IPhone 5 torch and flash doesn't work

iPhone 5 torch and flash doesn't work? How can I activate?

The flash is activated as follows:
When you are in camera mode, and the camera is open about to take a photo, you will see an elliptical button in the upper left with a flash-like sign.  Press that button and you will find it has three settings: Auto, On, and Off.
Choose one.
I don't know what you mean by "torch".

Similar Messages

  • Hi! My friend told me that her iPhone 5 has problem and the charger is not charging. I gave her mine, but doesn't worked on her too. After that I tried to charge my iPhone 5 and it doesn't work on my phone too. Have you any idea ?? What to do ??? Thanx !

    Hi! My friend told me that her iPhone 5 has problem and the charger is not charging. I gave her mine, but doesn't worked on her too. After that I tried to charge my iPhone 5 and it doesn't work on my phone too. Have you any idea ?? What to do ??? Thanx !

    But of course I'm sure! I went to the local apple store and they replaced my charger ! Thank you!

  • Brand new iPhone 4, and speakers doesn't work, did restore back to factory settings, not luck, any suggestions. This iPhone was purchased in US, currently in India, will Apple support in India?

    Brand new iPhone 4 (unlocked), got it activated yesterday, and speakers doesn't work, did restore back to factory settings, not luck, any suggestions. This iPhone was purchased in US, currently in India, will Apple support in India?

    There are many threads on this forum regarding speaker not working issues.  You might try searching them.  Hopefully you'll find the answer you need.
    BTW, the iPhone only has ONE speaker.

  • Lib32-konqueror-nsplugins and flash doesn't work

    Hallo,
    I tried the lib32-konqueror-nsplugins. But it doesn't work because:
    Adobe Flash Player: gtk_clipboard_get(GDK_SELECTION_PRIMARY); failed. Trying to call gtk_init(0,0);
    (<unknown>:6900): Gdk-WARNING **: Error converting from UTF-8 to STRING: Could not open converter from 'UTF-8' to 'ISO-8859-1'
    (<unknown>:6900): Gdk-WARNING **: Error converting from UTF-8 to STRING: Conversion from character set 'UTF-8' to 'ISO-8859-1' is not supported
    So there is a problem with utf8. So I changed en_US.utf8 to en_US in rc.conf rebooted but still the same error. I searched but I didn't find a solution. Can you please help me? (I have lib32-gtk2 installed)
    Stefan
    Last edited by Noneus (2007-09-03 01:14:18)

    Hi Noneus,
    The error message is quite normal you get it in opera too. The problem is (since last weeks updates) you need lib32-pcre. I added it as a lib32-konqueror-nsplugins decency so one else has this problem.

  • I just got an iPhone 4s and facetime doesn't work for certain contacts?  why?

    I know that facetime only works for those contacts that have an iPhone, iPad, iPod, etc....however it doesn't work for some of my contacts that do have those devices....why?
    Many thanks to anyone that can help!
    Heather
    Pasadena, NL, Canada

    using facetime http://support.apple.com/kb/ht4319
    troubleshooting facetime http://support.apple.com/kb/TS3367
    What happens when you try to facetime those contacts?
    Are those contacts on wifi when you try to facetime them.

  • I just made update to iOS 7 on my iphone 4 and now doesn't work anymore the left side button of ringtone why??

    Update to iOS 7.0.4 and ringtone button doesn't work anymore, why???

    Double click home button, then swipe up on app picture (not the icon itself)

  • Apple 30-pin adapter for my iPhone 4 and iPod doesn't work

    I purchased an Apple 30-pin adapter for my iPhone 4 and iPod touch to connect an HDMI cable to my HDTV.  I am able to get audio but no picture.  Any suggestions as to what the problem may be?

    Review this
    http://support.apple.com/kb/ht4108

  • I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped

    I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped I went into the camera app and tried to see if it would flash when I took a picture but I saw it light very faintly and hasn't done lot up since. Should I get the led replaced?

    First, try bringing up Control Center by swiping up from the bottom of the home screen.  Turn on the flashlight by tapping the icon in the lower left.  Does the flashlight work?  If not, perhaps you have a hardware issue.
    If it works, check the top of the screen when you open the Camera app to make sure you have the flash on.

  • IPhone 4s glitches, is cracked, and camera flash doesn't work. What is the cost to exchange for a new one?

    Front screen of my iPhone 4s is cracked, it freezes/lags, camera flash doesn't work, and every time you press a bit harder on the front screen red and grey vertical lines appear. I have had it for more than a year now, so how much will it cost for me to replace it?

