IPhone 5 Bluetooth Audio Problem w/ Car Stereo (Pioneer AVH-P3300BT)

I tried looking around to see if anyone else had this issue, and didn't find an answer.
I have a Pioneer AVH-P3300BT car stereo, and while it doesn't play music via bluetooth, it does have a very nice setup for talking on the phone.
It's always worked fine with my iPhone 4, 4S, and also several Android handsets. It even worked fine on my 4S after upgrading to iOS 6. But now I have an iPhone 5, and the audio quality is just horrendous. I can kind of hear the person on the other end, but according to whoever I'm talking to, my voice sounds garbled and "demonic". The iPhone 5 on iOS 6 is the only device this happens with. Is there a fix for this, or is it at least a known bug? I would hate for my expensive car audio setup to be rendered useless for the purpose I bought it.
The deck also displays other information from the connected phone, such as signal strength and battery level. When the iPhone 5 is connected, it shows a dead battery (even when full) and a completely full signal (which is almost never really true).
I can use the phone with my Plantronics bluetooth headset and there are no sound quality issues there.

Same here. Why doesn't anyone from support offer a Solution or at least reply????
This issue has nothing to do with your brand of audiosystem. I talked to quite a few iPhone 5-ers and they ALL have the same issue.
@Apple solve this!!!! And reply!!

Similar Messages

  • Iphone bluetooth problem with car stereo

    I bought a third party bluetooth adapter for my car stereo. Hooking it up with any other device ( other mp3 players, my husband's windows phone ) all work and stream music. Pairing it with my iphone 5 causes constant crackling and static like blown speakers. Same with the ipod touch. Is there a setting in the phone that will fix this?
    Thanks

    I had same issue on iPhone 4 using "ebay" type adapter but improved it
    with  Blackberry bluetooth receiver
    I however now have iPhone 5 wired in for perfect results

  • Ios8 Bluetooth audio out for car/headset

    I have connected my iphone to my car via bluetooth, I can make phone call via my car speaker&mic but How can I set up  Bluetooth audio out for car/headset?
    Thanks!

    I have this and also a car charger adaptor for it, but it doesn't work because Apple changed the volts on the charger.

  • Any Bluetooth audio problems since upgrading to ICS?

    Hi.
    Was wondering if anyone has had any Bluetooth audio problems since upgrading to ICS?  In particular, have you had any stuttering and/or pauses in streaming since the upgrade?
    I use a MW600 with my phone and I get stuttering and pauses every few minutes between the phone and the MW600 which is very annoying - to the point where I can't reliably use the phone for audio any more.
    Thanks
    Savcom

    Sorry but it seems to be a problem some users are experiencing. It's already been reported so hopefully there will be a fix for this soon.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Ios 5.0.1 + Iphone 4 bluetooth connection issue with car stereo

    My Iphone 4 will not connect with my new JVC car stereo I have spoken to JVC customer support and they say its an Apple issue that they need to fix (changed something with the bluetooth connection scripts in the latest update update, as they have done before).
    The phone finds the stereo and then tries to pair with it, however half way through the pairing process the phone losses connection with the stereo and the pairing is then deleted.
    I have deleted all the existing pairing in the phone memory and ensured that the stereo has been rebooted to ensure no conflict of previous installs would effect the process
    Does anyone know if Apple are going to fix this glitch in a new softwre update (and if so when is it being released) as at the minute i have an expensive stereo which is cant use to its full ability?

    Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
    I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all.  You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

  • No audio from iPad Mini over Pioneer AVH-P2400BT car stereo

    I purchased a Pioneer AVH-P2400BT in December and had it professionally installed. I use my iPhone 4s (iOS 6.1) with the Pioneer CD-IU51V cable to listen to music daily in the car. All works great! My problem is is that I also have an iPad Mini (iOS 6.0.2) that just will not play any sound on this stereo. I plug the Pioneer CD-IU51v cable into the lightning to Apple 30-pin adapter then plug that into the iPad Mini. It charges the iPad Mini, I have full functionality over apps etc on the iPad itself (not on the stereo) but no sound will come out of the stereo whatsoever. I uplug the cable and the iPad has sound. iPhone works fine... just the iPad Mini. Thoughts?

    moved to different forum

  • Blutooth Problem with car stereo and iPhone5

    Got new iPhone 5 yesterday and paired it with car stereo for handsfree use. When I make a call I can use radio answer button and the speakers.  When I receive a call I can only use handset. iPhone 4 worked fine so I doubt it is the car. I deleted and repaired the phone yet still the same issue. Help?

