Iphone 5 in 2013 CR-V

I was able to control the IPHONE 5 through the USB. After the last update the bluetooth call receiving was repaired but now when I plug in the USB it says incompatible. How can I fix this? Thanks
2013 CR-V AWD w/NAVI

This issue is discussed a few other times in the forum under different categories.  It is a known issue for CRV's (see Honda website) and only on incoming calls.  Phone must be unlocked AND the headset setting must be selected - otherwise you have to "transfer" the call 2x.

Similar Messages

  • I restored my data on my iphone 5s to 2013 in error - how do I retrieve all recent photos etc

    I restored my data on my iphone 5s to 2013 in error - how do I retrieve all recent photos etc

    Restore the phone using a current backup.

  • Calendar times do not match between iPhone and Outlook 2013

    I have Outlook 2013 sycing with iCloud (poorly but it works).
    There is a time zone issue between these two programs.  I live in Saskatchewan (-6) where we don't have daylight savings time.  I have Time Zone Support turned off on my phone, and the time zone is automatically being detected.
    My computer is set to Saskatchewan (-6) and if I create an event on my iPhone 5 at 9am, it will sync to my Outlook calendar for 8am in the Central Standard Time Zone instead of the Sask Time Zone.  So I change it to Sask in Outlook and it now shows up in Outlook at 9am, but it is on my phone for 10am.  I believe there is an issue where iCloud is sending the wrong time zone information to Outlook.  I have read in other forums that everything works fine between the months of November and March, so it is definitely a time zone issue.
    Hope this gets fixed.

    Apple puts Saskatchewan into Central Standard Time, which isn't correct.  Then when it syncs to Outlook, Outlook puts the appointment into the CST time zone, instead of the Saskatchewan -6 time zone.  The problem is Apple's iCloud sending the wrong information to Outlook.
    Need a fix for this please.

  • How can I export contacts from iphone to Outlook 2013?

    I am trying to export my contact on my iphone to MS Outlook 2013.  Cannot seem to find anything about this for Office 2013.

    iPhone PC Suite should do the job.

  • Can i get imovie free bought iphone in feb 2013?

    I got my iphone5 (which is always updated with the newest software) in February 2013 and i really want imovie. My friends all bought it free.
    i found out that devices purchased after September 2013 were able to buy iwork aand ilife apps for free. One of my friends however purchased his iphone 4 in june 2013 and still got the apps free? is there anyway i can buy imovie for free?
    Thank you.

    no you ca nt get that app for free they must have jail braked their device which is not recommended.

  • Connecting iPhone 4s to 2013 Camry

    Are there several different ways to connect my iPhone 4s to my 2013 Camry?
    I look online and I see several ways that people start the process using the car:"radio"
    One shows
    Hit Setup Button>Bluetooth>Add new device   Then pair Carmultimedia
    My sales man said
    Hit Phone button first then add phone then pair phone with carmultimedia
    Online I have also seen several other variations.
    So my question is does it matter if one starts with  the "set up" button or starts with the "phone" button on the camry?
    Do you wind up adding the device either way you do it?

    I think the issue I’m confused is where do you start with the Car radio buttons.
    Some things I read and see (videos) show starting with the set up button on the Toyota radio. Others show starting with the phone button on the Toyota radio. None show that one has to use both.
    Example an online video shows
    Pressing the set up button on the Toyota radio> Pressing the Bluetooth on the scree> press add new device
    Then pair the CarMultiMedia  on your phone
    My salesman says to
    Press the phone button on the Toyota radio. The screen comes up says no phone, do you want to add? Then press yes, then when the CARMULTIMEDIA pops up on the care radio screen, on your iPhone press the CARMULTIMEDIA button to pair
    The main sticking point I have is do you start off with the setup button on the radio or the phone button (Or do both actually lead to set up, just a different set of steps?

  • TS2776 iPhone 5, Outlook 2013, Windows 7.0 64-bit.  Every time I connect my phone to my computer via USB, iTunes opens with the "accept our terms and service" then deselects the boxes checked under the INFO tab to sync my calendars, contacts...help?

