Iphone 5 troubles with charging after update

I have been using my iphone 5 for quite a while now.  Never had a single problem charging it.  I could plug it in anywhere, and it would charge.  I did the last update to 6.1.2 and it quite charging.  The computer that I always updated it to and charged it from, stopped charging it.  Tried all the different USB ports to no avail.  It does however, sync with the computer, but wil not charge.  Plugged it into another computer, and it worked just fine.  Brought in another computer, and it worked fine again.  Plugged it back into the main computer and nothing.  Took it home that night, plugged it into the wall and it charged.  Plugged it into a battery pack, and got nothing.  This is very troublesome to me.  Can anyone help?

Hey Lora Claypool,
Thanks for the question. I understand that you are experiencing issues making phone calls with your iPhone 5. The following resource may provide a solution:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Thanks,
Matt M.

Similar Messages

  • Trouble with safari after updating SL 10.6.8

    I updated my OS last night to 10.6.8  and today, in Safari I find that I cannot view amazon.com  When I open a page, much of it is blank.  Anyone else having trouble with amazon after updating to 10.6.8?
    michelle

    (This is a copy of my post in this thread.)
    I updated to 10.6.8 too, was suddenly unable to print to my before perfectly working printer (an HP Color LaserJet CP1515n hooked up to an AirPort Express), and started scouring the web for solutions. The more I tried, the more disappointed and frustrated I became. Then I came here, read about a possible solution in this very thread (the disk image 'Repair10.6.8.dmg') and became hopeful again.
    But alas...
    Sadly, this isn't working for me at all. I ran the script that supposedly fixes the print problems introduced in 10.6.8, but the print jobs still all pause the printer and fail with a 'broken pipe' error. It has nothing to do with the USB cable, as I can print just fine with the printer directly hooked up to my Mac wit that very same cable. I reinstalled the drivers, updated my printer's firmware, ran the repair script twice just to be sure, reset the printing system, even deleted all preference files with 'hp' in the name and having to do with printing, restarted my Mac. All with no result.
    Man, this is so frustrating! Anybody with any other suggestions or possible solutions?

  • IPhone 4s not charging after update to iOS7

    After updated to iOS7 my iPhone 4s will not charge anymore

    I would try plugging in the phone to the wall charger that came with it, and then reset the phone by holding the power and home buttons down until it turns off. Then turn it back on and see how the charging works.
    Also if that doesnt seem to resolve it, take a look at this section from the article named iPhone: Hardware troubleshooting http://support.apple.com/kb/TS2802
    Battery does not charge from the USB power adapter
    Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    Also refer to iPhone and iPod touch: Charging the battery.

  • Has anyone had trouble with safari after updating to ios 8 on ipad

    I am having trouble viewing a web page through safari after updating to ios 8 on my ipad.  On the left side of my screen is a list of my favorites leaving only 3/4 of the screen to view a web page.  Before the ios 8 update when I clicked on the safari icon it took me to a full screen view of my favorites with icons.

    Same issue here, seems to be fine on text based websites, but any with images on struggle to load.
    im on 100mb fibre, and all sites work fone on other devices, just my iPad since upgrading
    its loads the site slowly, displays about 3/4 of the page once loaded

  • TS1702 Anybody having trouble with apps after update to iOS 6.1.3?

    After update to iOS 6.1.3 I received update to accu weather and temple run 2. Now both of these apps are not responding. Anyone else having the same problem?

    Mail app crashed after update. Went by apple store and they determined it was my gmail account. Deleted gmail and now mail works. Also had to delete my work gmail on the exchange server. Exchange works now but I still can't use my personal gmail.

  • Trouble with Email after Update - Help - No Incoming Mail Server

    I updated my iPad 2 to the new IOS 5 software and have been unable to use the mail function.  I have tried deleting the account re-installing, turning on and off the iPad, etc. but it always prompts me with the same message;
    The IMAP server, "apple.imap.mail.yahoo.com" is not responding.  Check your network connection and that you entered hte correct information int eh "Incoming Mail Server" field.
    All the rest of the Network functions seem to be working correctly.  One additional detail - for some reason it does not seem that the "Incoming Mail Server" field downloaded during the update because there are no options (or maybe I do not know how to get to it) on how to change the incoming mail server information.  This is true for both my iPad and iPhone 4. 
    Any suggestions or help? 

    I updated my iPad 2 to the new IOS 5 software and have been unable to use the mail function.  I have tried deleting the account re-installing, turning on and off the iPad, etc. but it always prompts me with the same message;
    The IMAP server, "apple.imap.mail.yahoo.com" is not responding.  Check your network connection and that you entered hte correct information int eh "Incoming Mail Server" field.
    All the rest of the Network functions seem to be working correctly.  One additional detail - for some reason it does not seem that the "Incoming Mail Server" field downloaded during the update because there are no options (or maybe I do not know how to get to it) on how to change the incoming mail server information.  This is true for both my iPad and iPhone 4. 
    Any suggestions or help? 

  • Iphone 5 wont charge after updating IOS

    this *****, I lost factory charger, I know it has to do with the cheap one I have, what can i do

    There's always the buyback program for non-Apple chargers. You get an Apple charger for 10 bucks if you trade in a non-Apple charger.
    http://www.apple.com/support/usbadapter-takeback/

  • Iphone 4s won't charge after updated to ios 6.1.3

    iphone 4s won't charge after updated to ios 6.1.3
    Different adapters and usbs have been tried, and now power has been drained.
    Apple support says there is nothing they can do about it, and they surggested me to pay 199 for a new iphone.
    Is there anybody having the same problem?

