IPhone 5 Video issues

I have an iPhone 5 and just purchased and Otterbox waterproof case. The case works fine.. no leaks however when i shoot video in the pool the video is blurry on occasion. Could this be an actual issue with the iPhone 5 since the case is not leaking?
WHat can I do to problem solve this before going to the Genius bar?

Hello there Drew,
Here are some suggestions for troubleshooting the camera from our iPhone: Hardware Troubleshooting article found here http://support.apple.com/kb/ts2802.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
I realize that you cannot remove the case and test it underwater but at any rate please be careful.
Take care,
Sterling

Similar Messages

Pre Lion iPhone videos show Thumbnail but can't play - new video generates Unsupported Video Format popup, no thumb but will play via quicktime

This is really frustrating -
Over the last year I have been uploading all of my photos and occasional iPhone video to Aperture 3 (latest version all patches in place).    Aperture would recognize the video, create a thumbnale and otherwise treat it nicely.
Now, since upgrading to Lion I find that though I can "see" the old videos in their folders or projects and the associated Thunbnale, I can't play them - I either get the spinning color wheel and then nothing or Aperture will crash and report an error relating to Quicktime (sorry don't have an error code at the moment).
If I try and export a video I can - but what I get also can't be played by Quicktime - just a black screen. When I hit Play - the scroll bar moves, but there is no sound or video.
From Final Cut Pro X, I can imoprt this exported video file and see that it appears complete - but FCPX uses it's own playback elements.
If I shoot a new video on my iPhone, I find that I can see the thumbnale in the import option of Aperture when looking at the phone, but once imported I get a Popup telling me that it is an "Unsupported Video Format" - "Do you want to open this video clip with QuickTIme Player?"   If I hit Open then the clip does play, but the thumbnale remains a black square with the warning Exclamation Point.
I have also had some issues with Lion Mail crashing when trying to play a video made on an iPhone and sent to me via email.   Seems more likley to be a Lion / Quicktime issue then an Aperture and Mail issue - but who knows.
I spent 2.5 hours of quality time with the Genius bar this morning. We reinstalled Lion and after that the suggestion was to trash and re-install Aperture, but that would require my disc and of coruse a trip home.   Mail doesn't seem to still have the issues with iPhone movies that it had - but Aperture is still not happy.
Did as instructed and dragged Aperture 3 to the trash, did the empty trash option, restarted and reinstalled.   Then did a software update to catch the new update for Aperture and it found that.   Interestingly when I did start it up after that it DID NOT ask me for my key - so clearly some elements were left over.
Now upon retstarting Aperture 3 once again I find that I can still see my old movies (their thumbnails show up) but I still can't play them.   The new test movie is there but still generates the popup regarding it being an Unsupported Video Format.
And it's not just my iPhone.   Video sent via email from another iPhone can play as an attachment, or when dragged and dropped to the desktop, but once imported into Aperture is once again proclaimed to be an Unsupported Video Format.
Hoping someone out there knows how to resolve this....

For some reason it just started to work now. Have no idea what didn't work before.

IPhone video H.264 will not play in iPhoto '11 Slideshow

Hello,
        I use iPhoto to organize videos and .jpgs; I take videos both with a Sony camera and my iPhone. I often trim videos in iPhoto and then play them as part of a Event or Album, along with .jpgs, using the SlideShow feature before moving on to iMovie or Keynote. Recently I have encountered difficulties with iPhone H.264 videos, particularly in vertical format -- they simply won't play in the iPhoto simple SlideShow and lock it up (a simple X then ends the SlideShow and iPhoto is no longer locked). The vertical iPhone videos work in iMovie if I simply move them there. I have not detected any problems with the Sony videos, which are invariably horizontal. I am not experiencing any other iPhoto issues although my library is >125GB.
     Any Suggestions?
    Thanks for your thoughts.

léonie,
     @#$^$%^ Computers!
     After I realized I could not determine the frame rate (to respond to your post), out of frustration I went back, restored the most troublesome video to original, closed iPhoto, re-opened iPhoto, re-trimed the troublesome video, and .... yep, you guessed it .... it worked fine. It had to be something in the trim process.
     I haven't taken time to check the others that were problematic, but I'm confident that was the problem.
     @#% how much of my time; how much of your time.....but, still far better than the years I spent watching a rotating hourglass.
     Thanks for your interest, your offer to help, and my best to you. (And, my apologies for failing to include the accent grave in your name previously.

