IPhone 5 , Converter / HDMI/AV / AV/AV Component / RCA Adapter and Cable to connect to HD TV

I have the iPhone 5. I have the 8 pin to 30 pin converter adapter. I have a 30 pin HDMI/AV adapter. I also have the 30 pin AV/AV Component Cable (with RCA plugs). Can I connect my iphone 5 to my HD TV with these cords? If so, please explain how because I have tried my best to figure it out. I can get my husband's iphone 4 to connect and show on the TV but can not get my iphone 5 to.

Yes, cable works fine alone with it. I thought it might be something to do with the iphone power adapter and tried using the higher powered ipad adapter, but had the same results.

Similar Messages

I have an older Hitachi widescreen 1080p TV that has a DVI input, no HDMI input. Is there an adapter and if so will it still work?

I have an older Hitachi widescreen 1080p TV that has a DVI input, no HDMI input. Is there an adapter and if so will it still work?

As HDMI is the only supported method there will no guarantee with any converter.
DVI doesn't tranfer audio so you would have to either go through optical to connect speakers, or use a DAC in connection with analogue speakers.
Also, unless the TV is HDCP compliant you will be unable to play protected content (ie iTunes, Netflix)

I've jail break Iphone 3GS. i tried to restore setting (erasing all data and media) without connecting to computer/itunes. When it starts it freezes by showing apple logo only. what is the solution.

i've jail break Iphone 3GS. i tried to restore setting (erasing all data and media) without connecting to computer/itunes. When it starts it freezes by showing apple logo only. what is the solution. please help me out. Here i don't have iphone service center too.

Although not illegal, Apple discourages a user from modifying the iPhone OS in any manner, including "jailbreaking". Apple feels so strongly about this that discussing methods to assist a user trying to either jailbreak or "unjailbreak" an iPhone are prohibited.

HT4644 How do I get an image on a Samsung TV via HDMI adapter and cable. Currently get only a static imgae of desktop and gray grainy screen for everything else.

How do get an image on a Samsung HD TV via HDMI adapter and cable?
Currently get a static image of the desktop and then a grainy gray picture.

If it's like mine, I used another post's advice. Go to system preferences, then display and click on "mirror". Then in system preferences go to sound and click on "HDMI". I did this while I was connected to my Samsung TV and it worked then.

I awoke this morning to find my iPhone 3g in recovery mode. I tried rebooting, charging, and when I connected to iTunes it gave me a message saying I had to finish recovery first. My screen shows the iTunes logo and the USB cable. Any ideas?mode

I awoke this morning to find my iPhone 3g in recovery mode. I tried rebooting, charging, and when I connected to iTunes it gave me a message saying I had to finish recovery first. My screen shows the iTunes logo and the USB cable. Any ideas?

http://support.apple.com/kb/HT1808

Download of 8.2 ios on iPhone 5s caused phone to lock up with iTunes icon and cable icon on screen .Will not reboot. What is fix.

Download of 8.2 ios on iPhone 5s caused phone to lock up
with iTunes icon and cable icon on screen .Will not reboot. How to fix?

Hello jh901,
After reviewing your post, it sounds like you have not been able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I unknownly deleted photos from my iphone 4,version 4.3.5,i dont have icloud and did not connected to itunes before deleting the pics,how can i recover those photos?

i unknownly deleted photos from my iphone 4,version 4.3.5,i dont have icloud and did not connected to itunes before deleting the pics,how can i recover those photos?

you cannot recover those photos if you didn't perform a backup of the iPhone 4

HT204023 Hey guys I am having a problem. Could you guys give some suggestion? I can connect personal hotspot from iPad 5 to iPhone 5s via Bluetooth but the wifi doesn't recognize and can't connect. USB and Bluetooth sharing of hotspot is okay but wifi do

Hey guys I am having a problem. Could you guys give some suggestion? I can connect personal hotspot from iPad 5 to iPhone 5s via Bluetooth but the wifi doesn't recognize and can't connect. USB and Bluetooth sharing of hotspot is okay but wifi doesn't

troubleshooting hotspot http://support.apple.com/kb/TS2756

Does the iPhone 4S support HDMI- OUT via the digital AV adapter?

Does the 4S support HDMI ->OUT via the digital AV adapter or not? I read that it does (whether it be mirroring, YouTube video playback, movie playback, etc.) but I'm not having any luck. I recently tried my AV adapter (that I normally use with my iPad 2) but I get nothing. When I power cycle the phone after connecting the adapter, I get a error stating that the "accessory is not supported by iPhone". When I go to play a YouTube video, it shows up on the phone's screen for a second and then disappears. The LCD TV I am connected to never prompts me for the detection of a new HDMI device being connected" either, do I have no clue what's going on.
Any ideas? Thought?
Any help to solving this riddle once and for all would be appreciated.
Thanks and Happy New Year!!
Andy
P.S. - my 4S is running iOS 5.0.1 and is a Verizon 16gb model.

