IPhone 5 not working with data or won't send text messages

Is it possible to get my phone replaced by verizon, my phone is not usable right now and I need it in case of emergency. On my LCD screen you can also see thin blue lines throughout; it looks like it is getting worse, is there anything I can do about this??

Wow! Have not heard of an issue like that before! Let's get this figured out! Is the touchscreen responding to your touch? When did the lines appear? Does the phone have any signs of physical or liquid damage? Use think link to determine if it does, there is also a way to view the Liquid Damage Indicator in the phone http://vz.to/1xbpcqs
SandyS_VZW
Follow us on Twitter @VZWSupport

Similar Messages

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?

A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
Any thoughts? The poor lady is very distress

If she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for 4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up.

My macbook pro with ret. won't send text messages!

my macbook pro with ret. won't send text messages ever since i got the new iPad air 2 i entered the verification code and allowed it to send and receive and it still won't work both are allowed to send and receive i even tried just putting one but still won't work on my laptop...

my macbook pro with ret. won't send text messages ever since i got the new iPad air 2 i entered the verification code and allowed it to send and receive and it still won't work both are allowed to send and receive i even tried just putting one but still won't work on my laptop...

Droid X Won't Send Text Messages

My Droid X won't send text messages to one of my contacts who also has Verizon when I am in North Carolina. I can send her picture messages from NC but everytime I try to send her a text I get a message saying "text not sent". I can receive messages from her but cannot send them. I don't have any problem when I am at home in Virginia but in North Carolina it won't send my messages. I don't think it is a problem with my plan or coverage bc I can send messages to everyone else in my phonebook, she is the only person that my phone won't send them too. It makes no sense to me. HELP!!!!!

I am also having issues with my Droid Ultra. I get some messages from my wife, while others do not come through.I can verify this by looking at her phone. This has been happening past few days. I also have noticed that a pop up stating that messaging suddenly has stopped working. Please advise!
System Version = 19.6.3.obake_version.Verizon.en.US
Model Number = DROID ULTRA
System Information = Motorola X8 Mobile Computing System
Android Version = 4.4

HT201263 My IPhone4 won't send text message to anyone.

My Iphone won't send text message to anyone. It always say fail and give me a red sign. I already reset it and turn it of and back on. It won't give me a number to choose from and will give me my email account. I call sprint and they say that my IPhone4 is a detective phone/don't work. I was wondering if anyone knew how to fix it?
It always say waiting for activation and what is SIM
Everything on my IPhone4 work but my message.

This is probably a carrier issue; have you talked to Sprint about this problem? Your complaint was truncated, so it appears to say a "conversation open" at the end. If this is the case then the device is sending text messages, and the other party is receiving them. If this is occurring then it sounds like a problem with the receiving party or carrier.

Hi there. I'm an iphone 4s user and i am unable to send text messages. Any time i try, I get the message "message send failure" can anybody help?

Hi there. I'm an iphone 4s user and i am unable to send text messages. Any time i try, I get the message "message send failure" can anybody help?

try contacting your carrier and see if they can resolve the issue.

My wife and I each have an iPhone 4S. With the upgrade to ios6 all text messages sent from my phone show up on hers to include responses from my text. text that she sends from her phone appear as if from mine. How do we stop it?

My wife and I each have an iPhone 4S. Ever since the upgrade to ios6, text messages sent from my iPhone also appear on hers? All response to those text also show up on both devices. Likewise, text sent by her appear to others as having been sent from my iPhone. I have tried turning group messages off but nothing works. How can I correct this on both phones? Appreciate any help.

Rectory wrote:
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
You need a separate email address but you've already ruled out that solution.

IPhone 5 Showing incorrect Time. Unable to send text messages.

Ok here's my problem. My time on my iPhone is incorrect. I check my settings it's on automatic and it is set to my Hawaii time zone. I am unable to send text messages because I believe the time is not the same as the server. When I try to send a text it says Go to Date & time settings. This happens at least once a day. My time would be incorrect for 10 mins then go back to correct time. This happens on LTE and on WiFi. I also have rebooted the iPhone. One last thing. I check my battery usage. It's says 4,294,967,278 days on Standby. I guess the time is messing up my stats. Anyone have the same problem? Please help. If not I hope new ios update fix this.

