Iphone 5 cant be restored, it shows unknown error -1 while trying to restore and it only display connect to Itune
Iphone 5 cant be restored, it shows unknown error -1 while trying to restore and it only display connect to Itune
Greetings ayokunlefromlos angeles,
Welcome to the Apple Support Communities!
I understand that when attempting to restore your iPhone you receive an error and your iPhone shows the Connect to iTunes screen. To begin troubleshooting, I would suggest manually placing your iPhone in recovery mode and attempting the restore. Please follow the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Joe
Similar Messages
-
Unknown error (-53) while trying to restore backup discs
I'm trying to move my songs from my laptop to my home computer. My computer keeps shutting down when I use my ipod as a hard drive. So I chose to backup library to discs. Which worked fine, (11 dvds). However when I put them into my home computer, itunes gives me and unknown error (-53). The dvd shows up in my D drive as Backup2009-04-24. But itunes does not restore it. Any suggestions on how to get the songs over? Connect computers over a LAN? Anything!
brain318 wrote:
I'm trying to move my songs from my laptop to my home computer. My computer keeps shutting down when I use my ipod as a hard drive. So I chose to backup library to discs. Which worked fine, (11 dvds). However when I put them into my home computer, itunes gives me and unknown error (-53). The dvd shows up in my D drive as Backup2009-04-24. But itunes does not restore it. Any suggestions on how to get the songs over? Connect computers over a LAN? Anything!
Couple of suggestions...
1) With the DVD in the drive, what happens when you choose File > Add To Library...? Are you able to add the individual files this way?
2) Are you able to copy the individual files from the DVD-R backup to a new temporary folder on your desktop, and move these files into iTunes? What happens when you choose File > Add To Library... for this? -
Hi. A very much help needed.
- iTunes keep showing unknown error (48) while restoring my iphone 4s
- I've already re-install iTunes various times
- Already delete previously downloaded 8.3 ipsw and re-downloaded it countless times
- Changed and edited hosts in windows drivers as per shown on guides
but... to no avail!!!!
I am now without any phone to be used.
HELP ME PLEASEHello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
I phone 4 s restore is showing unknown error 3.
i phone 4 s restore is showing unknown error 3.
please help.You need to put the phone into recovery mode, then restore, as described in this article:
iOS: Unable to update or restore -
i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?
From the article which you posted your question from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
Ipod nano gets unknown error -48 when trying to restore
Hi All
My Ipod nano gets unknown error -48 when trying to restore and download the software update. Specifcally, when I connect my ipod, I get a message saying itunes cannot access the ipod and that I should restore it. I go the the ipod tab, hit the restore button and the download begins (approx 16mb). The download completes, and then I get this message :
There was a problem downloading the ipod software for the ipod "ipod". An unknown error occurred (-48).
Please help !!!!!Even though not specifically listed, try the steps here:
http://support.apple.com/kb/TS1372
If you know someone with an XP windows machine try the reset utility on their computer. -
Error occured while trying to restore this iphone (-50)
I was trying to update my iphone 3G software to 4.2.1 (I was running 3. something before then) and I got a message that said "an error occured while trying to restore this iphone (-50)," and my phone has been wiped clean. This happened after updating my itunes to the latest update. In itunes, I now have two options, Set up as a new iphone, or restore from "unkown." Not cool! Any suggestions?
This did not solve the issue for me. I am trying to update to 4.0.1
My hosts file says
# Copyright (c) 1993-2009 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
I also tried it with the second to last line completely removed, so it was
# 127.0.0.1 localhost
# ::1 localhost
Any other thoughts? -
i am getting error :1621 while trying to restore iphone 3gs it. any one know wat this is error about?
1621: Are you thinking of a different error? Or is the iTunes screen definitely saying 1621?
-
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
-
Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
"An unknown error occurred while trying to start the collection process."
I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.Hi,
This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
and Team Foundation Server.
You have problems when using Concurrency Visualizer Extension, please ask in
the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
says "an error occurred while trying to confirm account info, check network connection"
i am connected to network, iphoto is updated, what else can i try?The following solution was reported by ASC member Troy Murray. I can't confirm that it works or that all the steps are necessary. Back up all data before making any changes.
Step 1
From the iBooks menu bar, select
Store ▹ Deauthorize This Computer...
Enter your Apple ID credentials when prompted and click Deauthorize. Quit iBooks.
Step 2
Follow the instructions in this support article under the heading "Remove the SC Info folder."
Step 3
Launch iBooks. From the menu bar, select
Store ▹ Authorize This Computer...
and authenticate again. Click Authorize. Then select
Store ▹ Sign In -
Iphone won't turn on, and says 'unknown error 2009' when trying to restore?
this morning my iphone turned off and wouldn't turn on. I plugged it into the charger and it said to connect it to itunes. Once i finally did that, at first it couldnt detect it but now it keeps telling me an iphone has been detected in recovery mode and to sync it I need to restore it.
Here's the problem, everytime i try to restore it, it comes up with something along the lines of, it cannot restore becvause of 'unknown error 2009' and as soon as i unplug the phone it turns off. What can I do?I was doing some research on this problem for a friend and came across your post and thought I should share this:
https://discussions.apple.com/thread/5372052?start=30&tstart=0
Hopefully it helps, good luck. -
this evening has been torturous My phone said I needed to restore thru Itunes/support
I tried and keep getting UNKNOWN Error 3
I tried to get support but I can't open my phone to get the serial number.
Now WHAT????I was doing some research on this problem for a friend and came across your post and thought I should share this:
https://discussions.apple.com/thread/5372052?start=30&tstart=0
Hopefully it helps, good luck. -
TS3274 unknown error 3 while attempting iPad restore
Hello people, I am tired of attempting restore my iPad 32 GB retina (4G) version. Everything goes nice until the last stage of restoration process and when i expect finally to see welcome screen I get message saying unknown error happened while restoring iPad (3) (something like this but not exact same). I tried few times with different ipsw files downloaded (6.0, 7.0, 7.04) but all ended up at the same stage. I also tried with my macbook and pc as well. Can anybody help me with this issue please.
Thanks for Reply, but it is weired to get such an error after about 20 minute of restoration process...anyway I assume it could be the error with flash memory (bad sectors) or maybe something else but the log indicates multiple errors which i really cannot understand fully.