Iphone video camera file format

When I used my iphone video camara to record someting, the file used to be saved as mp4 format, but now the video file is saved as mov format. I don't know what happened, but can I go back to mp4?

had issues if I start recording in one mode and then changing it
but if I start in the orientation I want it's good
about HDR then it's a preprossing effect added to the photo
you likely notice it take a bit longer to make the image
imagien that time added between each frames when you record a video
a video is around 30 pictures a secund if each would be delayed that 2-4 sec it take for my photo to be
ready when I use HDR then the whole world would implode

Importing from iPhone video camera?

I'm about to start a an audio/video project and wanted to just put this out there for some advice. 3 Camera iPhone 4 shoot, 1 prerecorded audio track. Not planning on using the audio from the iphones. I've never imported iPhone video into FCE. Any suggestions? Any know problems with this? I'm planning on doing it all in HD. Then syncing the video to the audio track. (The audio track is just an Mp3.) Will this just be super easy and straight forward? I've done this same thing with Canon Vixia HD cameras before and it was no problem. Does the iPhone present any particular issues?
Thanks

Thanks Tom. (BTW, love your book!)
So, how do I convert these files? I've always just dragged things into the timeline before, then rendered them, but I don't want any funny business. Is there a specific way I should prepare these files before I bring them into the project? I'm always a bit confused by this and have had some bad experiences with projects that looked squashed or stretched.
Thanks for your input!
Adam

Transferring iPhone video to Computer

I was finally able to transfer photos/videos from my iPhone 4 Camera Roll to my PC (Windows XP) using Apple Article #HT4083. My issue is that videos under 1 min copied over, but videos over 1 minute get stuck in the transfer process and I end up having to "Skip It" in order to finish the process. Also, once my < 1min iPhone videos transfer over to my iPhotos file under the 'MY PICTURES' folder on my computer, how do I properly transfer them back into my iPhone in the photo albums I choose using iTunes? I moved some of the videos into the folders I created under 'MY PICTURES' along with the photos, but during the Sync process in iTunes, only the photos were transferred back to my iPhone in the newly created album folders, not the videos.

Why should Apple include a utility for this just for Windows users? This is something Microsoft should include with Windows, and I'm pretty sure they do.
There are a number of digital cameras that support capturing photos as well as video. I have a Canon digital camera that I purchased at the end of 2003 which I continue to use that supports capturing photos and video, and I've always used iPhoto for the import, which is included by Apple with OS X.
If the Windows Scanner and Camera Wizard doesn't provide for importing videos that were captured by your iPhone, the driver for your webcam may be the cause of the problem. Have you confirmed if the driver for your webcam is up to date along with all other Windows drivers?

Iphone Video Settings?

Pemier elements has a hard time with my iphone vidieo. If I use the stabilizer the video will not even play. Are there settings to best handle iphone video?

