IPhone 5 ios6.1.4 wifi doesn't work on any previously used network

Any suggestions? Can't get a wifi connection on my iPhone, my iPad will connect but not phone

Hi lain boyd 64,
Here is an article with troubleshooting suggestions for iOS devices and Wi-Fi networks:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers!
- Ari

Similar Messages

  • Wifi doesn't work with IOS 7

    Hi, I installed on my iphone IOS 7 but now wifi doesn't work. It doesn't find any wifi connections around me. Please help me! What can I do?

    My wifi had no problem connecting to our home wifi prior to the IOS 7 update, but since updating this morning it's not working.  My phone will try to connect to wifi, but then I get the "Unable to join the network" message.  I tried resetting network settings, but that did not solve it.  I tried @bam11's suggestion of being in airplane mode first, but still no luck.  I've had my phone open to the Wi-Fi page, and saw it connect a couple times for the slightest second, but it disconnected just as fast.  My son as the exact same phone (4s) and he's connecting just fine!  Any other suggestions?  I'm afraid to hard reset my phone.

  • Wifi doesn't work very well since ios6 download.  Worked fine before update, help please

    wifi doesn't work very well since ios6 download.  Worked fine before update, help please

    I reset modem and router.  Still have the same issue.  I have a laptop connected to the network as well as a PS3.  Both are working great.  Did a Speedtest app test on iphone.  With 3g it was working good.  When i switched to wifi, it was trying to get the ping test accomplished, and could not.  it was stuck in the ping test at 0% for a long time and never progress. 

  • Hello to everyone!! I have a huge problem and I feel very angry grrrrr!!! My iPhone 4s has iOs 6.0.1 and my wifi doesn't work at all please dear apple do sth!!! help me!!!!!!

    Hello to everyone!! I have a huge problem and I feel very angry grrrrr!!! My iPhone 4s has iOs 6.0.1 and my wifi doesn't work at all please dear apple do sth!!! help me!!!!!!

    Κανε backup στο iTunes και μετά κάνε restore as new. Δηλαδή Settings>General>Reset>Reset all Content and Settings. Οταν τελειώσει θα έχουν σβηστεί όλα. Μην κανεις restore from backup. Δοκίμασε πρώτα νε δεις αν δουλεύει το wi-fi. Αν δεν δουλεύει πας στο service. Αν δουλεύει κάνε restore from backup. Αν το πρόβλημα ξαναεμφανιστεί τότε πρέπει να ξανακανεις restore as new και να το στησεις απο την αρχή. Αν δεν εμφανιστεί έχεις καθαρίσει. Μην ξεχάσεις να συγχρονίζεις επαφές και ημερολόγια πριν το restore.

  • TS1559 Ever since I bought a Belkin blue tooth for my van my wifi doesn't work at home. My husbands still does. He has an iphone 5 and i have an i phone 4.

    Ever since I bought a Belkin blue tooth for my van my wifi doesn't work at home. My husbands still does. He has an iphone 5 and i have an i phone 4.

    Hello lizreceptionist
    Check out the article below for troubleshooting Wi-Fi on your iPhone
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.

    My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.

    SkyDaughter29 wrote:
    My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes.  I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need.  It appears Apple does not sync the texts between the iphone and my MacBook Pro.
    Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
    http://www.ecamm.com/mac/phoneview/
    http://www.wideanglesoftware.com/touchcopy/index.php
    Best of luck.

  • Since update extended wifi doesn't work

    I updated my express extreme as required. Since my airport express that I use to extend my wifi doesn't work anymore. I did a reset and when I try to configuration it keeps telling me that an error has occurred and that I should try again.

    I reset modem and router.  Still have the same issue.  I have a laptop connected to the network as well as a PS3.  Both are working great.  Did a Speedtest app test on iphone.  With 3g it was working good.  When i switched to wifi, it was trying to get the ping test accomplished, and could not.  it was stuck in the ping test at 0% for a long time and never progress. 

  • I have iPhone 5 and the touch screen doesn't work

    I have iphone 5 and the touch screen doesn't work,i want to restart it but my touch screen is not working. I read lots of reviews and support from online all in vain. Please help me fix the problem.
    <Re-Titled By Host>

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the device to boot back up.
    No data is loss doing a reset.

  • I bought one Iphone a 3 weeks ago and I can´t listen what people speak with me, because de microphone doesn´t work, I need  to use the speaker, somebody know what I need to do?

    I bought one Iphone a 3 weeks ago and I can´t listen what people speak with me, because de microphone doesn´t work, I need  to use the speaker, somebody know what I need to do?

