IPhone 5 issue with using downloaded ringtone

I have an iPhone5 & downloaded a ringtone from iTunes and cannot get it in my sound settings to use as ringtone. Does anyone know how to fix this issue?

Found my answer via the forum....thanks

Similar Messages

I cannot use downloaded ringtons with my Contacts.Ringtones downloaded by programme Ringtones

I cannot use downloaded ringtons with my Contacts.Ringtones downloaded by programme Ringtones

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Issues with using the output redirection character with newer NXOS versions?

Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system:    version 4.1(1b)
system image file is:    bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time:     10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system:    version 3.2(1a)
system image file is:    bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time:     9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successful

Please check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards...

Issue with File Download(messageDownload) on Search Page.

Hi,
I created a custom OAF search page which fetches values from one table. The document in getting stored in my custom table in a BLOB colums and NOT in FND_LOBS.
The table has 3 collumns along with others:
1st is primary key (Record_Seq) ==> number data type
2nd to store actual file name (File1Name) ==> varcahar2 data type
3rd to store the actual uploaded data (File1Data) ==> BLOB data type
The reason for having the “File1Name” is so that I can display the original file name of the document that was uploaded, instead of just the “view” in the search page results .
On the File1Data BLOB and created a messageDownload for that under query results table with following details:
ID : File1Data
ItemStyle : messageDownload
FileMIME Type : pdf
Datatype : BLOB
View Instance : LacEmpExposureVO1
view Attribute : File1Name
File View Attribute : File1Data
When I click on the "File1Name" data hyperlink, it is opening only the first document corresponding to the first record in the search page results.
For example, If my search page returns 10 rows then when I click on the file1name on any row, It is open the first row file name only.
I have a primary key column(RECORD_SEQ) in the Table / EO / VO which is displayed in the search page results.
Also one weird thing is happening:
If I try to do this more than 2 times then it is opening the update page with the first record from the search page results…
I tried to print the context and it is nul the first time, But the second time then context is changing to "update". Dont know how this is happening????
Any advice is greatly appreciated as it is very crucial for me to get this resolved ASAP. I have looked at several forums and did a lot of things as advised in the forums . But nothing seems to work for me.
Thanks,
Mir
CO code for the search page
===========================
if (pageContext.getParameter("Create")!= null)
System.out.println("Into LacEmpExposureCO in PROCESS FORM REQUEST with Context of CREATE");
pageContext.setForwardURL
("OA.jsp?page=/lac/oracle/apps/lac/lacempexposure/webui/LacEmpExposureCreatePG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, //Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAWebBeanConstants.IGNORE_MESSAGES);
else if ("update".equals(pageContext.getParameter(EVENT_PARAM)))
System.out.println("Into LacEmpExposureCO in PROCESS FORM REQUEST with Context of UPDATE");
System.out.println("LacEmpExposureCO ==> RecordSeq in PROCESS FORM REQUEST is: " + RecordSeq);
HashMap params = new HashMap(1);
params.put("RecordSeq", RecordSeq);
pageContext.setForwardURL
("OA.jsp?page=/lac/oracle/apps/lac/lacempexposure/webui/LacEmpExposureUpdatePG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
params,
true, //Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO, // Do not display breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
else {
String strEvent = pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM);
System.out.println(strEvent);
System.out.println("Into the last ELSE part in LacEmpExposureCO.java");

Duplicate post -- Issue with File Download(messageDownload) on Search Page.

Any issues with using LDAP on LINUX for GRC 5.2 UME?

Our company is converting our LDAP servers from AIX to LINUX. The DNS name used in our UME connection should not change. Are there any issues with using LDAP on LINUX? We are currently on GRC 5.2 SP9 (in the middle of upgrading to SP12).
Also, I have been trying to connect our test UME system to a test LDAP box that has already been converted to LINUX but keep getting a 'connection failed' error when I try to test it.
Do you have to reboot the server to test changing the LDAP connections? I've been trying it by going into UME, pulling up the LDAP tab, hitting the Modify button, entering the new userid and password for test LDAP, and hitting the Test Connection button. I've verified that this userid and password is correct for test LDAP.
Is there a way to get more information about why the connection failed?
Thanks.

I've been told by our LDAP Support group that none of the other configuration settings should have to be changed. I should only have to change the id and password to connect to a test version of LDAP instead of our regular connection to the production LDAP.
Can you test a connection for a different userid/password without having to reboot/restart the server? Do I need to change these two settings, save then, reboot/restart, and then do the Test Connection button?
Thanks.

Issues with using relative links in Captivate 8

Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc. We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS. SO we can't put in full paths for the links or we'd have to change them constantly. So an example is that the link for a button might be "../Document/nameofdoc.pdf" This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well. Any suggestions?

