IPhone 5 - on a website; how to select all without dragging blue dots?

I Would like to send a pasted copy of a website as an email.  I know I can drag the blue dots but that is a hassle.  How can I easily "select all"?
Using iPhone 5.
Not the most recent IOS if that makes difference.
Thanks for your response.
Bob L.

The blue dots appear when you hold your finger down for a few seconds on a word. Instead, just tap the word, and there should be options, including Select and Select All.
It might be easier to tap the share button. In the row of button at the bottom of the screen in Safari, i.e. previous and next, new tab, etc; the middle icon is the share button. Choose Mail.

Similar Messages

  • How to select all the colomns_names from a table, with their datatypes ..

    hi :)
    i would like to know, how to select in SQL all the columns names from a table with their datatypes so that i get something like this :
    Table 1 : table_name
    the column ID has the Datatype NUMBER
    the column name has the Datatype Varchar2
    Table 2 : table_name
    the column check has the Datatype NUMBER
    the column air has the Datatype Varchar2
    and that has to be for all the tables that i own ! ..
    P. S : i m trying to do this with java, so it s would be enough if you just tell me how to select all the tables_names with all their colums_names and with all their datatypes ! ..
    thank you :)
    i ve heard it can be done with USER_TABLES .. but i have no idea how :( ..
    Edited by: user8865125 on 17.05.2011 12:22

    Hi,
    The data dictionary view USER_TAB_COLUMNS has one row for every column in every table in your schema. The columns TABLE_NAME, COLUMN_NAME and DATA_TYPE have all the information you need.
    Another data dictionary view, USER_TABLES, may be useful, too. It has one row pre table.

  • How to SELECT ALL records of a TABLE VIEW in the BSP page

    Hi All,
    In the BSP portal, I am displaying some data(multple records) in the form of a table using the BSP TAG <htmlb:tableView>. I wrote the logic in the 'VIEW' of the BSP application which will be triggered by the controller. I have used the attribute selectionMode = "MULTISELECT" to have a Check Box to select a row.
    My requirement is to have a button/checkbox on the first column of the header of the table view. By clicking on this, it should select/desect all the records of the table. Could someone please help me how to do this? What attribute I should use in the tableview to get the button in the header row of the table and how to select all the records of the table.?
    Please provide your valuable inputs.
    Thanks & Regards,
    Paddu.

    Select all / Deselect all functionality when onRowSelection is there

  • 11.5.9 How to select all invoices in Payment batches ??

    Hi Guys,
    We are working on 11.5.9 Payment batches...
    Could anyone help me out on how to select all the Invoices whether due or not in the Payment Batches ?? I see that unchecking only due' doesn't work...is Pay through date is the only option ??
    Rgds,

    SelectManyListBox has a separate ALL checkbox visible. You can use that component
    jdevadf.oracle.com/adf-richclient-demo/faces/components/selectManyListbox.jspx

  • How to select all files in a stack? Control-click doesn't work

    how to select all files in a stack? Control-click doesn't work

    Switch to list or column view. If you must use icon view, instead of Shift-clicking items, click on an empty space near one of them and drag to enclose them.
    (119467)

  • How to select all files in "user dir" (LastAccessedDirectrory) using applet

    Hi,
    Can anyone tell me " How to select all files in "user dir" (Last Accessed Directrory) using applet"?
    For this which method in applet used?
    Thanks in Advance.

    1) Do you want "user dir" (watever that is) or do you wnat the last accessed directory? Last accessed by what/whom?
    2) Applets can't access the local file sytem, and for good reason, unless they're signed and the client has given permission.

  • How to select all the people that are not in any equipe  ?

    Hi,
    I have a nice SQL expression that gives me as a result all the "AGENTS" (people) that are working in an EQUIPE (a team)
    select a."AGENT_ID",
    a."NOM" || ' ' || a."PRENOM" "Nom",
    c.libelle "Equipe",
    a."DATE_EMBAUCHE" "Date embauche",
    a."DATE_DEBAUCHE" "Date débauche"
    from OBSERVATOIRE."AGENT" a,
    observatoire.equipe_agents b,
    observatoire.equipe c
    where a.agent_id = b.agent_id
    and b.equipe_id = c.equipe_id
    order by nom
    Now, how to select all the agents that are NOT working in any "EQUIPE" (team) ?
    I have tried but could not succeed !
    Thank you for your kind help.
    Christian