    I am connecting my iPhone 5 to my Windows computer via USB.  This should open iTunes and start the sync process.  Instead of iTunes opening, I get the iTunes service agreement to which I must agree.  Then iTunes opens and begins to back up my phone.  It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected.  Hence the computer and the phone are not sharing information.  When I select the functions I want to sync, I must either replace or merge.  If I replace, I lose the information I recently put into my phone.  If I choose to merge, then I have duplicates of everything.
    How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
    I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
    Thanks for any help!
    Christine

    After you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
    java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
    I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
    I've found that this fails with the error;
    INFO: This tool works only on Windows Platform. Exiting the program
    Which is strange considering this is Windows Server 2008 R2 64-bit
    DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue

  • Iphone 6 + Macbook 2013 Bluetooth not linking up

    I have them on the same network, they're both wireless.
    I have tried to pair them but it fails every time, it pairs successfully then disconnects immediately after being paired and it will not connect again unless I forget device but it goes through the same loop as above and never stays connected to each other.
    After it disconnects I have tried double clicking my iPhone 6 listing in my Macbook Bluetooth settings and the following message pops up: Network is Disabled. Make sure network access is enabled'.
    In my iPhone 6 Bluetooth settings it shows two listings of my Macbook Pro (only one of those can I forget the other is always there without an option to forget it).
    When I click on the paired listing or the non paired option I get the following message: Connection Unsuccessful Make sure "Macbook Pro" Is turned on and in range.
    Airplay works fine.
    I tried resetting network settings, reboot my modem, router, clearest all my settings in my phone & nothing gets these two to work together correctly.
    During this message I did get them to connect but it's never permanent. It works for a few moments then disconnects and I have to try over and over in my phone to connect just to get them to work for a few seconds more.

    Just noticed as well, after about 10 minutes, the volume jumps back down again! There is no change I have made in the audio settings on either the phone or speaker and the volume bar on either doesn't move when this happens.

  • Itunes not seeing all the voice memos on my iPhone 4s

    I want to sync all my voice memos from my iPhone 4s to iTunes but when I plug my phone into my macbook air, the section that says voice memos only has about 37 of the 125 voice memos I have on the phone. I also looked in the Music section, which has the same 37 files plus an additional 8. It does not show any of the voice memos from the last 3 years. How can I resolve this? I want to sync but if its is not seeing these files, I'm worried they will get erased.
    I've read that I might be able to plug the iPhone into a PC that is running Linux and see the files under a 'recordings' type folder and them maybe transfer them to a thumb drive but I have not tried this yet as I'm hoping there is another way to extract the voice memos that iTunes is not seeing that are clearly on my phone.
    I have the new Macbook Air with Yosemite and iTunes 12.1.0.50. Oh and I have not updated my iPhone IOS since 2013 so I'm still on 6.1.3. I plan to update to the most current IOS but I want to make sure my voice memos are saved and don't get hosed in the process

    you have to enable that setting on your itunes. It would be under the music tab when you have your phone plugged in.

  • How do I update my apps on the Iphone 5c

    I have had my Iphone since December 2013 and was able to download apps. It is now March 2014 and I have not been able to download apps since February. How do go about figuring out how to get my apps to update and be able to download apps.?

    I click update on the app or try to purchase an app and it asks for my password. I enter my password, the icon spins and then just goes back to saying update or purchase. I have tried resetting my settings and shutting my phone off and nothing has seemed to work.

  • After upgrading to ios7.1 iphone won't play via USB in car.  Why?

    I had been able to play my iphone through my 2013 Honda until I did the 7.1 upgrade.  Now the car does not recognize the iPhone.  How do I fix this?

    Hi I have a 2012 Volvo V50 with premium audio. USB audio via 4S worked fine until the IOS 7 upgrade. Now i keep getting the "this accessory is not supported message"
    I have read through this forum and the only thing apple suggests is "update your car oudio system"
    This is total BS!  Ever heard of backward compatibility? Get this fixed or Android is next for me! Apples resoponse so far shows absolute arrogance.
    I am not the only one and a simple search shows thousands of people having the same issues. Asked my car dealer already and they have loads of people with the same issues. Only devices with issues are Iphones and Ipods since the IOS 7 upgrade. Reset as suggested does not work.

