IPhone 5 has failed to connect to my home Wi-Fi

my iPhone 5 has failed to connect to my home Wi-Fi and its seems am the only one experiencing this problem at home because my housemates iPhone 4 and Blackberrys get the wifi nice and clear. yet i have connected to this wifi with iphone5 before.

Try resetting your wireless router and modem.
Disconnect the wireless router from the power source followed by disconnecting the modem from the power source. Wait 5 minutes followed by reconnecting the modem to the power source and allowing the modem to completely reset before re-connecting the wireless router to the power source and allowing the router to completely reset with the modem.

Similar Messages

  • The latest update of my IPhone 3GS has failed, now i can't use the phone. Please help.

    The latest update of my IPhone 3GS has failed, now i can't use the phone. I have tried to restore but i get a message saying 'Iphone could not be restored. An unknown error occured(6). I am running the latest version of itunes (10.4) Please help.

    Place your iPhone in manual recovery mode or DFU mode.
    1. Connect your iPhone
    2. Open iTunes
    3. Hold down the home and power button for 8 seconds. After 8 sec, let go of the power but still hold down the home button until iTunes recognize your phone in recovery mode

  • Addon has failed to connect to the DI API. Service Not found

    Hi
    I've upgraded database B1 8.8 SP0 PL11 to B1 8.8 SP0 PL15.
    Addon was complied on B1 8.8. SP0 PL11 envrionment.
    I've error message when I started addon.
    Addon_Name addon has failed to connect to the DI API.
    Error Details:
    Service not found.
    DI API was uninstalled and re installed.
    And I deleted SM_OBS_DLL directory.
    But I can not resolve this issue.
    Please help me,
    Joanne

    Hi Joanne,
    I had exactly the same problem with patch 15 after an upgrade from 8.8 patch 13. The SBO client didn't automatically update so I had to use Add/Remove programs to remove the old client and DI API and then the new client install failed from the B1_SHR folder with a 1158 error (no description).
    What I did to correct it was install the DI API from the <servername>\B1_SHR\B1DIAPI folder and then run the client install afterwards. This time the client install worked fine and I can run addons that use the DI API. I think there was some registry entry issues, maybe with the upgrader or the client installer.
    Kind Regards,
    Owen

  • My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on.

    My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on again. Has anyone else experienced this problem and if so, is there an easy fix. I have been advised by Apple that the latest IOS update may overcome this situation but I'm only on slow download speeds and 690 Mb would take forever. I would appreciate any advice.
    Best regards,
    Rob.

    PinguXeF wrote:
    , while I have taken a backup of the iTunes Library,
    this means nothing if it was not done correctly...
    To have  EVERYTHING on a New Computer...
    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751

  • I can not open any pdf file... . Fatal error. Acrobat has failed to connect a DDE server

    fatal error
    Acrobat has failed to connect a DDE server....
    What can I do?

    Did you register and activate Acrobat? I don't remember the DDE issue off hand, but it should not be occurring with the regular Acrobat installation.

  • TS3274 Every time I try to play Amazon video on iPad, it shows "our Internet connection is currently using an HTTP proxy, content playbacks not supported when a proxy is configured". Though I can play it on iPhone which has same Internet connection. Plz h

    Every time I try to play Amazon video on iPad, it shows "our Internet connection is currently using an HTTP proxy, content playbacks not supported when a proxy is configured". Though I can play it on iPhone which has same Internet connection.
    Can any one please help?

    This helped me
    http://mashtips.com/amazon-instant-video-http-proxy-error-on-ipad/

  • HT1976 iPhone 5 has suddenly stopped connecting to the internet away from home

    My iPhone 5 has suddenly stopped connecting to the internet when away from home. It was fine last Wednesday, then on Thursday all I got was 'Safari is no longer connected to the internet'. I cannot use the Messaging, Find my Friends etc.
    As far as I know I have not done anything to alter any settings, but I did change my password on Wednesday - which works, so I think that's OK.
    Has anyone any idea what is happening?
    ictoau

    Hello, ictoau. 
    Thank you for the question.  You may find this article helpful in troubleshooting the carrier data connection issue you are experiencing. 
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    Jason H. 

