IPhone 5 flash on camera stopped working when taking photos & poor quality photos

iPhone 5 camera flash  stopped  working when taking  photos and poor Quality photos . Flash still works when in torch mode .

Hey there Jimbo,
It sounds like your flash has stopped working on your phone and you noticed a decrease in image quality.
I recommend a few troubleshooting steps here. Start with closing the running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test it again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
All the very best,
Sterling

Similar Messages

  • Iphone 6 always hangs/stops working when i turn on my cellular data. i have already switched my sim card. It works perfectly on wifi

    iphone 6 always hangs/stops working when i turn on my cellular data. i have already switched my sim card. It works perfectly on wifi

    Which of the basic troubleshooting steps described in the User Guide - restart, reset, restore - did you try before posting?

  • I get a message that itunes has stopped working when I try to sync photos

    I get a message that itunes has stopped working when I try to sync photos. Error message says "APPCRASH ..."
    Can anyone help? Thanks.

    I found the file but when I added it to the  list for the Data  Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

  • IPhone 5 data network stops working when using GPS

    Hello,
    I have a strange problem for some time now. The DATA connection in GPS apps stop working when navigating. When I use Google maps or WAZE apps the first time after rebooting the device, everything is working just fine for first address search, but after beginning the navigation, DATA network disappears only for the navigation app, browsing is working just fine (a bit slowly, but fine).
    Tried to factory reset the device few times, and changed the carrier provider, didn't help
    Any ideas??? 

    Hi liokap,
    Welcome to the Apple Support Communities!
    I know that it can be frustrating when applications you downloaded from the App Store do not function as expected. In this situation, I would recommend working through the troubleshooting steps in the attached article.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Have a great day,
    Joe 

  • Elements 10 stops working when I try to save photos to a memory card. I was successful 1X, failed3X

    Succeeded oncesaving photos to a memory card, but 3times, Elements 10 stopped working when I tied to save.  What's up?

    I had the same problem with Photomerge panorama (PS Elements 9) on my new Windows 8.1 HP laptop.
    I found a post over on a thread about CS5 talking about dual video graphics drivers. My laptop has both Intel and Nvidia chips and drivers, and after I disabled the Nvidia driver in Windows Device Manager, so that I use only the native Intel graphics, Photomerge Panorama comes up fine. My external big monitor looks crisper with the Nvidia graphics enabled, but I can re-enable that easily after I am done with Photomerge.

  • Why does flash player immediately stop working when i open my browser?

    Hello,
    I tell you i really hope someone can help me, because im seriously getting fed up. Im running on Windows 8 OS and using an updated version of firefox with flash player version 11.8. Recently i had to replace my harddrive for my laptop and ever since relplaceing and even a little before i have been haveing major problems while playing video in firefox. Upon loading firefox, flash player stops working and immediately gives an error message, slowing the loading process considerably. Furthermore, while watching live video feeds, the video freezes constantly and even knocks me off my internet connection to where i have to run a  troubleshooter to get back online. I have tried everything and still cannot fix this issue. Please help me. If you have any idea at all please reply here or you can even contact me by email: [email protected] Im desperate because i use this laptop to watch video of my classes. Thank you.
    Peter Thebeau

    My WIn7 machine did this all the time on YouTube. I uninstalled BOTH Flash Player and Shockwave. Then I reinstalled Shockwave first, followed by Flash Player. I haven't seen a crash since.

  • LR3 64 bit stops working when I try to import photos

    I recently installed, uninstalled and re-installed LR3 and in my opinion it SUCKS! Every time I try to import photos the program stalls and quits responding. It eventually (after several minutes) gives me a message that "Lightroom has stopped working and will close." When I installed it, I created a new catalog and did NOT upgrade my existing LR2 catalogs so there shouldn't be any cross contamination with older file metadata as suggested in other posts. Has anyone else experienced this problem? My OS: Windows Vista 64-bit, 8GB RAM. I didn't have any problems with LR2, nor do I recall this being a problem with LR3-beta. Needless to say....I am NOT happy at the moment!!!!

    I had this problem with LR2, seemed to work Ok but when I was downloading Photos it would crash, ended up being a bad MB for me and this happened to me a second time as well and found out the processor wasn't Seated correctly, it was heating up, re-seated it an NP since!
    I'm not a Geek and know very little about this stuff, the first time I had a problem with this I took my puter to the local Micro-Center store, my brother builds, upgrades my puters for me and the parts came from Micro-Center, they diagnosed the Bad MB (Gigabyte) and replaced it for free and my brother spotted the heating problem with the MB! I think in this incident I got a bigger power supply and new fan?
    Don't know if this is your problem or not? Just trying to help, I had no other problems except for when downloading Photo's, does this take extra processing power?

  • Video camera stopped working for ALL apps (Facetime, Skype, Photo Booth, etc)

    I have a mid 2011 Air.  This happened prior to my OS X 10.8.5 upgrade.  Anyone else having this problem?  I see that there are threads where people had the problem AFTER the OS upgrade, and it only affects Skype. 

    You're welcome, s_b
    snow_bunny wrote:...I have updated the mid 2013 Air Apple fix...
    As you can see from macbookair Technical Specifications, there are many different models of MBAs.
    Your "mid 2011 Air" does not need the "mid 2013 Air" fix.  Only a "mid  2013 Air" running OS X 10.8.5 needs that workaround.
    snow_bunny wrote:...Still not working.  I have verified that I do not see a camera under my USB tree in  System Information... I have reset my SMC twice.  The camera was working fine up to just maybe that week of the OS X 10.8.5 update earlier in September.  Any other ideas?
    With all you have tried, there is still something wrong with your MBA's software or hardware.  Here's how I would proceed.
    Use the Disk Utility in OS X Recovery (not your normal startup disk's Disk Utility) to repair your disk (not disk permissions).
    If Disk Repair does not immediately return proper camera function, use the OS X Recovery System to reinstall your Mac OS X.
    You can use the troubleshooting techniques from http://support.apple.com/kb/ HT2090 to determine proper camera function.
    If your System Information utility still does not recognize your camera as a USB device after the repair/reinstall, contact Apple or an Apple-Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.8.5

  • My new 4GS is taking really poor quality photos, how can I improve them?

