IPhone 5 restore Error (1)
To Whom It May Conern,
I recieved an iPhone from a friend recently (iPhone 5) with a shattered screen. It does not work anymore, and the home button is damaged beyond use as well.
The phone is still recognized by iTunes and the PC's I've use it with however.
I also disessembled it to confirm water damage or not. All stickers white, no water damage.
I was told by the person whom gave it to me, I would need to replace the screen but could still restore it and get it ready as it was currently.
I first hooked it up to a Windows 8 pc, and after some driver/software updating, the phone was recognized/drivers installed/etc., and iTunes had it as able to view Music, Photos, Apps, etc.
I went to factory restore it, updated iTunes/Windows, and now it is getting an error message (1) every time I do this.
I have attempted this a total of about 20 times now, on multiple computers, as well as a Mac. The last attempt was on a Mac, and I saved the error details, as written here:
2014-02-18 10:52:55.000 iTunes[2116:207]: restore library built Oct 10
2013 at 18:04:35
2014-02-18 10:52:55.000 iTunes[2116:207]: iTunes: iTunes 11.1.4
2014-02-18 10:52:55.000 iTunes[2116:207]: iTunes: Software payload
version: 11B554a
2014-02-18 10:52:55.000 iTunes[2116:207]: iTunes: Using MobileRestore
state machine
[10:53:15.0634] Successfully applied power assertion
[10:53:15.0637] Changing state from 'Idle' to 'Restoring'
[10:53:15.0643] amai: AMAuthInstallSsoInitialize: can't find
SSOClient.framework
[10:53:15.0647] requested restore behavior: Erase
[10:53:15.0649] requested variant: Erase
[10:53:15.1101] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:15.9821] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[10:53:15.9825] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"RestoreLogo" Digest = "<CFData 0x7f9d16fc7e00 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9832] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"RestoreDeviceTree" Digest = "<CFData 0x7f9d16892c40
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9839] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"RestoreKernelCache" Digest = "<CFData 0x7f9d168ea840
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9845] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"RestoreRamDisk" Digest = "<CFData 0x7f9d168a7000
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9851] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC"
Digest = "<CFData 0x7f9d16c21100 [0x7fff7d3ddfa0]>{length = 20,
capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9859] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS"
Digest = "<CFData 0x7f9d1507c650 [0x7fff7d3ddfa0]>{length = 20,
capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9865] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"KernelCache" Digest = "<CFData 0x7f9d16f5f980 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9869] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB"
Digest = "<CFData 0x7f9d16fd64f0 [0x7fff7d3ddfa0]>{length = 20,
capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9873] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"AppleLogo" Digest = "<CFData 0x7f9d1689a570 [0x7fff7d3ddfa0]>{length =
20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9878] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryCharging1" Digest = "<CFData 0x7f9d1567e560
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9883] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryFull" Digest = "<CFData 0x7f9d16a7af60 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9888] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryPlugin" Digest = "<CFData 0x7f9d16c1a4b0
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9892] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryCharging0" Digest = "<CFData 0x7f9d15650d30
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9897] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryLow0" Digest = "<CFData 0x7f9d16ecbeb0 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9901] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"BatteryLow1" Digest = "<CFData 0x7f9d13cf2800 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9906] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"RecoveryMode" Digest = "<CFData 0x7f9d1564e840
[0x7fff7d3ddfa0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9910] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"DeviceTree" Digest = "<CFData 0x7f9d1568cb40 [0x7fff7d3ddfa0]>{length
= 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9915] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: personalizing
"iBoot" Digest = "<CFData 0x7f9d16886ee0 [0x7fff7d3ddfa0]>{length = 20,
capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[10:53:15.9919] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID
<CFData 0x7f9d16a71da0 [0x7fff7d3ddfa0]>{length = 20, capacity = 20,
bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[10:53:15.9924] amai: AMAuthInstallRequestSendSync: SSO function
returned NULL, SSO disabled.
[10:53:15.9928] amai: AMAuthInstallDebugWriteObject: debug object
written:
file://localhost/tmp/PersonalizedBundle_1EFE2EB1-D784-4DF4-ACCE-B4DAF9520
FC2/amai/debug/tss-request.plist
[10:53:15.9931] amai: AMAuthInstallHttpMessageSendSync:
httpRequest=<CFHTTPMessageRef 0x7f9d16f60320(0x7f9d16f60330)> { POST
request, priority -1, url
http://gs.apple.com:80/TSS/controller?action=2 }
[10:53:16.2453] amai: AMAuthInstallRequestSendSync: received tss
response (server version: 2.1.0)
[10:53:16.2457] amai: AMAuthInstallDebugWriteObject: debug object
written:
file://localhost/tmp/PersonalizedBundle_1EFE2EB1-D784-4DF4-ACCE-B4DAF9520
FC2/amai/debug/tss-response.plist
[10:53:16.2517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle:
no entry in manifest found for "Diags"
[10:53:16.2566] iBoot build-version = iBoot-1940.3.5
[10:53:16.2574] iBoot build-style = RELEASE
[10:53:16.2576] requested restore behavior: Erase
[10:53:16.2598] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:16.2605] requested restore behavior: Erase
[10:53:16.2625] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:16.2633] unable to open device_map.txt: No such file or directory
[10:53:16.2987] found device map entry for 0x00008950 0x00000002.
boardConfig=n42ap platform=s5l8950x
[10:53:16.2991] _AMRestoreCopyDeviceMapPlistEntryForHardware:
firmwareDirectory not in options
[10:53:16.2994] DeviceRequest failed: 0xe000404f
[10:53:16.2997] command device request for 'getenv radio-error' failed:
2008
[10:53:16.2999] radio-error not set
[10:53:16.3001] unable to open device_map.txt: No such file or directory
[10:53:16.3003] <Recovery Mode Device 0x7f9d1563ab30>: production fused
device
[10:53:16.3005] requested restore behavior: Erase
[10:53:16.3016] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:16.3023] requested restore behavior: Erase
[10:53:16.3043] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:16.3491] <Recovery Mode Device 0x7f9d1563ab30>: operation 4
progress -1
[10:53:16.3966] bootstrapping restore with iBEC
[10:53:16.3968] requested restore behavior: Erase
[10:53:16.3988] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:16.4108] <Recovery Mode Device 0x7f9d1563ab30>: operation 31
progress -1
[10:53:17.4124] <Recovery Mode Device 0x7f9d1563ab30>: Recovery mode
succeeded
[10:53:17.4130] Finished Recovery Restore Phase: Successful
[10:53:17.5143] Recovery mode device disconnected
[10:53:17.5146] Recovery mode device disconnected
[10:53:17.5148] Device removed when in state Restoring, moving device
to transition state
[10:53:17.5150] Changing state from 'Restoring' to 'Transitioning'
[10:53:17.5153] Creating timer to monitor transition
[10:53:19.6720] Recovery mode device connected
[10:53:19.6722] Transitioning device returned, continuing restore.
