IPhone 5 Starts then Shutdowns after main screen?

So, i have had this phone for about a month and half, and one day my phone died on me then i got my charger and charged it. It showed that it was at 1% charging when youu see the battery symbol red and at 1 bar. I left it alone for about 20 mins, still- hour later- still next day- still so i unplugged it and then was wounder why it wouldnt turn on. The phone got hot later that day when i left it on my desk with the sun out. I was able to turn on my phone but then right after i got to the main screen after the apple logo. It shuts off, it seems to only respond to extereme or above normal tempuratures hot or cold.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup...  Restore as New...
Restart / Reset   >  http://support.apple.com/kb/ht1430
Restoring  >  http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Similar Messages

  • After running Appstore, the iphone cannot auto shutdown after the predefined time

    After running Appstore, the iphone cannot auto shutdown after the predefined time.

    Pressing the Home button only quits the selected application only. Doing so with Safari available will quit Safari, but this does not reset the iPhone.
    The only way to Reset an iPhone is by pressing and holding the Home button and the Sleep/Wake button simultaneously until you see the Apple logo and then release.
    No apple stores in the area but my sister and mom are going to an area where there is one so I guess I'll give it to them to take along and see if they can swap it out for another or fix it.
    You must make an appointment at an Apple Store, so unless you are able to do so and unless you are able to go with them (especially if an exchange might be involved), I suggest giving AppleCare a call instead.

  • IPod shuffle snyc starts then stops after 2 seconds

    iPod shuffle snyc starts then stops after 2 seconds

    If there is nothing new to automatically sync to the shuffle from your iTunes library, the sync probably lasts about two seconds...
    What are expecting the iTunes and the shuffle to do, when click the Sync button?

  • My iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

    my iPhone 4s (bought today) won't get past the activation screen. It says 'it may take a few minutes to activate your iPhone' and then skips to another screen saying 'activation failed - try again'. Any solutions?

    Apple's activation server is down.
    I called Apple and the support team had the same issue.
    All you can do is be patient.

  • Ipad Photo App starts to update then returns to main screen

    I have plenty of photos in the ipad but when I commence the app it starts with ' please wait updating library" then goes back to the main screen. I don't really know when it started but it worked fine when I bought it.

    Hello and welcome....
    Try the instructions here and see if that helps.
    Tunes: Photo sync creates iPod Photo Cache folder
    Carolyn

  • Iphone 4s shuts off when it has a full battery and says its dead. This started happening right after a screen replacement.

    I have an iphone 4s and ever since the screen was replaced. It has been shutting down with a full battery saying its dead. Can someone help me?

    Hi Dcp019,
    There's a section in this article for power issues like unexpected power off.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    If the issue started after a repair however, you may want to check with them about the repair.
    Best regards,
    Nubz

  • I can't update my ipod. When I check for updates it says "can't connect to server"(despite internet connection being fine). Also, when I try and update software it starts then stops after 2 seconds

    I can't update my Ipod. When I check for updates it says "can't connect to server" despite internet connection being fine. When I receive a software update message;I say install and it starts updating then stops after 2 seconds. Help! (It is a 3rd gen IPod touch(I think)). Presumably as a result of this, I have tried to put my library onto my gf's new iPod touch and it just charges it..doesn't download my library onto the touch).

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • When I touch Mail, it opens then returns to main screen

    When I touch Mail, it opens briefly and then returns to the Main screen. The main screen Mail icon says there are 73 e-mails but it won't stay open longer than a fraction of a second. This began when I was selecting e-mails to delete; the program shut down and returned to the main screen. What to do?

    Hi: A reset may help. Press and hold the Sleep/On/Off button and the Home button at the same time for approximately 10-15 seconds. Ignore the slide to turn off indicator, and wait for the Apple logo to reappear. Release buttons. No content will he changed with this process.
    Stedman

  • Can I use Factory re-set to fix that ? My Screen doesn't work when I put on mini display to HDMI My TV then set Mirror Main Screen.

