Iphone 5 earbud failing sound
The left earbud sound was completely gone. So I removed the wired mesh with an exacto knife, and the sound has been completely restored. Is there any danger in using this earbud without the mesh?
the sound on my 5 went out and Apple genius just replaced the speaker.
Similar Messages
-
When I am trying to use either maps or scout with earbud the sound is often like a whisper; even turning up the sound does not work..I ask siri a question or even play music and its fine.
Its an off an on problem..Since its a new phone and I was near a store i walked in and asked them. It worked fine for them, and for the next couple of hours; then it did it again. Raised the sound level and it did not help, yet siri came in loud and clear on the ear bud, along with music.LIMSRUNTEK wrote:
detail : iphone 6 [official no jailbreak] IOS 8.1
I do all reset setting / content it still not working all of system notification sound not working included [ call , sms , keyboard , log sound ......] hear nothing only vibrate
I know I know this maybe firmware problem how can i reinstall or downgrade 8.1-8.0
I face alot of problem with all version of ios that suck
if your product like that agian there will be no ios user it only android user
IF you only hear vibrate, then turn the switch up to ringer using the side control. You probably have it on silent or vibrate.
If you're using a case remove the case and make the swtich. -
What shall i do my iphone showing activation failed during startup?
what shall i do my iphone showing activation failed during startup?
Hi funkeyankey,
It sounds like your phone is not activating correctly when you are trying to set it up. I would recommend the troubleshooting from the following article named:
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
Restart the iPhone.
Try to reach the activation server another way, then try to activate.
Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
Try connecting to iTunes if you can't activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
If you're asked to enter a password to proceed with activating the iPhone, Activation Lock might be enabled as part of Find my iPhone.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
My earphones for my iPhone 4s make the sound a little higher pitched?
I have had an iPhone 4s since about tr beginning of December 2011. even before I had the iPhone I had the song we found love by Rihanna and it is still by far my favorite song. however I cannot enjoy it on my iPhone because when I listen to it with my earbuds it is at a higher pitch than normal. as in the background music is not at a higer volume but it sounds as if someone raised the pitch of the whole song. with one earbud it sounds fine but with both it is different. when I first got the 4s I had a black one and it did the same thing. I switched that one for a white one (not for the earbuds but because the firmware itself was defective). hoping the issue would be fixed I tried it again and it still does the same thing. any input?
thanks. help is greatly appreciated. :)and I also forgot to say that it doesn't happen through the speakers. and if I wear the earbuds it only happened when I make the volume louder.
-
Cannot erase iPhone 4 - verification failed - timed out
cannot erase iPhone 4 - verification failed - timed out. can anyone help?
Hey there crazylegsoz,
It sounds like you are unable to restore your phone with iTunes because the connection keeps timing out. There can be a number of causes for this, so I would use the troubleshooting from the following article to help resolve or isolate the issue:
iTunes: Resolve USB-related alerts
http://support.apple.com/kb/TS5254
Check connections
Try these steps to check the connection between your device or computer. You might need to do only one of these steps to resolve the issue, so test your connection after each step.
See if the cable connection at the device or computer has come loose or unplugged.
Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
Close any virtualization apps (such as Parallels or VMWare).
These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
Restart your computer.
Restart your iPhone, iPad, or iPod touch.
If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
Update to the latest version of iTunes if you haven't already.
Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
Thank you for using Apple Support Communities.
All the best,
Sterling -
How to use iPhone 5 earbuds with MacBook Air 13"
As far as I know it is possible to use the latest iPhone 5 earbuds for not only audio output, but also as a microphone, if the usage concerns the actual phone. I want to use it for my MacBook Air 13" Mid 2012, but they do not seem to work. I have checked the System Preferences > Sound > Input and the Input level only rises, if I actually click on the center of the earbud controls. Afterwards, while holding or releasing, the Input level goes down again and there is no input at all.
I am not keen on other people listening to my conversations (apart from my voice, which is inevitable), hence I am trying to get this to work, but I haven't found any solution.
Thank you in advance for your help.Yes, that IPHONE5 earphone headset / mic works on the newest Macbook AIR see spec pic below:
-
Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.
Hi saiyed adil,
Thank you for contributing to the Apple Support Communities.
It appears that your iPhone 5s sometimes produces low sound, but a restart corrects it.
It can take some time to isolate and resolve intermittent issues like this one, and I'd recommend going through the steps in this guide the next time it occurs:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy -
I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?
I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck! -
I would like to play music from my iphone 5s on a sound bar with an iphone 3 dock. Is there an adapter available that will play audio please?
The genuine Apple adapter works for me, most cheap knockoffs do not support sound ,it is usually in the micro print at bottom of the ebay offerring
It is pricey by comparison but it works and the knock offs usually don't pay the patent licence fee hence they guess the technology that is in the lightning plug
and charge a minimal price -
my iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, ive just buy it yesterday in Mediamarkt Spain,, so it means theres something wrong between my iphone and the apple tv? please me
Hi jaredfox06,
If I understand the issue correctly, you have recently purchased a used iPhone and you do not see your Apple TV in the control center in order to AirPlay. To troubleshoot this issue please follow the steps outlined below.
