Iphone 5 screen wont unlock

My iphone 5 screen wont unlock even after rebooting and restoring the software through recovery mode. Had been to a apple service centre, was told that there is something wrong with the display and the phone needs to be replaced. as my phone is out of warranty i need to pay 21K for the replacement. What do i do?

bk_bmc wrote:
My iphone 5 screen wont unlock even after rebooting and restoring the software through recovery mode. Had been to a apple service centre, was told that there is something wrong with the display and the phone needs to be replaced. as my phone is out of warranty i need to pay 21K for the replacement. What do i do?
You've already been told what to do.

Similar Messages

  • HT201406 my i phone 5 screen wont unlock. The slide to open wont open the phone.  Cant turn it off because you have to slide the button across as well

    my i phone 5 screen wont unlock. The slide to open wont open the phone.  Cant turn it off because you have to slide the button across as well

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • IPhone 5 screen wont turn on. (Need help or info, please and thank you.)

    So i got an Iphone 5, and i accedently droped it in the sink. i took it out, whipped it off,  i put it in my pocket and left it alone.
    the next day the screen was not working, moments later, it(Iphon5) turned off.  tried turnng it back on but it wouldnt work.
    so, again i left it. everything still works, its just that the screen wont turn on, i could still play music snapshot stuff,
    but my screen wont tun on.
    I NEED HELP.

    I don't beleive this is a known problem and you should probably bring your phone to a local Genius Bar (make an appointment here) as this is likely a hardware issue (a problem with your phone realizing that you removed it from your ear).
    If you're willing to tinker with it a bit, you can determine if this is a software issue by backing up your iPhone (separately ensure your photos, videos and music is backed up) and then "Restore" your phone. If the restoration solves the problem, you're dealing with a software issue. If the problem still exists, you're almost definitely dealing with a hardware issue.

  • The screen wont unlock and then it went black

    The screen wouldnt unlock ,then it went black,and its still talking.

        Hello bsp123. That certainly sounds odd with your 4s. This definitely shouldn't be happening. Have you tried performing a soft reset by holding down both the power and home keys, simultaneously for about 10-15 seconds? This can help clear this issue up! Keep us posted!
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • IPhone 4 screen wont go to sleep when using the phone. Plz help

    hello
    when using my cell phone the screen wont go blank. this came out of nowhere and its been happening for about a month.
    i dont have a screen protector or a phone protector either. i reset the phone. restored the phone. turned it on/off about 10 times already and nothing.
    plz help. thanks

    The proximity sensor is above the receiver. Hard to see on the black model, but if you look at the white one, you'll see the hole in the glas they left open for it. It can't be fixed by users, get it serviced. Apple - Support - Service Answer Center

  • IPhone 5 screen wont turn back on after making a call.

    When I put my phone to my ear, the screen turns black, like it should, but once I'm done, it wont turn back on... It does the same thing with siri. I active the raise to speak option and the screen turns black when I do it. I then have to press the sleep button two times to get to my lock screen. Is this an hardware or a software problem? If it is software, can an upcoming update fix it?

    I don't beleive this is a known problem and you should probably bring your phone to a local Genius Bar (make an appointment here) as this is likely a hardware issue (a problem with your phone realizing that you removed it from your ear).
    If you're willing to tinker with it a bit, you can determine if this is a software issue by backing up your iPhone (separately ensure your photos, videos and music is backed up) and then "Restore" your phone. If the restoration solves the problem, you're dealing with a software issue. If the problem still exists, you're almost definitely dealing with a hardware issue.

  • My Iphone 5 screen wont turn onj

    When i was trying to open an app the screen went black and then the folder screen (where all the apps are) came on and i pushed the ome button and then the screen just turned off. My Iphone 5 is on, working, i can hear all the notifications when they hapen, but my screen won't turn on. My lock button is broken so i cant reset the phone, or turn it off.

