Iphone 5's sensor has a red light

Pease help....
Is anything wrong with my sensor?
It appears everytime I unlock my apple.
If I upgrade to iOS 6.1.4, will it appear again?

Hello. It's nothing to worry about. It is the proximity sensor which seems as if a red light is lit, though it isn't a light but just a colour which glows like Radium. It is nothing harmful to the iPhone nor is any sign of danger from the iPhone. A proximity sensor works when you bring your iPhone close to the ear, it makes the screen turn off while you are voice calling to save battery. It happens in all the iPhone and your iPhone is not the only one. Thank You!

Similar Messages

  • I am using a iPhone 6 but it has got red screen

    I am using a iPhone 6 but it has got red screen. Pls suggest to fix it.

    Hello sarzinafromnew york,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you only see a red screen on your iPhone, please follow the steps outlined below.
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    Have a good one,
    Alex H.

  • My macbook pro It has remained without sound and the connector has a red light

    my macbook pro It has remained without sound and the connector has a red light. The analogic sound doesn't work. Thanks for your attention...

        Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    Best.

  • HT2494 the sound won't work on my Macbook pro  the headphone port actually has a red light coming from it

    Can not get sound on my Computer.  The headphone port actually has a red light coming from it.  Help

    Insert a headphone jack and remove it and see if the light goes out. The red light indicates the switch didn't switch from head phone to your Mac's speakers. Some folks have actually used a match stick to undo the switch.

  • My blackberry curve 8530 has a red light, then reboots itself a bit then turns off and keeps doing that repeatively.

    my blackberry curve has a red light and reboots itself a little bit then the screen goes black and it keeps doing exactly that. the computer doesnt charge it because it cant considering it doesnt fully reboot itself. please please please help.

    Did u try charging it from a wall charger, it sounds like its battery is dead.

  • Large outside Junction/Control box has flashing red light - bad or normal?

    There is a Verizon outside box that is large with a flashing red light on its side.  It appears to be a junction or control box mounted on the ground.  It has been there for years and I do not remember seeing a flashing red light until now.  Plus, my DSL connection has been dropping recently.  Can a tech rep from Verizon High Speed Internet answer?  Thank you for yur patience.
    Solved!
    Go to Solution.

    These boxes are called Remote Terminals, and yes it is for DSL.  The flashing light probably means that the battery backup has failed, so it shouldn't really affect your DSL unless your power goes out.  And even then, the battery backup is only to power the voice line to make calls.
    I would call 1-800-VERIZON and choose the option about "repair."  I've had luck with getting poles replaced/repaired that way.  Say that there's a flashing red light on the remote terminal, give the street address, and also give the central office you're out of (IE, your area code and first 3 digits of your phone number should tell the rep where you are).  Also, stop by it and see if you can find any writing/markings on that, and tell them that too.  Be as specific as possible.  Make sure you get a ticket number from them, and make sure they have a call back number.
    There was a tree laying on a wire near me, and I made sure I got a repair ticket; the next day a tech called me to say he was headed out that way and asked specific details about the location, what was wrong, etc.   A few days later the tree was gone.

  • My iPhone wont turn on has a red battery cell when charger plugs in

    My iPhone 4 stopped working a week ago I just tried turning in on again
    Now it is showing some life a red battery cell come up and a lighting bolt but won't turn on any ideas

    Charge it for at least 15 minutes with the wall charger (NOT a computer). Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. If you charge with a computer charge for at least 1 hour.

  • "Itunes helper is not running"  has a red light on under the Support services catergory of device connectivity test during Diagnostics check

    When I ran the itunes Diagnostics Test for my new  ipad, I had one test result that had a button in front of the test name, which was red.
    The test was in the Device Connectivity Tests Portion, under the Support Services Category, Titled " itunes Helper is not running ".
    What does this mean and how can I correct this situation, so the itunes helper is running?
                    Thank you    vtdubu

    When I ran the itunes Diagnostics Test for my new  ipad, I had one test result that had a button in front of the test name, which was red.
    The test was in the Device Connectivity Tests Portion, under the Support Services Category, Titled " itunes Helper is not running ".
    What does this mean and how can I correct this situation, so the itunes helper is running?
                    Thank you    vtdubu

  • Why does my iPhone 5c have a red light on the top of it

    my iPhone 5c has a red light on the top of it next to the speaker but it is only visible at night, it's really scary

    It's the proximity sensor.