[10:53:19.6723] Canceling timer
[10:53:19.6725] Changing state from 'Transitioning' to 'Restoring'
[10:53:19.6727] requested restore behavior: Erase
[10:53:19.6728] requested variant: Erase
[10:53:19.6745] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.1654] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[10:53:20.1658] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreLogo"
[10:53:20.1662] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreDeviceTree"
[10:53:20.1667] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreKernelCache"
[10:53:20.1671] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreRamDisk"
[10:53:20.1674] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"iBEC"
[10:53:20.1676] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has
been previously personalized; skipping it
[10:53:20.1680] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"KernelCache"
[10:53:20.1683] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been
previously personalized; skipping it
[10:53:20.1688] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"AppleLogo"
[10:53:20.1691] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryCharging1"
[10:53:20.1695] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryFull"
[10:53:20.1699] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryPlugin"
[10:53:20.1703] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryCharging0"
[10:53:20.1707] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryLow0"
[10:53:20.1712] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryLow1"
[10:53:20.1716] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RecoveryMode"
[10:53:20.1720] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"DeviceTree"
[10:53:20.1724] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"iBoot"
[10:53:20.1727] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[10:53:20.1731] iBoot build-version = iBoot-1940.3.5
[10:53:20.1734] iBoot build-style = RELEASE
[10:53:20.1737] requested restore behavior: Erase
[10:53:20.1740] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.1745] requested restore behavior: Erase
[10:53:20.1757] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.1766] unable to open device_map.txt: No such file or directory
[10:53:20.1771] found device map entry for 0x00008950 0x00000002.
boardConfig=n42ap platform=s5l8950x
[10:53:20.1775] _AMRestoreCopyDeviceMapPlistEntryForHardware:
firmwareDirectory not in options
[10:53:20.1779] DeviceRequest failed: 0xe000404f
[10:53:20.1782] command device request for 'getenv radio-error' failed:
2008
[10:53:20.1785] radio-error not set
[10:53:20.1787] unable to open device_map.txt: No such file or directory
[10:53:20.1791] <Recovery Mode Device 0x7f9d16edfcf0>: production fused
device
[10:53:20.1794] requested restore behavior: Erase
[10:53:20.1805] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.1813] requested restore behavior: Erase
[10:53:20.1834] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.2282] <Recovery Mode Device 0x7f9d16edfcf0>: operation 4
progress -1
[10:53:20.2754] unable to open device_map.txt: No such file or directory
[10:53:20.2762] found device map entry for 0x00008950 0x00000002.
boardConfig=n42ap platform=s5l8950x
[10:53:20.2769] _AMRestoreCopyDeviceMapPlistEntryForHardware:
firmwareDirectory not in options
[10:53:20.2776] requested restore behavior: Erase
[10:53:20.2802] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.2816] requested restore behavior: Erase
[10:53:20.2851] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:20.2862] <Recovery Mode Device 0x7f9d16edfcf0>: operation 42
progress -1
[10:53:20.2867] requested restore behavior: Erase
[10:53:20.2889] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:21.3216] <Recovery Mode Device 0x7f9d16edfcf0>: operation 5
progress -1
[10:53:21.6870] unable to open device_map.txt: No such file or directory
[10:53:21.6874] found device map entry for 0x00008950 0x00000002.
boardConfig=n42ap platform=s5l8950x
[10:53:21.6878] _AMRestoreCopyDeviceMapPlistEntryForHardware:
firmwareDirectory not in options
[10:53:21.6881] DeviceRequest failed: 0xe000404f
[10:53:21.6884] command device request for 'getenv ramdisk-delay'
failed: 2008
[10:53:23.3506] <Recovery Mode Device 0x7f9d16edfcf0>: operation 6
progress -1
[10:53:24.3622] <Recovery Mode Device 0x7f9d16edfcf0>: operation 7
progress -1
[10:53:24.6932] <Recovery Mode Device 0x7f9d16edfcf0>: operation 8
progress -1
[10:53:24.6935] unable to open device_map.txt: No such file or directory
[10:53:24.6937] found device map entry for 0x00008950 0x00000002.
boardConfig=n42ap platform=s5l8950x
[10:53:24.6940] _AMRestoreCopyDeviceMapPlistEntryForHardware:
firmwareDirectory not in options
[10:53:24.6943] <Recovery Mode Device 0x7f9d16edfcf0>: operation 9
progress -1
[10:53:24.6945] <Recovery Mode Device 0x7f9d16edfcf0>: Recovery mode
succeeded
[10:53:24.6948] Finished Recovery Restore Phase: Successful
[10:53:25.8983] Recovery mode device disconnected
[10:53:25.8984] Device removed when in state Restoring, moving device
to transition state
[10:53:25.8987] Changing state from 'Restoring' to 'Transitioning'
[10:53:25.8989] Creating timer to monitor transition
[10:53:28.3991] RestoreOS mode device connected
[10:53:28.3992] Transitioning device returned, continuing restore.
[10:53:28.3994] Canceling timer
[10:53:28.3996] Changing state from 'Transitioning' to 'Restoring'
[10:53:28.4028] <Restore Device 0x7f9d16a1e4d0>: operation 44 progress
-1
[10:53:28.4036] requested restore behavior: Erase
[10:53:28.4039] requested variant: Erase
[10:53:28.4054] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:28.8914] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[10:53:28.8918] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreLogo"
[10:53:28.8922] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreDeviceTree"
[10:53:28.8927] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreKernelCache"
[10:53:28.8929] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RestoreRamDisk"
[10:53:28.8932] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"iBEC"
[10:53:28.8934] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has
been previously personalized; skipping it
[10:53:28.8937] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"KernelCache"
[10:53:28.8940] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been
previously personalized; skipping it
[10:53:28.8944] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"AppleLogo"
[10:53:28.8948] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryCharging1"
[10:53:28.8952] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryFull"
[10:53:28.8956] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryPlugin"
[10:53:28.8961] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryCharging0"
[10:53:28.8965] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryLow0"
[10:53:28.8968] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"BatteryLow1"
[10:53:28.8971] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"RecoveryMode"
[10:53:28.8973] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"DeviceTree"
[10:53:28.8976] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: not personalizing
"iBoot"
[10:53:28.8978] amai:
_AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[10:53:28.8981] requested restore behavior: Erase
[10:53:28.8983] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:28.9006] device did not return saved USB log
[10:53:28.9009] device did not return saved panic log
[10:53:28.9011] previous restore failed with exit status 0x100
[10:53:28.9035] connected to service com.apple.mobile.restored
[10:53:28.9038] using protocol version 13
[10:53:28.9084] unable to open device_map.txt: No such file or directory
[10:53:28.9087] board config = n42ap
[10:53:28.9113] no value returned for BootArgs
[10:53:28.9116] _copyDeviceProperty() failed for restore bootargs
[10:53:28.9132] no value returned for MarketingPartNumber
[10:53:28.9135] _copyDeviceProperty() failed for mpn
[10:53:28.9138] requested restore behavior: Erase
[10:53:28.9158] amai: AMAuthInstallBundleCopyBuildIdentityForVariant:
No baseband chipid reported. Will match Build Identity based on ap
chipid and boardid only.