        Hey nippers1!
    It does sound like we have a conflict with your device and your car Bluetooth. Thanks for doing that great troubleshooting! I would like to ask, have you checked with your car manufacture to see if the phone was compatible with your car's Bluetooth? Sometimes different devices that have different Bluetooth profiles will work differently. Can other iPhone 5s connect at all? Can your iPhone 5 connect and use other Bluetooths fully? Also, are you having any problems with making and receiving calls in general? Also, is your device up to date? Please make sure it is on the most current software. Please report back!
    MichelleG_VZW
    Please follow us on Twitter @vzwsupport

  • Bluetooth audio problem and 2011 Mazda 3

    There is a great deal of conflicting information in regards to bluetooth audio compatibility and various cars (2011 Mazda 3 in my case) and the iphone 4... So I'm trying to get a straight answer!
    Anyway my car (according to Mazda) supports AVRCP 1.3, however when pairing to my Verizon iPhone (4.2.6), the car reports BT Audio (which denotes that the device has less than AVRCP 1.3 support).
    So question 1... Does the iphone support AVRCP 1.3 in its entirety or is it some limited incarnation of it or simply just A2DP?
    Question 2... The options that I have with BT Audio allow me to skip the track, but won't allow me to pause/stop (I hit the pause/stop and the audio stops for split second and then restarts) So what's the story here?
    Question 3... What am I supposed to expect from the iphone 4 in terms of bluetooth support? i.e.
    Plays blue tooth audio? (Yes it does that quite well in my car)
    Allows Skip, Pause functions from car controls? (It skips track, but NOT Pause)
    Shows current playing track? (Ok I'd assume that the most advanced smart phone on the planet would support this simple function, but I don't believe it does and if it doesn't...why not?)
    Answers anyone?

    brassman1234 wrote:
    So question 1... Does the iphone support AVRCP 1.3 in its entirety or is it some limited incarnation of it or simply just A2DP?
    Yes, the iPhone does support AVRCP. The Supported Bluetooth profiles article says that it supports "pause, play, stop, next track and previous track for AVRCP."
    When you look at Wikipedia, the AVRCP profile goes up to 1.4. It looks like the iPhone supports the 1.0 profile.
    Question 2... The options that I have with BT Audio allow me to skip the track, but won't allow me to pause/stop (I hit the pause/stop and the audio stops for split second and then restarts) So what's the story here?
    Thats all that AVRCP 1.0 supports.
    Question 3... What am I supposed to expect from the iphone 4 in terms of bluetooth support? i.e.
    Plays blue tooth audio? (Yes it does that quite well in my car)
    Allows Skip, Pause functions from car controls? (It skips track, but NOT Pause)
    Shows current playing track? (Ok I'd assume that the most advanced smart phone on the planet would support this simple function, but I don't believe it does and if it doesn't...why not?)
    The first article that I linked provides details about what bluetooth profiles are supported by the iPhone and what you can expect it to do.
    To get the most functionality, you'll want to keep your car stereo and your iPhone updated. Previous iOS updates have included support for more bluetooth profiles.
    WTH.

  • Iphone bluetooth audio streaming

    I have a 2011 Subaru Outback with the factory stereo. Bluetooth audio works great for me for calls and Siri. But I have yet to discover how streaming music works. I didn't think it was supported by my stereo at first, but then yesterday, out of the blue, my music app displayed the AirTunes logo and I could see the "CAR_MEDIA" name of my stereo listed there. I tried to select it and it disappeared and I haven't seen it since. Anyone else have this problem or know how to get music to stream through bluetooth?

    If the system supports A2DP audio, then it should work just fine. Depending on the system, you may not be able to control the music playback from the head unit, but it should stream. Check the manual for the stereo system.

