Iphone 5 froxen on home screen, wont let me swipe.  tried home and sleep/wake botton to no avail still locked.  went to restore using itunes but dont want to loose photos on phone.  can anyone suggest a way to get photos before i restore

iphone 5 frozen on home screen, wont let me swipe.  tried home and sleep/wake botton to no avail still locked.  went to restore using itunes but dont want to loose photos on phone.  can anyone suggest a way to get photos before i restore

try moisturising your finger a bit if the skin is too dry it can give problems

Similar Messages

  • My ipod touch screen has gone white with bright white spots, I have restored it but it is still white.  It shows in ITunes but I cant do anything with it.  Can anyone help please

    My Ipod touch screen has gone white with bright white spots on it.  I have restored it and it shows in ITunes but the screen is still white.  Is there anything I can do? The warranty has run out so I will have to pay for any repairs (if it can be repaired).  Any help would be much appreciated.  Thank you in advance.

    If you still have problems after restoring the iPod to factory defaults/new iPod then you very likely have a hardware problem.  I would make an appointment at the Genius Bar of an Apple store.

  • Probably asked and answered a million times but my laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his! Is there a way to get them off and how do i prevent this from happening again?

    probably asked and answered a million times but laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his? Is there a way to get them off without deleting each one? Also how do i prevent this from happening again? can someone direct me to some info on multiple phones on one itunes i am lost.

    Hey there 79usma79!
    I have a couple of articles for you that can help you troubleshoot the issues you are seeing with iTunes on Windows XP. The first is a general troubleshooting article, which can be found right here:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1421
    This article can help you find out if there are any conflicts between your copy of Windows XP and iTunes, and can tell you what to do if there are. Before going down the troubleshooting route though, you should take a look at this article, which can help you back up your entire iTunes library to an external hard drive, so if this issue is recurring, you will be able to restore from that backup and will not have to worry about losing your playlists or music again:
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/HT1751
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I was given a replacement and told to set it up on itunes but now I cannot retrieve my address book, can anyone help please?

    I was given a replacement and told to set it up on itunes but now I cannot retrieve my address book, can anyone help please?

    a message appears saying that there is a problem with the windows installer.
    What's the precise text of the message please? (There's a few different ones I can think of that you might be getting.)

  • How can i get rid of music or videos that i purchased from iTunes but dont want anymore. When i delete them they always come back in my downloads available?

    How can i get rid of music or videos that i purchased from iTunes but dont want anymore. When i delete them they always come back in my downloads available?

    thanks. somehow after restoring it, ipod on my phone had another option to download them onto my phone (even though they would play so no idea) but then it allowed me to swipe the songs to delete them so they are finally gone from my phone!!!

  • Working in Indesign CC, danish. But i want to change it to english, can anyone help me?

    Working in Indesign CC, danish. But i want to change it to english, can anyone help me?

    You can uninstall the danish version, open the CC desktop app and change the language preference to English, then download the English version.

  • My mail application was working fine, I shut down and when I restarted it is asking me to set it up again. I dont want to loose any information on my mail and I had a lot of accounts on it. . what can I do?

    My mail application was working fine, I shut down and when I restarted it is asking me to set it up again. I dont want to loose any information on my mail and I had a lot of accounts on it. . what can I do?

    I found all my files from my old account in the users folder but when I logged out there was no option to sign in on the old account, I'm guessing ill just have to start from scratch, which is fine as long as my old files aren't lost :) thanks for the help.
    I'll explore more once I get my screen fixed and there might be a way to recover my old account :)

  • My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Can anyone suggest a way to compress slide shows done in iPhoto

    I have a slide show that about 49 megs and would like to email it...have never dome compression so looking for advice that allows me to send across platforms..thanks in advance

    Forget about emailing a slideshow. To get one to a size less than 5 or so MB you will end up with an image about the size of a postage stamp. Slideshows are just not suitable for emailing.
    Alternatives: Upload the file somewhere and send a link to the person you want to see it. This can include video sharing sites like vimeo or youtube, or file sending sits like YouSendIt or MegaUpload
    Regards
    TD

  • Can anyone suggest a way to delete a partner in a contract

    We are using BAPI_CUSTOMERCONTRACT_CHANGE to delete a partner say 'WE'. But it is deleting partner 'AW' also though we are passing only WE for deletion. This is being done internally by BAPI it seems.
    Is there any other FM or BAPI which we can use to delete a partner from contract (va42).

