Iphone 5 Email client fails when connecting to server with certs signed by personal CA

My mail resides on my own server with its own private CA that was used to sign the email server cert.
I used sendmail and CA and certs were created with below commands:
CA -newca
openssl req -newkey rsa:1024 -nodes -keyout sendmail_req.pem -out sendmail_req.pem
openssl ca -out sendmail_cert.pem -infiles sendmail_req.pem
Before I switched to iphone 5 I had Iphone 3s and all worked fine.
I would get a notification: cannot verify server identity, but after clicking continue all would work fine.
The client would connect on port 993 to receive email and on port 587 to send.
Now on iphone 5 I get error: Cannot verify Server Identity with no prompt to accept the cert.
Is there any work around for it?
I tried to export the cert from I mac and import to iphone but still no luck.
It looks like since iphone 4 the certs not issues by legal CA's don't work?
thx

I fixed that by getting certs from: https://www.startssl.com/?app=1.
The certs are free and work fine.
Since Iphone 4 apple does not accept unknown CA Authorities.

Similar Messages

  • Sync always fails to connect to server with no reason

    On two of my computers (both Macs running 10.6.7, one a MacBook Air and one an older iMac), Sync fails, saying "failed to connect to server"
    When I try again (and again, and again...) it results in the same message. It has synced successfully in the past, but has not in more than a week.
    I can't figure out how to get it to sync or even how to get more information about the issue.
    Any help, ideas or suggestions - including questions clarifying or detailing the issue - are welcome.
    Thank you!!

    If Oracle reports error about Net8 configuration, that means -
    you're trying to use "thick" JDBC driver, though usual way
    is to use "thin" driver instead. You have to make corrections
    in your connect url like:
    "jdbc:oracle:thin:@<host>:<port>:<sid>"
    ^^^^
    look here-----|
    Hope this will help
    Paul

  • ORA-12699: error when connecting to server with FIPS enabled

    Hi all,
    I have a oracle client and server with FIPS enabled on them. When I use SQL Developer from the client, I can connect to the server and run queries on them.
    I have an ADO based application, which I am trying to run on the client to query the oracle server, but the open database call seems to fail on this with the ORA-12699 error ..
    Heres the connection string I am using ... "Provider=OraOLEDB.Oracle;Data Source=Test;User Id=scott;Password=tiger;"
    Are there any other options to be added to the connection string string ?? any ideas / comments would be of great help ...
    Note : I am using Oracle 11G ..
    --sachi                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Naveen,
    Forms 5.0 is not certified and not tested with Oracle DB 10g because it was desupported before 10g got released.
    The other problem is hard to give a generic answer for and I suggest to address this to metalink.oracle.com
    Frank

  • Possible to select self-signed certificate for client validation when connecting to VPN with EAP-TLS

    In windows 8.2, I have a VPN connection configured with PPTP as the outer protocol and EAP : "Smart card or other certificate ..." as the inner protocol. Under properties, in the "When connecting" section I've selected "Use a certificate
    on this computer" and un-checked "Use simple certificate selection".
    My preference would be to use separate self-signed certificates for all clients rather than having a common root certificate that signed all of the individual client certificates. I've tried creating the self-signed certificate both with and without the
    client authentication EKU specified, and I've added the certificate to the trusted root certificate authority store on the client. But when I attempt to connect to the VPN I can not get the self signed certificate to appear on the "Choose a certificate"
    drop down.
    Are self signed certificates supported for this use in EAP-TLS? If it makes a difference, I'm working with makecert (not working with a certificate server).
    TIA,
    -Rick

    Hi Rick,
    Thank you for your patience.
    According to your description, would you please let me know what command you were using to make a self-signed certificate by tool makecert? I would like to try to reproduce this issue. Also based on my experience, please let me
    know if the certificate has private key associated and be present in the local machine store. Hence, please move the certificate from the trusted root certificate authority store to personal store.
    Best regards,
    Steven Song
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • 2032 error when connecting SQL server with Xcelsius

    Hi,
    Here are the short note about it
    1)The dashboard is directly linked to database using aspx page
    2)the data in the database refreshed using the aspx script.
    3) we have a accordion menu and a 5 levels of filter and 10 charts
    Problem Description
    receiving 2032 error when the dashboard is kept idle for 5-10 min and if i select/change any option in the accordion menu or the filter i am receiving this error
    Can anyone please help me out of this hell.

