Iphone 5 not working when plugged into widows

i have an iphone 5 around 6 months now, it charges perfectly and when i plug it into my laptop it does not show up at all, at the start this was not an issie and i now can now sync music or even charge it on the laptop. i have tried a different laptop and i different lead with no luck. the apple mobile device is intallef and both iphone and itunes are up to date in terms of upates. Ive tried alot f things at this stage and i looked at the thing on the itunes support on this and tried the things it said, again the phone is not even charging on the laptop, i have a windows 7 laptop and iphone 5.. any halp is great thanks

With the device not connected to the computer, remove and reinstall iTunes, following the instructions in this support document http://support.apple.com/kb/HT1923. Make sure you follow them in order, or it could lead to problems. After reinstalling, connect the phone. It should reinstall the drivers at that time.

Similar Messages

  • IPhone will not charge when plugged into computer

    My phone was not working, and so I took it to the apple store nearby. Here were the problems:
    -error message saying "this device not made to work with iPhone"
    -would not charge when plugged into computer OR wall charger
    -person on other end of phone calls said i sounded really far away and had trouble hearing me
    -when i shut it off, it restarts itself immediately
    -cant do a manual reset holding the power and center buttons at same time
    -when plugged into the computer, mouse freezes, and a message appears saying ""power surge on hub port A usb device has exceeded the power limits of its hub port."
    At the genuis bar they told me they cant help me cause that little water damage indicator inside the headphone hole is pink instead of white! I have never ever ever ever ever EVER gotten my phone directly wet. The only thing i could think of was the humidity in the bathroom when I'm taking a shower, and using the timer to use hair remover on my legs lol. But i think this is totally unfair, they wont repair my phone, or even really look at it because of this supposed water damage. My phone has worked fine up to this point, and the thing that happened that started all of this is when i dropped it about a foot off the ground in a DRY parking lot.
    Is there any way they will replace my iphone at no charge?

    Well don't give up try again maybe your luck will change when you go back up there,let somebody else look at your phone not the same person that told you that.I would get a second and a 3rd option about my phone.When you go back don't even tell them what somebody already told you up there ones.
    And after the 3rd time I'll ask them well can they send your phone off to be fixed,It might not be nothing wrong with your phone it might be just they eyes playing tricks on them.Cause I promise you I know my phone had gotten some water in it cause I was sitting on the porch one day me and about 6 other people one of my cousin came out and through a bucket of water at my brother and I was sitting right on the side of him.And when I say my phone look like I than gave it a bath witch when they did that I had already had call the Apple store and told them something was wrong with my phone.And they had gave me appt to come up there,so I went to the Apple store I wanted say two day's latter after I made the appt to let them see my phone but my cousin and brother was playing with that water the day before I had to go so I guess that's why I was mad cause I was going to get other phone the next day after apple look at my old phone.So even with all that they still gave me other phone and I don't see how I didn't have no water in my phone cause of how much water they had through on my phone.
    I guess I was luck cause if they would have told me that I would have freaked out so badly.And the reason why cause I wouldn't had my phone for five days and for them to tell me they couldn't do something oh yea they would have done something cause I would have went to jail that day for tearing up something in the store that worth my 400 and something dollars I spent on my phone and it would have bent one of them computer that would have bent history.
    But I'M telling you,you going to be okay don't give up.Make you other appt and see what they say.

  • Camera not working when plugged into certain USB ports

    I just purchased a Creative Live! Cam for use on my dual G5 running 10.5. When I plug the camera into the USB port on the front of the Mac, it works fine with iChat.
    However, when I plug it into the back of the monitor (older style Cinema display), it says it is in use by another application.
    Any idea how to resolve this? The cable isn't terribly long and the machine is several feet away from the monitor, so I'd like to use the ones on the monitor. (Obviously it gives a power-error message when plugged into the keyboard, which is normal).
    Thanks

    Seems like it is a USB 2.0 or not problem
    10:38 PM Saturday; August 23, 2008

  • My IPHONE will not Sync when plugged into the USB port, although the it makes the sound that it is charging, Itunes does not recognize that it is there, what should I do?