  • My iPhone 5 will not automatically connect to my home wifi

    My wifes iPhone 5 will not automatically connect to our home wifi, she has to log in each time (she has ios 6.1.4).  Mine, however will connect automatically with no issues (we have same phone and ios).  Here is what I have done so far to fix the issue and none have worked:
    * I have reboted (hold home button and sleep/wake button)
    * I have reset the network connections
    * I have turned "ask to join" on, connected to the network, turned wifi off and then back on, it did not connect to the wifi
    * I have manually connected to the network through the manual option, turned wifi off and then back on, it did not connect to the wifi
    * I have erased all content and data and resored the backup from iTunes
    * I have restored iPhone from iTunes and restored the backup from iTunes
    My phone does not list a "forget this network" as an option on the wifi connection when I pull it up, so this is not an option.  So, what else is there to fix the issue?

    Hi there Huskerscott!
    I have some information here that can help you troubleshoot this issue:
    Unable to automatically connect to Wi-Fi
    Avoid giving your Wi-Fi network a common name.
    Some wireless routers are preconfigured with a common SSID (network name) such as "wireless" or "default."
    If your desired Wi-Fi network has a common SSID, try changing the SSID to something unique2.
    If your desired Wi-Fi network has a unique SSID, reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
    Which is taken from this article:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    It also may be helpful to follow these settings, which are optimal for use with iOS and OS X devices:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • TS1398 After updating to ios 6 my iphone 4 would no longer connect to my home wifi. At work we have a free wifi connection that does not require a password. However my wifi at home is password protected. I have the right password. It works on my ipod touc

    After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!

    I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
         One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
         to do this on a motorola router: type 192.168.0.1 in your address bar.
    username: admin and password:motorola if you have not changed the factory defaults.
    Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
    The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
    There is a fair bit of buzz about this issue out there, some other things I've seen:
    This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
    Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
    IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
    Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
    Good luck, more to come if I figure out anything else, and please post any solutions you may find.

  • TS1398 My new Iphone 5 is in wi-fi mode but not connecting to my home network.I am certain that it is not my router since my wifes new Iphone 5 has no problem connecting.I dont get to the point of entering my password as a pop up tells me "uable to join..

    My new IPhone 5 does not pick up my home network.My wife's new Iphone 5 has no such issue.I get a message "unable to connect' although the correct network appears.Never get to the prompt screen asking for my network password.Keeps trying to connect but never does.Have switched on /off button and turnesd off phone back on several times.

    Settings > General > Reset > Reset Network Settings
    Power cycle the router.

  • Conenction has failed when connecting to db for creating new Repository

    Hi,
    I have installed OBIEE on my local machine and also installed the admin client tool. I have a local database and have copied the TNSNAMES in specidied OBIEE folders and also configured user.cmd to put the tns file path. But I still keep on getting connection has failed error.
    Please help!!

    refer these for any mistakes you did...try one more time after restaring services.
    http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
    OBIEE 11g - Connection has failed

  • My iPhone 5 has lost all connections to 3G and phone signal

    For the past 2 weeks my iPhone 5 says searching in the top left corner of the screen. It will connect to wifi but not 3G or my EE phone network. There are currently no appointments available at the Genius Bar local to me. Has anyone experienced the same issue with their phone?

    Hey Greene198,
    If you haven't already, I would start off your troubleshooting by following the steps in this document:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • Ping DB has failed and DB Permissions has failed, cannot connect to DB??