Try these steps first
Make sure that you have the latest software on your iOS device and Apple TV.
Make sure that both devices have Wi-Fi turned on.
On your iOS device, go to Settings > Wi-Fi.
On your Apple TV, go to Settings > General > Network.
If you're trying to use peer-to-peer AirPlay, make sure that both devices have Bluetooth turned on.
On your iOS device, go to Settings > Bluetooth.
On your Apple TV, go to Settings > General > Bluetooth.
If you don't see AirPlay in Control Center
When an AirPlay-enabled device is available, you'll see AirPlay in Control Center on your iOS device.
If you don't, try these steps:
Restart your iOS device and Apple TV.
Connect both devices to the same Wi-Fi network.
On your iOS device, go to Settings > Wi-Fi.
On your Apple TV, go to Settings > General > Network. If your Apple TV is connected using Ethernet, make sure that it’s plugged in to the router you're using for Wi-Fi.
On your Apple TV, make sure that AirPlay is turned on. Go to Settings > AirPlay.
Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
Have a good one,
Alex H. -
My iphone doesn´t play sound on logitech pure-fi anywhere
Hi,
my iphone 4 recently quit playing music over the logitec Pure-Fi Anywhere Speakers. It did before but it doesn´t anymore. My husbands iphone still cooperates so it can´t be the speakers who are broken. My iphone still plays the sound on it´s own speakers but it won´t play them loud on the logitech speakers. I had this problem before but after a while it worked again ... is it a button I need to press or something else I am missing?
Thanks!Reset your iPhone while it is connected to the PureFi: Hold down the home and sleep buttons, ignore the red Off slider, wait for the Apple logo and let go.
-
After upgrade my iphone 4 to IOS6, sound doesn't work correctly
After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio -
My iphone 4 wont play sound through the internal speaker. Will play if I hook up headphones. I have reset it, restored it, and it does the same thing. I can still hear when i make calls too. The the output button only says dock connector or apple tv.
If the phone has ever gotten wet it may be damaged. It may also have dirt or a bent pin in the dock connector or the earphone jack. Try cleaning the dock connector and inspecting it with a magnifying glass. Try inserting and removing the earphone plug several times. If you have restored it and that did not fix the problem damage is the most likely cause.
-
Hello,
From some months I experience the problem with the sound of the iPhone 4s. The sound is really low. You can only hear it if you put your ear very near to the speakers. I've tried everything. Settings -> Sounds to max. Restarting the iPhone. Once I've played Flappy Bird, the sound like fixed itself for 2-3seconds. From low sound it turned very loud but for 2-3 seconds. Then I've tried Restoring the iPhone to its factory settings - nothing again. I lost and my Flappy Bird...
So my Question is - can we fix the sound problem and return my flappy bird? I can't download it from the gamecenter.vikAy,
Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action.
All my best,
Allen -
I tried several times to backup my iPhone 5 but failed.
Several times it only run for 1 minute and told me 'the last backup could not be completed.'
This morning, it run for almost 1hr and told me the same.
The last backup still keeps in 2013.
What should I do?
I am sure I have enough space to backup!
Please help.Delete the backup and try again.
Computer iTunes > Preferences... (Windows: Edit > Preferences...) > Devices > mark your back and click Delete button.
Maybe you are looking for
-
I don't have a Mobilesync folder
Hi! I recently got an iPad mini. I'd like to delete the Mobilesync folder on my Macbook because the iPad takes so much space. I know Mobilesync is supposed to be under the "Application Support" folder but Mobilesync wasn't there when I checked out th
-
Content server Migration 7.6 to 7,8
Hi Experts, we have two SAP content servers: - An old one Win2k3 (32bit) with MaxDB 7.6.00.18 and nearly 200GB of data - A new Win2008R2 server (64bit) with SAP MaxDB 7.8.02.29 and 150GB of data We´d like to move all data from the old 7.6 DB onto the
-
Code of Conduct Service not showing in ESS
The Code of Conduct Service PDF is not showing up, it appears as if it's loading and eventually stop without showing, No error is given it just doesn't show up on the page. The Code of conduct form has been created in ERP using Adobe Form Designers a
-
Please help! If anyone has any idea why or how my iPhone shut off and wont turn back on it owuld be greatly appreciated! It was working all day and even seconds before it shut off. I thought it might have died but i have it plugged in and it isnt wor
-
Can SQLPLUS locate scripts on a hard drive??
Using the GUI SQLPLUS (not the command prompt) how do I locate scipts on my hard drive that I want to run? A friend showed me that I can use the command prompt to CD to a directory then run SQLPLUS from within that directory using the command prompt