    Christian from France wrote:
    It is not working because the table EQUIPE_AGENTS does not contains a row if the agent is not into any equipe.
    CREATE TABLE "OBSERVATOIRE"."EQUIPE_AGENTS"
    (     "EQUIPE_AGENTS_ID" NUMBER NOT NULL ENABLE,
         "EQUIPE_ID" NUMBER NOT NULL ENABLE,
         "AGENT_ID" NUMBER NOT NULL ENABLE)
    CREATE TABLE "OBSERVATOIRE"."AGENT"
    (     "AGENT_ID" NUMBER NOT NULL ENABLE,
         "GRADES_ID" NUMBER NOT NULL ENABLE,
         "NOM" VARCHAR2(50 BYTE) NOT NULL ENABLE,
         "PRENOM" VARCHAR2(50 BYTE),
         "DATE_EMBAUCHE" DATE NOT NULL ENABLE,
         "DATE_DEBAUCHE" DATE)
    The only way to "know" if an agent is not into any equipe (team) is to search into the EQUIPE_AGENTS table, and if we do not find the ID of the agent into this table, then we know that this agent is not into any EQUIPE (team).
    I don't know ho to translate this into SQL.And that's what my query does. It uses an OUTER JOIN so that a result record is returned whether or not there is a record in EQUIPE_AGENTS. And the check for EQUIPE_ID is NULL restricts the result set to those where there IS NOT a record in EQUIPE_AGENTS.
    A more traditional way would be to use NOT IN or NOT EXISTS clauses, but they can prove inefficient.

  • How to select all PERNR from infotype 0000 (Action)

    Hi,
    How to select all PERNR from IT0000 (Action), if an action has been done on IT0000 between reporting START DATE and END DATE. What fields I should consider in IT0000.
    Thanks,
    mini

    You can try:
    data: t_0000 type standard table of pa0000.
    select * from pa0000
       into corresponding fields of table t_0000
      where begda le <your-initial-date> and endda ge <your-final-date>.
    Or use one of options described at last forum.
    Regards!
    Marcello
    Edited by: Marcello Lanzoni on Jul 24, 2008 8:11 PM

  • How to select all the text in a JTextArea??

    any1 know how to select all the text in a textarea?? just like when we press ctrl+a?? i use JTextAreaName.selectAll();doesnt work
    helt..

    worked OK for me
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    class Myprogram extends JFrame
      JTextArea TArea = new JTextArea(10,10);
      public Myprogram()
        JMenu JMenuName= new JMenu("JMenuName");
        JMenuItem  JMenuItemName=new JMenuItem("Select all");
        JMenuName.add(JMenuItemName);
        JMenuItemName.addActionListener(new SelectAllAction());
        getContentPane().add(new JScrollPane(TArea));
        JMenuBar mb = new JMenuBar();
        mb.add(JMenuName);
        setJMenuBar(mb);
        pack();
        setLocationRelativeTo(null);
        setVisible(true);
      class SelectAllAction implements ActionListener
        public void actionPerformed(ActionEvent e)
          TArea.requestFocusInWindow();
          TArea.selectAll();
      public static void main(String[] args){new Myprogram();}
    }

  • I have over 9000 emails on my iphone 5, can anyone tell me how to delete all without having to first select each email ?

    i have over 9000 emails on my new iphone 5, can anyone tell me how to delete them without first selecting each one ?

    Just start Mail on the phone and go to all inboxes or the inbox for the account with 9000 emails.
    Tap Edit near the top and start tapping the little circles. Entire threads can be selected which will delete the multiple emails within a thread saving some steps.
    After tapping the circles, tap Delete at the bottom of the screen.
    Keep at it and you'll get it done.

  • How To Select All Songs In An Album To Play Them?

    How can I easily select all songs in one album to play them?
    Now I have to click the checkbox for each individual song. Surely, there is a shortcut for this??? I keep the library sorted by album. And, no, I am not going to do playlists.
    And, by the way, why isn't there a detailed manual showing how to use the product?

    cochranjk2 wrote:
    If you turn on the Browser while in that list view, then the album art continues to display when you select a single album from the browser pane.
    The browser has three columns. The right hand column lists the albums without album art. I found no way to change that behavior. Yes, I can search for the album by name, but that's not what I would normally do.
    The album art continues to be displayed in the area below the Browser.
    Why are you closing the Browser? You can navigate away from the window with the Browser in it and edit data on any of your other tracks. When you come back, the album you selected will still be selected, and it will stop playing at the end.
    (I'm also not sure what you mean by "go back to the Library". When you turn on the Browser, you're still in your Library; it's just a different view mode. Are you navigating to a different playlist?)
    I close the browser so I can see the list of tracks and albums in the library. With the browser open and one album selected (to play it), it is the only album visible in the library. I found no way to "navigate away from the window with the browser" - the browser is the only view of the library available at that point. I am not using playlists at all (except for syncing with my iPhone and occasionally to burn a CD) so, no, I am not navigating to a different (or any) playlist.
    Aha. That's easy enough to fix: create a playlist (called "Editing" or something) containing all of your music. (You could make it a smart playlist, using the rule "Date added is after 1/1/1900"). Then, while leaving the Browser open in your main library window, you can navigate to your Editing playlist to do all your editing. Then your album will remain selected, and keep playing, in the main library.
    iTunes's functionality is dependent on playlists. There are solutions to the problems you are having, but trying to solve problems without using any playlists is like asking for help with organizing things on the Desktop without wanting to use folders.
    Here's another solution: Leave everything checked, as I said above. Create an empty playlist, and tell Party Shuffle to use that empty playlist as its source. Then, if you highlight tracks, control-click them, and choose "Play next in Party Shuffle," Party Shuffle will add those tracks and play only them, then stop (because it will try to draw the next track from the empty playlist, and not find anything). I just tested this; it works fine.
    Sorry, but I have no idea what you are talking about. After messing around for 20 minutes or more, trying the iTunes (pitiful) help, and finding nothing usable about "Party Shuffle" (the so called help describes things I was unable to locate -- no Party Shuffle playlist, no source pop-up menu, etc.), I quit.
    Step-by-step:
    1) In Preferences > General, make sure the "Party Shuffle" checkbox is checked in the "Show:" options.
    2) Close Preferences, then select the Party Shuffle icon in the Playlists column on the left of your iTunes window. It's probably populated with random songs from your library at this point.
    3) Create a new playlist (command-N), but don't add any songs to it. Name it "Empty" or something similar.
    4) In the Party Shuffle playlist, in the lower left-hand corner, there is a drop-down menu labeled "Source". Select your Empty playlist from that menu. (iTunes will probably warn you that the playlist you selected is empty.) Note that the Party Shuffle playlist depopulates, because it is drawing its music from an empty playlist.
    5) Return to your library, highlight an album (or any group of songs), and control-click any of the tracks. Select "Play next in Party Shuffle" from the contextual menu that appears.
    Party shuffle will play the tracks you selected. When it gets to the end of the selection, it will try to draw a random track from the Empty playlist, and fail, and stop playing. You can then continue to edit song information in your library, or navigate to the Party Shuffle playlist if you want see what's playing and look at the album art that's being played.
    This solution does exactly what you asked for.

