IPhone 5 reverts back to recovery mode when trying to restore
I took my iPhone 5 into the local mac reseller store. I asked for a new battery and new lighting charging port. I came back and he said he tried a soft reboot and it went to recovery mode. take it home and restore he said. I was mad and said oh well ok. I get home and tried to restore and after downloading and installing, right at the end when it says phone has beed restored and is restarting....then bam...right back to recovery mode with cord pointing to plug into iTunes. Did this many times with same results. I'm thinking he did break into the phone and messed it up and will not cop to it. Any Ideas what to do now????????
Take it to the nearest Apple store and they will be able to get your phone out of recovery mode, if you've tried many times already.
Just as long as your phone isn't jailbroken you'll be ok.
Similar Messages
-
iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
IPhone 5 going into recovery mode when trying to update iOS 7
My 5 went into recovery mode when trying to update to 7.0.2 OTA. At first I was like ok just a glitch. Well trying to update to 7.0.3, it did it again. So right now I am again in the process of restoring and updating my 5.
What is going on?because I'm an idiot.. of course.. All my other over the air updates have worked, I had a good wifi connection, knew I had a backup, and was desperate to get past the initial bugs I've been experiencing..
I downloaded iTunes on my work PC, enough to get it going again, which I bascially had to do twice.. iTunes didn't find a backup and said that iCloud didn't have a backup, even though it did.. So, it did a basic install of iOS 7.. I then erased all settings from the iPhone itself and when it restarted I chose to restore from iCloud which the phone was able to find..
Have not seen anything better.. I've had a couple random reboots. Once when swiping the Starbucks notification on the lock screen, the phone immediately crashed back to the apple boot screen. -
My iPhone 5 went to recovery mode when trying to install update 6.1.4
A couple of hours ago, I got a prompt on my iPhone 5 to install update 6.1.4 over wifi (for the speakers). I turned on wifi in phone settings and clicked install and saw a tiny message saying 'Verifying, ..'
The next thing I saw was a symbol for connecting iphone usb to iTunes. When I did, Itunes said that my phone was in recovery mode and needed to be restored. Trusting that Apple would know what it is doing, I clicked okay, but stopped short of actually resoring when itunes warned me that my data would be lost and phone will be restored to factory settings. Data is everything!!!
I have important family pictures that haven't been backed up and I don't want to lose them. What do I do? It would have been so much better had Apple update warned me to backup before starting update. iPhone does not even turn on now. Help please!!! Very disappointed in Apple. Their own updates should not crash their own devices, and without any warning of data loss whatsoever.
Apple has become a big bully!!!
Please Help..firstly dont panic my friend.. if your phone is not turning ON, try a hard reset
Press and Hold down the Lock button [wch is on top] and the Home button...hold both of em together for 10 secs or till the time you see tghe apple logo
once you see the apple logo release the keys the phone will come back to life
if you find the the handset is in recovery mode you have no other option but to restore the device. Sorry but tht is the only thing you can do. good luck -
My iphone is stuck in recovery mode when trying to update to ios 5.
hello, im asking for help because my iphone 3g/3gs (not sure) went into recovery mode after attempting to update to ios 5. now the thing is that.... i need to restore it because its my only phone and im still paying for service. but the point is that i want to restore it so i can use it again but instead iTunes is giving me error 3194, which means my phone is not eligible for restore? i just want to restore it so i can deactivate it and use it as an ipod. all help appreciated!
Open iTunes. plug in your iPhone to the usb-port while holding the home button pressed. Your bricked phone should now show up in iTunes.
-
How do i get my iphone 5 out of recovery mode after trying to install ios 7
Alright, so i tried to install ios 7 and i got an error saying that the ios 7 update got a problem and so then my phone went into recovery mode. i installed tiny umbrella to get it out of recovery and it worked, so then i tried to install ios 7 again and it got another error this time my phone had already been switched to the ios 7 format but was not completely done, so my phone went into recovery mode again. so i tried tiny umbrella again and it just kept going back to recovery mode. i tried to restore my phone after trying to look for another way to get my phone out of recovery mode and i got nothing so i decided to restore my phone and i then get another freaking error saying that itunes could not restore due to a problem, then i just decided to try tiny umbrella one last time and it didnt work. so i tried to restore again but now my phone is not being detected on itunes so i cant do anything, and my phone is stuck in recovery mode... all i was trying to do is get the new update and now my phone is dead, it wont do anything please help!!