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

HR ABAP: Issue with using 'nocommit' parameter on FM HR_INFOTYPE_OPERATION

Issue with using nocommit parameter on FM HR_INFOTYPE_OPERATION:
My client has a requirement to create the following 4 infotypes in sequence in a LUW, i.e either all are created or none is created.
9045 (custom infotype)
0045
0078
0015
I tried to use the nocommit parameter on FM HR_INFOTYPE_OPERATION to insert the 4 infotypes
in a nocoomit mode and then at the end I have issued
'Commit Work', but to my surprise only I/T 0015 is created in the database and the first three (9045, 0045 and 0078) did not make it to database.
I searched many threads on SDN but could not find a solution.
Please let me know if there could be any solution to implement the LUW.
YOur inputs will be appreciated.

Hi ,
i think u can also try with this FM HR_MAINTAIN_MASTERDATA , see its documentations.
no commit works like a simulation mode , what u can do is ,
call FM for all Infotypes and collect all error msgs if any , then finally call FM for all infotypes again without passing nocommit work ( i.e space).
regards
prabhu

Performance issue with using buffering in a APPL0 or APPL1 Table

Hi,
Can anyone please tell me whether there's any serious performace issue with using buffering for a Master or Transaction table? I'm asking this because when I run code inspector for my transp table I'm getting information message:
Message Code 0011 ==> Buffereing is Activated but Delivery Class Is "A" and Message Code 0014 ==> Buffereing is Activated but Data Class Is "APPL1".
So what's other way round for improving performance.
Thanks,
Mahesh M.S.

Hi,
have you read the documentation?
Let me paste it here for you:
Buffering is switched on for the examined table and it has data type 'APPL0' or 'APPL1'.
Tables with data type 'APPL0' or 'APPL1' should contain master or transaction data, so these tables should either contain a large amount of data or their content should change frequently. Therefore buffering the table is unfavourable. Very large tables suppress other tables in the buffer memory and hence slow done any access to them. Transaction data should not be buffered because the synchronization of the changes on the various application servers is very time consuming.
In exceptional cases, small master data tables ('APPL0', size category 0) can be buffered.
The solution depends on the table content. If it is master or transaction data, the table should not be buffered. If the table content does not consist of master or transaction data, the data type should be corrected accordingly.
This should answer your questions...
Kind regards,
Hermann

HI. ... Anyone know of any issues with using Logic Pro music software with Mountain lion OS.. I have heard rumours in the past is that all sorted now?

HI. ...
Anyone know of any issues with using Logic Pro music software with Mountain lion OS..
I have heard rumours in the past is that all sorted now?

At least Logic Pro 9 and Logic Pro X work correctly in Mountain Lion. Furthermore, Logic Pro X requires the latest OS X Mountain Lion version

Are there any issues with using OS X Mavericks and Premiere CC?

Are there any issues with using OS X Mavericks and Premiere CC?

Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Peter Garaway
Adobe
Premiere Pro

Issues with Lightroom downloading

Is anyone else having issues with the download button for Lightroom 4.0 on the Adobe download page? Nothing happens.

Troubleshoot Adobe Download Assistant
Mylenium

Are there any know issues with using multiple (2) apple tv's in the same household??

I'm thinking of getting a second Apple TV. Are there any known issues with using multiple (2) apple tv's in the same household? Thank you in advance.

No, shouldn't have any problems

IPhone Issues with USB Connection and Bluetooth in GM cars

I recently purchased a 2009 Chevy Cobalt SS/TC and it has a USB connection for an iPod. Prior to the 2.1 updated the USB connection worked flawless as well did my handsfree/bluetooth. I had the Apple Genius Bar check my iPhone for any issues due to a corrupt update but everything turned up fine. When i connect to my car I receive an error message (iPod Did Not Authenticate. Check iPod Version). Also my bluetooth will sync but when you answer the phone using hands free you get no audio from the iPhone or speakers in the car. I used a friends iPod and everything worked fine but when I connect with a new iPod it displays the same error. I have contacted GM but they said talk to Apple.
If anyone can help please let me know.
Thanks

Hey J,
Well you got me thinking about your question, and I guess I didn't get it the first time. Again, I own the same car - 09 Chevy Cobalt SS/TC, Black. A lot of fun! I plugged my iPhone into the radio USB connection and get the same error. The GM radio does not support the iPhone. It will not authenticate. The GM radios' firmware is looking for an iPod, not an iPhone. That is expected. As far as the iPhone and it's Bluetooth, again the iPhone's Bluetooth hands free works fine, except I cannot answer the iPhone during an incoming call without first unlocking the iPhone then pressing the mute button on the steering wheel. For what it's worth the iPhone will charge through the USB connection. I'm a little confused on what you are trying to connect. Bottom line, an iPod should always work, an iPhone, not at all. Lastly, I have purchased the GM Personal Audio Link (PAL) and hope to use it with my iPod so I can put the iPod in the glove compartment. Although I have heard a lot of negative comments and issues with it for being slow and sluggish. If so, I'll be sending it back and I'll stay with the USB connection. I'll let you know how that works.