    These prices are for the U.S.
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model          Out-of-Warranty Service
    iPhone 5          $229
    iPhone 4S          $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone          $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
    When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above.  This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

  • Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hey lozza567,
    Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Issues with sending and receiving MMS
    You will need these to send and receive MMS:
    - An iPhone 3G or later.
    - iOS 3.1 or later.
    - A cellular data connection. MMS isn't available if you are using only Wi-Fi.
    - A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
    - A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
    To resolve issues with sending and receiving MMS, follow these steps first
    1. Go to Settings and turn airplane mode off.
    2. Go to Settings > Messages and turn MMS Messaging on.
    3. Go to Settings > Cellular and turn Cellular Data on.
    4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
    5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
    6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
    7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
    8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
    9. Restart your iPhone.
    10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    11. Reseat your SIM card.
    If you are still unable to send or receive MMS, follow these steps
    1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
    3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
    4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
    5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
    7. Back up and restore your iPhone as new.
    8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
    9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
    10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
    11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
    Thanks,
    Matt M.

  • My iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

    my iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

    Hello ole-gunnar,
    Thanks for using Apple Support Communities.
    If your iPhone is unresponsive after updating your iOS version, then I'd like you to please follow the troubleshooting below.
    If you see a black screen
    You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on. 
    You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
    Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
    Restart your device.
    If it still doesn't respond, or if it doesn't turn back on, reset your device.
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support. 
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Cheers,
    Alex H.

  • How do I get my music from Media center to my iphone. Itunes won't import the MC music library, and MC won't recognize and synch to the iphone so I can't load playlists from MC to my iphone. Itunes help doesn't work.

    How do I get my music from Media Center to my iphone 4s. Itunes 10.5 won't import the MC music library, and MC won't recognize and synch to the iphone plugged into the USB port so I can't load playlists from MC to my iphone. Itunes help doesn't work.

    Hello and welcome to the support community
    As you know, your iPhone 5 is not compatible with our iBook G4. To get your music in iTunes from your iBook to your iPhone you would need to migrate the music files to a newer intel based Mac. A Mac which has Mac OS X 10.6 or higher installed. Then sync your iPhone 5.

  • Help iPhone 4 "Power Button doesn't work", how can I get repair it and how much will cost, want to keep same phone everything works fine not power button. :(

    My iPhone 4 power button doesn't work, how can I get repair it and how much will cost, want to keep same phone everything works fine not power button not working unable used my phone. My warranty is Expired how much will cost to put it on my phone plan? Thanks!

    Hi Julio,
    Here's a link for your question:
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Cheers,
    GB

  • HT1296 When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

    When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

    The music sync is one way - computer to iphone.  The only exception is itunes purchases.  File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.  Use your backup copy to move everything to your new computer.

  • HT201407 I bought my iphone 4 in the UK and I am trying to use a sim in the UAE and it doesn't work.  It says that the sim is not valid, how can I get this unlocked?

    I bought my iphone 4 in the UK and I am trying to use a sim in the UAE and it doesn't work.  It says that the sim is not valid, how can I get this unlocked?

    You are saying the phone is locked, but then you are saying there is no provider. The two situations cannot peacefully coexist. Contact Apple and they can tell you if the phone is locked and if locked to which provider the phone is locked. People on this board are not Apple employees and cannot get you that information.

Maybe you are looking for

  • I moved my iTunes folder and now I can't make iTunes find it again.

    I moved my entire iTunes folder from \\dc1\JEly$\MyMusic\iTunes\iTunesMusic to C:\Documents and Settings\John Ely\My Documents\My Music\iTunes . I did this to try to make MediaSync for Blackberry work. (Which has been a major headache.) But now iTune

  • Tolerance group for customer and vendor,

    Hello every one, I NEED your help for testing the vendor and customer tolerance ,recently we configured new tolerance for vendors and customers ,but we are unable to test this new tolerance any know this testing please help we configured  in OBA3.AND

  • Variable works in Dev but not in Test in Webi report

    Hi All, I have written a variable to calculate Average. It works fine for all entries in Dev. But when I transport it to Test Environment, it works fine for some entries and does not work for some entries. Any suggestions? This is happening in WEBI R

  • Cannot access local copy of NAS

    I can logon to my NAS, however my MacBook pro keeps prompting me to logon to the local copy of the NAS.  Then rejects my username and password combo.  I no longer know what that combo is.  Is there a way to reset this? 

  • Fund Management customizing

    We are importing a new portuguese company in our system; this company uses a old SAP installation; this company use a particular report which display the financial posting organized ans summed for the committement items of FM. We never use FM in our