Iphone 5 cant restore with DFU mode
Hello everyone i have a huge problem with my iphone 5. it turned off today because i went out of battery, so i charged it and tried to restart it but nothing happend. it stucked at the apple logo and nothing happens. so i tried to reatore it with itunes but i didnt work as well. i always get the error message 1603 or 1604 and if i try in DFU mode its the same. if i try to restore it my itunes is preparing the iphone and the iphone goes off and on again and the the same apple logo apears and not progressbar or so. just the same thing like booting. and i tunes kicks the iphone. i tried every solution to fix this 1604 or 1603 error, except using another usb cable but i dont think it will fix it.
what can i do? is my iphone totally broken now?
pls help me and sorry for the terrible english
i tried also another computer but i dont have another iphone 5 usb cable. i mean could this realy solve the problem? and i dont know if this helps but when i used windows i get the sound of conecting and disconnecting, and when i hit restore the phone gets disconnected and connected again and disconnected and connected againd and then just disconnected ... and im back stuck at the boot logo and after a couple of minutes i get the error message but the iphone was already kicked.
Similar Messages
-
I cant restore iphone. Itunes sees device, but I cant restore. DFU mode fails as well
I cant restore iphone so i can use as an ipod touch. Itunes sees device, but I cant restore. DFU mode fails as well. It acts like it's restoring but after verification, i still am back at square one.
When restoreing There is an n/a after capacity and serial number etc. After restore it restarts and recognizes device bu has iphone in large print in the window wher Capacity and serial number were. Any help would be appreciated.
-
Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
repeatedly tried from diffierent computers and the same error code pops up (error -1)That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).
-
Iphone3 stuck in recovery mode after too many password atempts and cant restore with itunes
iphone3 stuck in recovery mode after too many wrong passwords attempts cant restore with iTunes because it keeps giving an error code
See if the reply on this thread fixes it : I cannot update my iPhone 5 to iOS 6.1.2 because of iTunes error 2003.
-
Hi, I upgraded my Iphone 3gs from version 4.1 to 6.0.1 but upon restarting, the sim card is no longer recognized, i cant restore with itune nothing at all!! i'm so confused and ****** off... please provide any help
Is the SIM from the carrier the device is locked to?
Has the device ever been hacked or jailbroken?
Have you tried simply removing and re-installing the SIM? What about replacing the SIM? -
I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings please help me asap thankyou so much
Log in to icloud.com on a web browser with your Apple ID and disable FMiP there.
-
My iPhone charges normally trought power outlet, But it won't charge or recognize trough USB connection on my MacBook, even in restore or DFU mode.
Please help me! I'm stuck on restore mode.I tried on 3 different MacBooks, it doesn't work.
I have some updates though... It is recognized on my car sound system, and It is working fine when connected to a windows PC, I was able to normally activate it... so the problem is not on the connector, Macs just don't recognize it.
Anyone ? -
my Iphone 4S is stuck in DFU mode and its not responding connected to Itunes for a restore. I keep getting a 3194 error and 9006. Can any one Help?
What type of jailbreak was used on it?
-
iphone 4 black screen, tried dfu mode itunes not picking up device. not able to bring up red phone off slide bar or apple logo if any combination of button holding.
Phone was given to me by apple 2 weeks ago. Last I saw of it working was phone was off so i did the quick reset. Apple logo came up, it started up and keypad for passcode came up. It said 2% battery then went up to 64% a second later. When I was playing wth it not 5mins before it was at 65% so would make sence that later indication was correct. Before I could type the 4 digit passcode in the phone turned off to black screen. Now I have tried all possible reset options incuding the 10 second hold down of both buttons for less than 10 seconds and longer than 10 seconds. Nothing is working. iTunes is not recognising the device at all. Ive had it plugged into a wall socket for three hours and the computer for 2 hours and no signal of life. Ive tried the forums on here and the youtube vidoes and seem to know what im doing with resets. Anyone able to shed some light?Not being able to get DFU Mode indicates hardware failure. Since you recently received this iPhone from Apple it has at a minimum 90 day Warranty. Make Genius reservation or make service arrangements and take or send to Apple for resolution. Regarding what is actually wrong with the iPhone, it could be possibility of several things. But some of the features point directly to battery. First step in fixing this iPhone would be battery replacement. Then trouble-shooting from there if still problem. Take it to Apple.