  • After upgrade to ios 6 usb connection problems with car stereo

    Hi Everyone,
    after ios upgrade to ios6 i am not further able to use the iPhone 4s as music device - having usb connection problems ("not readable"). I am sure, that the upgrade ist the culprit; worked fine before. My car stereo is built in a Volvo XC 60; the device is connected via the standard usb cable by apple.
    Any Ideas?
    Thanks
    Ivo

    (same problem thread): see also https://discussions.apple.com/message/20185146#20185146 (not fixed)

  • IPhone 4S audio problems

    There was a lot of complaints in the forums until recently about audio problems in the iPhone 4S. Different people had different problems. Mine is that the person I am calling, or the person that is calling me, cannot hear me, although I can hear them. I never saw any mention of resolution to those problems. Does anyone have any idea what the resolution might be?

    I have a similar issue. I just installed a Jabra Drive and now, the default audio source is the Jabra...even when I am not near the device. When i answer a call, or make an outgoing call on my iPhone, I need to manually switch the audio source to the iPhone.
    This was never an issue with my Morotola H17 bluetooth ear piece.

  • App to Listen to Iphone (Calls & Music) on  my Car stereo/radio

    Is there an APP out there that would allow me to listen to my iPhone calls, music podcast etc. in my car my tuning to an unused FM radio frequency?

    I am looking for an APP and/or accessory that will allow me to listen to my iPhone calls and/or music via my car stereo radio.
    Is anything available?

  • T61 - Bluetooth audio problem

    My computer: Lenovo T61.
    System: Windows 7 64b.
    Bluetooth device manufacturer: Broadcom.
    I have severe problem with my bluetooth internal device. I wanted to connect my computer with external audio device (bluetooth speakers) and I found that my computer can connect to the device, but it's discovered as unknown bluetooth device.
    I tried installing various drivers versions, but it didn't help. I also noticed that in the device manager there are 3 various entries of 'unknown external bluetooth devices', which I believe that belong to the internal bluetooth device, but somehow they weren't installed. I tried various ways of manual installing the drivers of these 3 devices (I guess one of them is responsible for bluetooth audio), but I didn't succeed.
    I would be extremely grateful for help. I really don't know what to do more...

    Anyone?

  • I want to play iPad audio through the car stereo. Any suggestions?

    I will need to use an FM transmitter as I don't have an auxiliary input on the stereo.

    you can add an auxiliary audio adapter to almost any vehicle from 1998 and up using the external cd changer controls or satellite controls  car stereo aux input

  • IPhone no longer plays through car stereo after OS 4 upgrade.

    My wife and I upgraded to OS 4 on 6/21. Both will no longer play or charge through the USB connection to our car stereos. We both have Kenwood decks but different models.
    Any ideas?

    Did you look here?
    http://discussions.apple.com/thread.jspa?threadID=2470321&tstart=0

Maybe you are looking for

  • Round trip,[edit in ........]

    Hi , I use Photoshop cs5 and Lightroom 3.2 and I have a problem with "edit in Photoshop CS5" how do SAVE in Photoshop does not see a copy of the pictures in lightroom.

  • Assignment to CO Object in GRN loading

    Hai SAP Guru We have a problem, we are loading mass GRN's through "BAPI" , during the loading  it is giving the error A/c. 400000130 requires an  assignmen to CO object. We have even seen the material valuvation , it is given to the above GL account

  • Survey Results

    Hello, is it possible to use the functionality of surveys (or any similar) for the following scenario. Send out a questionaire to multiple participants and evaluate the result not as in survey suit as a summary, but also evaluate the individual answe

  • Hosting a blog on BC, connected to an outside website?

    I am designing a website in muse that that I am hosting through ixwebhosting using their ftp service. I am wanting to add a blog but the only option through muse is to use BC. Am i able to build a blog on BC that is connected directly to (both in des

  • IsInt() always returns false

    Why does the following code always return false:      public static boolean isInt(String[] input)                String temp="";                int isInt=0;                for(int i=0;i<input.length;i++)                     for(int j=0;j<input.length