[10:53:28.9194] value query for 'HardwareModel' returned 'N42AP'
[10:53:28.9244] <Restore Device 0x7f9d16a1e4d0>: operation 28 progress
-1
[10:53:44.9192] previous restore failed: '
[10:53:44.9192] [nand_part_core:INF@ 145] created partition 4 as
'Filesystem'
[10:53:44.9192] Pthread support ABORTS when sync kernel primitives
misused
[10:53:44.9192] BSD root: md0, major 3, minor 0
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 4
[10:53:44.9192] [nand_part_core:INF@ 145] created partition 5 as
'System Config'
[10:53:44.9192] [nand_part_core:INF@ 145] created partition 6 as
'Diagnostic Data'
[10:53:44.9192] [nand_part_core:INF@ 145] created partition 7 as 'Bad
Block Table'
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 7
[10:53:44.9192] AppleSamsungSerial: Identified Serial Port on ARM
Device=uart1 at 0x32600000(0x9cb9d000)
[10:53:44.9192] com.apple.AppleFSCompressionTypeZlib kmod start
[10:53:44.9192] AppleSwissPPNFTL started with IOFlashStoragePartition
provider
[10:53:44.9192] [NAND] _FindFlashMediaAndKeepout:601 physical nand
block offset 1
[10:53:44.9192] AppleNANDFTL registered[NAND] start:356 this 0xa31aa800
PROVIDER=0xa2e64100 flashMedia=0xa2e64100
[10:53:44.9192] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
[10:53:44.9192] [NAND] WMR_Start:174 FIL_Init [OK]
[10:53:44.9192] AppleSamsungSerial: Identified Serial Port on ARM
Device=uart3 at 0x32800000(0x9cbce000)
[10:53:44.9192] com.apple.AppleFSCompressionTypeZlib load succeeded
[10:53:44.9192] L2TP domain init
[10:53:44.9192] L2TP domain init complete
[10:53:44.9192] PPTP domain init
[10:53:44.9192] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[10:53:44.9192] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[10:53:44.9192] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) =
0x0
[10:53:44.9192] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) =
0x0
[10:53:44.9192] CLCD not initied by iBoot, driver will not load
[10:53:44.9192] [NAND] WMR_Open:371 VFL_Open [OK]
[10:53:44.9192] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[10:53:44.9192] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[10:53:44.9192] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) =
0x0
[10:53:44.9192] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) =
0x0
[10:53:44.9192] AppleH4CamIn::start - back camera expected
[10:53:44.9192] AppleH4CamIn::start - front camera expected
[10:53:44.9192] AppleH4CamIn::power_off_hardware
[10:53:44.9192] AppleH4CamIn::setPowerStateGated: 0
[10:53:44.9192] AppleMultitouchN1SPI: successfully started
[10:53:44.9192] AppleAP3DSH::probe found device with ID: 0x3f
[10:53:44.9192] AppleAP3DSH::handleStart _calibrationMatrix [65149
-1004 -881] [-2131 64608 -379] [481 595 66374]
[10:53:44.9192] AppleAP3DSH::handleStart _calibrationOffsets [950093
-603282 3384666]
[10:53:44.9192] AppleAP3DSH::handleStart - No calibration inverse
matrix or the data is invalid, Compute locally
[10:53:44.9192] AppleAP3DSH::handleStart _calibrationInverseMatrix
[65953 1016 880] [2172 66508 408] [-497 -603 64699]
[10:53:44.9192] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2433
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[10:53:44.9192] AppleSynopsysOTGDevice::gated_handleUSBCableConnect
cable connected, but don't have device configuration yet
[10:53:44.9192] AppleCS35L19Amp: could not allocate control 395
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableType Detached
[10:53:44.9192] AppleSynopsysOTGDevice::gated_handleUSBCableConnect
cable connected, but don't have device configuration yet
[10:53:44.9192] AppleMultitouchN1SPI: detected HBPP. driver will be
kept alive
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[10:53:44.9192] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[10:53:44.9192] AppleSynopsysOTGDevice::gated_handleUSBCableConnect
cable connected, but don't have device configuration yet
[10:53:44.9192] inverting UI colordisplay-scale = 2
[10:53:44.9192] display-rotation = 0
[10:53:44.9192] found applelogo at
/usr/share/progressui/[email protected]
[10:53:44.9192] unable to find a usable display
[10:53:44.9192] unable to get framebuffer
[10:53:44.9192] found PTP interface
[10:53:44.9192] AppleSynopsysOTGDevice - Configuration: PTP
[10:53:44.9192] AppleSynopsysOTGDevice Interface: PTP
[10:53:44.9192] AppleSynopsysOTGDevice - Configuration: iPod USB
Interface
[10:53:44.9192] AppleSynopsysOTGDevice Interface:
USBAudioControl
[10:53:44.9192] AppleSynopsysOTGDevice Interface:
USBAudioStreaming
[10:53:44.9192] AppleSynopsysOTGDevice Interface: IapOverUsbHid
[10:53:44.9192] AppleSynopsysOTGDevice - Configuration: PTP + Apple
Mobile Device
[10:53:44.9192] AppleSynopsysOTGDevice Interface: PTP
[10:53:44.9192] AppleSynopsysOTGDevice Interface: AppleUSBMux
[10:53:44.9192] AppleSynopsysOTGDevice - Configuration: PTP + Apple
Mobile Device + Apple USB Ethernet
[10:53:44.9192] AppleSynopsysOTGDevice Interface: PTP
[10:53:44.9192] AppleSynopsysOTGDevice Interface: AppleUSBMux
[10:53:44.9192] AppleSynopsysOTGDevice Interface:
AppleUSBEthernet
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function USBAudioStreaming
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function AppleUSBEthernet
[10:53:44.9192] IOAccessoryPortUSB::start
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function USBAudioControl
[10:53:44.9192] virtual bool AppleUSBDeviceMux::start(IOService *)
build: Sep 27 2013 23:30:36
[10:53:44.9192] init_waste
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function AppleUSBMux
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function IapOverUsbHid
[10:53:44.9192] AppleSynopsysOTGDevice::gated_registerFunction Register
function PTP
[10:53:44.9192] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
[10:53:44.9192] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject
*) setting debug level to 7
[10:53:44.9192] 000169.889813 wlan.N[0]
AppleBCMWLANBusInterfaceHSIC::attachBusGated():
AppleBCMWLANBusInterfaceHSIC (0xa3c5a800) -->>--
AppleBCMWLANBusInterfaceHSICShim (0xa43240c0)
[10:53:44.9192] AppleBCMWLANCore::init(): IO80211-40 Sep 27 2013
22:57:52
[10:53:44.9192] AppleBCMWLANCore::init(): AppleBCMWLANV2-249.2 Sep 27
2013 23:32:48 release
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f268 established 62078<-lo0->49152 62078<-usb->56320
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f268
[10:53:44.9192] recv(13, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f268 established 62078<-lo0->49153 62078<-usb->56576
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f210 established 62078<-lo0->49154 62078<-usb->56832
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f1b8 established 62078<-lo0->49155 62078<-usb->57088
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f210
[10:53:44.9192] recv(14, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f1b8
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f1b8 established 62078<-lo0->49156 62078<-usb->57344
[10:53:44.9192] recv(15, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f268
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f210 established 62078<-lo0->49157 62078<-usb->57600
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f268 established 62078<-lo0->49158 62078<-usb->57856
[10:53:44.9192] recv(13, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f268
[10:53:44.9192] recv(13, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f210
[10:53:44.9192] recv(15, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa482f210 established 62078<-lo0->49159 62078<-usb->58112
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa482f210
[10:53:44.9192] recv(13, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] 000169.996345 wlan.N[1] AppleBCMWLANCore::start():
Starting with MAC Address: <<<mac address>>>
[10:53:44.9192] 000169.996747 wlan.N[2]
AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags
0x20, dev 0x80326000 (this 1, provider 0)
[10:53:44.9192] 000169.996762 wlan.N[3]
AppleBCMWLANCore::setPowerStateGated(): Received power state change
before driver has initialized, ignoring
[10:53:44.9192] IO80211Peer::addPhyStatistics Phy stats started for
