****Iphone 5 blurry photos with ios7 Update**** Please Help
Looking for some answers as to why my iphone 5 photos are now blurry after the ios7.2 update.
-Cleaned the lens
-No protective film on the iphone camera lens
The camera worked fine before the update.
Picture below [iphone 5 on left Blurry]
Take the case off - is the issue still there?
Similar Messages
-
Iphone apps wont install or update - please help!
Hi. Hopefully someone can help me...
My iPhone 4s running iOS 6.1.3 wont let me install new apps or update existing apps. When i click on the button to buy a free or pay app the button changes to "install app". Then when i click on the install app button nothing happens ( no progress bar and no installation). After repeatedly clicking the install button the status changes to "install" as if it was installed...except it wasn't.
So far i've tried:
- logging out/in of iTunes account
- rebooting phone
- turning off / turning on phone
- resetting all settings
- deleting apps that required updating that wouldn't update
- deleting ibooks which had a pending download
Tried these multiple times without success in resolving the issue. Both wifi and 3G connection is fine.
Anyone gone through the same thing and have any suggestions? Help would be very much appreciated. Thanks
SHi, Use the Administrator account. Download the Uninstaller and SAVE it to your Desktop:
http://kb2.adobe.com/cps/141/tn_14157.html
Then download the Flash Player Installer for Firefox and SAVE it to your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe
Then downlad the Flash Player Installer for Internet Explorer and SAVE it to your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
Be sure to read over the Uninstaller instructions for system tray, and Make sure you use the Administrator Account.
When you have that done, Close ALL browsers. Run the Uninstaller and when finished, Reboot(restart) your computer.
When fully rebooted, Reboot again (to clear all old files out)
Then Run the Firefox Installer, then Run the IE Installer and when finished, Reboot Once.
Test both browsers here: http://www.adobe.com/software/flash/about/
Then Using IE, go to manage add ons (all add ons) and find Shockwave Flash Object and make sure it is Enabled.
Then Using FF, find the SWF vs 10.1.53.64 plug-in and make sure it is Enabled.
If you have any questions, just post.
Thanks,
eidnolb
Note: If you don't want Flash Player in IE, then ignore that link.
I would wait and Install Reader after a fix has been released. -
Email photos with info attached - please help
I have iphoto '09 8.1.2 (424). I want to send photos to my photography teacher with the info attached ( ISO, f-stop, etc.) Is this possible; what is the process? When I press option + command + i, I can see the info, but I don't know how to attach this info to the email. The photos go, but he info does not.
The info is not attached
The EXIF and IPTC data is part of your photo and is included when you send the photo. To see it you have to use a photo application
I suspect your teacher is not using a photo application to view the EXIF data
You can export the photo to the desktop checking the boxes to include everything and then use a program like simple EXIF viewer to look at the EXIF data prior to sending
LN -
Xcb broken with recent update (please help confirm)
Hi Guys,
I'm a heavy user of xdo but a very recent upgrade upgrade is causing this app to repeat continuously until another key is pressed. The list of packages upgraded have nothing in common with xdo, or more importantly the xcb/xcb-test libraries it uses. I made a very tiny sample app illustrating the problem using the xcb library. Could a couple people who have an up-to-date system please compile/run this app in the console? And also if someone who hasn't upgraded Arch since Jan 7th could also test please.
File: https://gist.github.com/saamalik/8464619
Library: pacman -S --needed libxcb
Compile as: gcc -o xcb-test -lm -lxcb -lxcb-xtest xcb-test.c
The character w (25) should be printed on your screen--what I see is that it prints 'w' continuously (wwww)--even though it should only print once. Thanks!Bump. Can anyone please test the snippet.
-
Serious issues with software updates - please help!
A few weeks ago, I installed the 10.6.3 update (standard, not combo), and after everything was said and done, I was left with an incredibly unstable system - virtually all non-Apple software would crash on launch. I repaired my permissions, repaired the hard drive (which was fine, just a precaution), zapped the PRAM, etc. Eventually I managed to download the 10.6.3 Combo Update, applied that over my previous busto patch, rebooted, and everything worked just fine.
Until yesterday.
Last night, I installed Security Update 2010-003 - and all of those problems came back. By the time I rebooted to go into "Safe Mode," I had somewhere in the neighborhood of 220 application crashes - the only apps I found that didn't crash were Safari and Disk Utility (and Finder, Dock, and things of that nature). Repaired permissions, rebooted, and...
Kernel panic. Safe Mode yielded a different kernel panic. Anything I did other than booting from a CD caused a kernel panic. So, I restored from my last Time Machine backup, and now everything is just fine.
