IPhone 5 cant restore error 4005

Keeps showing this, gets stuck & won't restore

Put the device in recovery mode
How to perform a recovery-mode restore
If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.

Similar Messages

  • Iphone 4S Cant restore error 9

    Phone swithched itself off 2 days now stuck in boot loop with apple logo. I can get into dfu and restore mode but cant restore in itunes. Phone goes through preparing for restore and verifying with itunes then get the apple logo with progress bar it then waits a few seconds then phone disconnects and get error 9 in itunes. Tried on 3 different pc’s different leads and usb ports still get the same error.

    Experiencing exactly the same things, went to genius bar they said could be hardware problem but could not fix anything. Phone is pretty much dead and do not have any backup

  • 5s 8.1 iOS: Restore errors 4005. Won't update or restore

    Hi Guys,
    I downloaded the 8.1 update via the latest iTunes and connected my 5s to update.
    The update failed and i got the 4005 restore error: iOS: Restore errors 4005, 4013, and 4014
    Now when turn on the 5s it just shows the symbol to connect to iTunes.
    So I plug in and get this:
    I click 'Restore' then get this
    So I click 'Restore and Update', then I get Restore Error 4005 again and get stuck in an infinite loop!
    I did create a backup yesterday so I'm not worried about any lost data.
    I have deleted the update and I'm downloading again now. I will also try with a different USB cable and on a different PC.
    Any suggestions or a fix would be much appreciated?
    Thanks.

    Also FYI: The USB cable is a new authentic Apple lighting cable
    Okay so I deleted and downloaded the update via iTunes again, plugged in the 5s via USB and still get:
    After Restore and Update: 'Extracting software...'
    Then:
    Then:
    Then:
    'Extracting software...
    Then: Preparing iPhone for install.
    Now:
    And the 'Connect to iTunes symbol' disappears leaving the screen still turned on but all black.
    Then after a few minutes:
    Hope that helps...

  • IPAD 2 Restore errors 4005, 4013

    I have tried three different computers ( W7 en W8 ), fresh install itunes on one computer, latest version update on other two, different cables.
    After reading some forums:
    Running Itunes as administrator.
    Also manually downloading ipsw files and with shift key trying to restore from file.
    Itunes continually gives errors 4005 or 4013.
    Sometimes I get a screen:
    (FTL:MSG) APPLE NAND DRIVER (AND) RW
    (FTL:MSG) FIL_INIT            OK
    (FTL:MSG) BUF_INIT            OK
    (FTL:MSG) FPART INIT            OK
    read new style signature 0x43313141 ( line:389 )
    (FTL:MSG) VSVFL REGISTER        OK
    (WMR:MSG) METADATA WHITENING IS SET IN NAND SIGNATURE
    (FTL:MSG) VFL INIT            OK
    (FTL:MSG) VFL_OPEN            OK
    (FTL:MSG) YAFTL REGISTER        OK
    (FTL:MSG) FTL_OPEN            OK
    (NAND) _publishServices:642 FTL capabilities: 0x00000000

    If you are getting the same error codes with different cables and computers then contact Apple, it may have a hardware problem : iOS: Restore errors 4005, 4013, and 4014 :
    If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.

  • TS3694 trying to restore and update my iphone 3g but it keeps saying the iphone cannot be restored error code 1015 can anyone help?

    i am trying to restore and update my iphone 3g which i have just brought but it keeps saying iphone cannot be restored error code 1015 can anybody help please?

    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • The iphone could not restore error occoured (-1)

    the iphone could not restore error occoured (-1) in iphone 3gs

    This generally means a hardware failure.  You'll need to bring your phone into Apple for evaluation.

  • IOS: Restore errors 4005, 4013, and 4014

    Facing IP4S always power bling bling also during type text a few miniute back to unlock.
    Try Syc and restore BUT error iOS: Restore errors 4005, 4013, and 4014

    How did you try to restore?
    Try all options described here:  iOS: Not responding or does not turn on
    If necessary, back up your device try to restore as a new device to factory settings:
    See Use iTunes to restore your iOS device to factory settings  http://support.apple.com/kb/HT1414

  • My iphone 5s cant restore after display blue screen and now in restore mode and shoe error code 40 help me please

    friends help me plz
    my iphone is crashed and go to bloue screen
    i conect it to pc and try to restore but erroe 40 is display and cant continue restore
    what i do now?
    im in iran

    Hi aminno,
    If you are having issues with your iPhone being unable to restore due to an error, you may want to follow the steps in this article to get you back up and running -
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • HT1414 iphone stuck in recovery mode cant restore error cod 2001

    My phone is not able to turn on and when i plug it in on a charger it just says plug into i tunes. When i plug it into i tunes it says its in recovery mode and its going to restore then my phone just restarts and it says unable to restore Error code is 2001 Anybody know whats wrong????

    Hi Matt,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error2001
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Hope this information helps ...
    - Judy

  • IPhone 5 not restoring (error)

    My iPhone 5 is refusing to restore... After countless attempts to restore the phone it just won't restore
    It keep coming up with am error message... Or the phone can't be decked
    I took it to the apple shop the other week to see what was going on.. They said I need to replace the phone but I just can't afford a replacement
    Is there anyway I can get my phone working again it do I need a replacement
    They said the same when my iPhone 4 when Into Black Death but a month later I got it working.. So I don't Believe when the apple people say they can't do anything!
    HELP!!