    Hello all,
    I am trying to install fatwire on my Windows 7 platform and after successfully installing my Oracle Server, my Weblogic server, and successfully deploying my CS application, I keep getting the following error during Test CS Configuration:
    The status is as follows:
    HelloCS is successful.
    Ping DB has failed.
    DB Permissions has failed.
    Please check the C:/dev/fatwire/futuretense.txt for details.
    Once I do that, I find the following stack
    [2012-05-24 15:27:14.978][CS][ERROR] Exception processing CatalogManager request
    java.lang.Exception: Unknown cmdstr
         at COM.FutureTense.Common.R.execute(y:1706)
         at COM.FutureTense.Servlet.FTServlet.execute(y:1088)
         at COM.FutureTense.Servlet.FTServlet.doPost(y:3299)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:751)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:844)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:242)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:216)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:132)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:352)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:74)
         at com.fatwire.cs.core.logging.context.filter.ContextHeaderFilter.doFilterWork(y:526)
         at com.fatwire.cs.core.logging.context.filter.RunOncePerRequestFilter.doFilter(y:2152)
         at com.fatwire.cs.core.logging.context.filter.HttpFilter.doFilter(y:1020)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:74)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3288)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3254)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
         at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2163)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2089)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2074)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1512)
         at weblogic.servlet.provider.ContainerSupportProviderImpl$WlsRequestExecutor.run(ContainerSupportProviderImpl.java:254)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Any ideas? Thanks

    So, I would expect that the error lies in the configuration of Sites to the db or with WLS's data source. I haven't run through a WLS install yet, so I don't know the specifics, but those are the installation steps that I would re-walk through to make sure I didn't miss any steps.
    the com.fatwire.logging.cs.db log can be found in the log4j.properties file. I believe that's the name. I don't have an instance open right now to double check, but take a look through this forum https://groups.google.com/forum/#!forum/webcentersites there were some other threads about using that trace.
    Let us know if you get it going!
    -ryan

  • IPhone 5 has difficulties to connect by WLAN although the net is recognized., iPhone 5 has difficulties to connect by WLAN although the net is recognized.

    iPhone 5 is unable to connect to wifi although Net wasi found.
    The Same problem exists at Bluetooth
    It Seems to be a Software failure. Does anybody know something about?
    BR
    Bernd

    Look to the right under "more like this", theres plenty about this.

  • I updated my iphone and now I cant connect to my home wifi

    Ive updated my iphone 4s to the new software and now I can no longer connect to my home wifi

    Hello there indianafran,
    Thank you for using Apple Support Communities!
    I recommend these troublehshooting steps from the article named iOS: Troubleshooting Wi-Fi networks and connections found here http://support.apple.com/kb/TS1398:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If that does not fix the issue then these steps near the bottom of the article is where I would go next:
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    All the very best,
    Sterling

Maybe you are looking for

  • I can't update my iPhone 4 to IOS 5.1.1

    I tried updating my iPhone 4 to IOS 5.1.1 but everyime I download the software on my phone it fails. So after a few more attempts ( with and without Wifi) I decided to try it on my computer. That also failed. It reccomened I restore to my default set

  • Group By with nested calculations

    Hi Gurus, I have an Acct table with the follwig fields Bal_date Bal_amt Acc_No I want to calculate the average balance based on this formula: Average=Amount * no_of_days/no_of_days_in_month Where amount= Bal_amt (i.e. daily balance) no_of_days = numb

  • Stock transfer using movtyp 541 an 542

    Hi, Stock is to be  transfered  from one storage  to vendor using movtype 541 and 542. After using  541 stock is kept in transit using 541  and normally the system should generate automatically a Movement Type 542 to move the stock to vendor. .. But

  • Draw Live in Symmetry with Reflect Effect

    There was a thread on the MAC forum July of last year (http://www.adobeforums.com/webx/.59b5e982)about drawing in symmetry using the reflect effect set to a copy of -1- in the dialog box. I am unable to draw with this LIVE. I can only apply the effec

  • My phone keeps saying "cannot connect to the store. A secure connection could not be established.

    My I phone keeps repeatedly coming up with: Cannot connect to the store. A secure connection could not be established. Please check your Date & Time settings" What does this mean and how do I fix this as I am trying to update my apps and they have st