    Itu2019s a security error message.  Open your swf file and click with mouse right Button. Follow:
    Settings/ Privacy/ Advanced/ Global Security Settings Panel/ Add Location.
    Add your server address.
    After select location, click u201CCloseu201D button  and restart swf file.

  • Http Analyzer connecting to server with self-signed SSL cert

    When making webservice calls using Axis 1.3 to our development site that uses a self-signed SSL cert I am getting the following error when running the Http Analyzer:
    javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure
    Works fine if I turn off proxy in run configuration for project or when used against a site with a purchased cert. I assume the problem is with Http Analyzer not being able to find the server cert in a local keystore, is there a way to import the cert so that I can run Http Analyzer against the site?
    Tried adding server cert to <jdkhome>/jre/lib/security/cacerts keystore but still have the problem.
    Am using JDeveloper 10.1.3.
    Thanks,
    John

    I fixed that by getting certs from: https://www.startssl.com/?app=1.
    The certs are free and work fine.
    Since Iphone 4 apple does not accept unknown CA Authorities.

  • Iphone 4s does not download emails using imap when connecting to smartermail mail server

    iphone 4s does not download emails using imap when connecting to smartermail v2 mail server.
    when I search - the search results show and i can view the emails, but inbox doesnt download emails - says load more messages x read..
    the folders are displaying ok.
    Smartermail 2 is about 10 years old ( im not upgrading as its working fine other than this issue ) imap is fine with other mail clients.
    has anyone else experienced this?

    Just had the exact same issue on iOS 7, SmarterMail Enterprise 6.8
    https://discussions.apple.com/thread/5462200

  • TS3899 on my iphone it says unable to connect to server when i try to download mail.

    On my iphone it says "unable to connect to server" when i try to download mail.  same account on computer works fine

    Hello, bills47. 
    Thank you for visiting Apple Support Communities.
    I would first start with forcing the Mail App to close then attempt to access your account again. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If the issue persists, the easiest way to troubleshoot this issue would be to delete the account and add it back to the iOS device.  Below, I have included two e-mail troubleshooting articles.  The first article covers basic email troubleshooting.  The second article will assist you if the email account you are experiencing issues with is a Gmail account.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    iOS: Gmail account will not connect to Gmail server
    http://support.apple.com/kb/TS3058
    Cheers,
    Jason H.

  • Publishing error (failed to connect to server)

    Using X5, I am trying to publish to our help server (web help
    pro), but getting a message in the output window "Warining: Failed
    to publish to 'yourserver'. reason: Failed to connect to server.
    All my permissions are set up as described here:
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=rb_e01
    So... I ran a packet sniffer and then tried to publish
    again... and saw that the publisher attempts to access
    http://yourserver/robo/robo.dll?mgr=sys&cmd=svr
    When I try to access this address in a browser, I get a 401 error
    with the message below.
    +----------------------------------------------------------------------------------------- ----
    |Server: unauthorized
    |Unauthorized due to ACL on resource
    |
    |This error indicates that the credentials passed by the
    client do not have access to the particular resource on the server.
    This |resource could be either the page or file listed in the
    address line of the client, or it could be another file on the
    server that is |needed to process the file listed on the address
    line of the client.
    |
    |Please make a note of the entire address you were trying to
    access and then contact the Web server's administrator to verify
    |that you have permission to access the requested resource.
    +--------------------------------------------------------------------------------------
    However, if I try to access that address _on_ the server (
    http://localhost/....) I get some
    nice XML:
    +--------------------------------------------------------------------------
    |
    |<?xml version="1.0" ?>
    |- <mrs xmlns="
    http://www.ehelp.com/mrs/xml/serverinfo/">
    |- <head>
    | <url host="localhost" ip="127.0.0.1" version="4.00.083"
    />
    | <publish type="httppost"
    script="/robo/bin/WPSHost.dll?PUBLISH" />
    | <serverapi url="
    http://localhost/RoboAPI.asp"
    />
    | <admin url="
    http://localhost/robo/Admin/"
    />
    | <projects url="
    http://localhost/robo/Projects/"
    type="httppost" script="/robo/bin/WPSHost.dll?PUBLISH" />
    | <documents url="
    http://localhost/robo/Documents/"
    />
    | <reports url="
    http://localhost/robo/Reports/"
    />
    | </head>
    | </mrs>
    +--------------------------------------------------------------------------
    I can not seem to figure out what ACL is incorrect. I tried
    running process monitor (from winternals), and did not see anything
    helpful. The IIS www worker process seems to access all the robo
    files/registry without error.
    Has anyone else had this problem? Can I get some guidance on
    how to resolve? We are about to purchase support incidents, but the
    sooner I can resolve, the better.
    Any help appreciated. thanks,
    ajperrins

