
    Is there a setting somewhere that can be changed so that the USB external HDs turn themselves off after system shut down?
    Since the issue is not a Leopard issue, and maybe not even a Tiger issue, you might check with the drive manufacturer for some assistance.
    Does the drive turn off when you eject it and then pull out the USB plug? That's important.
    Message was edited by: nerowolfe

  • IPhone 4 won't turn on after iOS 6 upgrade

    After updating my iphone 4 to iOS6 it won't turn on. The apple logo keeps flashing on a black screen - as it does when it's about to load, then never does load. What to do?

    Hold down Power on/off and home button at same time, when apple logo appears again release.
    If still have same problem force recovery mode restore with iTunes, set up as new first making sure phone goes to home screen.
    If all good - restore from back up
    good luck...

  • Iphone 5 won't turn on after 8.3 update

    I just updated to the 8.3 and now my phone won't turn on. I've tried holding the buttons down and nothing. I don't want to do a factory restart!!! So what are my options now?

    Hello PyroTheRedBean,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting in the article linked to below for your iPhone not turning on.
    iOS: Not responding or does not turn on
    Take care,
    Alex H.

  • IMac won't turn on (has been shutting down abruptly in the past)

    Okay, hi everyone.
    I've got a second hand iMac G3. It had problems with the hard drive earlier, so that's been replaced...
    In the past month and a bit my computer has been abruptly turning off (not completely, the white light of the power button is still on when this happens) with no aparant cause. The screen just goes black like turning of a TV screen and I can't do anything but turn it completely off by holding the power button.
    After this happens I would try and turn it back on, almost imedeiatly, but it wouldn't turn on: The power button would light up, and blink just slightly, with a slight tick/beep sound to accompany it. This is only straight afterwards though, if I leave it for a while then boot it up, it will be fine.
    A lot of the time this has happened when I've just walked away from the computer without it doing anything, other times it happens right in the middle of doing something..
    I haven't followed up the problem due to not knowing what it was at first and lack of time, especially this past month since I've been away overseas.
    And now it's the last time it's shut down on me. I tried to start it up again straight afterwards, and of course the power light blinked slightly along with the accompaning sound. Turned it off, tried again a bit later, still didn't work. Now when I try to turn it on I press the power button, it lights up for a second then turns off. So my computer wont turn on, and I don't know what to do.
    Hope one of you guys know what the problem is.
    I was looking at these threads and someone had a similar problem (http://discussions.apple.com/thread.jspa?threadID=1168792&tstart=0), something about the flyback transformer I think, whatever that is. Does anyhone think this could be the problem??
    Another thing. Just days ago I was having problems burning cd's (probably still am), something about error code 0x8002006D and not being able to calibrate enough laser power. I don't know if this has anything to do with it...
    Thanx for putting up with me, usually it's my dad but he's asleep sick..

    No Kittytom is referring to his having found that his iMac wouldn't boot right side up but would upside down. Further circuit disturbance showed that it was bad soldering on the Flyback transformer that was the problem.
    Also common were bad soldering on the HV capacitors in the area of the FT. Or just bad capacitors.
    If your iMac had cap problems it would exibit that behavior.
    Slow breakdown in the insulation of the FT would also act like that.
    Richard

  • My Imac won't turn on. Randomly shut down and randomly shuts off

    Yesterday night i was working on my imac and left it on for about an hour leaving the desk. When i came back it was shut down and wasn't able to turn it on. This morning i unplugged it and plugged it to another plug and it turned on. After a while it turned of again and wouldn't turn on. I re-changed plugs here and there with random success. I then changed the the ram as i had put 2x2gb instead of the original 1x1gb si i replaced the original one and it turned on. So to make sure it was the ram i re-inserted the 2gb but it wouldn't turn on and to my great disappointment it wouldn't turn on when i re-inserted the 1gb original ram either... Bit lost. Not sure if it has to do with temperature issues?
    Please help!!!!

    Sounds like either an unseated or bad Ram module.
    Try pushing real hard on each module with both thumbs to insure that they are firmly seated in the slots.

  • Media keys won't turn off when computer shuts down

    I've been experiencing a problem with the media keys on my P305-S8834 laptop running vista 64.  The computer will shut down completely, but the media key lights remain on.  They will go off when I start and shut down the computer a couple of times.  This problem is recent.  Up to about two weeks ago the shutdown was normal.  Appreciate any help with this.
    Solved!
    Go to Solution.

    Satellite P305D-S8834
    Media key problems like that are sometimes solved by resetting the motherboard.
    With the battery and AC adapter removed, close the Power switch for 30 seconds.
    Re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.
    -Jerry

  • After itunes software update on vista, itunes shuts down - any help?

    After I update itunes, Windows says that it needs to shut down the application due to an unexpected error.  Windows support says to repair itunes.  I process the repair, then itunes shuts down "unexpectedly" again.  Windows supports says to repair again. Same circle..... itunes never works.  I am using Vista.  Any thoughts?

    I did this and it still gave me the microsoft error " itunes has stopped working.  A problem caused the program to stop working correctly.  Windos will close the program and notify you is a solution is available".  same circle again.

  • IPhone 4 Won't Turn On After Application Crash

    I have a 32 GB iPhone 4, which I got on a data plan in late October, and has been working fine until now. I was playing around with an application (Hipstamatic), and the app kept crashing, finally after the 2nd or 3rd time, the screen went completely blank, and since then it has not responded to anything, iTunes won't recognize it, I tried the home button, power button reset procedure, nothing. I cleaned the phone with disinfectant about 15-20 minutes before, would that have anything to do with it? I often clean my phone, without any problems, I just hope I haven't shorted the **** thing out. I called it from another phone but couldn't get through. It has never been jailbroken.
    Message was edited by: dave2889
    Message was edited by: dave2889

    See if you can force the phone into recovery mode:
    Turn off your phone: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone to turn off. If you cannot turn off your phone using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When your phone turns off, release the Sleep/Wake and Home buttons. Then, leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

Maybe you are looking for

  • Is there a way to expand all the options in the accordion menu?

    I would like to have all the tabs in the accordion menu expanded. Is there a setting or button to have all the options expanded? Thanks.

  • Iphotos not showing up in iMovie project

    I am dragging my photos from iphoto into iMovie to add to a new project.  Then when I play the project, they are not showing up.  What is going wrong?

  • How to build query which list only active PC's

    Hi guys, I have to install SCCM client on many devices in my enviroment. Unfortunately, SCCM has found amny devices which still have accounts in AD but are not used for looong time. I would like to list only devices, which hasen't installed SCCM clie

  • Remove same numbers from table

    Is here sombody who knows how te remove all the same rows out of the table, it will help a lot. Mvg Kenny Attachments: table.docx ‏191 KB

  • Doubt on EDI/ALE

    hi folks,         i have one basic doubt XApps...what is the differenece betwwen ALE and EDI. when do we go for which scenario......cld ay one xplain me in detal...thnx in advance...              santosh...