    Last week I bought a miniDisplay to HDMI port. My macbookpro to SonyPlaystation 3D TV , it's work petty well on default setting. But when I set to Mirror setting, macbookpro screen turn to blue(more like computer is setting) then turn to normal and 1 second later turn to blue......that's a loop...never stop. only when I took out the miniDisplay to HDMI port, that stop...The TV doesn't have signal.
    I tried to delete apple.display.config files, but I can't find all of them( I already followed Apple support page article), so this way still doesn't work for me.
    what way can help me fix that?

    Disconnect the external monitor and any other third-party peripherals. Be sure to backup your files.
    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc.  Insert the disc into the
             optical drive and restart the computer.  After the chime press and hold down the
             "C" key.  Release the key when you see a small spinning gear appear below the
             dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, set the format type to Mac
             OS Extended (Journaled, if supported), then click on the Partition button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.

  • IPhone Safari launches itself after unlocking screen

    This started happening recently. Ive noticed after using safari and putting the device to sleep after waking it and unlocking the screen safari launches. When it went to sleep safari was not running, and I'm pretty sure it wasn't even in the list of recently used apps. On top of it, all the tabs I previously had opened are missing as well.
    Ive cleared safari cookies, history etc... Completed a hard reset, cleaned the screen, everything I can think of short of restoring factory defaults. This is also happening to a family members iPhone as well. 4S and 4 respectively.
    Anyone else seen this odd behavior?

    hi
    back up your phone, reset it and restore from backup

  • Time Machine start then stop after few seconds

    Hi,
    I've tried to reset Time Machine (trashed the library plist file, erased the backup HD), also installed Time Machine Buddy widget.
    When I start a fresh new backup, Time Machine start indexing, then stops without backup anything.
    The error log of Time Machine Buddy widget is this:
    Starting standard backup
    Backing up to: /Volumes/TimeMachine/Backups.backupdb
    Backup content size: 156.0 GB excluded items size: 1.8 GB for volume Mastoidontico
    No pre-backup thinning needed: 185.11 GB requested (including padding), 1.82 TB available
    Waiting for index to be ready (101)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    LaunchServices: bad alias at 0x1041d7094, size 104, CSStore size 4391026
    * process 240 exceeded 500 log message per second limit - remaining messages this second discarded *
    2010-02-02 18:47:12.920 ReportCrash[271:2703] Saved crash report for backupd[240] version ??? (???) to /Library/Logs/DiagnosticReports/backupd2010-02-02-184712localhost.crash
    Any help to solve my problem?
    Thanks!