    Just thought that I'd report that I've decided on my solution.
    It seems that just making do with what I can find on the US store is the easiest and perhaps also the best way of going about it. All other methods mean trouble. I'm lucky that China hasn't outright blocked the US store, as they HAVE blocked iTunes music store in China already (something about a song about Tibet caused them to block the store entirely).
    So yeah, just going to deal with it I guess. I should be grateful I'm getting anything at all, considering the country I'm in. Still, I just feel so ripped off sometimes when I pay for expensive devices and I can't even get much out of them do to my region. iPhones cost around $700 in China because there's no company like AT&T that you can just sign a contract with to get one, so you have to pay up-front for the phone, and get less features out of it in the end. Makes buying smart phones look like a waste of time and money sometimes, since you can't use the device to do what it was built to do due to censorship and not having any content for your region (though they do have a lot of Chinese apps that I can't use due to not knowing Chinese).

  • I just upgraded the software on my iphone 4s and now the touchscreen doesn't work and i have the itunes logo an arrow and a plug on my screen

    I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes

    The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it

  • M3800 Developer Edition: wifi doesn't work after sleep

    I have an M3800 Developer Edition (2015 model). Ubuntu is factory-installed 14.04, with hardware enablement stack installed. Recently (past 1-2 weeks) wifi doesn't work after sleep (lid closed or open doesn't matter), and only rebooting gets in back. Tried rmmod and modprobe with no success. Has anyone else seen this, and/or are you aware of any open bug(s) for this?
    Relevant ouput:
    lsmod when problem exists:
    iwlmvm                217725  0
    mac80211              652718  1 iwlmvm
    iwlwifi               179412  1 iwlmvm
    cfg80211              494362  3 iwlwifi,mac80211,iwlmvm
    rfkill list when problem exists:
    1: phy0: Wireless LAN
            Soft blocked: no
            Hard blocked: no
    3: hci0: Bluetooth
            Soft blocked: no
            Hard blocked: no
    rmmod the above, then modprobe iwlwifi. Does not fix problem, only rebooting does:
    May  4 08:23:14 jonathan-m3800 kernel: [69089.189614] cfg80211: Calling CRDA to update world regulatory domain
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192181] cfg80211: World regulatory domain updated:
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192184] cfg80211:  DFS Master region: unset
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192185] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192187] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192189] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192190] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192191] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.204141] Intel(R) Wireless WiFi driver for Linux, in-tree:
    May  4 08:23:14 jonathan-m3800 kernel: [69089.204143] Copyright(c) 2003- 2014 Intel Corporation
    May  4 08:23:14 jonathan-m3800 kernel: [69089.204414] iwlwifi 0000:06:00.0: irq 48 for MSI/MSI-X
    May  4 08:23:14 jonathan-m3800 kernel: [69089.204904] iwlwifi 0000:06:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
    May  4 08:23:14 jonathan-m3800 kernel: [69089.207709] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
    May  4 08:23:14 jonathan-m3800 kernel: [69089.207790] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
    May  4 08:23:14 jonathan-m3800 kernel: [69089.208150] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
    May  4 08:23:14 jonathan-m3800 kernel: [69089.392408] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0)
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): using nl80211 for WiFi device control
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): driver supports Access Point (AP) mode
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 4)
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> rfkill5: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill5) (driver iwlwifi)
    May  4 08:23:16 jonathan-m3800 ModemManager[852]: <warn>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0': not supported by any plugin
    lspci:
    06:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
    After reboot:
    lsmod |grep -i iwl:
    iwlmvm                217725  0
    mac80211              652718  1 iwlmvm
    iwlwifi               179412  1 iwlmvm
    cfg80211              494362  3 iwlwifi,mac80211,iwlmvm
    rfkill list after reboot:
    0: nfc0: NFC
            Soft blocked: no
            Hard blocked: no
    1: phy0: Wireless LAN
            Soft blocked: no
            Hard blocked: no
    2: hci0: Bluetooth
            Soft blocked: no
            Hard blocked: no

    Wi-Fi still not reconnecting after sleep 
    http://forums.macrumors.com/showthread.php?t=1229591

  • Why the wifi doesn't work after the upgrade to iOS 5?

    The problem is that after the upgrade to iOS 5 the wifi doesn't work. I mean, iPad is connected to the wifi but not to the internet and also the connection on the other device doesn't work. So I had to turn off the router and then turn it on.