01/04/2014 14:40:57.719 iTunes[192]: tid:1f73 - amai: _AMAuthInstallBasebandCheckForParameterChange: bbParameters is now non-NULL
01/04/2014 14:40:58.134 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandCreateMeasurements: Using set ChipID 0x004600E1 to measure
01/04/2014 14:40:58.782 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandApplyTssOverrides: failed to create CFDictionary from Options.plist
01/04/2014 14:40:58.783 iTunes[192]: tid:1f73 - amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
01/04/2014 14:40:59.325 iTunes[192]: tid:1f73 - amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
01/04/2014 14:40:59.329 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandStitchFirmwareFromBbfw: stitch function returned NULL for "osbl.mbn"; continuing anyway
01/04/2014 14:40:59.332 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandStitchFirmwareFromBbfw: stitch function returned NULL for "amss.mbn"; continuing anyway
01/04/2014 14:40:59.336 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandStitchFirmwareFromBbfw: stitch function returned NULL for "dsp1.mbn"; continuing anyway
01/04/2014 14:40:59.394 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandStitchFirmwareFromBbfw: stitch function returned NULL for "dsp2.mbn"; continuing anyway
01/04/2014 14:40:59.398 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandStitchFirmwareFromBbfw: stitch function returned NULL for "partition.mbn"; continuing anyway
01/04/2014 14:41:07.710 iTunes[192]: tid:1f73 - amai: _AMAuthInstallBasebandCheckForParameterChange: nonce changed
01/04/2014 14:41:07.710 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandSetParametersWithUpdaterOutput: bbParameters changed, triggering bbfw re-personalization
01/04/2014 14:41:08.120 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandCreateMeasurements: Using set ChipID 0x004600E1 to measure
01/04/2014 14:41:08.271 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandApplyTssOverrides: failed to create CFDictionary from Options.plist
01/04/2014 14:41:08.271 iTunes[192]: tid:1f73 - amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
01/04/2014 14:41:08.760 iTunes[192]: tid:1f73 - amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
01/04/2014 14:42:47.664 PluginProcess[1134]: CoreText performance note: Client called CTFontCreateWithName() using name "Arial Unicode MS" and got font with PostScript name "ArialUnicodeMS". For best performance, only use PostScript names when calling this API.
01/04/2014 14:42:47.664 PluginProcess[1134]: CoreText performance note: Set a breakpoint on CTFontLogSuboptimalRequest to debug.
01/04/2014 14:42:48.885 PluginProcess[1134]: CoreText performance note: Client called CTFontCreateWithName() using name "Times Roman" and got font with PostScript name "Times-Roman". For best performance, only use PostScript names when calling this API.
01/04/2014 14:46:26.590 iTunes[192]: tid:1f73 - amai: _AMAuthInstallBasebandCheckForParameterChange: nonce changed
01/04/2014 14:46:26.590 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandSetParametersWithUpdaterOutput: bbParameters changed, triggering bbfw re-personalization
01/04/2014 14:46:27.008 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandCreateMeasurements: Using set ChipID 0x004600E1 to measure
01/04/2014 14:46:27.187 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandApplyTssOverrides: failed to create CFDictionary from Options.plist
01/04/2014 14:46:27.187 iTunes[192]: tid:1f73 - amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
01/04/2014 14:46:27.929 iTunes[192]: tid:1f73 - amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
01/04/2014 14:46:27.942 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandStitchFirmwareFromBbfw: stitch function returned NULL for "osbl.mbn"; continuing anyway
01/04/2014 14:46:27.945 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandStitchFirmwareFromBbfw: stitch function returned NULL for "amss.mbn"; continuing anyway
01/04/2014 14:46:27.950 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandStitchFirmwareFromBbfw: stitch function returned NULL for "dsp1.mbn"; continuing anyway
01/04/2014 14:46:28.005 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandStitchFirmwareFromBbfw: stitch function returned NULL for "dsp2.mbn"; continuing anyway
01/04/2014 14:46:28.009 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandStitchFirmwareFromBbfw: stitch function returned NULL for "partition.mbn"; continuing anyway
01/04/2014 14:46:36.311 iTunes[192]: tid:1f73 - amai: _AMAuthInstallBasebandCheckForParameterChange: nonce changed
01/04/2014 14:46:36.311 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandSetParametersWithUpdaterOutput: bbParameters changed, triggering bbfw re-personalization
01/04/2014 14:46:36.763 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandCreateMeasurements: Using set ChipID 0x004600E1 to measure
01/04/2014 14:46:36.916 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandApplyTssOverrides: failed to create CFDictionary from Options.plist
01/04/2014 14:46:36.917 iTunes[192]: tid:1f73 - amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
01/04/2014 14:46:37.572 iTunes[192]: tid:1f73 - amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
01/04/2014 14:46:39.880 com.apple.launchd[1]: (com.apple.qtkitserver[356]) Could not terminate job: 3: No such process
01/04/2014 14:46:39.880 com.apple.launchd[1]: (com.apple.qtkitserver[356]) Using fallback option to terminate job...
01/04/2014 14:53:47.020 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandCreateMeasurements: Using set ChipID 0x004600E1 to measure
01/04/2014 14:53:57.415 iTunes[192]: tid:1f73 - amai: _AMAuthInstallBasebandCheckForParameterChange: nonce changed
01/04/2014 14:53:57.415 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandSetParametersWithUpdaterOutput: bbParameters changed, triggering bbfw re-personalization
01/04/2014 14:53:57.821 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandCreateMeasurements: Using set ChipID 0x004600E1 to measure
01/04/2014 14:53:57.987 iTunes[192]: tid:1f73 - amai: AMAuthInstallBasebandApplyTssOverrides: failed to create CFDictionary from Options.plist
01/04/2014 14:53:57.987 iTunes[192]: tid:1f73 - amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
01/04/2014 14:53:58.621 iTunes[192]: tid:1f73 - amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
01/04/2014 15:02:24.867 Console[1462]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
01/04/2014 15:02:26.871 WindowServer[111]: disable_update_timeout: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
01/04/2014 15:02:27.586 WindowServer[111]: common_reenable_update: UI updates were finally reenabled by application "Console" after 1.72 seconds (server forcibly re-enabled them after 1.00 seconds)
01/04/2014 15:04:06.734 iTunes[192]: tid:1f73 - dumping CFError returned by restored:
01/04/2014 15:04:06.734 iTunes[192]: tid:1f73 - CFError domain:AMRestoreErrorDomain code:-1 description:failed to update device firmware
01/04/2014 15:04:06.734 iTunes[192]: tid:1f73 - CFError domain:AMRestoreErrorDomain code:-1 description:ramrod firmware update failed
01/04/2014 15:04:06.734 iTunes[192]: tid:1f73 - CFError domain:RamrodErrorDomain code:1004 description:update_baseband: failed to perform next stage
01/04/2014 15:04:06.735 iTunes[192]: tid:1f73 - CFError domain:BBUpdater code:3 description:Failed creating a communication transport to baseband.