    I have restarted the computer, the IPHONE 4, I have checked for updates, and Have reinstalled Itunes.  The Iphone plugged into the usb makes the noise that its charging but nothing else. It does not sync and ITUNES does not recognize its plugged in.
    Please Assist.

    See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • HT1296 Having a problem with new iphone 5c. have backup iphone 4 and trying to move info to iphone 5c. is not working. when plugging into computer backups from iphone 5c which does not have contacts on it. what am I missing?

    I have backuped my iphone 4 on itunes.
    plugged in iphone 5c- automatically backups the new phone and gets rid of the obackup on the iphone 4
    How to transfer information from iphone 4 to iphone 5c

    Is your 5C already setup? If so, you'll have to erase it before you can restore the backup of your iPhone 4 to it: Settings>General>Reset>Erase All Content & Settings.

  • HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    There is a hardware problem.  Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

  • My iphone is not working when i plug off from charger.

    My iphone is not working when i plug off from charger. Evenmore when it is on the charger and it still not working, it asks to connect to i-tunes but i can't and i can see only emergency calls. What should i do?

    If it only works when connected to a charger, that would indicate a battery issue.
    As for the other issue... do as it suggests and connect to iTunes then restore.  There is no logical, intelligent expectation that anything on the device can be accessed as long as the "Connect to iTunes" screen is displaying.

  • Toshiba backup drive not recognized when plugged into thunderbolt display.

    My Toshiba backup drive does not mount to my MacBookPro when plugged into my Thunderbolt Display. It works beautifully when plugged directly into my MBP, and other USB devices work beautifully when plugged into the same USB ports on the Thunderbolt Display.
    All my equipment is pretty new. The Toshiba is currenlty configured to be my Time Machine back up drive.
    Laptop: 15" Macbook Pro, 2.8 GHz Intel Core i7, 16 GB 100 MHz DDR3, Mac OS 10.8.5
    Backup Drive: Toshiba 500GB Canvio® Basics USB 3.0 Portable Hard Drive
    Apple Thunderbolt Display: 2560 x 1440, NVIDIA GeForce GT 650M 1024 MB graphics
    When I plug the backup drive into the TB Display, usually nothing happens. The blue light on the drive doesn't come on, and it doesn't mount to the desktop. If I wiggle the USB back there, sometimes the blue light will come on, and sometimes it will mount for a minute then go away. This is true for all 3 USB ports. I have not had problems with any other USB devices, but the only other ones I've plugged into the Thunderbolt are my keyboard, bluetooth headset charger, and other items that probably use less power than the backup drive.

    But the cable works when plugged into my laptop. Plus, the cable connection is pretty specific to the device; I'm not sure if you can buy another one seperately.

  • Touch Screen not working when plugged in via usb to laptop

    I am hoping someone can help me figure out what to do because I have run out of ideas... When I plug the phone into my laptop via the USB cable provided with the phone (2006 Dell 1710 Inspiron, Windows Vista) the touch screen does not work. The phone is functioning but I just can't use the touch screen to do anything, more specifically, I want to connect as a mass storage device so I can transfer files, music, pictures, etc.
    I have downloaded the drives, installed and reinstalled the drivers, soft rest, used all 5 USB ports on the laptop and made sure the ports were up to date for drivers and software on the laptop. Still the screen won't work when plugged in.
    My next step was to try it on a different computer so I used an HP desktop running Windows 7. Downloaded the drivers when prompted and low and behold the screen worked just fine when plugged in. It also works when plugged into my computer at work.
    Considering the phone works fine on another computer I am guessing it might be the USB ports on my laptop or the software associated with it.
    If anyone can help I would greatly appreciate it. Thank you!

    I would definitely agree with you, Funkytown.  If we know the phone works properly with two other computers and you've run through all the troubleshooting (awesome job!), then we can determine there is something with the computer that is causing the issue.
    Thank you!