  • IPhone Backup Corrupt

    Hey guys,
    I am having a backup/restore NIGHTMARE right now.
    I have a 16gb iPhone 4s and the original backup was done in iTunes10 on Windows Vista. Since then I have updated to iTunes 11 hoping that would help. Here is what I have done so far step by step.
    1) My16gb iphone gives me about 13.5gb of usable space. Of that 13.5gb of space 6gb was taken up by "other" so I began my mission to reduce the amount of content "other" took up on my phone.
    2) The forums told me that cache and other unneeded files were contained within the "other" section and that I should do a backup and restore to reduce this. (this sounds really stupid to me now but seemed like it was worth a try at the time)
    3) At 1:40am I noticed my last backup was 2 hrs old. (I constantly sync my phone to my computer via itunes & have no icloud backups). So I backed up again using the "Sync" button in iTunes before using the "Update & Restore" function in a version of iTunes 10.
    4) After my phone updated my iOS and took 45min going through the "Restore" portion of the process, it counted down to the last seconds and then gave the message "iTunes could not restore the iPhone "WesHype's iPhone" because the backup was corrupt or not compatible with the iPhone that is being restored."
    5) I thought the next best thing would be restoring from that backup that was made at 11:30pm however it was not on the drop down list. I checked in "Edit/ Preferences / Devices" however the only back ups that were their was a year old backup of my old iphone, a 6month old backup of my ipod and a backup named "WesHype's iPhone - Jul 21, 2013, 2:06 AM" Now 2:06 is the time that I tried to restore the phone and despite the name, in the right column it says the backup is from 1:40am. This is obviously a copy of the corrupt backup.
    6) I tried to restore this backup several times and even upgraded my iTunes to the newest version. Each time restored a new backup appeared with an updated time/date after "WesHype's iPhone" however it was just a copy of the same. Apparently all previous backups have been overwritten.
    7) I began ripping through the files located in "/ Users / WesHype / App Data / Roaming / Apple Computers / MobileSync / Backup" in the "Library" folder there is a folder called "SMS" which seems to contain a lot of the pictures I have sent and received.
    I am convinced it is only a small portion of this backup that is "corrupt" I have experimented with several tools that allow me to view my files but want me to pay to extract them. The problem is although pictures and videos would be nice to retrieve the MAIN thing I need is all my txt messages imported back into the phone the way it was before.(not to a cvs or other txt document like the programs are trying to sell me)
    Im in sales. I have tons of customers with whom my relationship depends on my ability to pull up our previous conversations. My contacts were sync'd to outlook so these text messages are the ONLY thing of extreme importance to me. Is there anyway I can retrieve these text conversations from these 12,000+ random files in the backup folder and import them back into my device? Or ideally repair the whole backup somehow?
    Thanks,
    Wes

    Wes,
    First thing I'd like to suggest: Edit your post so that your personal informationin the screenshots isn't showing (like your Serial # & IMEI #).  Just for your protection.
    Secondly, I don't know of any official way to do what you're suggesting.  You mentioned some thrid-party apps that will convert them to text files.  You might have to bite the bullet and get them recovered that way, and then just forward them to yourself via email.  That way, you can still access them for customers.
    Hopefully, someone else has a better solution for you, but I can't think of anything.

