IPhone 5 is rebooting, showing error code on startup and turning white screen with black pixel edges.
My iPhone 5 yesterday began acting weird. Here's a list in order of what is happening.
Phone reboots randomly
Plugged phone into itunes, phone screen lower 3rd started dimming to black after I plugged it in. I unplugged it and it reboot.
Unlocked the phone later in the day and the screen began turning White and an edge of black pixels began forming on the edges of the screen. The phone kept heating so I know it was eating the battery. Got home plugged it into the wall socket and it started charging, batter was empty.
Phone's worked fine this morning
Phone did random reboot, but this time, code was visible in the upper left hand corder on the apple startup logo, it stalled here for two minutes and then finished loading.
Phone worked fine, , did the iOS 6.1.4 update.
Phone did random reboot again, this time the reboot vibrate held in vibration mode for 20 seconds.
Phone is now working fine.
Ah, should I bring it in?
Thanks,
Clay
Based on what you're describing, I'd say make an appointment at the genius bar and have them take a look at it. This sounds like a hardware problem.
Similar Messages
-
I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas? Does a totally dead battery have that effect? I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
Please help, thanks in advance all1Hi eggroll77,
Welcome to Apple Support Communities.
That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
iOS: Restore errors 4005, 4013, and 4014
I hope this helps.
-Jason -
my i phone 5 was dropped, didn't break but went completerly black screen and nonresponsive. I pushed both the home button and top button no response. I plugged it to the computer it gave me white screen with black apple. I pushed the home and the top went black then gave the itune and the charging plug picture. I tried to download and update, the message came as couldn't restore due to unknow error. Any help??
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
MMy phone been stuck in recovery mode tried to restore it nothing worked what can I do its at mobile iphone 5sSo I have a tmobile iphone 5s and it's stuck on the white screen with black logo I tried restoring it with iTunes & iTunes is just telling me errors and my iphone would shut down put a blue screen then go back with the white screen
Has the phone been unlocked officially? Has the phone been jailbroken in the past? If yes, these could be reasons for the behavior of the phone.
iPhone: About unlocking
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues -
my iphone 6 wont go past the start up screen (white screen with black apple) iv treid restoring it on itunes but it disconects its self half way through. what can I do
Did you try to use recovery mode, explained in this article?
If you can't update or restore your iOS device
If it does not work after that, you'll have to get it serviced:
iPhone - Contact Support - Apple Support -
I start my new iPhone 5s 64 for first time , no hello screen , only white screen with black apple logo
How can I start my iPhone (I already did restart - it didn't help)Did you activate the phone already?
-
My Iphone 4 (4 year old) fell on the floor and now the screen is black
My iphone fell on the floor today and the screen went black. it vibrates when charged but thats the only sign of life it shows, i was wondering if i took it to the apple store would it get fixed or replaced for free or will there be a charge?
Out-of-warranty* cost:
iPhone 5s, iPhone 5c, iPhone 5: $269
iPhone 4s: $199
iPhone 4, iPhone 3GS, iPhone 3G, Original iPhone: $149 -
Iphone stuck on white screen with black apple logo
I was updating my Iphone 5 to the new update and left it plugged in to finish the update. When I came back it was stuck on the white loading screen and a message on the computer said iTunes could not connect to the Iphone because it was locked with a passcode and wants me to enter the passcode. However I cannot enter the passcode because the phone won't let me. I cannot get the iphone to shut off or restart as my top button hasn't been very responsive lately. Any suggestions I leave the country for a month on the fourth and need a working phone asap.
You should contact Apple. There is a replacement program for defective power buttons.https://ssl.apple.com/support/iphone5-sleepwakebutton/
-
Help, my iphone is in recovery mode, and itunes shows error code 1
help me, please. my iphone 4 is stuck in recovery mode, and when trying to restore, itunes shows " error code 1, an unknown error occurred"
please help!!!me to ;/
[23:05:36.0982] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[23:05:36.0982] [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[23:05:36.0982] [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
[23:05:36.0982] entering update_gas_gauge
[23:05:36.0982] entering update_ir_mcu
[23:05:36.0982] looking for mcu nub...no entry from path!
[23:05:36.0982] TiSerialFlasher not supported on this platform. Exiting.
[23:05:36.0982] entering update_baseband
[23:05:36.0982] update_baseband: registering for progress notifications
[23:05:36.0982] create_baseband_update_options: Got imeisv: 16
[23:05:36.0982] baseband updater options = <CFBasicHash 0x17533030 [0x59b710]>{type = mutable dict, count = 7,
[23:05:36.0982] entries =>
[23:05:36.0982] 0 : <CFString 0xcf1e38 [0x59b710]>{contents = "SystemRoot"} = <CFString 0x1761cb70 [0x59b710]>{contents = "/mnt1"}
[23:05:36.0982] 5 : <CFString 0xcf1dc8 [0x59b710]>{contents = "DisallowFusiing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 6 : <CFString 0xcf1f48 [0x59b710]>{contents = "autoSetupEnv"} = <CFBoolean 0x59b918 [0x59b710]>{value = false}
[23:05:36.0982] 7 : <CFString 0xcf1e48 [0x59b710]>{contents = "DataRoot"} = <CFString 0x1761e8e0 [0x59b710]>{contents = "/mnt2"}
[23:05:36.0982] 8 : <CFString 0xcf1d98 [0x59b710]>{contents = "forceUpdate"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 9 : <CFString 0xcf1f58 [0x59b710]>{contents = "disablePing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 10 : <CFString 0xcf1eb8 [0x59b710]>{contents = "IMEISwVersion"} = <CFNumber 0x17533010 [0x59b710]>{value = +16, type = kCFNumberSInt32Type}
[23:05:36.0982] }
[23:05:36.0982] update_baseband: querying baseband info
[23:05:36.0982] bbupdater: BEGIN: Querying info at stage first
[23:05:36.0982] bbupdater: BEGIN: Preparing first stage
[23:05:36.0982] bbupdater: Requested boot mode: kBBUBootModeNone
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 5...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 4...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 3...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 2...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 1...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 0...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Preparing first stage
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Querying info at stage first
[23:05:36.0982] send_bbupdate_status: sending baseband update status to host
[23:05:36.0982] update_baseband: calling CFNotificationCenterRemoveEveryObserver
[23:05:36.0982] update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a communication transport to baseband.)