    Process: backupd [240]
    Path: /System/Library/CoreServices/backupd
    Identifier: backupd
    Version: ??? (???)
    Code Type: X86-64 (Native)
    Parent Process: launchd [1]
    Date/Time: 2010-02-02 18:47:12.319 +0100
    OS Version: Mac OS X 10.6.2 (10C540)
    Report Version: 6
    Exception Type: EXCBADACCESS (SIGSEGV)
    Exception Codes: KERNINVALIDADDRESS at 0x000000014c486000
    Crashed Thread: 2
    Thread 0: Dispatch queue: com.apple.main-thread
    0 libSystem.B.dylib 0x00007fff80044e3a machmsgtrap + 10
    1 libSystem.B.dylib 0x00007fff800454ad mach_msg + 59
    2 com.apple.CoreFoundation 0x00007fff868377a2 __CFRunLoopRun + 1698
    3 com.apple.CoreFoundation 0x00007fff86836c2f CFRunLoopRunSpecific + 575
    4 com.apple.CoreFoundation 0x00007fff868369b6 CFRunLoopRun + 70
    5 backupd 0x000000010000d2f1 0x100000000 + 54001
    6 backupd 0x0000000100004014 0x100000000 + 16404
    Thread 1: Dispatch queue: com.apple.libdispatch-manager
    0 libSystem.B.dylib 0x00007fff8005dbba kevent + 10
    1 libSystem.B.dylib 0x00007fff8005fa85 dispatch_mgrinvoke + 154
    2 libSystem.B.dylib 0x00007fff8005f75c dispatch_queueinvoke + 185
    3 libSystem.B.dylib 0x00007fff8005f286 dispatch_workerthread2 + 244
    4 libSystem.B.dylib 0x00007fff8005ebb8 pthreadwqthread + 353
    5 libSystem.B.dylib 0x00007fff8005ea55 start_wqthread + 13
    Thread 2 Crashed:
    0 ...ple.CoreServices.CarbonCore 0x00007fff85070987 CSStoreGetUnit + 84
    1 com.apple.LaunchServices 0x00007fff85df44a3 _LSBundleFindWithNode + 544
    2 com.apple.LaunchServices 0x00007fff85decc79 _LSFindOrRegisterBundleNode + 219
    3 com.apple.LaunchServices 0x00007fff85decb2d _LSCopyItemAttributeForRefInfoWithOptions + 201
    4 com.apple.LaunchServices 0x00007fff85deea77 prepareAttributeValueForKey(__CFURL const*, __FileCache*, __CFString const*, void const**, __CFError**) + 79
    5 com.apple.LaunchServices 0x00007fff85dee9dc prepareDistinctLocalizedNameValue(__CFURL const*, __FileCache*, __CFError**) + 36
    6 com.apple.LaunchServices 0x00007fff85dee9b3 prepareLocalizedNameValue(__CFURL const*, __FileCache*, __CFError**) + 9
    7 com.apple.LaunchServices 0x00007fff85dee7bc LSPropertyProviderPrepareValues(__CFURL const*, __FileCache*, __CFString const* const*, void const**, long, void const*, __CFError**) + 51
    8 ...ple.CoreServices.CarbonCore 0x00007fff85081c90 prepareValuesForBitmap(__CFURL const*, __FileCache*, _FilePropertyBitmap*, __CFError**) + 264
    9 ...ple.CoreServices.CarbonCore 0x00007fff85080779 _FSURLCopyResourcePropertiesForKeys + 980
    10 com.apple.CoreFoundation 0x00007fff8683f402 CFURLCopyResourcePropertiesForKeys + 98
    11 com.apple.DesktopServices 0x00007fff84b30169 TCFURLInfo::FetchProperties(bool) + 91
    12 com.apple.DesktopServices 0x00007fff84b2ffbd TCFURLInfo::Initialize(__CFURL const*, bool, bool) + 183
    13 com.apple.DesktopServices 0x00007fff84b8e07f TCFURLIterator::NextRaw(TCountedPtr<TCFURLInfo>&) + 79
    14 com.apple.DesktopServices 0x00007fff84b8e11a TCFURLIterator::Next(TCountedPtr<TCFURLInfo>&) + 40
    15 com.apple.DesktopServices 0x00007fff84b8f517 TDeepCFURLIterator::NextInternal(TCountedPtr<TCFURLInfo>&, int&, int&, bool&) + 73
    16 com.apple.DesktopServices 0x00007fff84b8f651 TDeepCFURLIterator::Next(TCountedPtr<TCFURLInfo>&, int&, int&, bool&) + 49
    17 com.apple.DesktopServices 0x00007fff84b95629 TCopyReader::GetNextItem() + 1039
    18 com.apple.DesktopServices 0x00007fff84b95fac TCopyReader::Read(unsigned long long, TCountedPtr<TCFURLInfo> const&, TCountedPtr<TCFURLInfo> const&) + 128
    19 com.apple.DesktopServices 0x00007fff84b80f27 TFSCopyOperation::CopyToTarget() + 607
    20 com.apple.DesktopServices 0x00007fff84b82d9f TFSCopyOperation::DoCopy(TCountedPtr<TCFURLInfo> const&) + 595
    21 com.apple.DesktopServices 0x00007fff84b78a68 _NodeOperation + 469
    22 backupd 0x00000001000164af 0x100000000 + 91311
    23 backupd 0x0000000100015923 0x100000000 + 88355
    24 backupd 0x000000010000ffc7 0x100000000 + 65479
    25 backupd 0x000000010000a7e2 0x100000000 + 42978
    26 backupd 0x0000000100006927 0x100000000 + 26919
    27 com.apple.Foundation 0x00007fff88a2be99 _NSThread__main_ + 1429
    28 libSystem.B.dylib 0x00007fff8007df8e pthreadstart + 331
    29 libSystem.B.dylib 0x00007fff8007de41 thread_start + 13