My house is in an area that is covered by 3G. But I work in an area that is 4G-LTE. (Actually, my house is right on the border of these coverages because I notice it switching from 3G to LTE periodically.)
Anyway, what I notice is that when I switch from the LTE to 3G network, my iPhone 5 clock gets corrupted. It's 2h22m off. Weird. It doesn't do it right away, but after I'm home for awhile, I'll notice that the clock has been changed. I know this corruption causes errors in my iMessage app because I've gotten an error message about it. It may cause errors in others.
Once I leave my house and go back into stable LTE coverage, I can do one of the following to correct the clock (because it won't autocorrect):
- turn the phone off and then back on
- go to Settings => General => Date&Time and switch "Set Automatically" off and then back on
These fixes will also work if I stay in 3G coverage.
This has happened every day since I got the phone so I know it's a real bug. I'm sending a support request to Apple today. Otherwise, however, I love my iPhone 5 and LTE speed makes all the difference.

Issue with selecting a contact to send text message in BB Hub

Dear all,
Currently, I meet some issues in selecting a contact to send text message.
In BB Hub, tap Text message, tap Compose,
In "To:" field, tab "+" for selecting contact, I see that, there are contacts mixing between mobile contacts, facebook contacs (current, on my Q10, facebook accounts are syned at the first time I login in facebook, but now I not syn any more) so It brings to me a confusion of selecting, sometime I select a wrong contact,...
So, please help me, when I tap "+", I can filter type of Contact I want to use, for example, I can filter facebook contact, mobile contact,...
And I don't understand, why don't classify contact based on type of account, mean that:
Hub is where manage all accounts (face, mail, text message,...), then contacts also classify based on those accounts, for example, when I tap Facebook then only accounts belong to Facebook will be available, and contacts of other accounts will be unavailable,
And, of course, when I tab Text message, then only contacts belong to Text message (mobile) will be availabe, this will avoid the issue that I mentioned above...
Could I be helped by these issues or I must wait for a upgraded OS release? And I don't know all critical issues that mentioned in this forum will be fixed in the next release....
Thanks for your help,
Regards,
Don

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

IPhone not working with Windows 7. Message asks to install 64-bit version

Full error message; "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes".
I have just bought my wife a brand new iPhone 32Gb 3S for Christmas & now it's the most expensive paperweight I own. My wife has also just bought me a brand new 16Gb Nano, which also now comes up with error messages when connected, saying that it faild to load and I need to disconnect it & reconnect it. Naturally, this does not work either.
I'm running Windows 7 & the current 64 bit version of iTunes, but no matter what I do, the above error message comes up.
I have uninstalled and reinstalled iTunes, very carefully following the exact process & order as detailed by apple, with no luck.
Everywhere I look, there seems to be references to a piece of software that should exist on my computer; "Apple Mobile Device Application Support", yet this is not to be found anywhere.
I have spent over 2 hours on the phone with the Apple techies, with no results whatsoever.
Can ANYONE assist me as I'm going completely bonkers & am about to storm into the Apple store and demand my money back?

The MSCONFIG workaround requires I-tunes and I-phone code to be installed on the machine. The problem is that I-tunes will not install on XP 64-bit machines. It will install on Vista but NOT XP. MSCONFIG requires the user to allow code that can't be on the machine until it's been installed! Apple staff have confirmed this to me over the phone after I spent half a day trying to figure it out.
There is an option, which I know some Apple staff are aware of, which has been set up by a Japanese kid and can be found here:
http://sites.google.com/site/yukichigai/iphonex64
There are also a couple of 3rd party I-pod readers which, if I name them, will probably get me kicked off the list. Why the f*ck can't Apple sort this out. XP 64 bit has been around for FIVE YEARS!!!

Iphone not working with car headunit

I have a JVC KW-NX7000 installed in my 2004 Subaru WRX wagon. I must say the head unit is amazing, i love it! I just recently bought a Iphone 3g. I read all the info about both the head unit and phone and then bought a JVC KS-U30 audio/video cable.
I can not get the head unit to see the phone. Just keeps telling me no USB device but will charge the iphone. Thought it might be the cable or head unit so tryed a friends ipod touch. That worked perfict. Tryed another friends iphone 3g also with no luck. I have the AV setting on the head unit set to Ipod, is there another setting i am missing-maby one on the phone? Any help would be much appriciated.

I have a simmilar problem, i have a JVC KD-R606 head unit and seem to have connection issues first thing in the morning or when it's a bit cold it just will not connect, also when i do get it to connect the audio switches over to the Stereo bluetooth connection from the dock connector after about 20 seconds and then have to manually go through the iphone to change the output source to the dock connector, it still works ok when a phone call comes in it switches to the bluetooth automatically and back to the dock connector again, it's getting a bit annoying when it's connecting for the first time and keeps switching speaker source.