  • HEADPHONES do not work when plugged in - iMac Intel

    So I reinstalled the operating system a few months back. After completing this my headphones do not work when plugged in. I do have them plugged into the correct jack. When i plug them in the built-in speakers go silent for a second or two as if the headphones are working but then the speakers kick back in with no sound in the headphones.
    The headphones worked just prior to reinstall so I'm not sure its the jack itself but something in the operating system.
    I have also checked in System Preferences 'Sound' and when they are plugged in, they do not show in the devices window.
    What the heck is going on? I've read in other forums that this seems to be something of a typical problem but have not found a solution to the problem.
    thanks in advance for your help.
    Message was edited by: ikuchyacokov

    Welcome to the discussions.
    Mate, it sounds more like a system glitch than a hardware issue. I too have been experiences some 'funky' issues. However, they have all been fixed by running Onyx disc maintenance software. Install Onyx and run 'automation'. You can cancel the disc checking operations on start up and ignore the back up disclaimer. Give it a go and post back with the results.
    Onyx - http://www.titanium.free.fr/download.php?sid=6d79ad9269e8f01484b51a1056277186
    Make sure you get the right version for your OS.

  • My new iPad mini will not charge when plugged into adapter. Any suggestions?

    my new ipad mini will not charge when plugged into adapter. What should I try?

    Does the charger get warm at all? Plug the cable into your computer with iTunes open. Does it say not charging.? If it does, the cable is good. The iPad will charge very slowly when pluged into your computer.
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • How to recover music? iPod only works when plugged into wall outlet

    My iPod is probably 5 years old or so. It's been acting up for a while and I stupidly, did not back it up.
    The battery was replaced this weekend so it works when plugged into the wall. It will not power on or do anything when not plugged into the wall. When plugged into the wall charger, it can turn on and says it is charging. It can be used then but as soon as it is unplugged, it's dead.
    When it is plugged into the computer, it says "Charging. Please wait...". There isn't enough power from my laptop to power the iPod, so my computer doesn't even recognize it. It does not show up in iTunes.
    On the brightside, I have a new iPod classic waiting to be used. However, I would VERY much like to get my 90gb+ off of my old iPod first. Is there a way to do this? 
    I'm at a loss. Some of the files are on there are not anywhere else. I have a few songs by a friend who lost them on their own computer.
    Any help would be very appreciated!

    Bump. Is there no way to solve this?

  • My Ipod touch will only work when plugged into a itouch radio.  When I take it out, it goes blank.  Why can I do?

    My Ipod touch will only work when plugged into an Itouch radio.  When I take it out of the charger, it goes blank.  The battery shows fully charged.  It appears that the battery is no longer charging.  What should I do?

    Try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. If that fails, the battery may have gone kaput.

  • My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!

    My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!

    Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
    See this Apple support Article
    http://www.apple.com/support/ipod/five_rs/classic/
    You did not by chance bought the Hello Kitty special edition?
    Have nice day!

  • My iPod only works when plugged into a wall socket!

    Anyone know why my iPOD only works when plugged into a wall outlet? I tried it on the Bose docking station and also my MacBook and it won't work!
    Any ideas??

    Sounds like a dead battery.  You can have Apple swap out the battery for a flat fee or you can send it to a third party service center to have them do the same for job a little less.
    B-rock

Maybe you are looking for

  • Analysis Text doesn't work (no text inserted in Metadata box after Media Encoder green check)

    With premiere CS6 After inserting a .wav or .mov file, I hit "analyze",      I select the relevant language and quality options,      the Media Encoder pops up and runs,      I get the green check,      BUT...the analysis is not inserted in my metada

  • Adding Date to Column Header

    Hi I'm having some issues getting a date into a column header for a tab report I am creating. this thread Re: sysdate in region header suggested using a hidden item and having a pl/sql function body and including the item in the header. So I set the

  • Programatic import can't clear out a property of data-type="set"

    Our catalog repository has a item-descriptor for a "sku" that has a property named "modelProfiles" which is a data-type="set". This allow our SKUs to have a one-to-many relationship with ModelProfile components. We programmatically import and update

  • Can you put back the letter index to make selection of the files easy?

    I have well over 1000 pdf papers and it is tedious to scroll the list to find the right file to open.  The old versions had a column on the right with letters which act as an index, but with the recent upgrade or downgrade, that has somehow disappear

  • Error in T.Code:MI10

    Hi We are getting the below mentioned error in T.Code:MI10. (Punching the data of Customer returnable packaging info.) Special stock at customer/vendor 30700033 does not exist Message no. M7185 Thanks in advance Ravi Kumar