Iphone 4s wont turn on unless plugged in

HHEEEELLLPPP......only bought the phone in Jan 12. Got iphone 4s. I havent used it or had it switched on for few weeks...then today tried to turn it on but it wouldnt...thought battery was low so connected to lap top but it didnt do anything. So i plugged it in to power supply and it comes on and said battery was almost full (86%) it kept turning itself on/off then as soon as unplug it it turns back off.
I managed to get it whilst plugged in to laptop to start restoring it but then it stops with error code 1602.....my iphone is now in recovery mode but still doesnt switch on or anything when plug into laptop until i hold power/home buttons together.....and comes on when plugged into power plug.
Any idea wat problem could be or how to fix it????

was kinda hoping would be able to get it sorted without doing that as there isnt a store that close to me :-/ ive booked a call back so hopefully they might be able to help

Similar Messages

  • HT1369 iphone 4 wont turn on unless plugged in,then stuck in recovery and wont restore with error 21,PLEASE HELP

    please i tried everything,when its plugged in wall it turns on but goes to the connect to itunes screen,same when connecting to pc. The second i unplug it it turns off. i tried EVERYTHING from holding off and home to new battery,itunes will pull up and say phones in restore mode i follow instructions and it stops at end saying error 21.please help

    ok i got worst migraine,been doing this a week now.i tried everything in that support as much as i could understand,im not saying im dumb but not the smartest girl for computer stuff.I also did diagnostic test in itunes and it passed all but the connection test and says port (dang i forgot again) something about the port and it was the only thing to fail,the rest passed.does this mean anything? this *** i was using my cell and it just turned off and now all this happened. did i mention it wont turn on unless plugged in wall or computer?

  • HT4972 My ipods screen is black and wont turn on unless plugged into the wall

    My ipods screen is black and wont turn on unless plugged into the wall not the computer but when i plug it into the computer and put it in DFU mode it wont restore there is an error 3194 and error 1602 and nothing i do helps

    Here's what I found about error 1602:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert,update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194 is also seen when somebody is trying to restore jailbroken devices.

  • IPhone 4s wont turn on? Plugged in for half an hour?

    My iPhone 4s wont turn on, it's been plugged in for half an hour (to the wall, if it matters). When I try to turn it, the battery pops up. It doesn't show the plug, so there isn't anything wrong with the charger and it is charging. Why won't it turn on? How can I fix this?

    Reset the phone by holding the HOME and SLEEP buttons until an Apple logo appears. If that doesn't resolve the problem you may have a bad battery.

  • My iphone 4 wont turn on unless its on charge, but i need ios 6 update? whilst its on charge it says i have to connect to itunes but the phone turns off before i have plugged it in the computer

    NEED HELP UPDATING
    MY PHONE WONT TURN ON ONLY WHILE IT ON CHARGE
    BUT I NEED IOS 6 UPDATE

    Hello, chloea_2012. 
    Thank you for using Apple Support Communities. 
    Here are a couple articles that will help troubleshoot this issue. 
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If you receive any error messages while updating your iOS device, this article provides some helpful troubleshooting steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Regards,
    Jason H. 

  • My 4month old Macbook pro wont turn on unless plugged in, but remains on after unplugged.

    I got a brand new macbook pro 4months old.  What happens is it does not turn un unless it is plugged in when I unplug it though it is fine and will run till it dies, BUT if I were to close it and put it to sleep it will not turn back on. I would have to plug it back in and turn it on then I can unplug it and it will be fine till it falls back asleep.
    Once I do turn it back on, a pop up says that I need to re adjust the clock and another trying to search for the internet, even if I was already connected with is 5 min ago. Even apps like tweetdeck and facbook would reset and I would have to enter all my information again, where as before it would just remain there.
    I have NO idea why it is like this and I am not really familiar with a Mac and its OS but any information would be greatly appreciate!
    Thanks!
    Yoshi

    Bring it to an Apple store or AASP. You are under warranty.

  • 6th gen ipod nano wont turn on unless plugged in

    I have a 6th gen ipod nano and it will only turn on when plugged into the computer, as soon as I unplug it it turns off. I have tried re-starting it and nothing seems to work

    Did you manage to resolve this problem as i have this problem aswell

  • Iphone wont turn on unless plugged in

    I went to get a ZAGG invisibleSHIELD done on my iphone, after the installation, my iphone keeps rebooting to the apple logo without going into the menu screen, and the power button (top button) doesn't work.
    However, everything works perfectly when it is plugged into a power source (both the wall plug and to a computer). It turns on fine, with as if nothing is wrong. I don't even need the itune to boot it.
    Now if unplugged it works fine until the screen turns off automatically. If I were to turn on the phone within seconds then its fine, but if left "off" then the phone refuses to turn back on, until it is plugged into a power source again.
    (sometimes it goes back to the apple logo, and does the whole boot up/turn off thing.)
    I assumed that some liquid seeped into the phone since nothing was installed, or "changed", but what i don't understand was why the phone works perfectly if plugged in.
    I left the phone to "dry" for 24hrs, and now the top power button works, and it was working perfectly fine all afternoon, till an hr ago where it refuses to turn back on again.
    So is it some "bug" in the system or is it really that some moisture seeped into the phone?

    well the headphone moisture sensor is white. i can't locate the docking port one however i dont see anything pink or red.
    well the update on the phone is that after the 3rd day, the phone works perfectly fine now, however the power button is only 1/2 as sensitive as before. it needs to be pressed down hard to turn on, while sometimes the button remains non responsive.
    So im guessing that some liquid was dripped into the power button causing the phone to malfunction because it was receiving random power on/off signals.