01/04/2014 15:04:06.783 iTunes[192]: tid:1f73 -
==== device restore output ====
clock down RGBOUT
AppleD1974PMUPowerSource: AppleUSBCableDetect 1
AppleD1974PMUPowerSource: AppleUSBCableType USBHost
AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
AppleMultitouchZ2SPI: detected HBPP. driver will be kept alive
display-scale = 2
display-rotation = 90
found applelogo at /usr/share/progressui/applelogo@2x~ipad.tga
found display: primary
display: 2048 x 1536
found PTP interface
AppleSynopsysOTGDevice - Configuration: PTP
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice - Configuration: iPod USB Interface
AppleSynopsysOTGDevice Interface: USBAudioControl
AppleSynopsysOTGDevice Interface: USBAudioStreaming
AppleSynopsysOTGDevice Interface: IapOverUsbHid
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice Interface: AppleUSBEthernet
AppleBCMWLANCore::init(): IO80211-46 Feb 28 2014 17:24:28
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
IOAccessoryPortUSB::start
AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
virtual bool AppleUSBDeviceMux::start(IOService *) build: Feb 28 2014 17:26:28
init_waste
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
AppleSynopsysOTGDevice::startUSBStack Starting usb stack
000917.427286 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
000917.427636 wlan.N[1] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0x802d9000 (this 1, provider 0)
000917.427667 wlan.N[2] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
IO80211PeerManager::initWithInterface cant add monitoring timer
Started logging for intf
IO80211PeerManager::initWithInterface: inited peer manager
IO80211Interface::init peerManager=0x9e82b400
start:156
start:156
IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
AppleUSBDeviceMux::handleConnectResult new session 0xa217ff20 established 62078<-lo0->49152 62078<-usb->512
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217ff20
recv(13, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217ff20 established 62078<-lo0->49153 62078<-usb->768
AppleUSBDeviceMux::handleConnectResult new session 0xa217fec8 established 62078<-lo0->49154 62078<-usb->1024
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217ff20
recv(13, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217ff20 established 62078<-lo0->49155 62078<-usb->1280
AppleUSBDeviceMux::handleConnectResult new session 0xa217fe70 established 62078<-lo0->49156 62078<-usb->1536
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217ff20
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fec8
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fe70
recv(13, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(14, 4) failed: connection closed
unable to read message size: -1
could not receive message
recv(15, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217fe70 established 62078<-lo0->49157 62078<-usb->1792
AppleUSBDeviceMux::handleConnectResult new session 0xa217fec8 established 62078<-lo0->49158 62078<-usb->2048
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fec8
recv(14, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217fec8 established 62078<-lo0->49159 62078<-usb->2304
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fec8
recv(14, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217fec8 established 62078<-lo0->49160 62078<-usb->2560
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fec8
recv(14, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217fec8 established 62078<-lo0->49161 62078<-usb->2816
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fec8
recv(14, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217fec8 established 62078<-lo0->49162 62078<-usb->3072
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fec8
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217fec8 established 62078<-lo0->49163 62078<-usb->3328
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fec8
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217fec8 established 62078<-lo0->49164 62078<-usb->3584
unrecognized key 'BootArgs' in value query
failed to handle value query for key 'BootArgs', sending back empty response
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fec8
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217fec8 established 62078<-lo0->49165 62078<-usb->3840
unrecognized key 'MarketingPartNumber' in value query
failed to handle value query for key 'MarketingPartNumber', sending back empty response
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fec8
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
AppleUSBDeviceMux::handleConnectResult new session 0xa217fec8 established 62078<-lo0->49166 62078<-usb->4096
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa217fec8
recv(9, 4) failed: connection closed
unable to read message size: -1
could not receive message
client protocol version 13
*** UUID 9A339BC0-CBBC-4CC5-BD22-A7C3801632FB ***
Restore options:
UUID => <CFString 0x17e28110 [0x3e4ae0]>{contents = "9A339BC0-CBBC-4CC5-BD22-A7C3801632FB"}
MinimumSystemPartition => <CFNumber 0x17e28060 [0x3e4ae0]>{value = +1771, type = kCFNumberSInt64Type}
SystemPartitionSize => <CFNumber 0x17e27ca0 [0x3e4ae0]>{value = +1771, type = kCFNumberSInt64Type}
SystemPartitionPadding => <CFBasicHash 0x17e29cd0 [0x3e4ae0]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x17e28170 [0x3e4ae0]>{contents = "128"} = <CFNumber 0x17e28090 [0x3e4ae0]>{value = +1280, type = kCFNumberSInt64Type}
3 : <CFString 0x17e280c0 [0x3e4ae0]>{contents = "16"} = <CFNumber 0x17e27a10 [0x3e4ae0]>{value = +160, type = kCFNumberSInt64Type}
4 : <CFString 0x17e27a20 [0x3e4ae0]>{contents = "32"} = <CFNumber 0x17e27ed0 [0x3e4ae0]>{value = +320, type = kCFNumberSInt64Type}
5 : <CFString 0x17e29b50 [0x3e4ae0]>{contents = "8"} = <CFNumber 0x17e27db0 [0x3e4ae0]>{value = +80, type = kCFNumberSInt64Type}
8 : <CFString 0x17e29d00 [0x3e4ae0]>{contents = "64"} = <CFNumber 0x17e29b40 [0x3e4ae0]>{value = +640, type = kCFNumberSInt64Type}
entering load_sep_os
device has no sep
entering partition_nand_device
device supports boot-from-NAND
[NAND] WMR_Open:420 FTL_Open [OK]
[NAND] _publishServices:642 FTL capabilities: 0x00000001
[NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 73 max_count: 73
[NAND] _fetchBorrowedList:881 number of borrowed blocks 64
[nand_part_core:INF@ 157] published partition 0
[nand_part_core:INF@ 157] published partition 1
[nand_part_core:INF@ 157] published partition 2
[nand_part_core:INF@ 157] published partition 3
[nand_part_core:INF@ 157] published partition 5
[nand_part_core:INF@ 157] published partition 6
[effaceable:INIT] found current generation, 201, in group 0
[effaceable:INIT] started
[effaceable:INIT] started
AppleARMBacklight::start: No AAP function
nand device is already partitioned
entering wait_for_storage_device
Searching for NAND service
Found NAND service: IOFlashStoragePartition
NAND initialized. Waiting for devnode.
entering clear_remap_variable
executing /usr/sbin/nvram
entering format_effaceable_storage
effaceable storage is formatted, clearing it
effaceable storaged cleared
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
executing /sbin/fsck_hfs
** /dev/rdisk0s1s1
Executing fsck_hfs (version hfs-277.10.5).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
The volume name is Sochi11D167.J2aOS
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume Sochi11D167.J2aOS appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s1 mounted on /mnt1
entering check_for_restore_log
found restore log (size = 81500)
entering unmount_filesystems
error unmounting '/mnt2': Invalid argument
entering clean_NAND
NAND format complete
entering ramrod_probe_media
find_filesystem_partitions: storage=/dev/disk0 system= data=
entering format_storage_for_LwVM
entering ramrod_probe_media
device partitioning scheme is GPT
unexpected partition 'LwVM' - skipping
find_filesystem_partitions: storage=/dev/disk0s1 system= data=
entering create_filesystem_partitions
User specified system partition size, skipping firmware extras size.
system partition padding size is: 335544320 bytes
unable to open : No such file or directory
creating 2 partitions
creating encrypted data partition
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
wipe entire partition: 1 (old = 0 new = 2091)
block size for /dev/disk0s1s1: 4096
/sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
block size for /dev/disk0s1s2: 4096
/sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
Initialized /dev/rdisk0s1s2 as a 27 GB case-sensitive HFS Plus volume with a 8192k journal
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
entering mount_filesystems
executing /sbin/fsck_hfs
** /dev/rdisk0s1s1
Executing fsck_hfs (version hfs-277.10.5).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
The volume name is System
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume System appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s1 mounted on /mnt1
executing /sbin/fsck_hfs
** /dev/rdisk0s1s2
Executing fsck_hfs (version hfs-277.10.5).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
The volume name is Data
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume Data appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s2 mounted on /mnt2
entering resize_system_partition_to_options
User specified system partition size, skipping firmware extras size.