  • Itunes won't regonize my iphone - running windows 8

    itunes won't recognize my iphone - running windows 8

    I found this under another post, it works(not stealing credit) just trying to help.  Re: Upgraded to iTunes 11.1 and now it won't recognize my iPhone Sep 18, 2013 2:15 PM (in response to davidsh_seattle) I was able to fix it!  iTunes can now see my iPhone5.    I followed these instructions: http://support.apple.com/kb/TS1538    And re-installed the "Apple Mobile Device USB Driver".    •     Right-click the Apple iPhone, Apple iPad, or Apple iPod entry in Device Manager and choose Update Driver from the shortcut menu.  •     Click "Browse my computer for driver software."  •     Click "Let me pick from a list of device drivers on my computer."  •     Click the Have Disk button. (If the Have Disk option is not present, choose a device category such as Mobile Phone or Storage Device if listed, and click next. The Have Disk button should then appear.)  •     In the "Install from Disk" dialog, click the Browse button.  •     Use this window to navigate to the following folder:  C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.  •     Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).  •     Click OK in the "Install from Disk" dialog.  •     Click Next and finish the driver-installation steps. Open iTunes to verify that the device is recognized properly.   this worked to sync my iphone 5. not i4 or i3 phones(now ipods) In Device Manager I also noticed I had 3 apple drivers under Portable devices.  I deleted two of them. I updated the remaining driver, now I can sync my i5, i4 and i3.  You may have to View hidden devices.  Open device manager view-show hidden devices portable devices apple iphone "highlight" right click, update device if you have multiple apple iphone under portable devices, delete all but one.

  • Can't Sync With Outlook 2013 Since Upgrading to iOS 7.0.2

    Has anyone else run into this issue and solved it?
    I have an iPhone 4.
    NOTHING will sync between my iPhone and Outlook 2013.
    With iOS 6, as soon as I plugged in my iPhone, Outlook would launch alongside iTunes because it was configured to sync with Outlook.  Now, when I plug in my iPhone, iTunes launches okay, and then it starts to sync, no errors, but never is Outlook started by default (as it used to in the past).
    Even if I manually start Outlook, nothing is still sync'd.
    I had no issues sync'ing before with iOs 6 and Outlook 2013.  This is only since I just upgraded.
    I'm running Office 2013 on Windows 8 x64.
    Thanks!

    I would recommend using the SEARCH function of the forums and locating the many others posts that have already discussed this issue.

  • HT201365 I can not activate the iPhone after restore ios 7

    I restore iphone 5 on ios 7 and I get these messages:
    "We could not complete your iTunes Store request. The network connection was reset" and this one "error 0x80090304".
    My network connection is good.
    I have tried restore again (even on 6.1.4), restarting, resetting my device and nothing.
    Is it possible that this is because I did not turned off Find my iPhone?
    Thanks

    xAphex
    HT4623 Re: upgrading to ios 7, cannot connect to apple store to activate iphone 
    Sep 18, 2013 1:12 PM (in response to scolley)
    Apple is working on the software updating servers so you need to wait!

Maybe you are looking for

  • Changing requirement type in sales order

    Hello, I'm tryin' to change the position requirements type in an existing sales order (switching between make-to-order and make-to-stock). Both options are available to choose (KE and KSV). But after saving the order the field is grey and no longer a

  • WHERE CAN I FIND  ADOBE FLASH BUILDER 4.7 STANDARD INSTALLATION?

    1 year ago I bought Adobe Flash Builder 4.7 Standard. Installation files i lost. Creative Cloud contain Adobe Flash Builder 4.7 Premium, and does not contain Adobe Flash Builder 4.7 Standard. WHERE CAN I FIND  ADOBE FLASH BUILDER 4.7 STANDARD INSTALL

  • Request Status Differs in RSMO and Data target

    Hi, I have a master data full load . it strucked in trfc and i cleared it manually in sm58. The request in RSMO turns to Green automatically,but the datatarget in status tab it shows in red. Why is this behavior and how to rectify it Thanks Bala

  • PDF files stop loading and won't open until I click scroll bar?

    I've tried this on 5 different computers running XP and Windows 7 and it does the same thing every time.  I click on Page 3-7 or 15-17 and it starts to load and then stops.  As you can see on the first screen below it stopped loading at 37kb of a 615

  • Submitted responses landing in wrong columns

    Once a form is filled out and submitted the answers are coming in to the spreadsheet in random order? How do I make them in order of the actual form? For instance, form says: Name, Address, City... The answers are coming in Address, Name, City. How d