addr <<<mac address>>>
[10:53:44.9192] IO80211Peer::addPhyStatistics Tx Completion stats
started for addr <<<mac address>>>
[10:53:44.9192] IO80211PeerManager::initWithInterface cant add
monitoring timer
[10:53:44.9192] Started logging for intf
[10:53:44.9192] IO80211PeerManager::initWithInterface: inited peer
manager
[10:53:44.9192] IO80211Interface::init peerManager=0xa4de4400
[10:53:44.9192] start:156
[10:53:44.9192] start:156
[10:53:44.9192] [NAND] WMR_Open:420 FTL_Open [OK]
[10:53:44.9192] [NAND] _publishServices:642 FTL capabilities: 0x00000001
[10:53:44.9192] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks -
count: 23 max_count: 23
[10:53:44.9192] [NAND] _fetchBorrowedList:881 number of borrowed blocks
16
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 0
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 1
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 2
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 3
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 5
[10:53:44.9192] [nand_part_core:INF@ 157] published partition 6
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500ca50 established 62078<-lo0->49160 62078<-usb->58368
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa500ca50
[10:53:44.9192] recv(9, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500ca50 established 62078<-lo0->49161 62078<-usb->58624
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa500ca50
[10:53:44.9192] recv(9, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500ca50 established 62078<-lo0->49162 62078<-usb->58880
[10:53:44.9192] unrecognized key 'BootArgs' in value query
[10:53:44.9192] failed to handle value query for key 'BootArgs',
sending back empty response
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa500ca50
[10:53:44.9192] recv(9, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500ca50 established 62078<-lo0->49163 62078<-usb->59136
[10:53:44.9192] unrecognized key 'MarketingPartNumber' in value query
[10:53:44.9192] failed to handle value query for key
'MarketingPartNumber', sending back empty response
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa500ca50
[10:53:44.9192] recv(9, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500ca50 established 62078<-lo0->49164 62078<-usb->59392
[10:53:44.9192] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t)
received reset, closing 0xa500ca50
[10:53:44.9192] recv(9, 4) failed: connection closed
[10:53:44.9192] unable to read message size: -1
[10:53:44.9192] could not receive message
[10:53:44.9192] client protocol version 13
[10:53:44.9192] *** UUID 360DBEAB-9524-1042-B7B7-D4CE5137AC4D ***
[10:53:44.9192] Restore options:
[10:53:44.9192] UUID => <CFString 0x1564af90
[0x3d0ad0]>{contents = "360DBEAB-9524-1042-B7B7-D4CE5137AC4D"}
[10:53:44.9192] MinimumSystemPartition => <CFNumber 0x1564aee0
[0x3d0ad0]>{value = +1589, type = kCFNumberSInt64Type}
[10:53:44.9192] SystemPartitionSize => <CFNumber 0x1564a8e0
[0x3d0ad0]>{value = +1589, type = kCFNumberSInt64Type}
[10:53:44.9192] SystemPartitionPadding => <CFBasicHash
0x1564b1f0 [0x3d0ad0]>{type = mutable dict, count = 5,
[10:53:44.9192] entries =>
[10:53:44.9192] 2 : <CFString 0x1564b1a0 [0x3d0ad0]>{contents = "128"}
= <CFNumber 0x1564af10 [0x3d0ad0]>{value = +1280, type =
kCFNumberSInt64Type}
[10:53:44.9192] 3 : <CFString 0x1564ae20 [0x3d0ad0]>{contents = "16"}
= <CFNumber 0x1564af40 [0x3d0ad0]>{value = +160, type =
kCFNumberSInt64Type}
[10:53:44.9192] 4 : <CFString 0x1564aeb0 [0x3d0ad0]>{contents = "32"}
= <CFNumber 0x1564ac20 [0x3d0ad0]>{value = +320, type =
kCFNumberSInt64Type}
[10:53:44.9192] 5 : <CFString 0x1564ab20 [0x3d0ad0]>{contents = "8"} =
<CFNumber 0x1564a5e0 [0x3d0ad0]>{value = +80, type =
kCFNumberSInt64Type}
[10:53:44.9192] 8 : <CFString 0x1564abd0 [0x3d0ad0]>{contents = "64"}
= <CFNumber 0x1564ab10 [0x3d0ad0]>{value = +640, type =
kCFNumberSInt64Type}
[10:53:44.9192] }
[10:53:44.9192]
[10:53:44.9192] entering load_sep_os
[10:53:44.9192] device has no sep
[10:53:44.9192] entering partition_nand_device
[10:53:44.9192] device supports boot-from-NAND
[10:53:44.9192] nand device is already partitioned
[10:53:44.9192] entering wait_for_storage_device
[10:53:44.9192] Searching for NAND service
[10:53:44.9192] Found NAND service: IOFlashStoragePartition
[10:53:44.9192] NAND initialized. Waiting for devnode.
[10:53:44.9192] entering clear_remap_variable
[10:53:44.9192] waiting for matching IOKit service: <CFBasicHash
0x1564a9b0 [0x3d0ad0]>{type = mutable dict, count = 2,
[10:53:44.9192] entries =>
[10:53:44.9192] 0 : <CFString 0x1c5e98 [0x3d0ad0]>{contents =
"IOResourceMatch"} = <CFString 0x156498e0 [0x3d0ad0]>{contents =
"IONVRAM"}
[10:53:44.9192] 2 : <CFString 0x529f00 [0x3d0ad0]>{contents =
"IOProviderClass"} = <CFString 0x1564a960 [0x3d0ad0]>{contents =
"IOResources"}
[10:53:44.9192] }
[10:53:44.9192]
[10:53:44.9192] executing /usr/sbin/nvram
[10:53:44.9192] entering format_effaceable_storage
[10:53:44.9192] effaceable storage is formatted, clearing it
[10:53:44.9192] [effaceable:INIT] found current generation, 46, in
group 1
[10:53:44.9192] [effaceable:INIT] started
[10:53:44.9192] [effaceable:INIT] started
[10:53:44.9192] effaceable storaged cleared
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system=/dev/disk0s1s1 data=/dev/disk0s1s2
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s1
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is InnsbruckTaos11B554a.N42OS
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume InnsbruckTaos11B554a.N42OS appears to be
OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
[10:53:44.9192] entering check_for_restore_log
[10:53:44.9192] found restore log (size = 28041)
[10:53:44.9192] entering unmount_filesystems
[10:53:44.9192] error unmounting '/mnt2': Invalid argument
[10:53:44.9192] entering clean_NAND
[10:53:44.9192] NAND format complete
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0 system=
data=
[10:53:44.9192] entering format_storage_for_LwVM
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] unexpected partition 'LwVM' - skipping
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system= data=
[10:53:44.9192] entering create_filesystem_partitions
[10:53:44.9192] User specified system partition size, skipping firmware
extras size.
[10:53:44.9192] system partition padding size is: 167772160 bytes
[10:53:44.9192] unable to open : No such file or directory
[10:53:44.9192] creating 2 partitions
[10:53:44.9192] creating encrypted data partition
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system=/dev/disk0s1s1 data=/dev/disk0s1s2
[10:53:44.9192] wipe entire partition: 1 (old = 0 new = 1749)
[10:53:44.9192] block size for /dev/disk0s1s1: 4096
[10:53:44.9192] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[10:53:44.9192] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[10:53:44.9192] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive
HFS Plus volume with a 8192k journal
[10:53:44.9192] block size for /dev/disk0s1s2: 4096
[10:53:44.9192] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
[10:53:44.9192] executing /sbin/newfs_hfs -s -v Data -J -P
/dev/disk0s1s2
[10:53:44.9192] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive
HFS Plus volume with a 8192k journal
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system=/dev/disk0s1s1 data=/dev/disk0s1s2
[10:53:44.9192] entering mount_filesystems
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s1
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is System
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume System appears to be OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s2
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is Data
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume Data appears to be OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s2 mounted on /mnt2
[10:53:44.9192] entering resize_system_partition_to_options
[10:53:44.9192] User specified system partition size, skipping firmware
extras size.
[10:53:44.9192] Found SystemPartitionPadding value of 167772160 bytes
[10:53:44.9192] Erasing system partition prior to resize operation.