Found SystemPartitionPadding value of 335544320 bytes
Erasing system partition prior to resize operation.
block size for /dev/disk0s1s1: 4096
/sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
executing /sbin/fsck_hfs
** /dev/rdisk0s1s1
Executing fsck_hfs (version hfs-277.10.5).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
The volume name is System
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume System appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s1 mounted on /mnt1
Trying to resize system partition to 2192572416 bytes aka 2091 MB
entering adjust_partition_preflight
partition:0 requiredSize=535296
no change in size
Successfully resized the system partition
entering maximize_data_partition
entering adjust_partition_preflight
partition:1 requiredSize=<<<<<IMEI>>>>>>6
maximizing data partition to 29516365823 bytes
entering adjust_partition_preflight
partition:1 requiredSize=7206144
no change in size
Successfully resized data partition to consume free blocks
The system partition now has a total HFS+ capacity of 2091 MB
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
entering unmount_filesystems
entering ramrod_ticket_update
looking up root ticket hash
device tree ticket-hash: <CFData 0x17d2cf20 [0x3e4ae0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
received valid ticket (2741 bytes)
entering restore_images
Successfully marked device node /dev/rdisk0s1s1 as static data
executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
ASR: asr: Unable to disable idle sleep - -536870199
ASR STATUS: start 241.1 multicast-client
ASR: Waiting for connection attempt from server
AppleUSBDeviceMux::handleConnectResult new session 0xa217f5d8 established 12345<-lo0->49169 12345<-usb->4864
ASR STATUS: setup
ASR: Validating target...
ASR: done
ASR STATUS: metadata
ASR: Validating source...
ASR: done
ASR: Retrieving scan information...
ASR: done
ASR: Validating sizes...
ASR: done
ASR STATUS: restore
ASR RESTORE PROGRESS: 2%
ASR RESTORE PROGRESS: 4%
ASR RESTORE PROGRESS: 6%
ASR RESTORE PROGRESS: 8%
ASR RESTORE PROGRESS: 10%
ASR RESTORE PROGRESS: 12%
ASR RESTORE PROGRESS: 14%
ASR RESTORE PROGRESS: 16%
ASR RESTORE PROGRESS: 18%
ASR RESTORE PROGRESS: 20%
ASR RESTORE PROGRESS: 22%
ASR RESTORE PROGRESS: 24%
ASR RESTORE PROGRESS: 26%
ASR RESTORE PROGRESS: 28%
ASR RESTORE PROGRESS: 30%
ASR RESTORE PROGRESS: 32%
ASR RESTORE PROGRESS: 34%
ASR RESTORE PROGRESS: 36%
ASR RESTORE PROGRESS: 38%
ASR RESTORE PROGRESS: 40%
ASR RESTORE PROGRESS: 42%
ASR RESTORE PROGRESS: 44%
ASR RESTORE PROGRESS: 46%
ASR RESTORE PROGRESS: 48%
ASR RESTORE PROGRESS: 50%
ASR RESTORE PROGRESS: 52%
ASR RESTORE PROGRESS: 54%
ASR RESTORE PROGRESS: 56%
ASR RESTORE PROGRESS: 58%
ASR RESTORE PROGRESS: 60%
ASR RESTORE PROGRESS: 62%
ASR RESTORE PROGRESS: 64%
ASR RESTORE PROGRESS: 66%
ASR RESTORE PROGRESS: 68%
ASR RESTORE PROGRESS: 70%
ASR RESTORE PROGRESS: 72%
ASR RESTORE PROGRESS: 74%
ASR RESTORE PROGRESS: 76%
ASR RESTORE PROGRESS: 78%
ASR RESTORE PROGRESS: 80%
ASR RESTORE PROGRESS: 82%
ASR RESTORE PROGRESS: 84%
ASR RESTORE PROGRESS: 86%
ASR RESTORE PROGRESS: 88%
ASR RESTORE PROGRESS: 90%
ASR RESTORE PROGRESS: 92%
ASR RESTORE PROGRESS: 94%
ASR RESTORE PROGRESS: 96%
ASR RESTORE PROGRESS: 98%
AppleUSBDeviceMux::sessionUpcall socket is closed, session 0xa217f5d8 (12345<-lo0->49169 12345<-usb->4864)
ASR RESTORE PROGRESS: 100%
ASR: Copied 1857602048 bytes in 94.84 seconds, 19128.00 KiB/s
ASR STATUS: verify
ASR VERIFY PROGRESS: 2%
ASR VERIFY PROGRESS: 4%
ASR VERIFY PROGRESS: 6%
ASR VERIFY PROGRESS: 8%
ASR VERIFY PROGRESS: 10%
ASR VERIFY PROGRESS: 12%
ASR VERIFY PROGRESS: 14%
ASR VERIFY PROGRESS: 16%
ASR VERIFY PROGRESS: 18%
ASR VERIFY PROGRESS: 20%
ASR VERIFY PROGRESS: 22%
ASR VERIFY PROGRESS: 24%
ASR VERIFY PROGRESS: 26%
ASR VERIFY PROGRESS: 28%
ASR VERIFY PROGRESS: 30%
ASR VERIFY PROGRESS: 32%
ASR VERIFY PROGRESS: 34%
ASR VERIFY PROGRESS: 36%
ASR VERIFY PROGRESS: 38%
ASR VERIFY PROGRESS: 40%
ASR VERIFY PROGRESS: 42%
ASR VERIFY PROGRESS: 44%
ASR VERIFY PROGRESS: 46%
ASR VERIFY PROGRESS: 48%
ASR VERIFY PROGRESS: 50%
ASR VERIFY PROGRESS: 52%
ASR VERIFY PROGRESS: 54%
ASR VERIFY PROGRESS: 56%
ASR VERIFY PROGRESS: 58%
ASR VERIFY PROGRESS: 60%
ASR VERIFY PROGRESS: 62%
ASR VERIFY PROGRESS: 64%
ASR VERIFY PROGRESS: 66%
ASR VERIFY PROGRESS: 68%
ASR VERIFY PROGRESS: 70%
ASR VERIFY PROGRESS: 72%
ASR VERIFY PROGRESS: 74%
ASR VERIFY PROGRESS: 76%
ASR VERIFY PROGRESS: 78%
ASR VERIFY PROGRESS: 80%
ASR VERIFY PROGRESS: 82%
ASR VERIFY PROGRESS: 84%
ASR VERIFY PROGRESS: 86%
ASR VERIFY PROGRESS: 88%
ASR VERIFY PROGRESS: 90%
ASR VERIFY PROGRESS: 92%
ASR VERIFY PROGRESS: 94%
ASR VERIFY PROGRESS: 96%
ASR VERIFY PROGRESS: 98%
ASR VERIFY PROGRESS: 100%
ASR: Verified SHA-1 checksum 1857602048 bytes in 22.54 seconds, 80487.06 KiB/s
ASR STATUS: finish
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
entering mount_filesystems
executing /sbin/fsck_hfs
** /dev/rdisk0s1s1
Executing fsck_hfs (version hfs-277.10.5).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
The volume name is Sochi11D167.J2aOS
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume Sochi11D167.J2aOS appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s1 mounted on /mnt1
executing /sbin/fsck_hfs
** /dev/rdisk0s1s2
Executing fsck_hfs (version hfs-277.10.5).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
The volume name is Data
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume Data appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s2 mounted on /mnt2
