IPhone 5 says after some time No SIM
Hello ,
I got my new iPhone from the T-Mobile support center,
My iPhone was normally turning on and I set every thing up.
After this day my iPhone says No Sim so I reboot and nothing happend so I must remove my SIM and put it back in.
It is very annoying...
Who can help me?
Kind regards Huib
P.S. Sorry for my bad English. I'm Dutch
I bought my first iPhone today, an iPhone5. I had 10 hours with it before I received the "no sim" error. I have tried everything recommended on support site other than restoring the phone ... Over 200 contacts I don't want to lose. I have 14 days to take back the phone if problem persists after another visit to the Verizon store tomorrow. This is very disappointing. It seems that this is not a rare problem and I am concerned about getting stuck with a lemon.
Similar Messages
-
I update my iPhone in iTunes, and after some time, opened a window saying "rosolvendor conflict" and asking me to choose, giving me two options, showing the name of a friend who also has an iPhone.
Can anyone help me?Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now. -
i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please help me
That would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards. -
i wana restore my iphone 3g but when i restore it with itunes after some time is say '' iphone could not restored unknow error 1015 '' help me please
99% because your iPhone was hacked/jailbroken. We cannot help you, see terms of use.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state. -
i have installed sim card but while settinng up ios 5.1 when i chose connect to itunes after some time it shows no sim card installed
qaziahmad2010 wrote:
i have iphone 3gs i restored it and now it is not activating ...
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?
How can I delete EVERY THING off my Mac and have it like new?
Boot from the software install DVD and do an "erase and install" when prompted. -
Hi,
I have an Iphone 3G.
Its 9 months old mobile and it has OS 4.2 in it.
When I am accessing wi-fi, suddenly the display went-off and then I was not able to start my phone again.
Later I tried to restore and update the Iphone using Itunes.
I have updated the Itunes.
Using hard-reset, I tried to restore the OS and did the same successfully.
After installing the same over my Iphone 3G, I didnt recieved any intimation for completion of the process, besides, I was not able to start the mobile even I have reset the OS.
when I push the wake-up button, I am able to see the Apple Logo and after some time, it goes off and remains idle with no more display.
I tried to reset OS twice, it remained the same.
Can any one help me here with this issue.
I am not even able to figure-out the cause of the problem.
Thanks in advance.
Bharath.Hi,
I have an Iphone 3G.
Its 9 months old mobile and it has OS 4.2 in it.
When I am accessing wi-fi, suddenly the display went-off and then I was not able to start my phone again.
Later I tried to restore and update the Iphone using Itunes.
I have updated the Itunes.
Using hard-reset, I tried to restore the OS and did the same successfully.
After installing the same over my Iphone 3G, I didnt recieved any intimation for completion of the process, besides, I was not able to start the mobile even I have reset the OS.
when I push the wake-up button, I am able to see the Apple Logo and after some time, it goes off and remains idle with no more display.
I tried to reset OS twice, it remained the same.
Can any one help me here with this issue.
I am not even able to figure-out the cause of the problem.
Thanks in advance.
Bharath. -
i connect my iphone 4g on charging after some time it is complete dead and very heat up please help me.
helllllllllllllllllpppppppeeeeeeeee meThere is no such thing as an iPhone 4G.
-
Dear Sir,
I have Ipone 5S and frequently iphone screening of automatically and again it start after some time..The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Malvinfromny wrote:
... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
Hi, since I've bought the iphone, my facetime never works, I just can't activate the facetime in settings, when I put it on, after some time, the phone shows the message: activation unsuccesful. Do you guys know what should I do?
Where are you, what network are you on and where did you get the phone?
If you are on an unsupported network, Facetime may never be able to activate. If the phone originated in a different country, facetime is probably trying to send an International text message to activate. If you don't have International text messaging, it will fail. -
when i charged my iphone on y pc after some time showing charger not supported with this accessory what have to do to solve it
If you did not do a reset of your iPod please try that (you will not lose any data)
Reset iPod touch: Press and hold the On/Off button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If this does not work inspect the opening in your iPod where the cable connects. Look for any debris and clean it (a magnifying glass may be required). -
Urgent : MDB stops listening to the queues after some time !!!