    I'm trying out the camera on my new 4S and am shocked at the poor quality. I've taken the same photo in the same light etc with my 3GS and the image is much better, I can see more detail and the texture is smoother. My 4S images look terrible!
    Has anyone else noticed this? Is there a way to alter the settings? Thanks in advance.

    Hi there, i am an iphoneographer from OZ, and i am having the same issue, i have switched from iphone 4 which was upgraded to IOS5 to the 4s with the IOS 5. Since owning the 4s i have had nothing but noisey pictures in low lighting conditions, including cloudy days night time occasions indoors ect, even when using flash.
    I have used different apps, including the standard apple cam, king camera, Pro cam, Focus Plus, and the quality is all the same with the noise, but yet when i take the same pictures with the iphone 4 (which my other half has now) in the same lighting they are fantastic quality. I'm not clear here what the issue is as being an iphoneographer/Photgrapher i though i knew a fair bit about the iphone but this has really stumped me and left me no choice to send out a call for help and ask if other people out there are in the same boat, and have any advice on what possibilities could help fix this, as i miss the quailty on my iphone and dont want to have to swap back to it. Cheers LJ

  • IPhone 4s back camera not working even after buying new iphone 4s

    Back when the ios 6 updates were coming out  in 2013 my iPhone 4 back camera stopped working, after trying way too many ways to reset the phone  and  finding others with this same issue I decided to start over I bought a new iPhone 4s so this one was better and 32gb instead of 16gb and it was 9 days later the back camera stopped working on my NEW iphone and still doesn't work to this day? What on earth should I do? How can this be fixed? I've tried hard reset, backing up the new phone, all the tricks I've tried on both phones do not work!!

    A new phone has a warranty.  So take it to an Apple store.  If they can't fix it, they will replace the phone.  Or do you mean: it stopped working after 9 days, but then you waited until the warranty ran out and then ask us?

  • Camera stopped working

    i just got my new 6350 in april. in may it was dropped in water the phone works fine, but my camera stopped working. when i push the camera button or manually go into my stuff and go to camera it just goes to a black sceen then to a blue one and says camera on standby. it won't record video either, but i can still record voice on it. anything i can do to fix it??? i know stop dropping phones in water!!!!! thanks

    "anything i can do to fix it??? i know stop dropping phones in water!!!!! thanks"
    buy a new one and stop dropping phones in water
    If you want to thank someone, just click on the blue star at the bottom of their post

  • I have iPhone 5S after updating to IOS 7.1.1 my camera stopped working!!!!

    After updating to IPS 7.1.1 my camera stopped working, it's just a black screen.

    Hello Darth Evans,
    The troubleshooting steps below can help get your iPhone's camera working again.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    Hi there Fgonzalez2015,
    You may find the camera troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • My iPhone's speaker next to the frontal camera stopped working what can I do?

    So since today my frontal speaker next to the frontal camera stopped working and I've been having problems where when I open the camera it reboots I just haven't had time to restore to fix the corrupted file could this be responsible for my speaker not working? I have to use the loud speaker to make a phone call or I won't hear anything if I don't restore will this cause permanent damage to my phone? Plead help! Thanks!

        Hello tmsipos11! That certainly sounds like an aggravating thing to occur! At this point, I recommend making sure that your iPhone 4s has the most recent software. The next upgrade is available now! If you've done so and yet still have this problem, please let me know!
    Dion M.
    VZW Support
    Follow us on Twitter www.twitter.com/vzwsupport

  • Help, when i click device (iphone 4) on itunes stops working

    Since i updated to last itunes version when i click on device (iphone 4) itunes stops working and it get closed
    it only happens when i click on device
    i use windows 7, itunes 11.1.3.8 and iphone 4 ios 7.0.6

    Hello edurcluet,
    I found an article with steps you can take if iTunes stops working when you connect your iPhone:
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/TS3219
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • USB adapter for docking port Screen hp split x2

    Hi! I would like to know if there is a USB adapter to connect to the expansion port on the bottom of the screen Hp Split x2 m121sa. The USB adapter for HP Elite h n46aa pad is compatible with my HP Split x ? I thank

  • Best way to Export HD footage for SD DVD

    Hi all, I have a Sony HDV-HC7 camera and record everything in HD. I've captured the footage into final cut pro as HDV - 1080i60, then did some editing on the time line. Then, I went to File + Export + QuickTime Movie... This is where I'm lost. What s

  • Cannot find iMac after updating to 10.4.5

    Have a home network with 1 iMac (10.4.5) and 2 Windows XP machines. I had all of them communicating just fine. After updating to 10.4.5 on the iMac, the iMac can still see and access files on both of the PC machines. The PC's can both see and communi

  • Toshiba A105 wont boot, blinking lights.

    My friends toshiba A105 wont boot, it has no display, fans dont even spin up, power button does nothing. All it does is the battery and AC lights blink green every couple seconds when it's plugged into AC. tried it with the battery out too. Any idea

  • "Video bit rate too high" error

    When Building my DVD SP project, the compiler throws the above error when muxing one of the tracks (three previous tracks are compiled OK). Encode Mode is "One pass VBR", motion estimation is "good" and Encoding mode is "encode on build". I have chan