[10:53:44.9192] block size for /dev/disk0s1s1: 4096
[10:53:44.9192] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[10:53:44.9192] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[10:53:44.9192] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive
HFS Plus volume with a 8192k journal
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s1
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is System
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume System appears to be OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
[10:53:44.9192] Trying to resize system partition to 1833959424 bytes
aka 1749 MB
[10:53:44.9192] entering adjust_partition
[10:53:44.9192] partition: requiredSize=447744
[10:53:44.9192] no change in size
[10:53:44.9192] Successfully resized the system partition
[10:53:44.9192] entering maximize_data_partition
[10:53:44.9192] entering adjust_partition
[10:53:44.9192] partition: requiredSize=<<<<<IMEI>>>>>>6
[10:53:44.9192] maximizing data partition to 14020509695 bytes
[10:53:44.9192] entering adjust_partition
[10:53:44.9192] partition: requiredSize=3422976
[10:53:44.9192] no change in size
[10:53:44.9192] Successfully resized data partition to consume free
blocks
[10:53:44.9192] The system partition now has a total HFS+ capacity of
1749 MB
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system=/dev/disk0s1s1 data=/dev/disk0s1s2
[10:53:44.9192] entering unmount_filesystems
[10:53:44.9192] entering ramrod_ticket_update
[10:53:44.9192] looking up root ticket hash
[10:53:44.9192] device tree ticket-hash: <CFData 0x155547e0
[0x3d0ad0]>{length = 20, capacity = 20, bytes =
0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[10:53:44.9192] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
[10:53:44.9192] received valid ticket (2729 bytes)
[10:53:44.9192] entering restore_images
[10:53:44.9192] Successfully marked device node /dev/rdisk0s1s1 as
static data
[10:53:44.9192] executing /usr/sbin/asr -source asr://localhost:12345
-target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
[10:53:44.9192] void AppleUSBDeviceMux::handleConnectResult(struct
BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[10:53:44.9192] void AppleUSBDeviceMux::handleConnectResult(struct
BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[10:53:44.9192] ASR: asr: Unable to disable idle sleep - -536870199
[10:53:44.9192] ASR STATUS: start 241.1 multicast-client
[10:53:44.9192] ASR: Waiting for connection attempt from server
[10:53:44.9192] AppleUSBDeviceMux::handleConnectResult new session
0xa500c6e0 established 12345<-lo0->49167 12345<-usb->60160
[10:53:44.9192] ASR STATUS: setup
[10:53:44.9192] ASR: Validating target...
[10:53:44.9192] ASR: done
[10:53:44.9192] ASR STATUS: metadata
[10:53:44.9192] ASR: Validating source...
[10:53:44.9192] ASR: done
[10:53:44.9192] ASR: Retrieving scan information...
[10:53:44.9192] ASR: done
[10:53:44.9192] ASR: Validating sizes...
[10:53:44.9192] ASR: done
[10:53:44.9192] ASR STATUS: restore
[10:53:44.9192] ASR RESTORE PROGRESS: 2%
[10:53:44.9192] ASR RESTORE PROGRESS: 4%
[10:53:44.9192] ASR RESTORE PROGRESS: 6%
[10:53:44.9192] ASR RESTORE PROGRESS: 8%
[10:53:44.9192] ASR RESTORE PROGRESS: 10%
[10:53:44.9192] ASR RESTORE PROGRESS: 12%
[10:53:44.9192] ASR RESTORE PROGRESS: 14%
[10:53:44.9192] ASR RESTORE PROGRESS: 16%
[10:53:44.9192] ASR RESTORE PROGRESS: 18%
[10:53:44.9192] ASR RESTORE PROGRESS: 20%
[10:53:44.9192] ASR RESTORE PROGRESS: 22%
[10:53:44.9192] ASR RESTORE PROGRESS: 24%
[10:53:44.9192] ASR RESTORE PROGRESS: 26%
[10:53:44.9192] ASR RESTORE PROGRESS: 28%
[10:53:44.9192] ASR RESTORE PROGRESS: 30%
[10:53:44.9192] ASR RESTORE PROGRESS: 32%
[10:53:44.9192] ASR RESTORE PROGRESS: 34%
[10:53:44.9192] ASR RESTORE PROGRESS: 36%
[10:53:44.9192] ASR RESTORE PROGRESS: 38%
[10:53:44.9192] ASR RESTORE PROGRESS: 40%
[10:53:44.9192] ASR RESTORE PROGRESS: 42%
[10:53:44.9192] ASR RESTORE PROGRESS: 44%
[10:53:44.9192] ASR RESTORE PROGRESS: 46%
[10:53:44.9192] ASR RESTORE PROGRESS: 48%
[10:53:44.9192] ASR RESTORE PROGRESS: 50%
[10:53:44.9192] ASR RESTORE PROGRESS: 52%
[10:53:44.9192] ASR RESTORE PROGRESS: 54%
[10:53:44.9192] ASR RESTORE PROGRESS: 56%
[10:53:44.9192] ASR RESTORE PROGRESS: 58%
[10:53:44.9192] ASR RESTORE PROGRESS: 60%
[10:53:44.9192] ASR RESTORE PROGRESS: 62%
[10:53:44.9192] ASR RESTORE PROGRESS: 64%
[10:53:44.9192] ASR RESTORE PROGRESS: 66%
[10:53:44.9192] ASR RESTORE PROGRESS: 68%
[10:53:44.9192] ASR RESTORE PROGRESS: 70%
[10:53:44.9192] ASR RESTORE PROGRESS: 72%
[10:53:44.9192] ASR RESTORE PROGRESS: 74%
[10:53:44.9192] ASR RESTORE PROGRESS: 76%
[10:53:44.9192] ASR RESTORE PROGRESS: 78%
[10:53:44.9192] ASR RESTORE PROGRESS: 80%
[10:53:44.9192] ASR RESTORE PROGRESS: 82%
[10:53:44.9192] ASR RESTORE PROGRESS: 84%
[10:53:44.9192] ASR RESTORE PROGRESS: 86%
[10:53:44.9192] ASR RESTORE PROGRESS: 88%
[10:53:44.9192] ASR RESTORE PROGRESS: 90%
[10:53:44.9192] ASR RESTORE PROGRESS: 92%
[10:53:44.9192] ASR RESTORE PROGRESS: 94%
[10:53:44.9192] ASR RESTORE PROGRESS: 96%
[10:53:44.9192] ASR RESTORE PROGRESS: 98%
[10:53:44.9192] AppleUSBDeviceMux::sessionUpcall socket is closed,
session 0xa500c6e0 (12345<-lo0->49167 12345<-usb->60160)
[10:53:44.9192] ASR RESTORE PROGRESS: 100%
[10:53:44.9192] ASR: Copied 1666908672 bytes in 70.21 seconds, 23184.43
KiB/s
[10:53:44.9192] ASR STATUS: verify
[10:53:44.9192] ASR VERIFY PROGRESS: 2%
[10:53:44.9192] ASR VERIFY PROGRESS: 4%
[10:53:44.9192] ASR VERIFY PROGRESS: 6%
[10:53:44.9192] ASR VERIFY PROGRESS: 8%
[10:53:44.9192] ASR VERIFY PROGRESS: 10%
[10:53:44.9192] ASR VERIFY PROGRESS: 12%
[10:53:44.9192] ASR VERIFY PROGRESS: 14%
[10:53:44.9192] ASR VERIFY PROGRESS: 16%
[10:53:44.9192] ASR VERIFY PROGRESS: 18%
[10:53:44.9192] ASR VERIFY PROGRESS: 20%
[10:53:44.9192] ASR VERIFY PROGRESS: 22%
[10:53:44.9192] ASR VERIFY PROGRESS: 24%
[10:53:44.9192] ASR VERIFY PROGRESS: 26%
[10:53:44.9192] ASR VERIFY PROGRESS: 28%
[10:53:44.9192] ASR VERIFY PROGRESS: 30%
[10:53:44.9192] ASR VERIFY PROGRESS: 32%
[10:53:44.9192] ASR VERIFY PROGRESS: 34%
[10:53:44.9192] ASR VERIFY PROGRESS: 36%
[10:53:44.9192] ASR VERIFY PROGRESS: 38%
[10:53:44.9192] ASR VERIFY PROGRESS: 40%