entering install_kernel_cache
writing kernelcache to /mnt1/System/Library/Caches/com.apple.kernelcaches/kernelcache
entering install_secure_vault_daemon
entering get_hardware_platform
platform-name = s5l8945x
linking /mnt1/usr/sbin/securekeyvaultd to /mnt1/usr/sbin/securekeyvaultd.s5l8945x
no securekeyvaultd for s5l8945x
entering ramrod_ticket_write
writing ticket to /mnt1/System/Library/Caches/apticket.der
entering update_device_firmware
create_baseband_update_options: Got imeisv: 9
baseband updater options = <CFBasicHash 0x17d2df80 [0x3e4ae0]>{type = mutable dict, count = 3,
entries =>
0 : <CFString 0x1de298 [0x3e4ae0]>{contents = "IMEISwVersion"} = <CFNumber 0x17e2cab0 [0x3e4ae0]>{value = +9, type = kCFNumberSInt32Type}
1 : <CFString 0x1de2f8 [0x3e4ae0]>{contents = "autoSetupEnv"} = <CFBoolean 0x3e4e98 [0x3e4ae0]>{value = false}
2 : <CFString 0x1de308 [0x3e4ae0]>{contents = "disablePing"} = <CFBoolean 0x3e4e90 [0x3e4ae0]>{value = true}
_baseband_update_requires_system_filesystem_once: querying baseband to determine if it requires system filesystem
_baseband_update_requires_system_filesystem_once: query returned <CFBasicHash 0x17d2dfd0 [0x3e4ae0]>{type = mutable dict, count = 3,
entries =>
0 : <CFString 0x1de068 [0x3e4ae0]>{contents = "requireSystemPartitionMount"} = <CFBoolean 0x3e4e98 [0x3e4ae0]>{value = false}
1 : <CFString 0x1de088 [0x3e4ae0]>{contents = "requireUserPartitionMount"} = <CFBoolean 0x3e4e98 [0x3e4ae0]>{value = false}
2 : <CFString 0x1de098 [0x3e4ae0]>{contents = "requireBasebandFSPartitionMount"} = <CFBoolean 0x3e4e98 [0x3e4ae0]>{value = false}
entering update_iBoot
found 'AppleImage3NORAccess' object in IORegistry
entering update_iBoot_image3_NOR_access
write_image3_data: flashing illb data (length = 0x24a1a)
write_image3_data: flashing SCAB data (length = 0xb00)
ticket updated
write_image3_data: flashing ibot data (length = 0x4718c)
write_image3_data: flashing bat1 data (length = 0x148c)
write_image3_data: flashing dtre data (length = 0x14b0c)
write_image3_data: flashing glyP data (length = 0x3a8c)
write_image3_data: flashing bat0 data (length = 0x1d40c)
write_image3_data: flashing chg0 data (length = 0x260c)
write_image3_data: flashing batF data (length = 0x1a4cc)
write_image3_data: flashing chg1 data (length = 0x88cc)
write_image3_data: flashing logo data (length = 0x45cc)
write_image3_data: flashing recm data (length = 0x1e64c)
entering update_gas_gauge
entering update_ir_mcu
looking for mcu nub...no entry from path!
TiSerialFlasher not supported on this platform. Exiting.
entering update_baseband
update_baseband: registering for progress notifications
create_baseband_update_options: Got imeisv: 9
baseband updater options = <CFBasicHash 0x17d2e0a0 [0x3e4ae0]>{type = mutable dict, count = 6,
entries =>
0 : <CFString 0x1de248 [0x3e4ae0]>{contents = "SystemRoot"} = <CFString 0x17d2bea0 [0x3e4ae0]>{contents = "/mnt1"}
1 : <CFString 0x1de298 [0x3e4ae0]>{contents = "IMEISwVersion"} = <CFNumber 0x17e2cab0 [0x3e4ae0]>{value = +9, type = kCFNumberSInt32Type}
2 : <CFString 0x1de2f8 [0x3e4ae0]>{contents = "autoSetupEnv"} = <CFBoolean 0x3e4e98 [0x3e4ae0]>{value = false}
3 : <CFString 0x1de1d8 [0x3e4ae0]>{contents = "forceUpdate"} = <CFBoolean 0x3e4e90 [0x3e4ae0]>{value = true}
5 : <CFString 0x1de308 [0x3e4ae0]>{contents = "disablePing"} = <CFBoolean 0x3e4e90 [0x3e4ae0]>{value = true}
6 : <CFString 0x1de1f8 [0x3e4ae0]>{contents = "DisallowFusiing"} = <CFBoolean 0x3e4e90 [0x3e4ae0]>{value = true}
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage initial
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
AppleImage3NORAccess::_getSuperBlock imageVersion: 3
AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
bbupdater: Creating transport, attempts remaining 1...bbupdater: FAILED(kBBUReturnIOError)
bbupdater: Creating transport, attempts remaining 0...bbupdater: FAILED(kBBUReturnIOError)
bbupdater: Modem not responding
bbupdater: Forcing into first stage
bbupdater: Creating transport, attempts remaining 1...bbupdater: OK
bbupdater: Baseband VendorID [0x5C6] ProductID [0x9008]
bbupdater: END: Preparing Initial stage
bbupdater: END: Querying info at stage initial
bbupdater: BEGIN: Querying info at stage first
bbupdater: BEGIN: Preparing first stage
bbupdater: END: Preparing first stage
bbupdater: Connecting to Loader...bbupdater: OK
bbupdater: Getting Version...bbupdater: OK
bbupdater: Loader version: PBL-DownloaderVER1.0
bbupdater: Fusing disallowed, will treat as fused
bbupdater: END: Querying info at stage first
update_baseband: query returned <CFBasicHash 0x17e2b490 [0x3e4ae0]>{type = mutable dict, count = 5,
entries =>
2 : <CFString 0x1de4a8 [0x3e4ae0]>{contents = "VendorID"} = <CFNumber 0x17e24730 [0x3e4ae0]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x1dcba8 [0x3e4ae0]>{contents = "ChipID"} = <CFNumber 0x17e2b510 [0x3e4ae0]>{value = +4587745, type = kCFNumberSInt32Type}
4 : <CFString 0x1de4f8 [0x3e4ae0]>{contents = "FusingStatus"} = <CFNumber 0x17e24730 [0x3e4ae0]>{value = +3, type = kCFNumberSInt32Type}
5 : <CFString 0x1de498 [0x3e4ae0]>{contents = "CertID"} = <CFNumber 0x17d2bcc0 [0x3e4ae0]>{value = +4, type = kCFNumberSInt32Type}
6 : <CFString 0x1de348 [0x3e4ae0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
update_baseband: requesting baseband firmware data
update_baseband: received data from host (120516 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at first
bbupdater: Loading...