  • Login Screen, Then Jump To Main Screen

    Hi, how do i show a startup screen which asks a user for server IP address, there name and password then when they enter them details by pressing login/enter, if these details are right, the main chat window will be displayed which will replace the login screen.
    Thanks.

    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JDialog.html
    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JTextField.html
    http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JPasswordField.html

  • Iphone 5 no service after new screen

    can any one help just keeps coming up with no service tried rebooting a few times ,reset everything no joy and help please

    Talk to whoever replaced the screen. If it was replaced by Apple, they should not have let it leave the store if it wasn't working, and if it failed after they replaced the screen, you should take it back to them to have it checked.
    If it was replaced by someone other than Apple, Apple won't touch it any more.

  • Display enlarged itself somehow and is stuck on my e-mail . . . how do I get it back to normal size and hopefully then back to main screen icons . . . when I turn my phone on/off it just goes right bak to my e-mail

    Display enlarged  and stuck on e-mail screen . . . when I turn my phone on/off the e-mail comes up ot the home screen and I cannot no get the size back to normal . . . any suggestions?

    Double tap with THREE fingers to turn zoom off, then go into: Settings>General>Accessibility and turn it off for good.

  • In Smartform How to display footer & some secndry window after Main window?

    Hi,
    My requirement in Smartform is to display footer and and secondary window  after the Main window.
    also if item goes to 2nd & 3rd Page then also after main window footer and some secondary window should appear.
    Do i have to maintain footer and sec. window in Main Window itself
    Plz tell me in detail.
    Regards
    Vivek

    Hi Vivek,
    In smartform, specific legth is allocated to each window, that you create for a page.
    So, if you want to display secondary window on each page, create 1 secondary window with the required length and it will be displayed on each page.
    And you have written that you want to display the footer of main window also on all pages. It won't happen when you display your footer in main window. you will have to create a new window for your footer as well. Main window footer will always get displayed at the end of the main window.
    e.g. If your main window flows on second page, main window footer will be displayed on second page only.
    I hope this helps.
    Thanks,
    Archana

Maybe you are looking for

  • ALV Display Problem

    Dear Experts, I m working on ALV Report, User has 3 options : Open item, Clear Item and All item. ALV output is fine for open and clear item. but when user choose All item,  it displays every column twice. For reference code is like IF r_open = 'X'.

  • Can you recommend a system for me?

    Hello!  I am looking into purchasing a new computer system to support my work projects and am not sure what to purchase.  I mostly work with mass communication, photos, other graphics, print design as well as routine word processing.  I use Illustrat

  • New Event Log Errors L355-S7902

    These two are recurring daily and showing up in Event Viewer>Windows>Diagnostic Performance>Operational.  I have noticed that shutdown is too long so I have copied the errors. Log Name:      Microsoft-Windows-Diagnostics-Performance/Operatio​nal Sour

  • Restore/recover from cold user-managed backup.

    i shutdown db,(db is in no-archivelog mode), copy the dir having *.ctl, *.log & *.dbf files, what would be steps to recover in case, my idea is restore all files in original dir and alter database open resetlogs should do the work, if that did'n work

  • How we can restrict generation of schedule line if Target Qty is reached.

    Dear Gurus, What is the Exact Role of Target Qty in Scheduling Agreement. I have an issue here is even if the Target Qty is reached , system generates schedule lines through MRP. How we can restrict the generation of schedule line if Target Qty is re