Iphone 5 cant startup after charge for few hours

iphone 5 cant startup after charge for few hours, what can i do?

Hi there Liewminchuan,
If your phone is still not powering on, I would next try and reset the device with these steps from the article about that sort of issue:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
First, try to force your device to restart.
Forcing your device to restart won't erase the content currently on your device.
You can force your device to restart even if your screen is black or your buttons aren't responding.
Press and hold the Sleep/Wake and Home buttons at the same time for at least 10 seconds until you see the Apple logo.
If it still doesn't turn on, I would next use these steps to see if there could be an issue with the cable, or power adapter:
If you can’t charge your iPhone, iPad, or iPod touch
If the battery doesn’t charge, unplug your device and try these steps:
Look at the connector at the bottom of your device and make sure it’s free of debris.
If you're using a USB power adapter, make sure it's plugged in all the way and the power outlet is working. If you're connecting to a computer, make sure it's on and can charge your device. To charge an iPad, you might need to use a USB power adapter and plug into a power outlet.
Try a different USB cable, USB power adapter, or USB port.
If everything seems to be working, reconnect your device and wait for 30 minutes.
If the issue persists, I would next reach out to Apple support directly:
If your device still doesn't charge or you still see an alert after trying the steps above, contact Apple Support.
Thank you for using Apple Support Communities.
All the best,
Sterling

Similar Messages

  • I need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)

    i need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)

    Do you see a lightning bolt near the battery , Battery is charging (supposedly(  IF  not return to where  you purchased it  (also make sure that the charger is on)  if still not charging with lighting bolt bring it back

  • MBP harddrive makes a lot of noise after working for few hours

    Harddrive on My MacBookPro INtel 15" 2.0 makes nose after using it for few hours?
    It also overheats. I took it to Apple care and they performed series of test and found nothing. To be honest, this is the on laptop that I had which gave anourmous amount of heat. I cant put it on my laps so I wouldnt call laptop.
    Are these know issues?
    Thanks.
    M

    Did you consider to read your manual before you went into the store?
    Quote:
    "Using Your MacBook Pro
    When you’re using your MacBook Pro or charging the battery, it is normal for the bottom of the case to get warm. For prolonged use, place your MacBook Pro on a flat, stable surface.
    Do not leave the bottom of your MacBook Pro in contact with your lap or any surface of your body for extended periods. Prolonged contact with your body could cause discomfort and potentially a burn.
    The bottom of the MacBook Pro case functions as a cooling surface that transfers heat from inside the computer to the cooler air outside. The bottom of the case is raised slightly to allow airflow that keeps the unit within normal operating temperatures. In addition, warm air is vented from the slots in the back of the case."

  • IPod Touch 4G will not turn on even after charging for several hours.

    My iPod Touch 4G will not power on. I have attempted to charge it for several hours but still wont turn on. I tried charging it through a wall outlet as well as plugging into computer and going into iTunes. But still wont turn on. Does anyone have any suggestions other than taking it into the Apple store? (already have an appt scheduled).

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • LabVIEW program crashes after running for few hours

    Hello,
    I am doing some experiments at the moment which are supposed to last for 18 hours.
    Basically, I use a LabVIEW program to control a power supply through a LabJack U6 DAQ. I am currently using LabVIEW 8.5 on Windows 7.
    In order to do that, I use a laptop where everything has been disabled such as power management settings, network access is off, windows updates are also off...
    As far as I know, the computer can't turn into sleep mode or just shut down (I'm a 100% sure of that actually).
    But last night, I started an 18 hours experiment at 5 pm, and when I came in this morning, the program shutted down by itself. Fortunately, the power supply is still providing the voltage I want, but I can't figure out why the program crashes.
    When I start the experiment, it also automatically starting saving data in a spreadsheet file (I guess the size of the file should be 36 MB), so it might be a problem of memory access or something.
    I really don't know what could have cause this crash, does someone have an idea?
    I saw some other threads similar to my problem but I am not running an executable, I am running the front panel directly from the editing mode.

    Hi,
    thank all of you for your quick answers!
    @Josborne : I do not have an error handling in my program. Actually you can look at my program in the attachment file. This is my first LabVIEW program so I've never dealt with error in and error out function... Moreover, what is a log file exactly?
    @Johnsold : Yes, I am building an array continously growing over time. Actually, my program stops saving data when you hit the "STOP" button, it doesn't write into a spreadsheet file through a period of time, that is something I eventually need to correct.
    @LabJackSupport : I can try to reduce my time step, so far it's 100 ms. I have a problem with disconnecting the USB cable from the computer though : for no reason, if I just unplug the connection between the LabJack U6 and the computer, my power supply will just go providing 157 Volts! And for my experiment, this is something we don't want to have so we just leave it as it is now. Disabling some part of the program is a good idea, I can try it
    Thank you for your answers
    Attachments:
    Control Software.vi ‏511 KB

  • HT201412 My Macbook pro freezes for few minutes every time I startup after charging

    My Macbook pro freezes for few minutes every time I startup after charging
    I am using the latest update of IoS

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    :[[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Is there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?

    s there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?
    Sometimes i sleep and the my iphone is charging and of course the battery became full after two or three hours, and definitely i will not wake up in the midnight to just disconnect the charger, please i need your help.

    This is considered normal use. I think everybody does this, including myself. It's not something to worry about in the least bit.
    Just remember to complete a full charge cycle (allow the phone's battery to discharge to 10%-20%, then charge uninterruped to 100%) once a month and you'll be fine.
    http://www.apple.com/batteries/iphone.html

  • Why after update Iso 5 by iPhone and not open, without using Itune. Just screen keep show apple logo for few hours already.