  • How to select all columns in a trigger?

    I add a "before delete" trigger on a table, in order to insert the records to a backup table before they are deleted.
    but I cannot write like this : insert into t_backup select * from :old;
    The table has more than 30 columns so I don't want to select them one by one, how can I select all columns?

    Yes, it is possible by writing something like this :
    where col1 = :old.col1; But it is not directly supported. First, we need a package to remember all the OLD records:.... and please see below link for complete code in action :
    http://www.dbforums.com/oracle/925729-trigger-back-up-data.html
    What I am doing here, just copying the code and replacing "emp" with "test" (The table name on which I am going to apply this using notepad find and replace):
    SQL> select * from test_backup;
    no rows selected
    SQL> select * from test;
             A
             1
             2
             4
             5
    SQL> select * from test_backup;
    no rows selected
    SQL>
    create or replace package test_trg_pkg as
      type test_type is table of test%ROWTYPE index by binary_integer;
      test_tab test_type;
    end;
    create or replace trigger test_bds before delete on test
    begin
      test_trg_pkg.test_tab.delete;
    end;
    create or replace trigger test_adr after delete on test
    for each row
    declare
      -- To allow us to select the old values
      pragma autonomous_transaction;
    begin
      select *
      into   test_trg_pkg.test_tab(test_trg_pkg.test_tab.COUNT+1)
      from   test
      where  a = :old.a;  <----- Here you have to give your column name.
    end;
    create or replace trigger test_ads after delete on test
    begin
      for i in 1..test_trg_pkg.test_tab.COUNT loop
        insert into test_backup values test_trg_pkg.test_tab(i);
      end loop;
    end;
    SQL> delete from test where a=1;
    1 row deleted.
    SQL> select * from test_backup;
             A
             1
    SQL> delete from test where a=2;
    1 row deleted.
    SQL> select * from test_backup;
             A
             1
             2
    SQL>Regards
    Girish Sharma

  • How to select all text in document?

    I need to select all text in a long document to export to rtf. I only seem to be able to select a story. Any ideas in how I can do it?
    Thanks
    Ian

    Can't be done. You'll have to link all text boxes together in one long story, or use the script "ExportAllStories.jsx" that comes with your default InDesign installation.
    There are other alternatives (all of them using scripts), and the best way may depend on what your intentions are with the exported file -- if, for example, you want to read it back into their original text frames after editing, well, there are ways to do that.

  • Adobe X - How to select all text in a file

    I have a feeling this is a dumb question, but I need to select all the text in a pdf file and I can not figure how to do it with Adobe X.  It was very simple in previous versions.  Any answers would be greatly appreciated!
                                                                    mathguy06

    ariel0 wrote:
    why are you sending this question to me
    Nobody is sending anything to you.
    Did you subscribe to the forums accidently?

  • How to "select all" trimming photo length in iMovie

    I'm creating a motion capture animation with legos and the default duration for the photo clip is 4.0 seconds. I need to trim them ALL to .5 seconds to achieve the animation I'm looking for but can only see how to do them individually. Is there a "select all" function in iMovie 10.0.1? Previous versions had it but I can't find it now.
    Thanks!

    Hello Mil8,
    It sounds like you would like to highlight all of the images you’ve added to your project and edit the clip length on all of them at once. I found this information in the iMovie Help resource found here:
    Automatically select specific types of content in a movie
    http://help.apple.com/imovie/mac/10.0/#move8b2e15e3
    To select all photos: Choose Edit > Select in Movie > Photos.
    Then you can adjust the duration of the selected clips all at once:
    Select the title, click the Clip Information button in the adjustments bar, and type a duration in the Duration field.
    Note:  If the adjustments bar isn’t shown, click the Adjust button in the toolbar.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

Maybe you are looking for