Issues with using utl_http with Oracle Wallet

Hello Everyone,
We are experimenting with Oracle wallet and utl_http and are attempting to do an https transfer and we are facing some problems. I will appreciate your help greatly if you can advise on what could be wrong. We are on db version 10.2.0.1 and Unix HP-UX. The intention ping an https url and get a simple 200 response. Future development would include get/post XML documents from that url and other interesting stuff. I understand that utl_http with Oracle wallet can be used for this purpose.
The wallet has been created and the ewallet.p12 exists. We downloaded the SSL certificate from the url's website and uploaded into the wallet.
Everything works if I put in a url with plain http. However, it does not work with an HTTP*S* url.
With HTTPS when I run the below code I get the following error. Again, greatly appreciate your time and help because this is the first time we are using Oracle wallet manager and do not know where to go from here.
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1029
ORA-29268: HTTP client error
declare
url varchar2(225);
req utl_http.req;
resp utl_http.resp;
my_proxy BOOLEAN;
name varchar2(2000);
value varchar2(2000);
V_proxy VARCHAR2(2000);
v_n_proxy varchar2(2000);
v_msg varchar2(100);
v_len PLS_INTEGER := 1000;
BEGIN
-- Turn off checking of status code.
utl_http.set_response_error_check(FALSE);
--Set proxy server
utl_http.set_proxy('my-proxy');
utl_http.set_wallet('file:<full Unix path to the wallet on DB server>','wallet998');
req := utl_http.begin_request('https://service.ariba.com/service/transaction/cxml.asp');
--Set proxy authentication
utl_http.set_authentication(req, 'myproxyid', 'myproxypswd','Basic',TRUE); -- Use HTTP Basic
resp := utl_http.get_response(req);
FOR i IN 1..utl_http.get_header_count(resp) LOOP
utl_http.get_header(resp, i, name, value);
dbms_output.put_line(name || ': ' || value);
END LOOP;
utl_http.end_response(resp);
exception
when others then
dbms_output.put_line(sqlerrm);
END;

I tried this using plsql ...
declare
SOAP_URL constant varchar2(1000) := 'http://125.21.166.27/cordys/com.eibus.web.soap.Gateway.wcp?organization=o=WIPRO,cn=cordys,o=itgi.co.in';
request UTL_HTTP.req;
begin
dbms_output.put_line('Begin Request');
request := UTL_HTTP.begin_request(SOAP_URL,'POST',UTL_HTTP.HTTP_VERSION_1_1);
dbms_output.put_line('After Request');
exception
when others then
dbms_output.put_line('Error : '||sqlerrm);
end;The output was ...
Begin Request
Error : ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1029
ORA-12535: TNS:operation timed outIt seems to be an issue with the webservice, plz check if its available & allowing requests.

Issue with file download from BLOB type data

i have been using this for a while, with no problems, including on hosted machines.
the upload to the database works fine.. not the issue, and the download script also works fine, on the local WAMP machine.
but once moved to the server it fails.. the query does not work.
i have a feeling that it is something to do with the managed hosting i am using, but they say no, i have tried it on 2 seperate hosted machines (different providers), with no joy.
if i run the select query on the hoisting server via phpmyadmin, the query runs ok.
any suggestions as to what may be causing the problem on the server compared to the local WAMP machine?
i really don't know where to start looking, or where to point the hosting company.
This is the php code to download the blob data, works fine on local WAMP setup, browser asks if you want to save the file/open etc. as expected.
<?php require_once('Connections/connTracker.php'); ?>
<?php
// if id is set then get the file with the id from database
if(isset($_GET['docindex']))
           {$id    = $_GET['docindex'];
        $query = "SELECT document_name, document_type, document_size, document_content " .
           "FROM tracker_documents WHERE document_index = ".$id;
*** seems to be failing here when running the query ***
$result = mysql_query($query) or die('Error, query failed');
           list($name, $type, $size, $content) = mysql_fetch_array($result);
     header("Cache-Control: maxage=1"); //In seconds
   header("Pragma: public");
     header("Content-length: $size");
           header("Content-type: $type");
           header("Content-Disposition: attachment; filename=$name");
           echo html_entity_decode ($content);}
exit;
?>

Hi Gun,
You are the only one responded to my issue. I have allocated some points.
Yes. I have checked the assignment in CRM organizational model.
I did download the org. structure from ECC 5.0
All objects including sales offices are activated for determination and I have verified with green light
As per your suggestion if the sales area data is not matched between the two systems, then how come the error will not reappear during the bdoc reprocess?
What is missing during the first time bdoc process? Looks something is missing for validation module?
Any inputs?
Thanks,
Raj

IPhone 5 issue with using downloaded ringtone

Similar Messages

Maybe you are looking for