-
My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. i cant go to DFU mode cause my home button is broken PLEASE HELP ME GOD I MISS MY IPOD TOUCH PLEASE :'((
i cant do that sir ,my ipod touch 4g keeps rebooting and rebooting all over again until the battery is empty HELP GUYS PLEASE
-
My iPhone 5 cant sync with itunes and its always stuck at the backup phase
My iPhone 5 cant sync with itunes and its always stuck at backing up phase. I tried to update my ios(mine is 7.1.2) and it states that the iphone update server could not be contacted. make sure your network settings are correct and your network connection is active. Likewise when I try to update my iTunes through the help column(check for updates), it also says the same thing as when I try to update my ios on iTunes. Please help!
Read here:
http://support.apple.com/kb/TS1538 -
My ipod does not appear in itunes.because only resrtartohet, can ndoenj so switch to restore in DFU mode.or something
I can't understand your question or problem...
B-rock -
My New Iphone 4 is restoring with the information from my old IPhone 3gs on Itunes. How do i get it to restore back to the 4g?
There is no 4g.
If you don't want to restore it with your old iPhone information, then just restore as a NEW phone, not from the backup. Don't quite understand what there's not to get. :-| -
My iPhone 3gs is stuck on apple logo even after a restore on DFU mode, what can I do?
Hi guys, I just got an iPhone 3gs from my girlfriend and it was working perfectly, I restore it from the phone by erasing all data on it, and it wont boot after that, it is stuck on the apple logo, I've tried restoring it in recovery mode and even in DFU mode, but it's not working, what should I do?
If you live near an apple store make an appointment. They will perform a DFU restore using known good equipment.
If that doesn't work you probably have liquid damage. -
Iphone 4 stuck at itunes logo, failed to restore/recover/DFU mode
Hi,
I just bought an Iphone 5 today. So I have decided to restore and update my Iphone 4. However, when I reset all settings and choose to update my Iphone 4, the screen shows the "connect to Itunes logo', and so I did (I TRIED ON MY MACBOOK / HP AND LENOVO), but all laptops' itunes gives me the same error message as mentioned in the next statement. It seems like all laptops aren't happy about my Iphone software and refuses to read it AT ALL.
System gives me the exact same '2001" error message saying that an unknown error occured.
N I also did the 'HOME + POWER BUTTON 10/20/45 seconds hold down and release home button way but it doesnt work (multiple times).
Last but not least, I followed the DFU MODE METHOD and it is also failure.
Tried to googled everywhere but it seems like no one has encountered the same issue as I am now.
Connect to itunes logo and tried the recovery/DFU/hold down the power and home button way and screen GOES BACK TO ITUNES LOGO. Sigh..
Experts, I really need help on this.. I need someone to tell me of a new/other way on how I can get my phone back up.Open iTunes on computer, connect iPhone to computer, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click the Restore button of iTunes. If still problem, try
DFU Mode Restore: Open iTunes on computer, connect iPhone to computer. Hold both Home and Power Button for exactly 10 seconds, then release the Power button, keep holding the Home button until iTunes recognizes the iPhone in Recovery Mode, the iPhone screen should be black, blank. Click the Restore buttons of iTunes.
iTunes needs to be up to date version 10.7, if you need this, click the iTunes tab at the top of this window screen.
Maybe you are looking for
-
Connection reset when uploading a report to ras server.
Hi, We're running the jboss app in the linux box and use the java sdk to extract the crystal report with the ras on the remote window box. We got the below exception when extracting one of the crystal report. Any idea what's going on? The trace log i
-
Installing Mitsumi 7-n-1 Floppy
Done plenty of searching but cannot find any info on the web with detailed instructions. This is a Mitsumi FA404M 7-n-1 Floppy USB drive oem version. The floppy cable port on the back of the drive has only 4 or 5 pins on the bottom row. I'm assuming
-
Hi, Now we are going with a project with CRM integration with BI 7.0 , i ahve few doubts regarding, 1) Can i have CRM tables and datasources, 2)Can we create Generic data sources in CRM 3) Can we go for data sources enhancing in CRM Kindly help me i
-
Having trouble connecting to Admin server
after the window update I can not connect to my Admin Server for Essbase Please advise Edited by: Next Level on Nov 13, 2011 11:05 PM
-
J'ai une erreur qui s'affiche au démarrage d'Itnues. L'erreur est (-42110). A quoi cette erreur correspond ? Merci de vos réponse. Pierre