    I'm afraid I won't be of much help except to say that this is
    a classic permissions issue. I have to assume you've checked and
    double-checked the link referred to in your post (which is a good
    one).
    You might also try this technote:
    Publishing
    to RoboEngine
    In helping others troubleshoot this, it sometimes turns out
    that there are firewall issues that are not obvious especially if
    you are in a large organization crossing many domains from author
    to server. Are you the ultimate "server admin" or is there someone
    in your organization's network admnistration who could help resolve
    the permission issue?
    Sorry I can't be of immediate help.
    john

  • Hyperion Financial Reporting Studio "Failed to Connect to Server"

    One of my report developers recently got a new laptop. Since then, she hasn't been able to open an existing report or create a new one. She can log into Financial Reporting Studio, but when trying to open an existing report or create a new report, she gets the error message "Failed to Connect to Server".
    We've tested using her laptop and using mine. We are both fine on my laptop. We both have same issue on her laptop. Therefore, we don't think it's a security/credentials issue.
    We've searched help documentation and other threads in this forum but haven't been able to find what we need.
    We suspect that file(s) are missing or something wasn't configured properly during the new install. Maybe the Planning ADM Driver?? Our company's tech support hasn't been able to help. This is a new implementation, the consultants are gone, and our IT staff isn't up to speed yet.
    Can anyone offer help as to what file/configuration could be the cause and exactly how to correct?
    Thanks.

    We had the same issue after installing the Financial Reporting Studio client.
    If you run the batch script HRRunAnt.cmd in the directory C:\Hyperion\products\biplus\install\bin after installation this fixes the problem.

  • Cannot connect to server with ttisqlcs, Failed to retrieve IP address of the system

    Please help me, I installed timesten server and client on different machines in LAN, but with the same user and group - ttadmin:ttgroup
    When I tried to connect to server with ttisqlcs -connStr "DSN=sampleCS"
    The output gave me error messages as below
    connect "DSN=sampleCS";
    S1000: Failed to retrieve IP address of the system. System error: -2
    The command failed.
    Done.
    The related part in sys.ttconnect.ini is set as below
    [192.168.0.206]
    Description=TimesTen Server
    Network_Address=192.168.0.206
    TCP_PORT=53397
    And the sys.odbc.ini
    [ODBC Data Sources]
    sampleCS=TimesTen 11.2.2 Client Driver
    [sampleCS]
    TTC_SERVER=192.168.0.206
    TTC_SERVER_DSN=nredb_ds
    What does it mean by "retrieve IP" ?
    Does it try to resolve IP by the hostname even when I already gave it the ip address?
    By the way I can ping 192.168.0.206 and telnet at port 53397 with no problem.
    Please help me, thanks~

    Try changing your entries as follows and see if it fixes it:
    sys.ttconnect.ini
    [myserver]
    Description=TimesTen Server
    Network_Address=192.168.0.206
    TCP_PORT=53397
    sys.odbc.ini
    [ODBC Data Sources]
    sampleCS=TimesTen 11.2.2 Client Driver
    [sampleCS]
    TTC_SERVER=myserver
    TTC_SERVER_DSN=nredb_ds
    Chris

  • Scan to Email Error Message "cannot connect to server. check server name and address"

    I have a HP Officejet Pro 8600 Plus. 
    I've been using this printer for several months.  Now am getting an ERROR message when I try to scan to email that it "cannot connect to server. check server name and address" 
    I'm not sure how to check this.  We can all still print remotely via the internet connection. 
    Anyone have any ideas?

