IPhone 5 stops responding when under elect. power
Hi everybody.
During the recaharging of my iPhone 5 i see that i cannot answer to phone calls and the unlock slide stops
moving. To do things like the ones above I have to disconnect the iPhone from the electrical power.
Anyone has having the same problem?
TKS.
Marco from Italy
I have the same problem with my iPhone 5, did you fix it or your warranty covers this problem?
Similar Messages
-
My iPhone was working fine. A call came and the touchscreen was not working. Touchscreen replacement was advised. I pressed the top right buttom and home button simultaneously for a restart and touchscreen was not working. I didn't have money so I brought it back home. After 3 weeks I put it for charge on my PC and first it showed charging sign...and then suddenly it asked for my password to unlock and the touchscreen was working fine. I charged fully and the iPhone worked perfectly fine for a day.
When I put it for charge the other day, the touchscreen stopped working. Same problem. I tried to restore factory setting option in which everything will be erased and copied again but error 1604 is coming.
Do I have to change the touchscreen? I don't think the touchscreen is damaged. Maybe software problem. Please help me, guide me.
Thank you in advance!Well, the dropping may have damaged something, perhaps related to the lock mechanism. Just have it checked in a Care Center.
If you find my post helpful please click the green star on the left under the avatar. Thanks. -
Hello, Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive. ruffly about 10 or so. The Reboots happen randomly and do not create a dump file. We have contacted Lenovo and they are
not sure why its happening. Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up. I am also looking at using Procmon to dump to a file as well.
If anyone has any other ideas please let me know.
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
+ System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0
Keywords 0x8000000000000002
- TimeCreated
[ SystemTime] 2012-02-01T00:02:48.677610900Z
EventRecordID 8270
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 8
Channel System
Computer LR8K6TLC.cntr.thrivent.corp
- Security
[ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 129725280988099400
Event 89, Kernel-Power
ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.
_PSV = 0K
_TC1 = 0
_TC2 = 0
_TSP = 0ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 371K
_HOT = 0K
_PSL - see event data.
---- Details
+
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2012-02-01T00:02:49.270411900Z
EventRecordID
8271
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
68
Channel
System
Computer
LR8K6TLC.cntr.thrivent.corp
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\THM0
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
371
_HOT
0
_PSL
0000000000000000
Thank you.We have tested and checked both the Bios and firmware of the SSD Drive's
Bios was up to date and no issue
Firmware was also up to date as well.
Users are still experiencing random Reboots. I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
restart" off under Startup and Recovery) No dmp files as of yet. Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue. If anyone has any idea's to be able to capture what maybe happening that would
be great.
Thank you. -
I recently updated my Mac book and Itunes and Mail have stop responding.
iTunes work fine till I connect my Iphone. The moment I connect my iphone it stops responding. I have reset my phone couple of times already and have re-install iTunes few times. Does anyone have any other suggestion on it?
Mail will never Quit. It will get my new mails or send them when I start it but after five mins or so it will stop responding at all.
Please let me know if anyone is facing similar problem.You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
iTunes stops responding when I plug in my iPod. I have updated iTunes to latest version, still crashes. OS is Vista. How do I fix this?
Hm... Strange.
I had reset the iPhone.
I tried disabling the auto-launch of iPhoto, and...
...when I plugged iPhone in, it started to freeze iTunes, but after a minute or so, the iPhone started synching. I found this odd because I had disabled auto-sync (I press Sync in iTunes when I want to have it Sync).
Now, of course, I do want auto-launch of iPhoto back on, since I like it for when I attach my digital cameras. I hope that when I set it back, it won't re-introduce the problem.
The restart I did may have helped. I resist restarting because my wife's account is often open and she frequently leaves unsaved files up, so it is a pain to respectfully close out her work and then restart. -
Safari stops responding when I try to bookmark (and other slow problems!)
Two weeks ago my logicboard died, so I sent my ibook out to Apple for it to be fixed. Ever since I got it back this past Tuesday, my Safari has been extremely slow, but nothing else is wrong with my computer. Here are the problems:
- The biggest issue is that Safari stops responding when I try to make a bookmark. The popup appears to select the bookmark's destination and to enter the name, but when you hit ok, the rainbow wheel comes up and it stops responding, so I have to reset Safari, and now I can't make new bookmarks at all.
- It lags when it tries to open new windows, especially new tabs.
- If a new page loads that scrolls at all, and then I try to scroll down, the wheel appears for several seconds until it can load the rest of the page. It's as though it gets stuck before it can scroll.