[10:53:44.9192] ASR VERIFY PROGRESS: 42%
[10:53:44.9192] ASR VERIFY PROGRESS: 44%
[10:53:44.9192] ASR VERIFY PROGRESS: 46%
[10:53:44.9192] ASR VERIFY PROGRESS: 48%
[10:53:44.9192] ASR VERIFY PROGRESS: 50%
[10:53:44.9192] ASR VERIFY PROGRESS: 52%
[10:53:44.9192] ASR VERIFY PROGRESS: 54%
[10:53:44.9192] ASR VERIFY PROGRESS: 56%
[10:53:44.9192] ASR VERIFY PROGRESS: 58%
[10:53:44.9192] ASR VERIFY PROGRESS: 60%
[10:53:44.9192] ASR VERIFY PROGRESS: 62%
[10:53:44.9192] ASR VERIFY PROGRESS: 64%
[10:53:44.9192] ASR VERIFY PROGRESS: 66%
[10:53:44.9192] ASR VERIFY PROGRESS: 68%
[10:53:44.9192] ASR VERIFY PROGRESS: 70%
[10:53:44.9192] ASR VERIFY PROGRESS: 72%
[10:53:44.9192] ASR VERIFY PROGRESS: 74%
[10:53:44.9192] ASR VERIFY PROGRESS: 76%
[10:53:44.9192] ASR VERIFY PROGRESS: 78%
[10:53:44.9192] ASR VERIFY PROGRESS: 80%
[10:53:44.9192] ASR VERIFY PROGRESS: 82%
[10:53:44.9192] ASR VERIFY PROGRESS: 84%
[10:53:44.9192] ASR VERIFY PROGRESS: 86%
[10:53:44.9192] ASR VERIFY PROGRESS: 88%
[10:53:44.9192] ASR VERIFY PROGRESS: 90%
[10:53:44.9192] ASR VERIFY PROGRESS: 92%
[10:53:44.9192] ASR VERIFY PROGRESS: 94%
[10:53:44.9192] ASR VERIFY PROGRESS: 96%
[10:53:44.9192] ASR VERIFY PROGRESS: 98%
[10:53:44.9192] ASR VERIFY PROGRESS: 100%
[10:53:44.9192] ASR: Verified SHA-1 checksum 1666908672 bytes in 8.87
seconds, 183434.91 KiB/s
[10:53:44.9192] ASR STATUS: finish
[10:53:44.9192] entering ramrod_probe_media
[10:53:44.9192] device partitioning scheme is GPT
[10:53:44.9192] find_filesystem_partitions: storage=/dev/disk0s1
system=/dev/disk0s1s1 data=/dev/disk0s1s2
[10:53:44.9192] entering mount_filesystems
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s1
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is InnsbruckTaos11B554a.N42OS
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume InnsbruckTaos11B554a.N42OS appears to be
OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s1 mounted on /mnt1
[10:53:44.9192] executing /sbin/fsck_hfs
[10:53:44.9192] ** /dev/rdisk0s1s2
[10:53:44.9192] Executing fsck_hfs (version hfs-227).
[10:53:44.9192] ** Checking Journaled HFS Plus volume.
[10:53:44.9192] ** Detected a case-sensitive volume.
[10:53:44.9192] The volume name is Data
[10:53:44.9192] ** Checking extents overflow file.
[10:53:44.9192] ** Checking catalog file.
[10:53:44.9192] ** Checking multi-linked files.
[10:53:44.9192] ** Checking catalog hierarchy.
[10:53:44.9192] ** Checking extended attributes file.
[10:53:44.9192] ** Checking volume bitmap.
[10:53:44.9192] ** Checking volume information.
[10:53:44.9192] ** Trimming unused blocks.
[10:53:44.9192] ** The volume Data appears to be OK.
[10:53:44.9192] executing /sbin/mount_hfs
[10:53:44.9192] /dev/disk0s1s2 mounted on /mnt2
[10:53:44.9192] entering install_kernel_cache
[10:53:44.9192] writing kernelcache to
/mnt1/System/Library/Caches/com.apple.kernelcaches/kernelcache
[10:53:44.9192] entering install_secure_vault_daemon
[10:53:44.9192] entering get_hardware_platform
[10:53:44.9192] platform-name = s5l8950x
[10:53:44.9192] linking /mnt1/usr/sbin/securekeyvaultd to
/mnt1/usr/sbin/securekeyvaultd.s5l8950x
[10:53:44.9192] no securekeyvaultd for s5l8950x
[10:53:44.9192] entering ramrod_ticket_write
[10:53:44.9192] writing ticket to
/mnt1/System/Library/Caches/apticket.der
[10:53:44.9192] entering update_device_firmware
[10:53:44.9192] create_baseband_update_options: Got imeisv: 6
[10:53:44.9192] baseband updater options = <CFBasicHash 0x1564bca0
[0x3d0ad0]>{type = mutable dict, count = 3,
[10:53:44.9192] entries =>
[10:53:44.9192] 0 : <CFString 0x1c7238 [0x3d0ad0]>{contents =
"IMEISwVersion"} = <CFNumber 0x15553aa0 [0x3d0ad0]>{value = +6, type =
kCFNumberSInt32Type}
[10:53:44.9192] 1 : <CFString 0x1c7298 [0x3d0ad0]>{contents =
"autoSetupEnv"} = <CFBoolean 0x3d0e88 [0x3d0ad0]>{value = false}
[10:53:44.9192] 2 : <CFString 0x1c72a8 [0x3d0ad0]>{contents =
"disablePing"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
[10:53:44.9192] }
[10:53:44.9192]
[10:53:44.9192] _baseband_update_requires_system_filesystem_once:
querying baseband to determine if it requires system filesystem
[10:53:44.9192] _baseband_update_requires_system_filesystem_once: query
returned <CFBasicHash 0x1564bb90 [0x3d0ad0]>{type = mutable dict, count
= 3,
[10:53:44.9192] entries =>
[10:53:44.9192] 0 : <CFString 0x1c7008 [0x3d0ad0]>{contents =
"requireSystemPartitionMount"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value
= true}
[10:53:44.9192] 1 : <CFString 0x1c7028 [0x3d0ad0]>{contents =
"requireUserPartitionMount"} = <CFBoolean 0x3d0e88 [0x3d0ad0]>{value =
false}
[10:53:44.9192] 2 : <CFString 0x1c7038 [0x3d0ad0]>{contents =
"requireBasebandFSPartitionMount"} = <CFBoolean 0x3d0e88
[0x3d0ad0]>{value = false}
[10:53:44.9192] }
[10:53:44.9192]
[10:53:44.9192] entering update_iBoot
[10:53:44.9192] found 'AppleImage3NORAccess' object in IORegistry
[10:53:44.9192] entering update_iBoot_image3_NOR_access
[10:53:44.9192] write_image3_data: flashing illb data (length = 0x24a1a)
[10:53:44.9192] write_image3_data: flashing SCAB data (length = 0xaf0)
[10:53:44.9192] ticket updated
[10:53:44.9192] write_image3_data: flashing ibot data (length = 0x4518c)
[10:53:44.9192] write_image3_data: flashing chg1 data (length = 0x88cc)
[10:53:44.9192] write_image3_data: flashing bat0 data (length = 0xaa4c)
[10:53:44.9192] write_image3_data: flashing batF data (length = 0x1484c)
[10:53:44.9192] write_image3_data: flashing logo data (length = 0x1a8c)
[10:53:44.9192] write_image3_data: flashing recm data (length = 0xdd8c)
[10:53:44.9192] write_image3_data: flashing dtre data (length = 0x153cc)
[10:53:44.9192] write_image3_data: flashing chg0 data (length = 0x260c)
[10:53:44.9192] write_image3_data: flashing bat1 data (length = 0x80c)
[10:53:44.9192] write_image3_data: flashing glyP data (length = 0xf8c)
[10:53:44.9192] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[10:53:44.9192] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[10:53:44.9192] [nand_part_core:INF@2289] first 2 pages of boot blocks
written with copies of partition table
[10:53:44.9192] entering update_gas_gauge
[10:53:44.9192] entering update_ir_mcu
[10:53:44.9192] looking for mcu nub...no entry from path!
