IPhone 5 Power button issues after recent update.
After this most recent update, my power button is not working as it normally does. It takes two or three attempts to turn the phone off and more than once to turn it. Sometimes it turns on and immediately turns off. This is happening only after this update.
Yes 7.1.2 I had a 7.1 backup, and no issues with that... but then I did a clean DL of 7.1.2 and once again with NO apps on the iphone power button issues... as mentioned. So it is not the apps, nor songs, nor anything else...just 7.1.2 I am now running 7.1 no issues.
Similar Messages
-
I bought my IPhone from Verizon at the end of May 2011. Yesterday the power button on top started sticking and has become difficult to press down. First, should I bring it into a Verizon store or an Apple store? Second, is this something that will be covered within the one year warranty. I have a case on my phone and did not drop it before the button started sticking.
Apple Store. As long as there is no evidence of physical damage from a drop or other traumatic event, the phone will be replaced under warranty.
-
Serious issues after recent updates this weekend
Hey guys, Recently i upgraded to leopard with a clean install, ran GREAT for about 1.5 weeks i hadnt updated from apple through softwareupdate yet untill saturday of this past weekend, since then i would have multiple pixels going crazy on screen, or lines would appear all the way across the screen, then the computer would lock up and only the trackpad would respond. Id restart it, and it would be stable for 10 mins, then do the same thing over again. Finally last night it just locked up after pixels and video freaking out for a good 30 mins on and off. Now when i try to boot i get the gray screen with a folder and question mark located in the middle. I should mention earlier when i encountered this problem i figured id reinstall leopard. so i archived and installed, problem persisted. My mbp is a little over a year old. 2 gigs of ram 2.16 all from apple.
thanks for any help guys, im clueless as what to do
im getting sick of having apple issues from everything to my ipod touch, iphone, macbook pro batteries and now the laptop.Thankyou very much kappy for the quick reply, you give me hope, this will be the first thing i try when i get home. I forgot to mention i also suffer from missing various keystrokes and what not. When i ran the disk utility to check the condition of the disk it locks up. When i repaired permissions multiple errors were shown that were not corrected.
Thanks again kappy! i will be back with a result -
Cyclic network issue after recent update
This topic is covered in a recent post but thought I would highlight it in a separate post now that I know more about it.
Having installed the recent Udev update on a virgin Noodle system, my network (Internet via LAN and Cable using dhcp) goes through a cycle of working, then not working with each subsequent reboot.
My other Linux system (Frugalware) and Windows XP are not effected.
:cry: :cry:Yes, this is an issue that was reported by several testers, but not fixed prior to release. The Engineers believe it has something to do with the Airport Extreme Base Station/Airport Time Capsule units. Some testers switch to non-Apple routers as an experiment and did not experience this issue. Maybe it will get fixed in 10.10.1.
-
Few issues after recent updates
I updated my system day before yesterday and after booting I noticed that the last update didn't go smoothly.
My current setup is Arch stable on Thinkpad X201 on a docking station with external monitor with 1920x1200 resolution.
Issues I have noticed are following:
The console framebuffer seems to limit itself on only part of my screen, perhaps 1024x768 or something like that. The picture is aligned to top-left corner.
When I started StumpWM for the first time the whole X was using 800x600 resolution or similar, using xrandr I could select the 1920x1200 resolution but the StumpWM itself only seemed to use the same portion of the screen as the console framebuffer.
I then edited my xorg.conf and removed all 'non-essential' stuff from it and added "Modes '1920x1200'" to Screens section to get correct resolution when starting X but StumpWM still only use the smaller part of screen.
I then switched to Fluxbox which seems to work with correct resolution. It still has problem in Firefox. The firefox address bars list of addresses is aligned to screens left side instead of being just below the address bar.
Then I noticed that my keyboard won't work correctly. Prior to update I could use my keyboards fn+key combo but now it doesn't work. I use Happy Hacking Keyboard Pro 2.
Any idea how to get my keyboard and stumpwm to work again? StumpWM might be WM issue but it is pretty odd still.
Keyboard issue is more pressing as I can't type umlauted chars with it.
Last edited by Zmyrgel (2010-06-23 06:56:52)Got the keyboard issue fixed. Apparently the xmodmap file I've been using won't work with the new xorg.
Still need to find why the console and stumpwm is working incorrectly. -
Keyboard issues after recent update
so last week I updated my iPad 2 to the newest update ... After that my iPad is unstable and constantly crashes ...and the worst of it is the keyboard pops up and covers where I'm typing , so I cannot see what I'm typing or being able to correct it . I'm very upset right now
My iPad Mini is working just fine with iOS 8.3, so avoiding updates is not the answer. If you have restarted the device, reset it, restored from a backup, and then restored as new, not using a backup and the keyboard is still malfunctioning, then there is something else going on. Make an appointment at the Genius Bar of the nearest Apple Store to have the device looked at.
-
Since updating my iphone 4s to the most recent update it will no longer connect to the wifi at work, where I am not a network administrator and do not have privliges to reset passwords and turn the routers on and off. Any other suggestions for re-connecting? I have never had a problem before and can still connect to other networks i am a part of...
Try Resetting your iPad: Hold down the sleep and home buttons, wait for the Apple logo, let go of the buttons.
-
So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
Cannot receive any signal "searching" constantly.
Turns off as soon as removed from usb ... wont stay on connected to laptop!
HELP!The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
Hardware can fail - it happens, which is why there is a one year warranty. -
My iphone won't turn on after recent update
My iphone won't turn on after recent update. How do I fix this?
2 more options:
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414 -
After recently updating to 7.1.2, all of my past calendar entries for 22014 disappeared and I cannot add new entries??
What account were you using to sync your Calendar? Make sure that account is added to the device, and make sure that Calendars is turned on for that account.
Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
Then, close out all the running apps on your device, and restart it.
Open up your Calendar app. Are your entries back? -
HT1430 iPhone 4S Power Button Issue
I have an iPhone4S that has fallen to the broken power button issue - is there a way to restart it without the power button? My phone is acting strange and I know if I restart it then it will be ok. I am already using the Accessibility feature to lock the screen, but cannot figure out how to restart it short of letting the battery run out.
I have the same issue.... just hold down the lock screen button on your accessibility menu until it shows you the power down option. Then plug the charger in & it will automatically turn back on.
-
Is there a fix for the wifi connectivity issue after ios6 update?
Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks
"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
My imessage is not Working after recent update
My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?
It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.
-
why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.
Maybe you are looking for
-
Ruby threads cannot be used in RubyCocoa without patches to the Ruby interp
Hi, We are getting an error message while running the iTunes U work flow. We get this each time ithe work flow runs it seems. The error message is in the Podcast Producer error log. Here is the error message. /System/Library/Frameworks/Ruby.framework
-
Query variable : selection option with no interval
Hello, Is it possible to define a query variable as selection option, with no interval (like in abap). I am in 3.X version. Many Thanks in advance, Manuel
-
Hello, I have a WebDynpro application that uses JCO to connect to several backend SAP systems. Occasionally, these backend systems are brought down for scheduled maintenance. My application, however, still needs to run during this backend downtime.
-
I need to check if the grants are already given for a particular procedure/table/package. If the grants are not given then I have to give the grants, but if the grants exists then I just want a display saying that grants are already present. Am tryin
-
I just brought a new macbook pro but am hving problems syncing ipad/iphone 4
i just got my new macbook pro. i used my time machine to back up old macbook and then used it to put all my files on new one but when i try to sync ipad i get transfere purchaes .. but when i do that all my things say there not allowed on this mac as