  • Iphone will not turn on unless plugged into outlet, and then says activation needed

    It worked fine before class, when I left class to check my phone, it wouln't turn on. If I plug it into the wall outlet and it shows the red battery indicating it has no charge, then goes to the apple logo screen for a few minutes before turning on and saying activation required. It was trying to make me go through the steps of activating it. If i unplug it, it will turn back off. It will not power up if I plug it into the computer, and it does not show up as a device on my computer. I have tried holding down the home and power button to reset it, and this does not work. I bought the phone when it first came out, Im trying to avoid taking it the the Apple store because it is 2 hours away.

    What troubleshooting have you tried? Try a reset, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. If it does not, then you need to try and restore via iTunes. Try connecting the phone to the computer and iTunes and see if it is recognized. If not, you will have to force it into Recovery mode and restore. See this support document for that help. http://support.apple.com/kb/HT1808

  • HT201210 my ipod wont turn on unless its plugged into the charger?

    my ipod touch wont turn on unless plugged into charger what should i do?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem (very likely), make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Likely a bad battery.
    Apple Retail Store - Genius Bar          

  • My iphone is fully charged but it will not turn on unless plugged into a charger

    my iphone is fully charged but it will not turn on unless plugged into the charger in the wall, it wont even turn on when connected to the computer!!!!!!!

    Hi there. Any luck with your phone? I'm having the same problem

  • Iphone wont turn on. i plug it into charger and it stays at 87% and then i take it out of the charger and it shuts off. and then i try to turn it on and wont turn back on until i plug it back into the charger. HELP ME PLEASE!!

    iphone wont turn on. i plug it into charger and it stays at 87% and then i take it out of the charger and it shuts off. and then i try to turn it on and wont turn back on until i plug it back into the charger. HELP ME PLEASE!! how do i fix this?!

    Hello StephanieeLovezYou,
    Thank you for the details of the issue you are experiencing with your iPhone.  I would be concerned too if my iPhone was only turning on when connected to power.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Good day please help me, my iphone 5 wont turn on.  i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, i

    good day please help me, my iphone 5 wont turn on.  i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.

    Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.

  • My iphone 5s wont turn on. I tried to recover it through itunes and it didnt work. It said that due to an error my phone could not be restored. However when I plug it into itunes via my computer it turns on, I get the apple, the white line beneath it?????

    My iphone 5s wont turn on. I tried to recover it through itunes and it didnt work. It said that due to an error my phone could not be restored. However when I plug it into itunes via my computer it turns on, I get the apple, the white line beneath it???? As soon as I remove it from the computer it goes completly off again???????

    Hey beaches37,
    Thanks for the question. I understand you are experiencing issues with your iPhone 5s. You mentioned you received an error when attempting to restore. If you remember this error, the following article may help to resolve it:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Furthermore, you may want to try restoring your iPhone in recovery-mode:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • My Iphone 4 wont turn on, but if i have it plugged in the wall for in long time it turns on by itself and gets stuck at the apple logo

    My Iphone 4 wont turn on, but if i have it plugged in the wall for in long time it turns on by itself and gets stuck at the apple logo.
    i've tried everything but it still doesen't work, can you please hep me?

    First - Press both home button and switch on/off for 15 seconds it will reboot,If it does't work try 
    second -  connect ur iphone to system and open itunes then Press and hold both home button and switch on/off for 15 seconds phone will reboot then as soon as apple logo appears leave switch on/off without leaving home button it will go to restore mode then restore ur phone with latest version.
    Hope this will resolve ur issue but all ur data will be errased.
    Thanks

Maybe you are looking for

  • Relating with back ground jobs

    hi gurus, i have 3 fields on sel-screen.one for date of creation of sales order in range and three radiobuttons for yearly, quartly and monthly display of sales order. i am creating this pgm  to run in background. pls, help me out to write a logic to

  • CL_SALV_TABLE / FACTORY / DISPLAY

    I call the CL_SALV_TABLE methods FACTORY & DISPLAY multiple times to switch betweeen a detail and summary data view. However when I click on BACK button it goes back to previous view of ALV report. Is there a way to limit the ALV report level to 1, s

  • HT4461 Error 1004 please try again later?

    Sketch indicates an update but gives me an Error 1004 please try again later message, what does the number signify and when will it resolve. Also, I want a record of my purchase, unfortunately I have to prove my purchase before I 'may' get my update.

  • Is my software compatible with OS X server

    Hi, I'm a student and i'm interested in upgrading my MacBook Pro OS from Yosemite, to Yosemite Server. I currently don't have other computers where to install the server so I was planing on doing it on my laptop to start getting used to it as well as

  • InDesign 2.0.2 print problem

    I use a Mac G4 and am attempting to print on a Konica Minolta Magicolor laserjet 5450. I'm using Liddie Blacka nd Gil sans in a text only document. The same error of skipping spaces between letters when printing occurs no matter what I do. Though I h