So - I've now had two absolutely catastrophic software updates in a row. I'm not even sure what this suggests, as my machine was completely stable and working like a dream before each of these updates - and is back in the same condition now. Does anyone have suggestions on where I should be looking to see what is wrong, or tools I could run to figure out why my computer turns into a very angry paperweight after applying patches now?Hi C&A,
I know it may sound a lil freaky but i've done some research on this matter. It's basically a technical error in Apple's Software Updater, the connection between the internet & software disconnect or timeouts due to lack of high internet activity which is the main reason why the speed starts to decline while downloading the iTunes.
Solution. This would only work well if you've got a broadband, otherwise this can take alot of time.
*Start downloading iTunes from the updater, within 2 mins... log in to your Facebook, email, keep clicking on pages every 20-30 seconds, as this will keep the connection stable, keep doing this till the iTunes downloads completely. -
I used to be able to connect my 3GS iphone to my computer, select photos from my phone to transfer with no problem. Now, I can't see any of my photos in my phone. please help.
Theodore
Okay lets check few things. Tell me what you can see that is similar to mine. I'll be travelling today so I have soem time now and later tonight ... just so you don't thing I've "gone awol".
1. In iTunes, Preferences > Device Preferences if you want manual then you should set the iPhone from syncing automatically
2. Also check you have music in your iTunes Library
3. Then on your device tab =Music you select Sync Music, slect your playlists annd then select apply in the lower right corner.
Let me know -
I need to install the find my iPhone app on my ipad, it will not install. Any reasons. Do I need to change something in my settings? I am up to date with my ios7. Please help!
Try closing the App Store app via the iPad's taskbar and then do a soft-reset and see if you can install it after the iPad has restarted. To close the App Store : double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest
Ebay is not an official reseller. Return it if you can for a refund.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
My icloud activation lock is on my iphone, which requires an activation login to access the homescreen, but when i log in with the apple ID on the phone, it says the apple ID is not meant to unclock this iphone 5 ios 8.0.2. please help me solve this.
Yes the phone belongs to me. It was purchased from United Kingdom Vodafone to West Africa, i had to factory unlock to use any sim in it. so it belongs to me. I did the activation myself, now after updating my iphone to the latest update, it required a user id and password to activate the phone, but anytime i enter the details, it tells me the user Id is not correct but the password is correct..
-
Whenever I am sending a MSG from my iPhone 4s to friends who don't have I phone or I device my smiley(emoji) seen to be square to them and when they send MSG to me with a smiley my iPhone shows :-) ;-p like symbols. Please help I want to receive smiley from my friend
I think you answered your own question. As your friends phones are not iPhones, but maybe Nokia or Android the smiley will appear as a different character or box. Thew only way to fix this would be to send a basic smile using the basic keyboard so that your friends will receive it as a smile and you will when they reply. Or ask your friends to check if the phones they are using have the emoji type keyboard available and ask them to update their phones. This will show the smiley when they reply to you.
Hope this helps. -
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
Thanks,
Lina1116did you find a fix?
-
My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....
No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.
-
I have an iPhone 4 and plugged it into itunes on my computer for the first time. Only to discover my sister has obviously plugged hers into my itunes account and now I have lost all my photos and numbers. Please help me!!
It can't do that by itself. You had to click through several prompts telling it to restore it from a backup of an old phone for that to happen.
If the phone was not backed up to iCloud before this happened, or to another computer, then the data is gone. There is no way to recover it. -
My iPhone 4S is not preforming any network related operations after 5.0.1 update - please help!
My iPhone 4S is not preforming any network related (Calls, Messages) operations after 5.0.1 update - please help!
5.0.2 has not been released, thus you can not upgrade.
Stedman
Maybe you are looking for
-
Hi, I have got a query for which I am trying to get a solution for about two days now. I have got a web form with a lot of input types like text, textarea, radio, select. And all these are overlayered with a transparent div. To avoid user int
-
Hello My client, a bank, wants to activate Dual control for GL postings (so not only dual control for changing vendor or customer or bank or GL master data using sensitive fields in customizing). How can I realize this requirement? Regards Arjan Dual
-
10.6.2 Causing Browsers to Freeze on Pages w/Flash?
Every time I navigate to a page that has Flash elements into it (e.g. YouTube), Safari hangs and my computer beach balls. I can't view any pages with Flash elements in them (or at least pages that have multiple Flash elements) without Safari freezing
-
Execute Query through Variable
I want to execute query through variable in Oracle Developer sql_text varchar(1000); sql_text:='select some query'; How to execute this query text stored in sql_text variable? Regards,
-
After installing Mountain Lion, mac won't let me type password to log in.
I installed mountain lion about 6 days ago and whenever i startup my computer it is really slow. Then when i go to type in my password nothing will type and i cant use the trackpad either. To be able to log in, I have to sleep my imac and then retry