    Hold the sleep/wake and home button at the same time for about 10 or 15 seconds. (Its a hard reset) the apple icon should come on

  • Iphone 4s Screen wont turn on? after I downloaded an app

    Hi there, I just downloaded an app onto my Iphone 4s then suddenly my iphone's graphics were wierd ? its colours just changed the instant I downloaded the app. So at first I went to general settings too see if the colour settings were making it that way but it wasnt. So i proceeded to just turn off my phone and restart it. Then It wouldnt turn back on! i can hear that its on after i connected it to my laptop  but the screen is black? I also tried updating my phone and restoring it but its still like this !
    can someone please help me?

    Hey gloriale96!
    I have an article for you with some troubleshooting steps that will help you resolve this issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • HT201263 my iphone 4 screen decided not to work. after i lokced my phone the screen hasnt worked. it only vibrates every 5 seconds while its on charge other then thst it is a blank phone. i cant back my phone up as i have a password on it. please help me.

    please help me. iphone 4 screen wont work. and i nothing has happened to cause thins. was working fine on second then it flashed a light green colour with lines all over the screen and been black since, need it fixed

    Hold down the Home and Power button for 20 seconds. And try to update again.
    Also read and follow this:
    http://www.apple.com/support/iphone/assistant/restore/

  • HT4528 Iphone 5 screen will not turn on, tried to restart but lock button doesnt work too well

    Iphone 5 screen wont turn on, tried restarting but lock button doesnt work too well

    Hi gavin149,
    If you are having issues with an iPhone that isn't responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

    My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

    That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

  • Iphone screen is frozen and wont unlock

    iphone wont unlock. I cannot slide to unlock my iphone

    Take it to an Apple Store or Authorized Apple Service Provider for advice how to proceed.

  • IPhone 4 screen and keyboard wont rotate

    My iPhone 4 screen won't rotate in Messages. The screen wont rotate and the keyboard doesn't rotate either. It works fine for my other apps but it just doesn't work in Messages. It used to work and then it stopped. I've tried double clicking on the menu key and checking if rotating function is unlocked and it is.
    How do I fix this?

    It's not a problem with the gyroscope if it works in other apps. Try a simple reset. Hold the home and power buttons at the same time until the Apple logo appears.

  • My iphone 5 won't unlock and the screen fades to black.

    My iphone 5 won't unlock and the screen fades to black. I can't answer calls or texts. help!

    Hard Reset
    Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
    Peace, Clyde

  • My iPhone 4s screen is cracked and can't slide to unlock it.  Several of the icons are not working as well.  Is there a way to recover my photos if the phone has never had a back up or synced with another device?

    My iPhone 4s screen is cracked (due to being dropped) and I can't slide to unlock it.  Several of the the icons on screen will not work either.  Is there a way to recover my photos if the phone has never had a back up and never been synced with another device?

    kitts1979 wrote:
    My iPhone 4s screen is cracked (due to being dropped) and I can't slide to unlock it.  Several of the the icons on screen will not work either.  Is there a way to recover my photos if the phone has never had a back up and never been synced with another device?
    No in order to backup to iTunes, you would need to unlock your phone.
    In order to import pics to your computer you would need to unlock your phone.

Maybe you are looking for

  • Not able to print in duplex

    On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers. Looking at th

  • MI IPHONE 4S PERDIO EL WI-FI

    MI IPHONE 4S PERDIO EL WI-FI a la hora de actualizarlo

  • Printing 'material number' in vertical manner in smartforms

    i am printing a smartforms where in the output i have to print a variable in the vertical format.... how can i rotate the variable to print it in the vertical manner... please do help me out.... its very urgent.....

  • Setting up pricing for new sales area

    Hi SD Gurus, Well I am new to SD configuration and question that I am going to ask might be just a seconds task but any help to get me kick started would be highly appreciated. Well the client I am working for has 4 distribution channels configured a

  • Calling unix shell script from SAP

    Hi, 1. i created command in SM69 as Zshell. 2. i pass this command to FM SXPG_COMMAND_EXECUTE. it is working fine when the file is having read write execute permisson on unix level. but the problem is my unix administrator he don't want to give this