Widows Search not working with Data Deduplication?

Hi,
I noticed that many files were missing when searching for them on my Server 2012 Fileserver.
After some troubleshooting I noticed that the ones missing, had a Size on Disk of 4KB and the "SparseFile" and "ReparsePoint" (PL) Flags set.
So it looks like they were processed by the enabled Data Deduplication.
Am I missing something here or is it really the case that deduplicated files cannot be indexed by windows search?

BTW! "... and mounted those file hierarcies below. 5 reparse points" so I my case I had consolidated the users Space into 5 overall concepts on 1 volume each. In that way I had already reduced my use of volumes.
So for now I can add a drive letter to each for trying to make Windows Search work.
But guess I am going to stumble into the same issue then with Windows Search not supporting resparse points again ....because some of the volumes are deduped.
Great experience as ever working with file virtualization in the Windows client, i.e. Liberaries. Just wonder why the heck MS did not improove that experience ...
Right now, with Server 2012, find myself "hacking" again this year 2013 ... to try and make Windows work on some basic issues. All the Flex is starting to go away now ... here comes reality ... NOT WORKING.
NTFS resparse points, long file names, etc. Great Flex! However in theory only. For real when everything is pulled together and the system receives its more or less complete configuration ... unsupported in Windows. Go hack it.
Please stop doing just components test ... and do complete flight tests also. More hollistic tests please across constraints! With a focus in each test ... from 0 to a fully configured system.
How can no support in Windows Search for resparse points in NTFS be a miss during introduction of libraries (Windows 7/2008 R2) and now during introduction of data deduplication (Windows 8/2012) ... during just internal tests at MS? And we all have to use
libraries (thus a remote Windows Search index on remote shares in a domain setup) ... and now Windows 8 WinRT is even more dependent on libraries? How can that be overlooked - or such a basic thing receive no priority - and just get skipped? How can that happen?

Iphone not working with windows 8

Hi all
I have just bought a new laptop and updated to windows 8.1 and iTunes. The problem I have is that when I connect mine or any other iphone via usb it keeps constantly beeping and toggling between showing as plugged in or not plugged in, so obviously won't show on iTunes .. Any ideas ?

i have almost same problem as one of our iphones will be recognized by pc but not the other running Windows 8.1

Unlocked iPhone not working with Vodafone

Hi all,
I have an awkward problem. A couple of months ago I bought an unlocked iphone in Italy because I was moving to the Netherlands and I knew they didn't sell unlocked iPhones there. In the meantime I successfully used my Italian prepaid SIM card.
Now I bought a Vodafone NL SIM card. The first time I tried to use it, I got a No Service message on my iPhone but apparently the SIM was working with another cheap phone that I have. Today I went to the Vodafone store where I bought the SIM and they replaced the SIM card twice. Apparently the last SIM card was working, I could call and receive calls, send and receive text messages.
Unfortunately, I can use the phone just for 10 minutes, then I get a No Service message. I have to reboot my iPhone and then it works again (for 10 minutes).
Vodafone told me that they did everything they could and the problem depends on my phone (they even support the iPhone, all the settings are right, but still no luck).
Do you have any ideas or suggestions? Do you think this problem depends on the iPhone?
I really don't know what to do and I have a 1 year contract (even if it is only 10 € p/m, it is still annoying).
Thank you!
Best,
Marco

Hi ashish,
Did you contact TPG about activating International Roaming before you left for India:
http://www.tpg.com.au/support/international_roaming.php
Cheers,
GB

Tried to send iMessage from iPod touch (5th generation) but continuously says "contact not registered with iMessage". The contact IS registered with iMessage, but won't send any messages to anyone.

I have an iPod touch 5th generation (7.1.2) that has not been sending iMessages to other iMessage users. At first my iPod would not let me sign in to use iMessage, but I searched on different discussion boards that helped me log in. Now the trouble is not being able to send messages at all. I tried to delete the contact I was trying to message and restart the conversation board, but that didn't help at all. The contact continues to say 'xxxxxx not registered with iMessage" when, in fact, they are. I need help to resolve this issue.
Thanks

Can you receive Message?
If so can you reply?
Have you tried when connect to another network?
Also see:
iOS: Troubleshooting Messages
Using FaceTime and iMessage behind a firewall

IPhone 5 not working with data or won't send text messages

Similar Messages

Maybe you are looking for