bbupdater: 0x4001a100 of 0x4003d55c (18 percent)
bbupdater: 0x40022200 of 0x4003d55c (37 percent)
bbupdater: 0x4002a300 of 0x4003d55c (55 percent)
bbupdater: 0x40032400 of 0x4003d55c (74 percent)
bbupdater: 0x4003a500 of 0x4003d55c (93 percent)
bbupdater: 0x4003d55c of 0x4003d55c (100 percent)
bbupdater:
bbupdater: Launching...bbupdater: OK
bbupdater: END: Perform stage at first
send_bbupdate_status: sending baseband update status to host
update_baseband: querying baseband info
bbupdater: BEGIN: Querying info at stage second
bbupdater: BEGIN: Preparing Second stage
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: Baseband VendorID [0x5C6] ProductID [0x9008]
bbupdater: END: Preparing Second stage
bbupdater: Saying Hello...bbupdater: OK
bbupdater: Using window size 2, max block size 4096
bbupdater: Unframed writes are supported
bbupdater: Reading Personlization Parameters...bbupdater: OK
bbupdater: END: Querying info at stage second
update_baseband: query returned <CFBasicHash 0x17e2b490 [0x3e4ae0]>{type = mutable dict, count = 6,
entries =>
0 : <CFString 0x1de388 [0x3e4ae0]>{contents = "Nonce"} = <CFData 0x17e2e500 [0x3e4ae0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
2 : <CFString 0x1de4a8 [0x3e4ae0]>{contents = "VendorID"} = <CFNumber 0x17e24730 [0x3e4ae0]>{value = +3, type = kCFNumberSInt32Type}
3 : <CFString 0x1dcba8 [0x3e4ae0]>{contents = "ChipID"} = <CFNumber 0x17e2b710 [0x3e4ae0]>{value = +4587745, type = kCFNumberSInt32Type}
4 : <CFString 0x1de4f8 [0x3e4ae0]>{contents = "FusingStatus"} = <CFNumber 0x17e24730 [0x3e4ae0]>{value = +3, type = kCFNumberSInt32Type}
5 : <CFString 0x1de498 [0x3e4ae0]>{contents = "CertID"} = <CFNumber 0x17d2bcc0 [0x3e4ae0]>{value = +4, type = kCFNumberSInt32Type}
6 : <CFString 0x1de348 [0x3e4ae0]>{contents = "ChipSerialNo" XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
update_baseband: requesting baseband firmware data
001209.947204 AppleUSBOHCIPort@3100000::resetAndCreateDevice: failed to address device (0xe0004051), disabling port
update_baseband: received data from host (15757603 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: Setting Security Mode...bbupdater: OK
bbupdater: Sending new Root Manifest...bbupdater: OK
bbupdater: Different, going to Program: Partition, DBL, OSBL, AMSS, DSP1, DSP2
bbupdater: Invalidating Old Root Manifest...bbupdater: OK
bbupdater: Sending Partition Table...bbupdater: OK
bbupdater: BEGIN: Sending 5 Images
bbupdater: Sending Image 'DBL'...
bbupdater: 0x8000 of 0xdf90 (57 percent)
bbupdater: 0xdf90 of 0xdf90 (100 percent)
bbupdater:
bbupdater: Waiting...bbupdater: OK
bbupdater: Sending Image 'OSBL'...
bbupdater: 0x8000 of 0x6306c (8 percent)
bbupdater: 0x10000 of 0x6306c (16 percent)
bbupdater: 0x18000 of 0x6306c (24 percent)
bbupdater: 0x20000 of 0x6306c (32 percent)
bbupdater: 0x28000 of 0x6306c (40 percent)
bbupdater: 0x30000 of 0x6306c (48 percent)
bbupdater: 0x38000 of 0x6306c (56 percent)
bbupdater: 0x40000 of 0x6306c (64 percent)
bbupdater: 0x48000 of 0x6306c (72 percent)
bbupdater: 0x50000 of 0x6306c (80 percent)
bbupdater: 0x58000 of 0x6306c (88 percent)
bbupdater: 0x60000 of 0x6306c (96 percent)
bbupdater: 0x6306c of 0x6306c (100 percent)
bbupdater:
bbupdater: Waiting...bbupdater: OK
bbupdater: Sending Image 'AMSS'...
bbupdater: 0x8000 of 0x1b1000 (1 percent)
bbupdater: 0x10000 of 0x1b1000 (3 percent)
bbupdater: 0x18000 of 0x1b1000 (5 percent)
bbupdater: 0x20000 of 0x1b1000 (7 percent)
bbupdater: 0x28000 of 0x1b1000 (9 percent)
bbupdater: 0x30000 of 0x1b1000 (11 percent)
bbupdater: 0x38000 of 0x1b1000 (12 percent)
bbupdater: 0x40000 of 0x1b1000 (14 percent)
bbupdater: 0x48000 of 0x1b1000 (16 percent)
bbupdater: 0x50000 of 0x1b1000 (18 percent)
bbupdater: 0x58000 of 0x1b1000 (20 percent)
bbupdater: 0x60000 of 0x1b1000 (22 percent)
bbupdater: 0x68000 of 0x1b1000 (24 percent)
bbupdater: 0x70000 of 0x1b1000 (25 percent)
bbupdater: 0x78000 of 0x1b1000 (27 percent)
bbupdater: 0x80000 of 0x1b1000 (29 percent)
bbupdater: 0x88000 of 0x1b1000 (31 percent)
bbupdater: 0x90000 of 0x1b1000 (33 percent)
bbupdater: 0x98000 of 0x1b1000 (35 percent)
bbupdater: 0xa0000 of 0x1b1000 (36 percent)
bbupdater: 0xa8000 of 0x1b1000 (38 percent)
bbupdater: 0xb0000 of 0x1b1000 (40 percent)
bbupdater: 0xb8000 of 0x1b1000 (42 percent)
bbupdater: 0xc0000 of 0x1b1000 (44 percent)
bbupdater: 0xc8000 of 0x1b1000 (46 percent)
bbupdater: 0xd0000 of 0x1b1000 (48 percent)
bbupdater: 0xd8000 of 0x1b1000 (49 percent)
bbupdater: 0xe0000 of 0x1b1000 (51 percent)
bbupdater: 0xe8000 of 0x1b1000 (53 percent)
bbupdater: 0xf0000 of 0x1b1000 (55 percent)
bbupdater: 0xf8000 of 0x1b1000 (57 percent)
bbupdater: 0x100000 of 0x1b1000 (59 percent)
bbupdater: 0x108000 of 0x1b1000 (60 percent)
bbupdater: 0x110000 of 0x1b1000 (62 percent)
bbupdater: 0x118000 of 0x1b1000 (64 percent)
bbupdater: 0x120000 of 0x1b1000 (66 percent)
bbupdater: 0x128000 of 0x1b1000 (68 percent)
bbupdater: 0x130000 of 0x1b1000 (70 percent)
bbupdater: 0x138000 of 0x1b1000 (72 percent)
bbupdater: 0x140000 of 0x1b1000 (73 percent)
bbupdater: 0x148000 of 0x1b1000 (75 percent)
bbupdater: 0x150000 of 0x1b1000 (77 percent)
bbupdater: 0x158000 of 0x1b1000 (79 percent)
bbupdater: 0x160000 of 0x1b1000 (81 percent)
bbupdater: 0x168000 of 0x1b1000 (83 percent)
bbupdater: 0x170000 of 0x1b1000 (84 percent)
bbupdater: 0x178000 of 0x1b1000 (86 percent)
bbupdater: 0x180000 of 0x1b1000 (88 percent)
bbupdater: 0x188000 of 0x1b1000 (90 percent)
bbupdater: 0x190000 of 0x1b1000 (92 percent)
bbupdater: 0x198000 of 0x1b1000 (94 percent)
bbupdater: 0x1a0000 of 0x1b1000 (96 percent)
bbupdater: 0x1a8000 of 0x1b1000 (97 percent)
bbupdater: 0x1b1000 of 0x1b1000 (100 percent)
bbupdater:
bbupdater: Waiting...bbupdater: OK
bbupdater: Sending Image 'DSP1'...