    Why after update Iso 5 by iPhone and not open, without using Itune. Just screen keep show apple logo for few hours already.

    Try to reset - Press both the home and on/off buttons for at least 10 seconds until the Apple logo reappears.

  • I did not charge my ipod for a month but after charging for a night  i cannot turn it  on?

    i can't boot it . even after charging for whole night

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPhone 4 died and won't turn back on. It's been on the charger for 17 hours.

    Last night my phone went completely dead while I was doing something for school. I put it on the charger as soon as I got into the car, maybe 30 minutes after it went dead. It's been charging for 17 hours and still shows an empty battery with a flash underneath.
    I've tried everything. I've attempted a hard reset multiple times, the screen goes black for maybe two seconds and then the empty battery comes back. Tried restarting my computer while my phone was plugged into it. Tried pressing the home button while plugging it into my computer. My computer isn't recognizing it when I plug the phone in.
    I am desperate. I don't have the money to buy a new phone. Please help.
    It hasn't been dropped. No water damage. I've never broken an iPhone before.

    Your only chance is connecting in recovery mode, as explained in this article:
    http://support.apple.com/kb/HT1808
    iTunes has to tell you that it found an iPhone in recovery mode, otherwise you can't be sure that you put it into recovery mode.

  • How do i turn on my ipod touch 5th gen after its been charging for an hour, how do i turn on my ipod touch 5th gen after its been charging for an hour

    my ipod 5 has been dead for about a day and now it wont turn on after an hour of being charged what do i do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPod touch 4g will not turn on after charging for a day what do I do ?

    please help

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens

    My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens. PLEASE HELP

    I have a similar (if not the exact same) problem! Here are some more details if they are helpful.
    My iPhone 4 died earlier today and will not turn back on. It seemed that the battery died while it was not in use. I attempted to charge it on one charging cord in multiple wall outlets and none worked. Assuming it was a malfunction in the cord, I took my phone home to try charging it there.
    Again, I attempted charging it in multiple outlets with a different cord than previously used. None of these seemed to work, though they would flash the Connect to Power screen for a brief moment before returning to a black screen. I assumed that my phone was simply so depleted of battery that it needed a long charge.
    I charged it for 30+ minutes without any success, then attempted to charge it through my MacBook instead of through a wall outlet. iTunes did not even recognize that my phone plugged in (and still hasn't). I've attempted charging it for an extended period of time (1+ hour) with no luck. Sometimes when I press the Power button it will flash the Connect to Power screen once more before returning to black.
    The Apple logo never appears, nor does any apparent progress on charging. I have attempted holding down the Power and Home buttons simultaneously for 10 - 30 second increments. Still no luck. There is no reason anything should be happening with this phone that I can identify.
    I have no warranty and just recently replaced my previous phone which had had similar problems before completely crashing. This is a phone new to me that was previously used but in almost new conditions and factory reset by Apple prior to my purchase.
    Does this mean that my phone battery is dead?
    Is there anything else I can do??

  • PO creation where discount is given after taxes for few Vendors

    Hi pankaj,
    Need a pricing stucture in PO creation where discount is given after taxes for few Vendors.
    please give the solution with brief steps.
    Regards,
    Pandi

    Hi,
    Take a copy of RA01 in M/06 as YA01(as Discount) and keep it as following;
    Cond. class A Discount or surcharge
    Calculat.type A Percentage
    Cond.category Blank
    And Plus/minus - A (Positive)
    Use this in Pricing Procedure ( M/08 ) after Gross Price ad Discount conditions (before Subtotal) and assign Subtotal "6" against this condition type.
    In OBQ3 - Tax Procedure, assign AltCBV 363 to CST/VAT Condition Type (JIP1/JIP5)
    Now check the calculation will happen as following;
    Gross Price = 10000 INR
    Discount (as -ve/+ve) = 1000 INR
    BED 14% = 1400 INR
    ECS 2% = 28 INR
    SECess 1% = 14 INR
    CST 2% = 248.84 INR
    Also refer following thread for the same;
    [Calculation Procedure;

  • Please help me..?! My iphone 4 is low battery so i'm charging for 8 hours and i turn on it..But the iphone 4 can't turn on..!! Please help me..!!

    Please help me..?! My iphone 4 is low battery so i'm charging for 8 hours and i turn on it..But the iphone 4 can't turn on..!! Please help me..!!

    Try
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Maybe you are looking for

  • Advice on saving report configurations

    Hey everyone. I'm looking for some feedback on saving a report configuration.   Basically I will have a series of drop downs for a report to be generated.  For example on a downtime report, the user wants to generate 10 charts in the report, first ch

  • Apps forms - error in metadata grid - jtf_grid.reset

    Hi, I am getting an error in one of the apps forms (this is customized). The error is APP-JTF-210604: Program error.. JTF_GRID package reports error: DEVELOPER ERROR: jtf_grid.reset reports that: grid <ASTLGEN_GRID.ITEM_GRID> has not been initialized

  • Unplanned cost in miro

    Dear Forum, I would like to seek clarification on unplanned cost book during miro. For planned, it will credit vendor debit freight clearing account. For unplanned, it only can be prorated and distributed in the po item lines. Unplanned cost cannot b

  • IMac makes weird start up noise

    I got my iMac like 4 days ago and it is awesome. I looked at start up videos and I noticed that my iMac made a different start up noise than other ones. I have a refurbished iMac with a 3.06 GHz processor, and an nVidia GeForce 8800GS graphics card.

  • Time Machine Encryption - Cannot Prepare Disk

    When i select my USB hard drive in Time Machine and tell it to use Encryption, I get the following error: There was an error preparing the Time Machine backup disk "<disk name>".  Invalid request. This happened before and after I successfully encrypt