Use tinyumbrella. Connect your iphone, click on the random string of numbers that appears in the recover devices window, and click "exit recovery". That solved my problem, and it may solve yours. Give it a shot.
-
my 2g iphone is stuck in recovery mode after trying to restore it with the latest itune version. It does have a sim card but is not connect it ,I was only using it with wi-fi. Now i-tune will not connect it only show i-phone. I did manage to restore it again ,but then it will go back to restore mode.
What shall i do now?
ThanksRestore ?
How ? -
Iphone 4 in recovery mode when trying to update it to the last version and I will not update it because I don't want to lose my information
my operating system is the before last oneOpen iTunes. plug in your iPhone to the usb-port while holding the home button pressed. Your bricked phone should now show up in iTunes.
-
I have tried every trouble shooting step there is. restarting my computer amd restarting my device. It died while i was at work and when i went to plug it into my car charger all i saw was the apple logo coming and going. so when i got home i put it in recovery mode and tried to restore and I got Error 2001. I have no idea what to do.
Visit an Authorized Apple Service Provider or Apple Store to get it checked. If they can't fix this, you'll have to pay the Out-Of-Warranty-Service fee to get a new replacement for a reduced price:
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Service Answer Center - iPhone -
My iphone phone is in recovery mode after trying to update and sync in order to remove photos from it on to my macbook. How can i restore without losing the photos?? please help i dont want to lose them!!
Try holding the home and lock button at the same time and see if it'll restart. If you see the apple logo, let go and wait till it goes to the lock screen and your good(:
-
After updating to itunes 10.4 restarted my pc windows 7 64 bit, my ipod touch 3rd gen went into restore mode,when trying to restore it works for several minutes then says it cannot be restored, unexpected error occured (1604) I have followed the reslution checklists, still wont work, any thoughts?
Hi
Cannot offer any thoughts other then i am having the same problem. updated my itunes windows7 32bit ipod touch 4th gen. went into restore mode lost over 700 songs. i dont get any error messages i just cannot get into itunes store. Firewall is allowing access, etc resolution checklists done, and nothing.
Hopefully this issue is fixed up soon... -
My iphone is stuck in recovery mode and i can restore it an error keeps coming up?
My iphone is stuck in recovery mode and i cant restore it every time i try to an error comes error 2005 or 11 or 3194.
That often indicates a hardware failure. make an appointment at the genius bar and take it in for them to look at.
-
My iphone 3gs brings error message 1602 when trying to restore
My iphone 3gs brings error message 1602 when trying to restore factory default
See here > Check USB connections
-
Phone worked fine all day...charged it and it went into recovery mode. Tried to restore it on 2 different macs and received error 29 message. Any suggestions?
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Then...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
HT201263 iphone 4s stuck in recovery mode after trying to download ios6
My iphone is stuck in recovery mode and when I try to restore it, it seems to download the new software (ios6) but nothing is restored. I still get that recovery screen. How can I get out of the recovery mode?
Hey Justinjoly,
Thanks for the question, I understand how frustrating this may be. It sounds like the update process may have been interrupted, and to resolve the issue, we’ll need to restore your device in recovery mode with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
ReportClientDocument object model, simple question
How can I modify report in runtime using RAS SDK (ReportClientDocument obj model)? I tried several different ways to modify report (change date format of the field, change field width...), and nothing happens. all properties seems to be changed but,
-
Hi all, I need to list the whole price changes of a material that we purchased from suplliers. How can i get these data, ie from which tables? Thanks in advance. deniz.
-
Infoset query with cero values
Hi I have an infoset query that reads the information from an infoset. The infoset query is able to read the values, because it shows me values, but everything is cero, although I have values different from 0. But if it didn`t find values it would te
-
@include of file in parent direcory fails in .war files
[WLS 6.0 SP1] I have a .jsp with a line of the form <%@ include file="../include.inc" %> It works fine when the web application is deployed as an exploded directory structure. However, on a .war deployment (whi
-
I have a bunch of flash interactions that I need to publish out to an HTML5 format to play on iPad. I'm currently using CS4 Professional. Is there anything I can do to be able to avoid having to redo these in another tool? I need to be able to publi