[10:53:44.9192] TiSerialFlasher not supported on this platform. Exiting.
[10:53:44.9192] entering update_baseband
[10:53:44.9192] update_baseband: registering for progress notifications
[10:53:44.9192] create_baseband_update_options: Got imeisv: 6
[10:53:44.9192] baseband updater options = <CFBasicHash 0x1564bc60
[0x3d0ad0]>{type = mutable dict, count = 6,
[10:53:44.9192] entries =>
[10:53:44.9192] 0 : <CFString 0x1c71e8 [0x3d0ad0]>{contents =
"SystemRoot"} = <CFString 0x1564b270 [0x3d0ad0]>{contents = "/mnt1"}
[10:53:44.9192] 1 : <CFString 0x1c7238 [0x3d0ad0]>{contents =
"IMEISwVersion"} = <CFNumber 0x15553aa0 [0x3d0ad0]>{value = +6, type =
kCFNumberSInt32Type}
[10:53:44.9192] 2 : <CFString 0x1c7298 [0x3d0ad0]>{contents =
"autoSetupEnv"} = <CFBoolean 0x3d0e88 [0x3d0ad0]>{value = false}
[10:53:44.9192] 3 : <CFString 0x1c7178 [0x3d0ad0]>{contents =
"forceUpdate"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
[10:53:44.9192] 5 : <CFString 0x1c72a8 [0x3d0ad0]>{contents =
"disablePing"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
[10:53:44.9192] 6 : <CFString 0x1c7198 [0x3d0ad0]>{contents =
"DisallowFusiing"} = <CFBoolean 0x3d0e80 [0x3d0ad0]>{value = true}
[10:53:44.9192] }
[10:53:44.9192]
[10:53:44.9192] update_baseband: querying baseband info
[10:53:44.9192] bbupdater: BEGIN: Querying info at stage first
[10:53:44.9192] bbupdater: BEGIN: Preparing first stage
[10:53:44.9192] bbupdater: Requested boot mode: kBBUBootModeNone
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
5...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
4...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] [nand_part_core:INF@3169] next 98 pages of boot blocks
written with LLB image of size 150080 bytes
[10:53:44.9192] [nand_part_core:INF@3172] final 156 pages of boot
blocks written with random data in full page format
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
3...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
2...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
1...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] bbupdater: Creating transport, attempts remaining
0...bbupdater: FAILED(kBBUReturnIOError)
[10:53:44.9192] bbupdater: END(kBBUReturnIOError): Preparing first
stage
[10:53:44.9192] bbupdater: END(kBBUReturnIOError): Querying info at
stage first
[10:53:44.9192] send_bbupdate_status: sending baseband update status to
host
[10:53:44.9192] update_baseband: bbupdater error: The operation
couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a
communication transport to baseband.)
[10:53:44.9192] 0: RamrodErrorDomain/3ec: update_baseband: failed
querying baseband info
[10:53:44.9192] 1: BBUpdater/3: Failed creating a communication
transport to baseband.
[10:53:44.9192] unable
Hello everyone,
After dealing with this issue for a few days I was able to fix my issue.
The errors that I was getting were 1 and -1 on an iPhone4 upgrading to IOS 7
I read and tried every fix under the sun it seemed.
The fix for me was the DNS cache (even though I tried it on a different computer)
Here is the whole story...
I had a working iPhone4 on iOS6 when I started trying to upgrade to the latest version.
I plugged it in to iTunes and hit restore, after an extremely long DL (slow on my end) it failed.
I decided at that time that I would actually start trying and I unplugged all my other USB and used a real apply usb cable as opposed to my long one.
I also updated iTunes to the latest version and hit the restore button in iTunes again.
After another extemely long DL (because turns out my old verison of iTunes downloaded 6.1.3) I tried again.
Error 1 or -1 depending on which time I tried.
I then checked my hosts file and it was good so I tried disconnecting the battery and hitting the power buton a bunch to drain the power and it still failed with error 1.
After maunally downloading the firmware from ipsw downloader i tried again but no results so I downloaded the alternate version of the software for GSM phones which was the incorrect version so didn't even start before it failed.
Frustrated at this point so I get a netbook and throw a fresh copy of windows 7 onto it.
Update all the drivers and various runtimes then installed latest verison of iTunes.
checked the hosts just to be stupid sure it would work and it was good.
Error 1
So at this point I have waisted two days and I have alreadly replaced the clients phone as "I (meaning apple)" broke it.
So back on my main PC I start from square one and realise that I never actually cleared my DNS cache as it says in many instructions.
So I try that and 10 minutes later I got a brand new phone.
TLDR: Clear your DNS cache in Windows and Mac
Steps I used to fix it
Apple brand charger
back/motherboard usb port
hosts file empty
dns cache cleared
dfu mode
Shift click restore button for custom ipsw file / latest version
To clear DNS cache in Windows hit the windows key or button in the bottom right (windows 7) and type CMD
Right click and run cmd as administrator
type
ipconfig /flushdns
I fixed mine after giving up so don't give up and don't feed the "unplug it" and "hit buttons at a certain point trolls".
Good Luck.
Similar Messages
-
has anyone come accross restore error 53 on an iPhone 6???
Hi, poppyseed83.
Thank you for visiting Apple Support Communities.
I would recommend going through the steps in the article below.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
Cheers,
Jason H. -
Well I fixed the problem of my iphone not coming on by replacing the battery with a new one. But when i turn it on, it freezes at the Apple Logo. I tried restoring it to the latest firmware and i get the restore error 1011. Please help.
any suppport?
-
IPhone Restore Failing at "Verifying IPhone Restore" Error -6
i have an old iPhone 3G that i use for my daughter. i took out the sim card and she could watch movies and play games. it crashed one day so i plugged it into a mac and tried to restore. well it goes through it's processes and gets to "Verifying iPhone Restore" (it completes "Verifying iPhone Software") and stops with an Error 6. I looked at Apple's page here http://support.apple.com/kb/ts1275 and Error 6 has to do with Windows Registry. Well i wasn't using a windows box to restore, i tried it on a 15" MBP, a 13" MBP, and a 27" imac. I have tried doing this over 30 times and get the same Error 6.
Does anyone know of a solution to this? The iPhone is about 2 months out of warranty so i cant send it in without it costing $$$.i took out the sim card and she could watch movies and play games
While you can use an iphone as a touch without a sim card in the phone, you cannot update or restore software without a valid sim card in the phone. The sim card need not be activated(with a carrier plan), but it must be present. So, are you trying to restore without a valid sim card? If so, that's your problem. You need a valid sim card, which is defined as a sim card from the carrier the phone was last locked to or used with. It need not be activated(with carrier plan), but it must be present. -
Hi I am having quite a big problem with my iPhone
I have an iPhone 3G,
It won't switch on, when I plug it into a power source the apple logo appears and then the phone screen goes black after about 30 secs.
I read about a DFU mode or something, when I plug it into my laptop I have to hold down the lock button and home button at the same time and then just the home button.
This works and I get to the restore screen on itunes.