Hi,
I am using OJMS with OC4J 10.1.2 and db 9.2.0.5. I have a web application which send messages into the queue very frequently.
But the problem is the MDBs stop listening to the queues after some time (1-2 days) and no more messages will be dequeued from that point.
All these messages will move to the exception queue after their expiry.
But the dequeing agains resumes after restarting the OC4J !.
I guess, at some point mdbs are either becoming busy (locked ) or some exception occured while dequeing, hence they stop listening to the queues.
Please throw some light on this issue as it is very crucial in my project.
Regards
PrashanthI've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen. -
GPRS services suddenly stop working after some time abt 4 hrs.Airplane on off solves it
I am using a factory unlocked iPhone 4 GSM in India. Iam currently using it on airtel network 2G services i.e GPRS services. Now the problem I have noticed is that the GPRS services suddenly stop working after some time say about 4 hours. Then what i do is to turn airplane mode on and then off or restart the phone and GPRS starts working. Agan after some time I have to repeat this exercise. Please help soon. This is happening since the time i bought this phone i.e from past 20 days. I have tried allpossible network settings and resetting network but nothing helped. everything else is working perfect.
Hi Syed,
I have also started facing the exact same problem since the past few months with my docomo service.
Earlier, EDGE / GPRS used to work just fine from my workplace where the network was good.
But recently, I got my iphone replaced, due to a network problem, from an apple store in indianapolis, and also upgraded to ios 5.....so not sure now whether this intermittent EDGE / GPRS outage is due to the new hardware or the new OS.
Did you upgrade to iOS 5 and did it help?
PS: iOS 5.0.1 also doesn't seem to be helping, I still need to restart the phone to get EDGE / GPRSt to work.....will try out the airplane mode thing....at least that shouldn't take as much time as a full reboot.
Regards,
Hemant -
i just brought a apple protection plan as my phone warranty is going to end in a day, after entering the protection plan code and my phone serial no its showing an error message "technical error try after some time", is there any solution for that?
As i need the warranty to extend for another year please help me regarding this issue.
When i bought a new iphone5 in Inda after using it for three days lock button was not working properly and it was warranty claimed and exchanged from apple service center in India, for the same phone I want to extend the warranty but its showing a error message is there any solution?Here is some information on the applecare +:
http://www.apple.com/support/products/iphone.html
It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error. -
Why new contacts are not appearing after some time?
I Am using iPhone6, iPad New and iPad mini. The contacts which I saved in iPhone are not appearing after some time. I don't know whether it is related with synchronisation of other devices. Please help me if you know the reason.
Hi,
Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts.
What are your thoughts about this forum? Let us know by doing this short survey.
Maybe you are looking for
-
Hi: I know this problem is not directly R12 related but this is for the R12.1.3 job. I have tried to google and fix all this afternoon but cant get it fixed. I always get help from here for EBS problems so I want to try it here and hope you dont mind
-
my parents using a pc cannot access our pictures uploaded using the aol browser - is web gallert not compatible with the aol browser? o
-
How to Display Formatted Text IN ALV Column?
HI experts , I am displaying ALV with Multiple Column's , One of the Column is TEXT(Fomatted text). When ALV is Displayed TEXT Column Comes as Continues TEXT . and is Not Formatted . Now when i want to edit this text i am Calling another View whic
-
RBAC check fails Security Constraint Not Enforced
I configured a simple WAR to ony allow a specific role to be able to execute my Helloworld url. Now it appears that any valid user defined on the appserver can access the url. Shouldn't it be limited to the specific role i defined using the deploytoo
-
I have a DVD made by iDVD which has four slideshows where each slide has a caption. I want to make these play continously in a standalone display. At present someone has to select the next slideshow when the menu comes up. I either want to play each