- Sometimes when typing, it will also start to lag behind my typing speed, or if I try to click on a new field, it will not immediately allow me to type on occasion.
All these things have never happened before I sent it out. I have reset my cache, and I have tried entering the open DNS addresses in my networks, which has improved loading speed, but hasn't fixed any of these problems. Does anyone have any idea what could be wrong and how I can fix anything?
Message was edited by: canyon to the skyTry verifying the hard disk.
Boot from your restore disk while holding down the C key until you see the Apple logo, then let go of the C key. You'll see an Installation window, select English. From the Menu Bar, select Utilities/Disk Utility. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click Verify. If DU reports errors, click Repair. If Disk Utility cannot repair the disk you have several options. One is DiskWarrior or
TechToolPro If Disk Utility can repair any errors, go back to the Menu Bar, click Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
If you don't have a restore disk, try booting into Safe Mode
Carolyn -
After I upgraded my Mac with Yosemite, Photoshop Elements 12 Editor stops responding when you use some tools like eraser, clone stamp.
This should help. Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
~ Arpit -
Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?
First, go install the MacOS 10.10 updates - you should be on 10.10.2.
I haven't heard of Photoshop not responding during opens and saves. Does it stop responding while the open/save dialogs are visible, or while Photoshop is actually reading or writing files?
10.10.1 did fix a crash in the open/save dialogs, but 10.10.2 still has some odd issues (mostly program errors coming from the OS code) in the open/save dialogs. -
Thunderbird stops "responding" when I try to enter a password why? this is new today.
As of this afternoon Thunderbird stops responding when I attempt to enter a password. The accounts have been working for years with thunderbird until today. I can open thunderbird in "safe" mode but that is not useful since plugins are disabled.
I ended up removing v 1.0.1 of "Provider for Google Calendar" plugin; installing v 0.25, then re-setup the Google calendar
These instructions are where I found the different location link to use while setting up the calendar in thunderbird/lightning.
https://sites.google.com/a/tc.columbia.edu/tcapps2/home/how-to/accessing-email-and-calendar-with-thunderbird
The gmail calendar location prior to today was linked to a "googleapi://... .../?calendar=email address... etc." link.
After I added the new gmail calendar to thunderbird the location link is to "https://www.google.com/calendar/feeds/... etc."
Provider for Google Calendar versions:
https://addons.mozilla.org/en-US/thunderbird/addon/provider-for-google-calendar/versions/ -
After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding on certain moment, i tried to reinstall freshly and update to version 9.1.5 but problem same so at this moment version is 9.1.6. I tried 64bit too but no changes. And the thing is that i need studio and i need to sort this problem quick.
Please everybody if you had same problem give me answer or any idea what to do
ThanksThe sample rate is not 128 or so, you probably mean the buffer size...
But the performance drop makes sense: switching between a 64 bit process and 32 bit doesn't come free: it cost performance and creates a jitter, which also either shows as performance lost or instability.
You really have to move away from outdated 32 bit AudioUnits, sorry. Ask the vendors to finally release 64 bit versions, it has been several years since 64 bit is available. -
My iPhone just stopped vibrating when getting incoming emails...
My iPhone just stopped vibrating when getting incoming emails... Yesterday everytime i got an email, my phone would vibrate, and now, its on vibrate and it doesnt vibrate with new emails, does anyone know how to correct this?
Mine does the same thing, and it also bleeds over into the email tone as well. It works for a while and then it suddenly stops. Turning the phone off and back on fixes it for a while, but it's a pain.
-
My iPhone 4 stopped recognizing when it is plugged in to charge. It has to completely die and a soft reset has to be done to it before it will charge and start back up running. A tech at a store said it was just a short in the phone and nothing could be done to fix it, but I'm sure there has to be other options. Any suggestions?
To rule out a software issue or damaged data inside the backup, set it up as new device without using the latest backup afterwards.
If the phone is back to normal after that, restore from the backup again.
How to back up your data and set up as a new device -
Find My iPhone has stopped responding from iCloud
I don't know what triggered the problem. I was trying to find my iphone in my Imac today with bad results. It was working fine until yesterday, but today it didn't. (last night I even forgot to turn off the computer, so I didn´t have to turn it on this morning).
I logged into iCloud with my apple id and every time I click Find My Iphone I get a message saying "Find My iPhone has stopped responding." in an error reporting box.
I checked with my Ipad and it worked fine, and I also checked on the web http://www.apple.com/es/support/systemstatus/
I tried with Safari and with Firefox, with same results.