[23:05:36.0982] 0: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 1: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] unable to convert ramrod error 1004
[23:05:36.0982] restore failed with CFError:
[23:05:36.0982] 0: AMRestoreErrorDomain/ffffffff: failed to update device firmware
[23:05:36.0982] 1: AMRestoreErrorDomain/ffffffff: ramrod firmware update failed
[23:05:36.0982] 2: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 3: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] waiting for host to acknowledge final status received...
[23:05:36.0982] void AppleUSBDeviceMuxXXXXXXXXXXXXXXXXXXX(mbuf_t) received reset, closing 0x97b1e4d0
[23:05:36.0982] recv(12, 4) failed: connection closed
[23:05:36.0982] unable to read message size: -1
[23:05:36.0982] received NULL message from host, expected final status
[23:05:36.0982] attempting to dump restore log
[23:05:36.0982] writing log file: /mnt1/restore.log -
Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
repeatedly tried from diffierent computers and the same error code pops up (error -1)That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).
-
i can't download/install apps (like skype) in my iphone 5 from apple store....it shows error code-1009.... can anybody help me...?
The error 1009 error is normally associated with a blocked country. There are a list of countries that Apple is not allowed to sell their software to due to US restrictions
-
I updated iOS in iPhone 5 just now... But I can not download/install apps (Skype,Facebook etc.) from apple store...it shows error code -1009... What can I do...?
The error 1009 error is normally associated with a blocked country. There are a list of countries that Apple is not allowed to sell their software to due to US restrictions
-
This is my iphone 4 ECID: ********, now restore or update showing error code 1 what can i do now?
this is my iphone 4 ECID: ******, now restore or update showing error code 1 what can i do now?
From the article:
Error 1 means that your device or computer may have a hardware issue that's preventing the update or restore from completing.
1.Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
2.Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
3.Confirm that your security software and settings are allowing communication between your device and update servers.
4.If you still see the error message when you update or restore, contact Apple support. -
HT1218 Time Capsule is showing error code -6584)
My Time Capsule is showing error code - "An unexpected error occurred (error code -6584)"; can someone tell me what this means? Correlated, Time Machine does not show any backed up data although it says that ~400 GB out of 1 TB is remaining.
On the More Like This.. see the various very common complaints.. just to the right >>>
First one is good.. anything Pondini responds to listen. https://discussions.apple.com/message/17748380#17748380
A simple reboot of the whole network.. from off.. modem .. router/TC.. clients.. 2min gap will probably fix it.
If it keeps happening, tell us your OS. (Most likely Mountain Lion.. which has networking ability of wet string and a pair of tin cans). -
IPhone 4 unable to repair error code 2001
Hi,
Recently i plugged my iphone 4 in to recharge at night while i went to sleep.
I woke up and saw my iphone rebooting over and over again, when i disconnected it from the power outlet it went all black doing nothing at all.
So i went to plug it in my macbook pro on usb, it started rebooting with the apple logo again ( over and over ).
i read on the internet to put it in recovery mode, so i did and was thinking thank god i can recover it.
Everytime i try to recover my iphone 4 i get a error code 2001 sometimes 2006.
So i read on the apple website to try remove every usb device exept my iphone and try to remove battery of my macbook pro and restart.
Nothing seems to work, it just keeps failing to recover.
Any advice what might work?, or what i shoeld do?
Thanks.http://support.apple.com/kb/TS3694#error2001
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Maybe you are looking for
-
Hi, i am working on MQ-XI-BW Scenario.i have configured JMS Adapter in Plain J2SE Adapter Engine.But the status is red with a message "javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'BWXI:TEST.QMGR' at com.ibm.mq.jms.se
-
Is the new Update not for OS X
JSC 2004 Q2 ML - not trial Just trying to download the new patch - but no dice. unable to connect to update center - no proxy ... Any idee why it is not working Or even better any place to download the update mauallly Thanks -Bj�rn
-
Is there a way to recover deleted mail from my iPad and recover deleted messages from my onw iPhone?
Is there a way to recover deleted mails sent from iPad and/or recover deleted messages from my iPhone? A software or even open it? It is very important for me get back the messages sent on December. I did not have a back up at that time, at least tha
-
How to create a project/solution from a completed dtsx file?
I have been working with the MSDN tutorial (with sql server 2008 R2) at https://msdn.microsoft.com/en-us/library/ms169917(v=sql.105).aspx and now I'm trying to work with one of the completed lessons (lesson1.dtsx). I was able to open Lesson1.dtsx fr
-
I am a novice working on a website... all the help is needed... I have a div layout for my website but want to create content with pictures, text, links inside the div tags... I know that there is many options to do it. What is the best way? Tables?