bbupdater: 0x8000 of 0x224f90 (1 percent)
bbupdater: 0x10000 of 0x224f90 (2 percent)
bbupdater: 0x18000 of 0x224f90 (4 percent)
bbupdater: 0x20000 of 0x224f90 (5 percent)
bbupdater: 0x28000 of 0x224f90 (7 percent)
bbupdater: 0x30000 of 0x224f90 (8 percent)
bbupdater: 0x38000 of 0x224f90 (10 percent)
bbupdater: 0x40000 of 0x224f90 (11 percent)
bbupdater: 0x48000 of 0x224f90 (13 percent)
bbupdater: 0x50000 of 0x224f90 (14 percent)
bbupdater: 0x58000 of 0x224f90 (16 percent)
bbupdater: 0x60000 of 0x224f90 (17 percent)
bbupdater: 0x68000 of 0x224f90 (18 percent)
bbupdater: 0x70000 of 0x224f90 (20 percent)
bbupdater: 0x78000 of 0x224f90 (21 percent)
bbupdater: 0x80000 of 0x224f90 (23 percent)
bbupdater: 0x88000 of 0x224f90 (24 percent)
bbupdater: 0x90000 of 0x224f90 (26 percent)
bbupdater: 0x98000 of 0x224f90 (27 percent)
bbupdater: 0xa0000 of 0x224f90 (29 percent)
bbupdater: 0xa8000 of 0x224f90 (30 percent)
bbupdater: 0xb0000 of 0x224f90 (32 percent)
bbupdater: 0xb8000 of 0x224f90 (33 percent)
bbupdater: 0xc0000 of 0x224f90 (34 percent)
bbupdater: 0xc8000 of 0x224f90 (36 percent)
bbupdater: 0xd0000 of 0x224f90 (37 percent)
bbupdater: 0xd8000 of 0x224f90 (39 percent)
bbupdater: 0xe0000 of 0x224f90 (40 percent)
bbupdater: 0xe8000 of 0x224f90 (42 percent)
bbupdater: 0xf0000 of 0x224f90 (43 percent)
bbupdater: 0xf8000 of 0x224f90 (45 percent)
bbupdater: 0x100000 of 0x224f90 (46 percent)
bbupdater: 0x108000 of 0x224f90 (48 percent)
bbupdater: 0x110000 of 0x224f90 (49 percent)
bbupdater: 0x118000 of 0x224f90 (51 percent)
bbupdater: 0x120000 of 0x224f90 (52 percent)
bbupdater: 0x128000 of 0x224f90 (53 percent)
bbupdater: 0x130000 of 0x224f90 (55 percent)
bbupdater: 0x138000 of 0x224f90 (56 percent)
bbupdater: 0x140000 of 0x224f90 (58 percent)
bbupdater: 0x148000 of 0x224f90 (59 percent)
bbupdater: 0x150000 of 0x224f90 (61 percent)
bbupdater: 0x158000 of 0x224f90 (62 percent)
bbupdater: 0x160000 of 0x224f90 (64 percent)
bbupdater: 0x168000 of 0x224f90 (65 percent)
bbupdater: 0x170000 of 0x224f90 (67 percent)
bbupdater: 0x178000 of 0x224f90 (68 percent)
bbupdater: 0x180000 of 0x224f90 (69 percent)
bbupdater: 0x188000 of 0x224f90 (71 percent)
bbupdater: 0x190000 of 0x224f90 (72 percent)
bbupdater: 0x198000 of 0x224f90 (74 percent)
bbupdater: 0x1a0000 of 0x224f90 (75 percent)
bbupdater: 0x1a8000 of 0x224f90 (77 percent)
bbupdater: 0x1b0000 of 0x224f90 (78 percent)
bbupdater: 0x1b8000 of 0x224f90 (80 percent)
bbupdater: 0x1c0000 of 0x224f90 (81 percent)
bbupdater: 0x1c8000 of 0x224f90 (83 percent)
bbupdater: 0x1d0000 of 0x224f90 (84 percent)
bbupdater: 0x1d8000 of 0x224f90 (85 percent)
bbupdater: 0x1e0000 of 0x224f90 (87 percent)
bbupdater: 0x1e8000 of 0x224f90 (88 percent)
bbupdater: 0x1f0000 of 0x224f90 (90 percent)
bbupdater: 0x1f8000 of 0x224f90 (91 percent)
bbupdater: 0x200000 of 0x224f90 (93 percent)
bbupdater: 0x208000 of 0x224f90 (94 percent)
bbupdater: 0x210000 of 0x224f90 (96 percent)
bbupdater: 0x218000 of 0x224f90 (97 percent)
bbupdater: 0x220000 of 0x224f90 (99 percent)
bbupdater: 0x224f90 of 0x224f90 (100 percent)
bbupdater:
bbupdater: Waiting...bbupdater: OK
bbupdater: Sending Image 'DSP2'...
bbupdater: 0x60000 of 0x23496e8 (1 percent)
bbupdater: 0xb8000 of 0x23496e8 (2 percent)
bbupdater: 0x110000 of 0x23496e8 (3 percent)
bbupdater: 0x170000 of 0x23496e8 (4 percent)
bbupdater: 0x1c8000 of 0x23496e8 (5 percent)
bbupdater: 0x220000 of 0x23496e8 (6 percent)
bbupdater: 0x280000 of 0x23496e8 (7 percent)
bbupdater: 0x2d8000 of 0x23496e8 (8 percent)
bbupdater: 0x330000 of 0x23496e8 (9 percent)
bbupdater: 0x388000 of 0x23496e8 (10 percent)
bbupdater: 0x3e8000 of 0x23496e8 (11 percent)
bbupdater: 0x440000 of 0x23496e8 (12 percent)
bbupdater: 0x498000 of 0x23496e8 (13 percent)
bbupdater: 0x4f8000 of 0x23496e8 (14 percent)
bbupdater: 0x550000 of 0x23496e8 (15 percent)
bbupdater: 0x5a8000 of 0x23496e8 (16 percent)
bbupdater: 0x600000 of 0x23496e8 (17 percent)
bbupdater: 0x660000 of 0x23496e8 (18 percent)
bbupdater: 0x6b8000 of 0x23496e8 (19 percent)
bbupdater: 0x710000 of 0x23496e8 (20 percent)
bbupdater: 0x770000 of 0x23496e8 (21 percent)
bbupdater: 0x7c8000 of 0x23496e8 (22 percent)
bbupdater: 0x820000 of 0x23496e8 (23 percent)
bbupdater: 0x880000 of 0x23496e8 (24 percent)
bbupdater: 0x8d8000 of 0x23496e8 (25 percent)
bbupdater: 0x930000 of 0x23496e8 (26 percent)
bbupdater: 0x988000 of 0x23496e8 (27 percent)
bbupdater: 0x9e8000 of 0x23496e8 (28 percent)
bbupdater: 0xa40000 of 0x23496e8 (29 percent)
bbupdater: 0xa98000 of 0x23496e8 (30 percent)
bbupdater: 0xaf8000 of 0x23496e8 (31 percent)
bbupdater: 0xb50000 of 0x23496e8 (32 percent)
bbupdater: 0xba8000 of 0x23496e8 (33 percent)
bbupdater: 0xc00000 of 0x23496e8 (34 percent)
bbupdater: 0xc60000 of 0x23496e8 (35 percent)
bbupdater: 0xcb8000 of 0x23496e8 (36 percent)
bbupdater: 0xd10000 of 0x23496e8 (37 percent)
bbupdater: 0xd70000 of 0x23496e8 (38 percent)
bbupdater: 0xdc8000 of 0x23496e8 (39 percent)
bbupdater: 0xe20000 of 0x23496e8 (40 percent)
bbupdater: 0xe78000 of 0x23496e8 (41 percent)
bbupdater: 0xed8000 of 0x23496e8 (42 percent)
bbupdater: 0xf30000 of 0x23496e8 (43 percent)
bbupdater: 0xf88000 of 0x23496e8 (44 percent)