    I'm having the same issue with iphone 4.
    Seems to work ok after i connect it to itunes but then the next day i have to do it again.

  • Ipad 3 won't charge after updating to ios 6. even with apple charger

    ipad 3 won't charge after updating to IOS6. even with apple charger. just say "not charging" next to the battery symbol

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

    I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, even after seeing the low battery image, i tried to charge the iphone. Then I tried to connect to itunes. But itunes cant recognize the device. What should I do?

    My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, after seeing the low battery image, i tried to charge the iphone. After charging for 30 minutes, it still wont turn on but keeps on blinking the apple logo. It has been blinking for 2 days. Then I tried to connect to itunes, but itunes cant recognize the device. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • After upgrade to Lion, iPhone won't charge after Mac goes to sleep

    I did a clean install of Lion, and have run Software Update. There are no problems with the system, but I noticed that when I plug the iPhone in to the Mac, it won't charge when the Mac goes to sleep.
    The iPhone gives the normal charging tone when it gets plugged in, and if I l press the Home button, it displays the charging screen. If I select Sleep from the Apple menu, the Mac goes to sleep and the screen on the iPhone blinks on as if not plugged in, showing the normal unlock screen. When I wake the Mac, the phone beeps and shows the charging screen.
    Is there a setting I can change to get the iPhone to continue charging after the Mac goes to sleep?

    This behavior is new in my experience, having been on Snow Leopard. I've always just plugged the iPhone into my keyboard since it is very convenient, and it has always charged overnight, even while the Mac slept. So this is not normal behavior for my system.
    My question is, has this changed in Lion?

  • Have a error code 4013. iphone 4s wont restore after update.

    my iphone will not restore after update. it is stuck in recovery mode. i get error code 4013 everytime a try to restore but i cant find anything on error code 4013.

    DFU mode is also good as stated above, however the instructions for DFU mode are below (please note this is not the same as recovery mode) -
    Plug your device into your computer.
    Turn off the device.
    Hold the Home button and Power button for 10 seconds
    Release the Power Button but keep holding the Home button
    Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
    Make sure the device screen is blank and no logos are present, device screen should remain black.
    Error 4013 is due to security software issues. Uninstall all security software completely, try again, if the issue persists I would either recommend another computer or calling AppleCare tech support at 1-800-APL-CARE (for US customers).
    Note- this is even if your device worked fine prior to iOS 7 update with your security software. The change in the operating system on the device can cause compatibility issues with these other programs.
    I hope this helps it worked for me!

  • IPhone 4 cannot start after update to iOS 7.1

    Hello,
    I have an iPhone 4 with iOS 5.0. I didn't upgrade it to 7.0 because my friends have some problems with performance after updateing to 7.0.
    Today my friend said that iOS 7.1 have fixed issues with performance on iPhone 4&4S, so I updates my OS.
    This is what happend after update from 5.0 to 7.1:
    https://www.youtube.com/watch?v=tL9iVwNry8k&feature=youtu.be
    Any idea what can I do to fix it? I don't have proof of purchase (lost long time ago). I tried hard reset (holding power button for 20+seconds) and problem still exist.
    Anyone have this problem too?

    Thx, but it didn't helped - after reset iPhone still crash on apple logo, and I cannot restore with iTunes, because iTunes didn't recognized my phone.
    I can go tommorow to the iDream, but can they help me if I don't have my proof of purchase?

  • My iphone 3g got locked after updating

    my iphone 3g got locked after updating the software and showing usb cable and itunes symbols

    That means your iPhone was hacked to be unlocked for use with any carrier's SIM card, which is not supported by Apple directly or indirectly via these discussions.
    Installing a firmware update on a hacked iPhone or restoring a hacked iPhone with iTunes relocks the iPhone to the carrier the iPhone was sold as carrier locked when new.

Maybe you are looking for

  • Could not initialize the browser's security component Error message when sending a link

    Using Ubuntu 9.10 64 bit. Firefox version is 3.6.3 and Thunderbird version is 2.0.0.24 When sending a link with Firefox I get an error message "Could not initialize the browser's security component...". Tried deleting the cert8.db and secmod.db. Noti

  • What process needs to be followed for non-encashed checks?

    Hello All, What is the process that is followed for the checks that are issued but are not encashed by the vendor/employees/shareholders for years together, as per my knowledge the said amount is transfered to the government after waiting for a cerat

  • Hp 1005 mfp scan driver for osx 10.8

    i am unable to install scan driver to my new Mac book air os x 10.8.. pl. help if somebody do it

  • POST HTTP/1.1 via GPRS

    Hi, I'm developing an MIDP 2.0 app to use on a Palm device, which use GPRS to connect to a server. I've got a problem using POST requests. By using HTTP1.1, packets are chunked. The problem is that at the server, by tracing incoming packets, I realiz

  • C++ IIOP client implications

    I have some general questions regarding a C++ CORBA iiop client to WLS6.1 (using any orb, but in particular using the tux orb): What are the implications of a CORBA C++ client to EJBs hosted on WLS. What particular limitations exist (theoretical or p