Iphone 5 screen is stuck on itunes logo and USB cable?
iPhone 5 screen is stuck on iTunes logo and USB cable. Reset does not work.
Place your device in recovery mode as explained here:
iOS: Unable to update or restore
Similar Messages
-
HT1414 Ipad stuck with Itunes logo and USB cable picture ??
Hello to all,
My ipad is stuck with the iTunes logo and a picture of a USB cable with an arrow.Itunes is not recognizing my ipad, How do I get past this?Not sure what the Script is in the previous reply, but perhaps it referred to the following kb's
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS3281 ( note the link on the bottom on "restore" , use it if necessary).
You can also do a search online, or on this forum, on "dfu mode" if the above doesn't work. -
i was trying to update my iphone 3gs to ios 6 and then on my iphone screen comes up with a itune logo and usb cable i tryed turning it of conecting it back to the computer and notting happens what do i do how do i fix this problem
mine has done the same thing. itunes isnt even recognizing that my phone is plugged in.
-
tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!
I tried connecting to iTunes and neither the PC nor iTunes recognizes the device. I went through all the troubleshooting on the Apple website for this issue and nothing worked. I've reinstalled iTunes, the driver, everything and still can't get either the PC or iTunes to recognize the phone. I don't know what else to do :-( any help or suggestions are highly appreciated!
I would hate to have lost all my info, especially contacts and calendar items since I have no idea what was backed up prior to the phone getting locked on this screen. I've been told that my only option is to go to the phone carrier and they will reset it for me, but that means it will wipe out all the info.
I hope someone has a fix other than that one. -
HT201412 my Ipad screen is stuck with Itunes logo and wont repsond
my Ipad screen is stuck with Itunes logo and wont repsond
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
while opening my iphone 4 it shows itunes logo and usb cable and stucks there, while opening my iphone 4 it shows itunes logo and usb cable and stucks there
It's in recovery mode. Plug it into your computer running iTunes and restore it.
-
I tried on two Windows Computers to install the new iTunes update on my iPad. Now I am stuck at the iTunes Logo and USB cable graphic.
I tried all the standard reboot stuff. Battery is fully charged. Everything seemed to go well until the very last moment.I am sorry.
I did confuse the iTunes part. I have the latest version of iTunes on both my Windows Laptop and HP PC.
Actually that was the problem.
I successfully updated the new Apple iOS to my iPhone and iPad2. I successfully downloaded (backed-up) my data from my iPhone and iPad to my Laptop.
I successfully updated my iPhone with the new iTunes (version 11) I believe.
THIS IS WHEN THE TROUBLE STARTED.
When I tried to update iTunes on the iPad --- all h**** broke loose. After about 80 tries with just the iTunes Logo and USB graphic showing up on the iPad (including two DSU sessions), I still get a 3014 error.
I have disabled all of my security on the Windows PC (imagine how I feel about that!!!!) and still to no avail. I have tried about 80 times in the last 2 days (no exageration) trying all methods, scouring the NET and Apple Help and still I cannot get past Error 3014.
I was on the Apple Care with two Apple "experts" on the telephone (including a Manager) for over an hour and they walked me through (the same stuff I had tried about 60 times). I still get Error 3014.
I HAVE NOT PROBLEMS with my ASUS Transformer TF300T to access its cloud, its updates, its store and its apps. If Google can do it (work with my computers) why cannot Apple?
Seeing "Error 3014" in my iTunes is so OPAQUE!! My god, I am a sophisticated user ... what is a Newbie supposed to think?
Apple is still in the world of Nerds and Geeks (no offence, I am a Geek too!!). It needs to recognize and by-pass these opaque traps and work with real people who are now the bulk of Apple users.
The bottom line is this... all instructions, help files, responses to my pleas for help all say the same thing: iTunes SHOULD be able to restore your iPad. NONE mention any solutions to by-pass Error 3014 in any simple, practical manner. How is a Newbie supposed to disable his/her firewalls, anti-virus, etc? Too complicated.
James Dean Waryk
<Personal Information Edited by Host> -
Tried updating software but now frozen with itunes logo and usb cable picture on screen help
Tried updating ipod software, now frozen with itunes logo and usb cable picture on the screen. Computer will not reconise it
- If ou can turn the iPod off, then see if manually placing the iPod in Recovery mode will allow a restore. Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If it always remains on let the battery fully drain. After charging for at least an hour try a rest and restore. -
I just tried updating the most recent software on my 3GS (on my Mac) but it said the updated on my phone failed. Now my phone is frozen and only showing the itunes logo and USB cable. When I connect to the USB lead, its says: iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.
Have I lost all the data on my phone?
What should I do?
Help!
MThe iTunes logo and cable indicates that your iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
For the 3004 error code does the troubleshooting for it on the page that you posted from not help ? -
upgraded to ios7 iphone now displays itunes logo and usb cable will not restore, will not restart
Hi there emynona,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
Plugged in my Apple tv to tv and light flashing non stop.Tv screen showing iTunes logo and USB cable.Not responding to anything
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
My iPad has the iTunes logo and USB cable on the screen. Can I still back up my music and photos?
My iPad has the Itunes logo and USB cable on screen. Can I still back up my files?
If you haven't already done so, its unlikely.
You can try holding both the home and power buttons at the same time until the apple logo appears on the screen, then let go. -
After I upgraded my iPad 2 to 6.1.3 I now have a itunes logo and USB cable showing. What has happened? What do I do to get by this. I can not shut the iPad down at all.
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
HT201412 it shows itunes logo and usb cable with arrow after that it switch off itself
iPAD shows itunes logo and usb cable with arrow after that it switch off itself
If the Restore doesn't work, force your iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
TS1702 cannot restore the phone on the screen just show itunes logo and USB cable
cannot restore the phone while trying to download the ios 6
the screen shows only itunes logo and USB cableplug your ipod into itunes...it may not do anything plugging it into your own itunes so you may want to try plugging it into someone elses to save the trouble. I had this same problem last week plugged it into my dads ipod and it worked (:
Maybe you are looking for
-
I cannot connect my iPod touch to iTunes
There are several factors preventing me from connecting my sister's iPod Touch to iTunes on my computer (the same one I used to set up her iPod): 1. The sleep/wake button is jammed, or just doesn't work. The button ITSELF feels fine. It pushes down
-
Cannot make a stroke on CS2 for mac
Hello, i'm making a document made up of several images imported from photoshop (copy/paste). When i try to make a stroke in each object nothing happens. I can select the color thickness but the object looks the same...the align strike feature is the
-
When using iphoto to e-mail photos the resulting e-mail doesn't show up in sent folder of mail.
There seems to be a an incompatibility within iphoto when you share images from within Iphoto using Apple Mail. The e-mail seems to send fine but when you try to go back and look for it in the sent folder of mail, it isn't there.... Also, when the re
-
Help, when i print from my Officejet Pro L7680 All-in-one, lines go through my printed pages. Why? Do I have to change the printer heads or is it something more?
-
Hi all. I've been using GB for a few years now. I love this program. In my projects I felt like I needed a little more power so I upgraded to Logic Pro about a year ago. This program is so huge that I got my hands on a DVD video tutorial set by MacPr