The model number on the adaptor is A1388. The link is here:
http://store.apple.com/us/product/MC953ZM/A?fnode=MTc0MjU4NjE
I have the iPhone 4s, running 5.0.1 (9A405)
I have also experimented with sequence, and I see no particular order needed to make it work. Generally I get it all plugged in and then swipe the iPhone and in a few moments, the screen appears in mirroring mode. Then if I go to Videos I can play my clips with sound, or I can do Keynote presentations, etc.
So sorry to hear you're having trouble. I imagine you've already double-checked that you're seating it solidly in the dock connector and have a good, working HDMI cable. I am not sure what you mean in your original post about "powering up" the phone. It might also be some Verizon issue, though I don't know what that might be. Is your AV adaptor the Apple branded one?

After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT1476 After update to either iOS 7.0.3 or 7.0.4, my iPhone 4S won't charge. I'm using charger and cable that came with the phone. Nothing else changed.

I'm using charger and cable that came with the phone. Nothing else changed.
I think it was the update the iOS 7.0.4 that I did last night. I woke up this morning with my battery almost drained and the charging function going off and on every few seconds, like it would start charging then disconnect, then reconnect repeatedly.
I've tried restarting the phone and hard restarting the phone several times, but I'm getting really low on battery by now (under 20%).
I've tried cleaning the connector with a little isopropyl alcohol, and blowing it out with compressed air. Though I can't be 100% certain, it's very unlikely my connector died exactly at the same time I was updating my phone. Especially since it appears I'm not the only one with this problem.
And now, after the last hard reset, my phone doesn't even recognize the charger at all, or being connected with the USB cable to my MacBook Pro.
I turned off my phone so when I go to the Apple Store it will power up one last time, but besides that I'm out of ideas.

Just back from Genius Bar and two other people at my table had the same problem. Their 4Ss aren't charging either. One of them had a fried board according to the tech. At least my HW checked out OK. It just won't charge.
The tech tried to tell me that it was because my connector was corroded, which I told him was kind of a weak argument since evidence points to that the update has something to do with it.
They're seeing a lot of these and it looks like they already have a script.
Luckily I had enough juice left to recycle it for like $180, so I picked up a 5S with a new 2 year.
It looked to me like this is going to blow up pretty big. Like class action lawsuit big.
If you have an iPhone 4 or 4S, and you haven't updated it to iOS 7, don't for now. See if a patch comes out that doesn't brick your phone. Or get an induction charger maybe? Don't just update and expect absolutely no problems because too many people are having problems right now.

IPhone 4s not recognized by windows 8 after updating iOS and stuck on "connect to itunes" screen

I tried updating the iOS on my iPhone4s and now it is stuck on the connect to itunes screen. It also doesn't show up in the devices folder of my computer (windows8.1) but makes the notification sound when connected to a usb port. It also isn't recognized by itunes, but that's probably because the computer doesn't connect to it either.
I've tried reinstalling iTunes multiple times, updating the driver for the usb port, and pressing the sleep/home buttons as i connect it but nothing has worked and I'm still stuck on the connect to itunes screen.
Also, every now and then, the iphone screen blacks out and the disconnected from computer sound plays, then a second later connects again

Hello, chipperp.
Thank you for visiting Apple Support Communities.
Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue persists, try the troubleshooting steps in the first article below. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

HT201210 Iphone 5 can not save my router of 2.4ghz and does not connect more than 3 minutes but Iphone 4s has not that problem in the same router.

My iphone 5 is not saving my unlocked router. My router is linksys and is 2.4 ghz, My other devices such as iphone 4s and ipad2 have not had that problem with router. My iphone 5 connects hardly to my router but does not stay connected more than 3 minutes within the range.

Try rebooting your router by removing all power from it for about 15 seconds.

PeopleSoft Component Interface adapter and PT version 8.51

Hi,
After upgrading to PT8.51.14 I have problems with a create of the userProfile in the Peoplesoft resource (Campus Solutions). Updating, locking, unlocking and deleting a userProfile works fine, but a create results in an error:
com.waveset.util.WavesetException: An error occurred adding user '10173439' to resource 'CS'. psft.pt8.joa.JOAException: TPESVCFAIL - application level service failure.
According to the 8.1.1 release notes this unclear error means: a resource account password or username is not correct on a PeopleSoft resource.
Has anyone seen this error before? How did you fix it?
Has anyone got Oracle Waveset working with PT version 8.51.x?
Greetings,
Marijke

To answer my own question: PT 8.51 may not be supported, but does work after I changed the attribute name 'EmplID' to 'Empl ID' in the code that sets the CS resource attributes.
Also, I had to adjust the Peoplesoft password controls to match the IDM password policy.
Strangely enough, that was not a problem with PT8.48, apparently the password controls were ignored at account creation.

For apple tv 3, I"m using a hdmi convertor box to component and only get the apple symbol at first, then it disappears, tried more than one convertor box

Tried converting hdmi into component, two different converter boxes, one worked at first and then stopped. Any suggestions? I know the apple tv is working because I tested it on another tv using the hdmi cable to tv.

Welcome to the Apple community.
Signal Conversion.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)

IPhone 5 , Converter / HDMI/AV / AV/AV Component / RCA Adapter and Cable to connect to HD TV

Similar Messages

Maybe you are looking for