    Thanks for the info.,
    Did you recently change your operating system or network router that started to cause this error?
    Check out this thread - http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Configuring-quot-Scan-To-E-mail-quot-on-HP-...
    You may also need to change the printer DNS settings manually - http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-8500-Scan-to-Email-setup-cant-conne...
    Thanks

  • FRM-92050: Failed to connect to Server: /forms/lservlet-1 coming thru LBR

    Hi,
    Our EBS setup is as follows,
    R12.1.1,
    10g DB, 10.2.0.4 (patchset)
    Sun Solaris 10 64 bit
    Two node Apps Tier (AppServer1 and AppServer2) in a shared APPL_TOP.
    and Two node RAC Database Tier (DBNode1 and DBNode2)
    Highly secured and firewall environments.
    We configured EBS R12 and we were able to login and launch forms , Submit conncurrent jobs and everythings worked fine.
    http://hostname.domainname:8000
    Now , our requirement is that all the users would be accessing our EBS through https and the flow is as follows,
    Step1:
    User => https://lbrname.domainname:443
    here lbrname is our Load Balancer name. Here the request is identified as EBS request and LBR forwards that URL to our reverse proxy server
    Step2:
    Our reverse proxy server is Sun http web server 7 update 5. It converts it to http://hostname.domainname:8000 and offloads it to the apps tier.
    We followed metalink note 380489.1 - Using Load-Balancers with Oracle E-Business Suite Release 12 to configure our EBS with load balancer .
    (Section 2.1: Using Hardware Load Balancers with Single Web Entry Point).
    After configuring we are able to login to the EBS URL using https://lbrname.domainname:443.
    Now here is our problem,
    When trying to launch any form , it gives the below error.
    FRM-92050: Failed to connect to Server: /forms/lservlet-1
    not sure how to proceed. Looked at google , metalink but not getting anywhere.
    Can you please give some pointers as how to solve this problem ?
    Thanks,
    Sasi

    Hi Helios,
    Thank you very much for your time.
    Metalink ID 438522.1 & 367614.1 doesnt apply to our environment.
    I had looked at 470890.1 and it looked like we are ok but I'm going to double check on that.
    FRM-92050: Failed to connect to Server: /forms/lservlet:-1 http://ID 470890.1
    On the laodbalancer (Big IP) i need to check with our network team.
    FRM-92050: Failed To Connect To Server: /forms/lservlet:-1 http://ID 793409.1
    Thanks again.
    Sasi

  • I know this is old now but since the update i can't get into icloud on my phone it keeps asking me to check t & c's and now no emails. Can't connect to server. I have 4S please help :-(

    I know this is old now but since the update i can't get into icloud on my phone it keeps asking me to check t & c's and now no emails. Can't connect to server. I have 4S please help :-(

    Hi Kellyssi,
    Thanks for visiting Apple Support Communities.
    If you're being asked repeatedly to check terms and conditions, try restarting and then resetting your iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    All the best,
    Jeremy

  • Failed to connect to server "%MACHINENAME%

    Hi;
    I have problem with opening report with crystal report 2013 EOM ,  i got this strange exception  I have google it and didnt find any helpful data
    "Failed to connect to server "%MACHINENAME%".Error returned from Windows Sockets API getaddrinfo: 11001."
    i am using this code
    tempFilePath += "Evaluators Trend.rpt";
                ReportClientDocumentClass crystalReport = new ReportClientDocumentClass();
                object path = (object)tempFilePath;
                crystalReport.Open(ref path, 0);
    can you please  advice how can i avoid this issue .
    Thanks ,
    Fade Ismaeel

    Hi,
    Could you try below code and see if you face the same issue?
    CrystalDecisions.CrystalReports.Engine.ReportDocument rd = new  CrystalDecisions.CrystalReports.Engine.ReportDocument();
    CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument boReportClientDocument;
    boReportClientDocument= new CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument();
    boReportClientDocument.ReportAppServer = System.Environment.MachineName;
    object path= @"C:\Reports\World Sales Report.rpt";
    boReportClientDocument.Open(ref path, 0);
    CrystalReportViewer1.ReportSource= boReportClientDocument;
    You would need to set the RAS server which will be processing your request. Above code works when executed on the same machine as CRSE is installed. You could also use the IP address of the machine (instead of "System.Environment.MachineName") where the RAS is installed.
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

Maybe you are looking for