I tried with my son's apple id too and with my brother's too, with the same bad results.
I checked for Safari Extensions, but I don´t have any.
I checked for software updates, but the Imac is ok.
I restarted my Imac a couple of times, too.
The message says:
"Find My iPhone has stopped responding.
An error has prevented this application from working properly."
I did send to Apple the error, which is the following:
ERROR
undefined is not an object (evaluating 'r.mapEngine'). The calling function is render@
FILE
https://cdn.apple-mapkit.com/mk/1/mapkit.js
LINE
1690
EXCEPTION INFO
column: 1603
STACK
render@https://cdn.apple-mapkit.com/mk/1/mapkit.js:1690:1603
reloadTileCollections@https://cdn.apple-mapkit.com/mk/1/mapkit.js:1693:164
https://cdn.apple-mapkit.com/mk/1/mapkit.js:1690:1476
flushNode@https://cdn.apple-mapkit.com/mk/1/mapkit.js:830:453
flushNode@https://cdn.apple-mapkit.com/mk/1/mapkit.js:778:557
N@https://cdn.apple-mapkit.com/mk/1/mapkit.js:757:1100
b@https://cdn.apple-mapkit.com/mk/1/mapkit.js:757:746
y@https://cdn.apple-mapkit.com/mk/1/mapkit.js:757:804
setForObjectWithSetter@https://cdn.apple-mapkit.com/mk/1/mapkit.js:785:266
o@https://cdn.apple-mapkit.com/mk/1/mapkit.js:690:854
set@https://cdn.apple-mapkit.com/mk/1/mapkit.js:1314:198
init@https://cdn.apple-mapkit.com/mk/1/mapkit.js:1615:149
init@https://cdn.apple-mapkit.com/mk/1/mapkit.js:1627:84
init@https://cdn.apple-mapkit.com/mk/1/mapkit.js:1706:763
init@https://cdn.apple-mapkit.com/mk/1/mapkit.js:1711:1080
init@https://cdn.apple-mapkit.com/mk/1/mapkit.js:1732:208
init@https://cdn.apple-mapkit.com/mk/1/mapkit.js:1741:89
create@https://cdn.apple-mapkit.com/mk/1/mapkit.js:668:1263
n@https://cdn.apple-mapkit.com/mk/1/mapkit.js:1758:81
createMap@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:921:501
didCreateLayer@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:983:538
_notifyDidCreateLayer@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:227:927
_notifyDidCreateLayer@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:227:1131
_notifyDidCreateLayer@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:227:1131
_notifyDidCreateLayer@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:227:1131
_notifyDidCreateLayer@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:227:1131
createLayer@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:227:647
insert@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:256:1537
appendTo@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:257:49
append@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:256:1035
main@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:1012:1144
main@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:88:700
https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:779:1091
run@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:200:138
_applicationShouldInvokeMain@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:779:336
invokeDelegateMethod@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:213:126
_messageWasReceived@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:778:434
handle@https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:220:789
https://www.icloud.com/applications/find/14FPlus.a7f2fdd/es-es/javascript-packed .js:221:733
IS FATAL
true
TYPE
client
APPLICATION NAME
find
APPLICATION BUILD NUMBER
14FPlus.a7f2fdd
LOG
Wed, 15 Oct 2014 17:56:38 GMT: DEBUG: Creating local CK.User object
Wed, 15 Oct 2014 17:56:38 GMT: INFO: Spent 61 ms symbolicating
Wed, 15 Oct 2014 17:56:38 GMT: DEBUG: CloudKit: ErrorCatcher dialog invoked.
APP STATECHART
SC.Statechart:sc934
initialized: true
name: cloudos-statechart
current-states: [
active.springboard.waitingForApp
state-transition:
active: false
suspended: false
handling-event: false
BUILD NUMBER
14FPlus30
TIME
Wed Oct 15 2014 12:56:38 GMT-0500 (ECT) (1413395798979)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_9_5) AppleWebKit/600.1.17 (KHTML, like Gecko) Version/7.1 Safari/537.85.10
DSID
1012045331
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Wed, 15 Oct 2014 17:56:38 GMT: DEBUG: Creating local CK.User object
Wed, 15 Oct 2014 17:56:38 GMT: INFO: Spent 61 ms symbolicating
Wed, 15 Oct 2014 17:56:38 GMT: DEBUG: CloudKit: ErrorCatcher dialog invoked.I have the same problem too!
Find My iPhone has stopped responding.