    Try a hard reset first to see if that does any good.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    If no luck with that, you'll need to manually connect your iPod to your iTUnes library in recovery mode using the instructions in the Apple support document below. Doing so will allow you to bypass the passcode and restore the iPod.
    iOS: Unable to update or restore
    B-rock

  • WiFi doesn't work after repair

    Hi,
    Today I received my iMac 27" back from repair. It had the screen and the optical drive replaced since both were defect.
    According to the papers, nothing else has been replaced, but WiFi doesn't work now. I can't connect to my own network (Time Capsule), and only very few networks show up in the list -- quite often, mine is not there, and sometimes there are none at all. Checking with a laptop right next to the iMac, I can see plenty of networks (and my own network works fine).
    Could the Apple guys accidentally have screwed up something? I thought about looking at the antenna connectors on the AirPort card (a guide is available on iFixIt), but it seems quite complicated (and I don't have the necessary screwdrivers).
    Thanks,
    Michael

    And if it under warranty you do not want to open it up and void your warranty.
    When the authorized tech installed new memory modules in my 09 Mac mini, he shorted out my wireless card and they had to order a new one and install it. I would take it back and have them figure out what is wrong.

  • WIFI doesn't work on startup

    When I turn on my dad's iMac (Mid July 2010, iMac) the WIFI doesn't work. When I click the WIFI icon on the menu bar is says somthing to the effect of you don't have WIFI installed.  When I restart it works. this happens every time.
    What do you think is wrong? do I need to take the iMac in to an Apple store?

    Hi,
    First, my wlan card was unknown by w7 (unknown device and I had install all the others drviers). So, because I don't know what card was in the L630, I downloaded the Atheros and the Broadcom wlan drivers.
    When I refresh in the device manager, I tell w7 to automatically find the driver (in drivers folder and in its subdirectory).
    w7 find a Broadcom card, install the driver (with the error message : file not found without any name of file) and shows in the network section of the device manager a Broadcom 802.11n card, but didn't shows the model (I think its a 43xx). Thre isn't any other unknown device in the device manager, all seems right.
    I also try to install it with the Grand Administrator account : same result !!!!!!!!!
    I have try with the Atheros drivers (just in case) but w7 tells me that there isn't any drivers found for my card (so I think its a broadcom)
    When I press Fn + F8 key nothing happens (the led of the wifi stay orange) and the hotkey bar doesn't drop down.
    Thats why I wish to rinstall the hotkey utility, but It doesn't exist for other OS than XP....
    I try to install it (the XP hotkey utility) but its make an error : common module not found
    I try to install common module then the hotkey utility, but I get the same error : common module not found
    I'm agree with you xver, install a fresh w7 64 bits then all the drivers shoud not be such problematic, I do this fort one Tecra A7 and One Aspire One 751, they works perfectly, but they where all of them under XP ......
    Next step :
    I must confirm (to my self too) if the F8 key work properly (by trying to start w7 into safe mode),
    remove any trace of the common module and the hotkey utility from the registry,
    remove the broadcom and atheros wlan driver and delette any trace in the registry,
    go in a church and light a candle for miracle ?

  • My wifi doesn't work

    my wifi doesn't work and i can't turn on or turn off

    Follow the steps in this article: http://support.apple.com/kb/HT4137
    If that doesn't solve the issue, you should offer the device for service at a retailstore or Apple Authorised Service Provider.
    or use selfsolve.apple.com
    Good luck

Maybe you are looking for

  • ISA Error by running an application in JDeveloper 10.1.3

    Hi every body when i run my web application in oc4j( embeded in jdeveloper 10.1.3) I see this error "Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202) " what's wrong? by thanks Javaneh

  • HT4796 What happens with my old user account on my MacBook?

    Once this process is done, is there a way to delete my first user account on my Mac? I mean, this is saying that everything will transfer to a new account; it won't merge with your current account on the Mac. I only want ONE user account on my MacBoo

  • How to calculate the area of a large number of polygons in a single query

    Hi forum Is it possible to calculate the area of a large number of polygons in a single query using a combination of SDO_AGGR_UNION and SDO_AREA? So far, I have tried doing something similar to this: select sdo_geom.sdo_area(( select sdo_aggr_union (

  • LSMW    CRMXIF_ORDER_SAVE_M02 upload attachment

    Hi does anyone know how to upload a batch of attachments using the above interface, in maintain activities. The attachment links should upload using source structure E103CRMXIF_ATTACHMENT_LINK. However this has not worked. Has anyone been able to cre

  • Maximum number of articles in one folio

    Hi, is there a maximum of the number of articles a folio can contain? I can't import any article after I've imported 18 acticle. I need 27 in my folio.