    Hey Linard Michael,
    Thanks for the question. I understand you are experiencing error 4005 when attempting to restore your iPhone. The following resource provides a potential solution for this error:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, thentroubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    - Use another USB cable.
    - Plug your cable into a different USB port on your computer.
    - Try a different dock connector (or no dock).
    - Add (or remove) a USB hub between your device and computer.
    - Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Thanks,
    Matt M.

  • Liquid Contact Indicator? iPhone 4 not restoring (error 1611)

    My iPhone won't restore even though it is recognised by iTunes. After an initial 'restore attempt' process, I get the following error code (Error 1611).
    I have taken the iPhone to a technical repair store and after a quick examination, I was told that the iPhone had suffered water exposure and was out of warranty. I explained that this could not be possible as the phone had not been in water, was well looked after and was in immaculate condition. He proceeded to explain that the Litmus Paper indicator at the base of the device had turned colour. I again explained that I had not exposed the iPhone to water and queried how the iPhone could be perfectly functional during the evening, not be exposed to water during the night, but was dead the next morning due to apparent damage from water?
    After again explaining that the iPhone had not been exposed to water, I asked whether or not humidity could be a cause of water damage. He said yes, this was possible.
    Has anyone else experienced this type of issue? What can be done about a 1611 error?

    Try getting your phone in DFU mode. If this doesn't work, you most likely do have a hardware failure:
    1. Close iTunes.
    2. Connect your iPhone to your computer and then launch iTunes.
    3. Turn your iPhone off (hold down the power button at the top of the iPhone).
    4. Then, hold down the sleep/wake button and home button together for EXACTLY 10 SECONDS, then release the sleep/wake button.
    5. Continue to hold down the Home button until a message appears in iTunes telling you an iPhone in recover mode has been detected. When you are in DFU mode your iPhone screen will be completely black. Remember that if you see the restore logo, iTunes logo, or any message on the iPhone screen, you are not in DFU mode but standard Recovery Mode.
    6. Hit the OK message that should popup to restore your phone.

  • How to fix iPhone 2G itunes restore error 23

    Hi.
    I have had this iPhone 2g for a few years now. About three years ago my iphone 2g had displayed that there was no sim card while I knew my sim card was in there. I tried to restore and everything went downhill. To make a long story short, my iphone was unable to restore. No matter how many time si tried to restore it, i always got the error #23. Specifically it says:
    "The iPhone 'iPhone' could not be restored. An unknown error occured (23)."
    Now, itunes wants me to update my iphone firmware as well as restore it. I am not sure if this is contributing to the problem or not. Currently the iPhone is running 3.0.1 firmware.
    I have tried using Recboot to exit recovery mode, but then the iphone is stuck on the apple logo forever.
    Is there anything I haven't tried yet? Is this a fixable thing that I don't have to take to the genius bar or replace a part?
    Please, if you can help, it woudl be greatly appreciated.
    Thank you

    Hi Collett.cm,
    This article mentions the error code -1:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    This article also has instructions for restoring, in case they are useful:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Have a good one,
    - Ari

  • TS3694 iPhone 3 GS restore error 2001 or 2006

    Need help with restore error 2001 or 2006; I have updated iTunes and OS to latest releases. Thx, LJ

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • HT201210 iphone cannot be restored error (2003)

    Hi
    i have tried to restore my i phone using I tunes but on last i got a message stating that i phone cannot restore error (2003) can please help

    See if it helps
    Error 2001 - 2009
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • IPone 3GS activation problem  and IPhone 4s restoring error 4005

    I upgraded  my 3Gs  software  from 5 ro 6 but I can't activate it can't find SIM always says NO Service
    And I've IPone 4s I restored through Itune but it Can't be complteed error occurred 4005
    please help me to solve these problems

    Posting more than once makes things much too confusing for anyone trying to help; I've asked the hosts to remove the duplicate.

Maybe you are looking for

  • New Airport express not finding wireless network

    I just got a new AX plugged it in it was recognized did the set up and said to update. It went through the update but the amber light kept flashing. After the update I also lost my internet connection. I have to re-establish my internet connection ea

  • Calendar issue with the new iphone 6 plus

    I'm wondering if anyone is experiencing a problem with the default iphone calendar for iphone 6 plus?  I have consulted with apple's tech specialist both in store and online and they can't seem to figure out what's wrong.   They have apparently forwa

  • 4G LTE slow in San Diego

    Is there something going on in San Diego...Coronado area? Download speeds are HORRENDOUS! I did a download test and it came up at 130kbps. I've been a VZW customer for a long time and for some reason download speeds have always been really bad here.

  • MacBook Pro & iChat

    I am noticing a problem when using MacBook Pro with iChat. If I am invited as a 2nd or 3rd participant in an iChat Video Conference then all I see is myself in a preview window. The other participants do not appear on my screen until minutes later, i

  • IPhoto Movies marked as 1904

    I've seen a few other posts about this but they are archived for some reason so I cannot reply to those threads. I just upgraded to iLife 09/iMovie 09 hoping this might be addressed, no such luck! Is there anyway you can force iMovie to recognise the