The restore starts but then after it says preparing to restore I get an error '23' code.
I have also tried doing the same thing on my sisters laptop and I get the same error so it is nothing to do with the laptop I don't think.
If anyone could tell me what to do to fix this error then i'd be very gratefull.
ThanksHi Pete,
If you haven't already, try restoring the iPhone on another computer.
Also, try the general tips in this article: http://support.apple.com/kb/TS1275 may resolve the issue.
The iPhone will need service if the issue persists after trying the tips in that article. This webpage: http://www.apple.com/uk/support/iphone/service/faq/ provides answers to Frequently Asked Questions about iPhone service in the UK.
-Jason -
Am tring to restore my iphone and its bringing error 21. I have jailbroken the phone and when i try to restore it starts well then shows the apple logo followed by a message box showing error 21 or 1611. Please help me out my pals.
Discussing of jailbreaking is contrary to the rules of use for this forum
Read
http://support.apple.com/kb/HT3743
https://discussions.apple.com/message/12651297#12651297
You get no help here -
IPhone Restore error (1) and then in DFU, error(2001).
Hi All.
I have an iPhone4 which "needs to be restored". ITunes downloads the software and begins to unpack and restore the phone. The display on the phone is active and the progress bar is incrementing durng the process.
About half way through the process i recieve an error (1) from iTunes. When trying to restore in DFU mode this changes to error(2001).
The device's serial number is unknown (n/a) to iTunes. I am currently travelling and do no have documentation or original packaging with me.
I do not believe the warranty would be valid, and i am unaware of the location of any Apple stores within the region i am currently residing. However, this phone is registered with Apple, would there be a way of verifying this number from my AppleID account?
Is this a lost cause? Or is there a clever boffin out there who knows what i can do about this.
Kind regards and thank you in advance for any light that can shed on this matter,
DanError 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service. -
My phone is telling me that I need to restore it.
I did all the DFU/force restore stuff.
I used multiple computers.
Itunes will give me error message 1002 just before the phone completely restores. Phone is not jail-broken or anything like that.
I've tried to restore my phone at least 10 times to no avail.
What does error 1002 even mean? I'm desperate! Please help!Very similar situation. I my 3gs in the car for 30min. It said that it overheated, but temps where not that hot??? It went in to emergency call only. I tried to restore several times. Called technical service and since it is a bit over a year old I could only get "tips" unless I wanted to pay for advise.
So I tried restore on my mac, on my pc. I have uninstalled/reinstalled itunes. I've turned off virus protection/firewalls. I've done every recommendation and it still spits out error 1002. I'm thinking it is toasted!!!!
If there are any success stories I would love to hear about it!
BTW I updated to iOS 4 only a few days before??? -
First off I have NEVER hacked my phone or jailbird or whatever the term is.
After reading various thread on this issue on this forum it looks like it's not going to get restored.
Hopefully someone reads this and decide to improve and fix this.
Yes I was very happy with the iphone the last 2 years or so that I had it. I really want to get a 4G iphone but I'm really disappointed with this issue.
Message was edited by: Beagle10any suppport?
-
How do I fix this? I've searched and have found no solutions. Please help.
[IMG]http://img51.imageshack.us/img51/8461/95676291.png[/IMG]How about thanks for the reply for starters.
Or how about including the troubleshooting steps you have already tried without success so those who volunteer their time to answer questions and provide help here don't waste their time and yours providing a troubleshooting step or steps you have already tried without success. And when they do because you didn't take the time to include what you have already tried, "of course I have" without a simple thanks, which is called manners especially when you are the one looking for help.
Including with your original post that you are trying to install a previous firmware version than the one currently installed on your iPhone is slightly pertinent information also. -
HT1414 my iphone restore mode tells me i am having a error 14
hi
i am havving a problem of restoring my iphone
it keeps telling me that the restore is not possible due to error 14http://support.apple.com/kb/TS1275
more hits in this google
https://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=iphone+restor e+error+14&oq=iphone+restore+error+14&gs_l=igoogle.3..0j0i30l9.1384122.1389890.0 .1391034.23.12.0.11.11.0.113.829.11j1.12.0...0.0...1ac.67b3Xs48-OA -
HT4623 ipad restore error code3
Hello everyone, I try to restore ipad 4 (3G) to ios 7.1 and (ipad can not be restore,error 3) come up, what is that mean? Now I have a brick ipad. I try to google and found no solution, if anybody know anything about this error code 3 please share it I would very much appreciate.
https://discussions.apple.com/thread/5372052
https://discussions.apple.com/message/24418028#24418028
more
https://www.google.dk/search?q=iphone+restore+error+3&oq=iphone+restore+error+3& aqs=chrome..69i57j0l5.5087j0j8&sourceid=chrome&es_sm=91&ie=UTF-8 -
my iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!
Hey jestinsinclairr,
Thanks for using Apple Support Communities.
After reviewing your post, it sounds like you had one issue and then got a second trying to resolve the first. A frustrating situation for sure. The first article linked has what to do if it is not powering on unless plugged in. The second article addresses the error you are receiving when trying to restore.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694#10
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Have a nice day,
Mario -
I purchased an Iphone 4 in April of 2012. I always keep it on and charge it every night. I have had some trouble turning, a couple of times, in the past. It was simply reluctant to turn on after allowing the battery to be completely expended and has behaved the same way after being manually turned off. I have again allowed the battery to completly die and turn off the phone. This time it will not turn on at all. I have tried various combinations of pressing and holding home and power to no avail. I plugged it in to the computer, but Itunes will not recognize it as my phone. Itunes is labeling it "Iphone" and has requested that I restore the phone in order to use it with Itunes. Itunes states that "has detected an Iphone in recovery mode". I, reluctantly, attempted to restore the phone. After waiting quite a while on a "software update" to download, it said preparing Iphone for restore and then said "unable to restore Iphone, unknown error - 3194". I read, online, that I needed the most recent version of itunes in order to restore. So I upgraded Itunes and restarted the compluter. On the second, and all subsequent attempts to complete the restoration, I am prompted with a message stating "unable to restore IPhone, unknown error - 1600". My computer also attempted, and I believe, successfully, installed new device driver software for iphone4 (DFU mode). Any assistance would be greatly appreciated. Also is my phone, purchased 4/12, under any service or replacement warranty. I truly feel it should be easier to turn on and I did not even want to restore the phone, I just need to use it.
Thank you,
GeoffreyI am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. HELP.
Hi there owain11,
It looks like that particular error may be realted to a hardware issue. Take a look at the article below for more information.
Resolve iOS update and restore errors
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
-Griff W. -
how to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?
how to restore:
http://support.apple.com/kb/HT1414
error code 21 fix
http://support.apple.com/kb/TS3694#error1015
Maybe you are looking for
-
I am from Russia,so can i buy a Macbook pro with retina in Usa or in another country and use it in Russia,with Russian language??? Like iphone you can buy it in Usa without contract and use in other countries,you can select language in iphone,can i s
-
Can anyone tell me what I would use to set the command prompt? On HP-UX, I would reset the PS1 variable... i.e. PS1=" \$ID @ \$HOST | \$PWD --> " On Linux, I would reset it as follows: i.e. PS1=" \u @ \h | \W --> " Neither of these seems to work here
-
How do I export photos to my ipad. I have been emailing one at a time which is very time consuming
-
Windows live messenger disconnection on nokia 6022...
Hi up until recently I could log into windows live messenger on my mobile, now when I log in I get a error 201 and a message say that "you were disconnected from windows live messenger - server initiated disconnect" then asks if I want to connect ag
-
Can you share playlists on iTunes with other computers?
I recently started to share my iTunes library across all my home computers. I have my main libray shared and can view all the music entries. Now I wanted to see if I could share playlists already compiled among these computers.