    Change Customer Contract
    Functionality
    Using this method, you can change or delete contracts.
    You can change header data, item data, schedule line data, contract data and configuration data.
    In general the following applies:
    1. Only enter fields that you want to change.
    2. Mark the fields you want to change with an X.
    3. Fill in the UPDATEFLAG field with a U.
    4. Always enter the key fields when making changes, including in the checkbox list.
    5. An exception is configuration. If you change this, you must fill it in completely.
    6. Enter quantities and dates under schedule line data.
    7. Possible update flags: U = change
                            D = delete
                            I = insert
    Example
    1. Delete complete contract
    2. Delete contract item
    3. Changes to contract
    4. Change configuration
    i dont how u are calling this FM.
    Regards
    Prabhu

  • My iphone 3gs is stuck in recovery mode. i have tried to restore using itunes but it ends with a message saying there was an error and couldnt be restored

    hi  desperately need help. my iphone 3gs is stuck in recovery mode... when i try and do the restore via itunes it goes through the motions but when it gets to the end it tells me there was an error and it couldnt be restored...  originally it was an ex contract phone that i had opened to orange from vodafone.. it was fine until i tried to do the ios 6 update

    There is a way to get it recovered from the so called DFU mode. Try to restart the phone while holding the home and power button at the same time. Then try to connect it to iTunes and do the same again. If you try that again till it works you should be able to use your iPhone as before.

  • Locked out of my ipad plese help dont want to loose any files on it (he can destroy a anvil with a 16oz.hammer

    Someone please help the kid locked me outa my new ipad and says cant remember the numbers i cant lose any files nd no longer have computer that set it up help me (did i mention he can destroy a anvil with a 16oz.hammer)

    Use a friend's computer.
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My ipod Classic hangs and freezes on the apple screen.  It will not do anything.  I tried to restore using iTunes, but came out 1415 error code, and cannot do anything about it.

    My iPod Classic which I rarely uses.  I try to refresh it and put new song into it.
    As I try with iTunes, it runs very slow and show that it had problem, need to restore it.
    When I tried, it will not and hangs, also slows my HP Win 7 system immensly.
    I tried to reset, pressing the middle and menu botton, now it hangs on the apple screen and remains there forever.
    What is the problem and how can I solve it?

    The screen is telling you to connect the iPod to your computer and restore via iTunes.
    iTunes: Backing up, updating, and restoring iOS software

  • HT1212 i have an ipad that has a password on it and i dont remember my password i tried to restore it using itunes but its telling me that i need the password is there another way to go about this?

    im trying to unlock a friends ipad for her because her step daughter doesnt want to give the password to her how do i go about in restoring it without using the password in order for me to do the process

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I moved my iphone from my parents account to another account on a different computer and i still have some of the music that i dont want from the other account, how can i get it off of my phone without deleting it from the other itunes account?

    Please Help

    What type of "account" are you referring to?  An iCloud account doesn't contain music, an iTunes account does.

Maybe you are looking for

  • Problem with MonitorStart looking for specific CORRELATION

    The help file for OO40 uder the topic "Monitoring Messages" says that "Messages can be monitored based on consumer name, message Id, or correlation". How do I monitor based on correlation? I tried fiddling with the aqmsg.correlate property along with

  • Using javax.imageio in JSP

    Hi I have a simple code snippet that I use to read in JPG/GIF image from a file and create a new image that is upside down . Here is my snippet. //create upside down image try {  String imgPath = "\\images\\AINCC.gif"; File fImg = new File(imgPath);

  • OWB 9.2.0.2.8 Installation Fails -

    Hello Gurus, On clicking the INSTALL button, I get an error window asking me to either stop installation of one or all products. On checking the log file, I found the errors below:What should I do. I am installing in Windows XP and Oracle 9.2.0.4 dat

  • Adobe Creative Suite 3 Design Standard for Windows registration?

    Hello all, I purchased a copy of adobe creative suite 3 design standard for windows at a garage sale. I tried registering the product, but it has already been registered. Is there anything I can do? Thanks

  • JTable Sorting Columns???

    I have Table with 5 columns and say 3 rows. I want to sort the first column.Let us say values in the first column are..CDF, MPC and ABC. so when i click on the column header now the values should be ABC, CDF and MPC..If i click on it again it should