IPhone 5 and Bang & Olufsen earset 3i headset: mutes when I plug it in
Hi all
I've done a sweep of the discussion boards can find no similar issue:
As the title says, when I plug in my B&O earset 3i into a 64Gb iPhone 5, the volume goes to silent/mute.
Has anyone else had the same experience and is there a way for me to stop this from happening?
Thanks in advance
Graeme
For those of you who bump into this question in the future:
The workaround I ended up using is that before I play a track after the headphones are plugged in, I increase the volume. Mildly annoying but not a deal breaker.
Oh, and the mute occurs when I use the headphone remote not when I plug in teh headset, as my question implied.
Similar Messages
-
I have just bought iphone 4 and when I make calls i don't hear anything from the headset excep when i plug in the headphones or turn on speaker ?
I have the same problem. It only started a few days ago. When I make or receive calls I have to use speaker otherwise I can't hear a thing. I'm also pretty sure that when I try to make calls without the speaker turned on, it doesn't actually dial, but the display says it has.
I've tried restoring from a backup with no luck. I'm reluctant to restore as a new phone as it's such a pain. -
I updated my iphone tonight and now my texting is crazy. When I text my daughter, the text comes to my iphone.
Hi sigrun from mo,
If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden -
My iphone was stolen, I used find my iphone app, and found that it was offline, however when tried locking mode option, I pressed remove device by mistake. Is there any way I can restore the iphone to my icloud/ apple Id again? No manual backup on laptop
The phone will automatically re-appear when it connects to the Internet. However, don't get your hopes up, as thieves know this & will make sure your phone never re-connects so you can locate it.
-
I have the iphone 4 and PC with Windows Vista Basic. When I bought my iPhone syncs with iTunes on my computer, but now when I try to sync it tells me that Mobile Device Service was closed and I can not synchronize the phone. Try restarting Mobile Device Service and uninstall and reinstall Itunes but still giving me the same error.
http://support.apple.com/kb/HT3965
-
i have the iphone 3gs and ive dropped it a few times. when i press the home and lock button, it will not turn on, but when i plug it in, it says in big font IOS 6 and when i slide it open it says connect to itunes or emergency call. it wont turn on when i plug it in to my pc. tips?
roush12345 wrote:
i ... it wont turn on when i plug it in to my pc.
Place the Device into Recovery mode... All data / Content will be Erased.
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
But... if the Device has been Modified... this will Not necessarily work -
I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks
You will want to open iPhoto, go to the iPhoto menu and select Preferences. Under the General tab, next to Connecting camera opens: select iPhoto. Close the preferences and quit iPhoto. Reconnect your iPhone 4. iPhoto should open automatically and offer to import your pictures. Import them and then do what you want with them.
Best of luck. -
Our picture transfer from iphone, ipads and or Sony DSC-W150 camera ended when we changed int providers from xfinity to frontier. All attempts to troubleshoot have not corrected problem. The only changes to the system that was functioning properly are Fios int service and router. All apple components are using the fios router. Can anyone Help get us up and running again? Thanks
How have you been making the physical connection from:
iPhone
iPads
Sony DSC-W150 camera
...to your Mac?
If WiFi, have you changed the WiFi encryption method or WiFi password? If so, each device need the new information netered into it manually to get onto your "new" WiFi Network. -
Hello, my iphone died and wont turn back on again even when i left it on the charger overnight, how can i get it to turn on?
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
iphone 4s stopped in middle of update (via wireless). apple logo and usb picture appeared on phone. When i plugged in to computer, indidcated I would have to restore. in the middle of restoring, i got a "unknown Error" (1) code and the apple id and usb picture are frozen on screen. Anyonw know what to do?
Hello Maxayla,
It sounds like you are getting error code 1 when you were attempting a restore. I would use these troubleshooting steps from the following article which mentions that error code:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#1
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I have an Iphone 3g and i can't turn on, but if i plug it on the Iphone charger i can see the Apple Logo but it quickly disappears(Apple Logo SOD) When I connect it to the computer it won't charge and it won't turn on, I tried DFU mode and it doesn't work. I tried STABBING IT(lol, it works sometimes) and i doesn't work again. If i can't connect it to the computer i can recover it but i know that it still works. WHAT SHOULD I DO!!!!!
http://reviews.cnet.com/8301-19512_7-10115048-233.html
http://support.apple.com/kb/TA38633
Apple suggest a removal and re-install of iTunes to get over the 1601 / 1602 error message.
Other sites suggest trying a different USB socket… direct to the PC / Mac not a hub.
edit to add usb info. -
I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
-
I got a new IPhone 4S to replace a IPhone 4 and I'm getting a error 4010 when I try to sync my music
I got a new IPhone 4S to replace a IPhone 4 and I'm getting a error 4010 when I try to sync my music
Well, if you're that anal retentive, take it to Apple and find out.
As fellow users, we can only guess as to what Apple may or may not do. -
I got a new iphone and entered all my new information, but when i plugged my new phone into the computer with all my old information, it synced that information onto my new phone. is there any way to reverse it?
While that may work9I do not think it will) with iTunes purchased music it will not work for other music.
- Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- For other music you will need a third-party program like one of those discussed here.
Copy music -
My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Setting up the current and noncurrent tabs
Hi all, I have created my own tabs I removed the <td>#tab cells#</td> from the page template(one level tab) and created like this <td height="27" align="left" valign="top"><table width="100%" height="27" border="0" cellpadding="0" cellspacing="0" bac
-
Exporting from Mac Mail to Outlook 2003 (XP)
Hi guys, odd one, just bought the wife a cheap and cheerful wintel laptop, and now in the hope that I can get my mac back for my exclusive use (I've shared for too long now), I'm trying to get her emails from mac mail into a PC format. I have an IMAP
-
I shut the lid and go to open the lid and the wifi is disconnected and the only way to connect to the wifi is to turn it off then back on and connect to my wifi. This is the only wifi that it happens with.
-
Values getting changed as if by reference
I have a situation where the values in the object is changed when its not supposed to Here is the sample of my code WOWSurvey newPrevSur = new WOWSurvey(); // i have defined newPrevSur newPrevSur.setDocumentTypeCode("xxxxxxx"); // I am setting an att
-
Java.io.IOException: Error in HTTP operation
hai My Application is working fine in emulator and working fine under Via OTA and also works fine in Nokia 7210 ,but i install in Nokia 6230i i got the error java.io.IOException: Error in HTTP operation,when i type the same url in Nokia 6230i browser