bbupdater: 0xfe8000 of 0x23496e8 (45 percent)
bbupdater: 0x1040000 of 0x23496e8 (46 percent)
bbupdater: 0x1098000 of 0x23496e8 (47 percent)
bbupdater: 0x10f8000 of 0x23496e8 (48 percent)
bbupdater: 0x1150000 of 0x23496e8 (49 percent)
bbupdater: 0x11a8000 of 0x23496e8 (50 percent)
bbupdater: 0x1200000 of 0x23496e8 (51 percent)
bbupdater: 0x1260000 of 0x23496e8 (52 percent)
bbupdater: 0x12b8000 of 0x23496e8 (53 percent)
bbupdater: 0x1310000 of 0x23496e8 (54 percent)
bbupdater: 0x1370000 of 0x23496e8 (55 percent)
bbupdater: 0x13c8000 of 0x23496e8 (56 percent)
bbupdater: 0x1420000 of 0x23496e8 (57 percent)
bbupdater: 0x1478000 of 0x23496e8 (58 percent)
bbupdater: 0x14d8000 of 0x23496e8 (59 percent)
bbupdater: 0x1530000 of 0x23496e8 (60 percent)
bbupdater: 0x1588000 of 0x23496e8 (61 percent)
bbupdater: 0x15e8000 of 0x23496e8 (62 percent)
bbupdater: 0x1640000 of 0x23496e8 (63 percent)
bbupdater: 0x1698000 of 0x23496e8 (64 percent)
bbupdater: 0x16f0000 of 0x23496e8 (65 percent)
bbupdater: 0x1750000 of 0x23496e8 (66 percent)
bbupdater: 0x17a8000 of 0x23496e8 (67 percent)
bbupdater: 0x1800000 of 0x23496e8 (68 percent)
bbupdater: 0x1860000 of 0x23496e8 (69 percent)
bbupdater: 0x18b8000 of 0x23496e8 (70 percent)
bbupdater: 0x1910000 of 0x23496e8 (71 percent)
bbupdater: 0x1970000 of 0x23496e8 (72 percent)
bbupdater: 0x19c8000 of 0x23496e8 (73 percent)
bbupdater: 0x1a20000 of 0x23496e8 (74 percent)
bbupdater: 0x1a78000 of 0x23496e8 (75 percent)
bbupdater: 0x1ad8000 of 0x23496e8 (76 percent)
bbupdater: 0x1b30000 of 0x23496e8 (77 percent)
bbupdater: 0x1b88000 of 0x23496e8 (78 percent)
bbupdater: 0x1be8000 of 0x23496e8 (79 percent)
bbupdater: 0x1c40000 of 0x23496e8 (80 percent)
bbupdater: 0x1c98000 of 0x23496e8 (81 percent)
bbupdater: 0x1cf0000 of 0x23496e8 (82 percent)
bbupdater: 0x1d50000 of 0x23496e8 (83 percent)
bbupdater: 0x1da8000 of 0x23496e8 (84 percent)
bbupdater: 0x1e00000 of 0x23496e8 (85 percent)
bbupdater: 0x1e60000 of 0x23496e8 (86 percent)
bbupdater: 0x1eb8000 of 0x23496e8 (87 percent)
bbupdater: 0x1f10000 of 0x23496e8 (88 percent)
bbupdater: 0x1f68000 of 0x23496e8 (89 percent)
bbupdater: 0x1fc8000 of 0x23496e8 (90 percent)
bbupdater: 0x2020000 of 0x23496e8 (91 percent)
bbupdater: 0x2078000 of 0x23496e8 (92 percent)
bbupdater: 0x20d8000 of 0x23496e8 (93 percent)
bbupdater: 0x2130000 of 0x23496e8 (94 percent)
bbupdater: 0x2188000 of 0x23496e8 (95 percent)
bbupdater: 0x21e8000 of 0x23496e8 (96 percent)
bbupdater: 0x2240000 of 0x23496e8 (97 percent)
bbupdater: 0x2298000 of 0x23496e8 (98 percent)
bbupdater: 0x22f0000 of 0x23496e8 (99 percent)
bbupdater: 0x23496e8 of 0x23496e8 (100 percent)
bbupdater:
bbupdater: Waiting...bbupdater: OK
bbupdater: END: Sending 5 Images
bbupdater: Finalize...bbupdater: OK
bbupdater: Disconnecting...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 1...bbupdater: OK
bbupdater: Baseband VendorID [0x5C6] ProductID [0x9008]
bbupdater: Modem not booting
bbupdater: Modem not booting, attempts 1
bbupdater: Creating transport, attempts remaining 1...bbupdater: FAILED(kBBUReturnIOError)
bbupdater: Creating transport, attempts remaining 0...bbupdater: FAILED(kBBUReturnIOError)
bbupdater: Modem not responding
bbupdater: Modem must boot - attempts left 0
bbupdater: Attempting to erase EFS and restarting the update process
bbupdater: Forcing into first stage
bbupdate -
I restored my ipod touch (old version, silver back cover) but after erasing all the memory in it, Itunes showed me an error message ......The Ipod ''Ipod'' could not be restored. An unknown error occured (1)....What is the problem or how can I resolve this error?? please assist!!
This usually indicates a hardware problem.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Maybe you are looking for
-
My computer is asking me for my software name and password how can i recover this information?
need some help trying to download something and asks me for my software name and password how can i recover this information?
-
How to unmap a mapping inheried from a @MappedSuperclass
Hi, I have a superclass (annotated with @MappedSuperclass) which defines mappings for several fields. Is it possible for me to inherit all of these mappings except one? Is it at all possible to eliminate a mapping that comes from the mapped superclas
-
Recording of temperature, power and speed at the time of confirmation
Hi experts, My client requires to record the temperature,power and speed of the equipment while doing the phase wise confirmation. I'm planning to put inspection characteristics for the operations. I'm not going to use PI sheet. Is this inspection ch
-
Ungrouping an imported pdf into Illustrator
Is there a way to ungroup the elements of an imported pdf in Illustrator 6? Do you have to change the settings in Adobe Acrobat first to allow the elements to import individually rather than a group? Thank you.
-
Upgrade question CS3 E to CS5 E
Has anyone else noticed that CS3 Extended shows up as an eligibility in the chart for CS5 extended but doesn't show up on a version to select in the pre-order cart? Here's the question. I know it's eligible but since it's not listed and the documenta