The following error message is shown:
ERROR
Cannot read property 'mapEngine' of undefined. The calling function is TypeError: at n$324.extend.render (
FILE
Unknown
LINE
Unknown
MOST RECENT STACK
function (e){CK.errorCatcher.handleException(e)}
> args: TypeError: Cannot read property 'mapEngine' of undefined, undefined, undefined, undefined, undefined
STACK
TypeError: Cannot read property 'mapEngine' of undefined
at n$324.extend.render (https://cdn.apple-mapkit.com/mk/1/mapkit.js:1690:1603)
at n$324.extend.reloadTileCollections (https://cdn.apple-mapkit.com/mk/1/mapkit.js:1693:158)
at null.<anonymous> (https://cdn.apple-mapkit.com/mk/1/mapkit.js:1690:1455)
at n$46.extend.flushNode (https://cdn.apple-mapkit.com/mk/1/mapkit.js:830:437)
at n.flushNode (https://cdn.apple-mapkit.com/mk/1/mapkit.js:778:548)
at N (https://cdn.apple-mapkit.com/mk/1/mapkit.js:757:1091)
at b (https://cdn.apple-mapkit.com/mk/1/mapkit.js:757:745)
at Object.y [as resume] (https://cdn.apple-mapkit.com/mk/1/mapkit.js:757:803)
at n$3.extend.setForObjectWithSetter (https://cdn.apple-mapkit.com/mk/1/mapkit.js:785:260)
at o (https://cdn.apple-mapkit.com/mk/1/mapkit.js:690:826)
at t.set (https://cdn.apple-mapkit.com/mk/1/mapkit.js:1314:194)
at t.init (https://cdn.apple-mapkit.com/mk/1/mapkit.js:1615:146)
at t.init (https://cdn.apple-mapkit.com/mk/1/mapkit.js:1627:79)
IS FATAL
true
TYPE
client
APPLICATION NAME
find
APPLICATION BUILD NUMBER
14FPlus.a7f2fdd
LOG
Wed, 15 Oct 2014 06:34:40 GMT: DEBUG: Creating local CK.User object
Wed, 15 Oct 2014 06:34:40 GMT: INFO: Spent 465 ms symbolicating
Wed, 15 Oct 2014 06:34:40 GMT: DEBUG: CloudKit: ErrorCatcher dialog invoked.
APP STATECHART
SC.Statechart:sc934
initialized: true
name: cloudos-statechart
current-states: [
active.springboard.waitingForApp
state-transition:
active: false
suspended: false
handling-event: false
BUILD NUMBER
14FPlus30
TIME
Wed Oct 15 2014 14:34:40 GMT+0800 (China Standard Time) (1413354880888)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/37.0.2062.124 Safari/537.36
DSID
1332262939
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Wed, 15 Oct 2014 06:34:40 GMT: DEBUG: Creating local CK.User object
Wed, 15 Oct 2014 06:34:40 GMT: INFO: Spent 465 ms symbolicating
Wed, 15 Oct 2014 06:34:40 GMT: DEBUG: CloudKit: ErrorCatcher dialog invoked.
iPhone 6 -
HT201210 the iphone 3g stopped work when updated to os6, is this happening to everyone?
my iphone 3gs stopped working when updating to OS6
Quick question, are you positive the 3GS is supported by IOS 6?
-
IPad mini stops responding when trying software updatea
IiPad mini stops responding when clicking "agree" when updating software
Close all apps on the iPad, reset the device and then try the update again.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Maybe you are looking for
-
Little help with making an email form.
can any of you lovely, lovely people point me in the direction of a good Dreamweaver CS3 tutorial on how to make an email form. Preferably one with a "conform email address" text field. Thanks all! P.S. I have tried looking.
-
I have downloaded the new ios5 on my 3gs and it cant seem to connect on to my wifi? Could anyone help with this??
-
What is the role of JNLP in web start?
Sir, I am new to web start. I am able to run some application but may you please tell me when Protocol JNLP is work in it. And how the security features are associate to it. Please explained me the architecture of it.
-
Yamaha s70xs template for Logic?
How do I get Logic to "see" ALL of my patches in my Yamaha s70xs? I own "studio manager", and use to use it with Cubase.....how do I get studio manager to function with Logic Studio pro? Thanks, Bob
-
I am getting this mandatory webOS system update. do I really need to update this?
I am getting e-mails stateing the I need to Mandatory webOS system update. I do not use HP and do not use cloud, do I need to update this?