  • Headphone jack has red light

    The output (headphone) jack on my MacBook has a red light in it and I can't produce any sound from my built in speakers. Also, I cannot control the volume level; it shows the volume maxed out, but all the slider controls are greyed out and, using the volume buttons, shows a crossed out circle instead of the speaker icon. If I have headphones or speakers hooked up everything works fine, but if not then I can't use sound. Any ideas?

    There is a micro switch that can get stuck....use your headphone plug and try plugging and unplugging it several times.....there have been numerous threads about the problem...you might also try using 'Search Discussions'...enter 'Red Light'
    and Welcome to Apple Discussions

  • IPhone Liquid Submersion Sensor and Dead Pixels

    Today I went down to my carrier HQ. (Singtel, Singapore).
    I went to spoke to the person at the iPhone servicing counter.
    He told me that my iPhone Liquid Submersion Sensor has been triggered and it's now out of warranty.
    And my purpose is there, to have my iPhone exchange as my home button is getting unresponsive at times.
    And he told me that this is under Apple policy. When I purchase the phone, the salesperson didn't even told me about the policy and I wasn't aware of that.
    So the main point is my iPhone Liquid Submersion Sensor and I didn't even drop it into any liquid, I don't know why but it's just unfair for me as an end user.
    Question here, will playing apps like Ocarina activate the iPhone LSS? Only my bottom LSS is triggered, the top one isn't.
    Also to recall, at the point when I'm buying my iPhone 3G last year, out of the box there is already a dead pixel and the person refuse to change a new set for me.
    I'm in need of an iPhone urgently, anybody can tell me what to do?

    Ocarina could trigger the water sensor since you could spit into the dock connector while blowing into the mic.

  • 250GB USB External HDD - Red light then blue flashing

    Hi All,
    I have a Toshiba 250GB External USB HDD thats just stopped working. It has a red light with a regular blue light thats flashing.
    I cant access the HDD anymore in my computer.
    Any ideas?
    Help much appreciated!
    Whiley

    Sorry but I do not use this HDD and cannot offer any help.
    For driver check http://eu.computers.toshiba-europe.com > Support & Downloads.
    Under Product type choose OPTIONS and under Family DRIVE DEVICES.

  • Red light on 8800

    My 8800 has a red light on constantly, other phone works well

    Maybe you have a new message or something like that.
    The red light is an advice.
    Your phone is working? 
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • Red light on lower controller

    Hello Everybody,
    I need help on this. The lower controller on on of the Xserve raid has a red light and says failure on raid admin. Firmware is 1.5/1.50f. Everything looks like it's working fine, read/write and no dropframes so far. What should I do? Should I replace the controller? Reseat it? Will I lose all my data?
    Please advise.
    Thanks,
    Helmut

    Sorry, wrong forum.
    Thanks,
    Helmut

  • My BB won't turn on the red light flashes and the key's light up

    Hi
    I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer.  The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on.  I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy.  I have only had this phone since July last year.  I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
    Louise

    Hi,
    The way you presented it made me think it had just happened.
    So you have had the phone since July has it ever worked?
    Most likely you are missing some or all of your device OS and you'll need to reload the device.
    Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
    Thanks,
    Bifocals
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Maybe you are looking for

  • Windows 8 - After Effects - Mac20/08/14 1:55 PM

    Hey all, Background I have just recently purchased a new PC with Windows 8. Previously I had been working off an apple MacBook pro. My system for working on videos has been from the RAW footage to import into After Effects apply a color correct among

  • Why is the shipping so long?

    I looked at the product for the IPod 30gb 5g the product is called Speck ToughSkin Case for iPod (Black) and im wondering why the shipping is 2-4 weeks.

  • Photoshop CS6 on Windows 8 gives Configuration Error 16 when launched

    I am completely at a loss as to correcting this issue. I installed Windows 8 a few weeks ago and everything went smooth. Ive been using Photoshop CS6 (as part of Creative Suite CS6) with little to no problems until a few days ago when I started recie

  • Smartforms Extra zero printing

    Hi all, I am printing  a field of type quan with length 13 and decimals 3.On debugging ,it contains the right value but the layout contains an extra zero in the figure. Example if the field contains the value 1500.000 while debugging , it prints 1500

  • Extending the customer to another division

    I am new to SD.....My client requirement is according to the division they select in sales order they should automatically get the payment terms...for one customer.... I got the solution that by extending the customer to another division we can solve