Dixon John
What iPhone version do you have?
I need specific answers to help, and I want to help.
Information such as
There is no setting in project settings for the iphone.
is not going to help me help you. I know what the program has to offer. I need to know how best to apply that to what you have in the way of video properties. And, we will not know that until you share that information with us. If you do not know the properties of your video, we will help you find that information. I suspect it is 1080p (1920 x 1080 @ 29.97 progressive frames per second), but suspect is not good enough as a base for troubleshooting.
You say the Timeline won't render
a. is there an orange or no colored line over the Timeline content?
b. do you have the gray tabs of the Work Area Bar set to span the entire content of what is to be rendered?
What does the Timeline content look like at playback without VideoStabilizer? Does it playback at all? I imagine it should since you are applying a Video Stabilizer to it.
After you apply the VideoStabilizer, are you applying the detaults or customizing the settings for it? If customizing, in what way? The VideoStabilizer probably has the most dramatic affect (increasing) on rendering time for Timeline content to which it is applied. The nature of the clip plus the VideoStabilizer settings may have created this
with stabilizer the video wont play,
I think you get the idea of what is involved. Please allow us to help you sort out the details which you have on this and which we need for you to share with us to help you.
Thanks.
ATR
Add On...I have tested iPhone 5 video on Premiere Elements and found it to work. The classical issue with cell phone video is report of out of sync audio. If not corrected by correct Premiere Elements project settings, several of such users have found resolution in the matter by changing the variable to constant frame rates. Programs such as QuickTime Pro has been mentioned in this context. Also, use of Handbrake in this matter has help some.

IPhone video has a strange FPS.

There has been a lot written about "choppy playback" of iPhone video once it's trasferred to another device. It seems to me that the problem is in the frame rate used in the original video. In Quicktime, I'm seeing an actual frame rate on playback of something like 18 FPS, when the file is stamped with 30 FPS. When will this issue be resolved by Apple? And for now, what is the best work around? I've already begun experimenting with different settings during export from Quicktime. Choosing iPhone as a setting creates a .m4v file, but the image size is greatly reduced, and the conversion is very time consuming. Howeber the frame rate issue seems to be resolved--no more choppy playback and the new file is playing back at a true 30 FPS (or maybe it's 29.97 but that's another topic).
It's been said before but I'll say it again: it's beyond belief that Apple can release hardware and software that is this buggy! Even for the most novice user, this is totally unacceptable. They love to say "it just works". Well it doesn't.
Anyone with me on this?
Peter

Thanks for your response JD. How can I tell if my MacBook Pro includes hardware MPEG-4 decoding? My MBP specs are:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Serial Number (system): W892518Q91T
Hardware UUID: 14CDAEBD-197D-58FD-B89C-70DEDC7BA917
Sudden Motion Sensor:
State: Enabled
NVIDIA GeForce 9600M GT:
Chipset Model: NVIDIA GeForce 9600M GT
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0647
Revision ID: 0x00a1
ROM Revision: 3436
gMux Version: 1.7.10
Displays:
Color LCD:
Resolution: 1920 x 1200
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
AFIK, this is all fairly late model Apple hardware and was top of the line when I bought it 3 years ago. Also keep in mind I don't have any issues playing back any other HD content. Only files created on the iPhone 4s.
It doesn't matter if I have other apps running or not--the symptom persists.
I've observed two seemingly identical video files created on my iPhone 4s (using Get Info in Quicktime all parameters are equal) where one plays smoothly and one has the jumpiness. Other times a file that had been playing smoothly starts acting jumpy again after reopening. Bear in mind, the jumpiness doesn't behave like a CPU being overloaded, but is a very regular rhythm--about a jump every second. I would expect an overloaded CPU to produce more random symptoms during playback. I'm now seeing the jumpiness even in the videos I exported using Picasa. Keep in mind, I did not "upload to Picasa Web Albums" but just exported to another location on my internal hard disk. The specs on the exported files look the same as the original including the data rate, which is 21.7 mbits/sec. In other words, they were not optimized for streaming. Why they played back smoothly before and not now is baffling.
Some have speculated that movies created with the camera upside down maybe have some extra data attached in order to play back in the correct orientation. However in most cases my problem files were recorded "right side up" and still they have the jerkiness upon playback.
Finally, you state that 720p is the default iPhone image size but these files appear to be 1080 (progressive or interlaced I don't know). Isn't that what 1920 x 1080 implies? And again, the data rate is 21.7 mbits (is that the same as the bitrate, which you said should be 11 Mbps?).
Your help in this matter is greatly appreciated.

Intel and IPhone Sync issues

Some forwarded this to me. It might be relevant to some users here.
"Senior Editor, iLounge
Published: Thursday, November 5, 2009
News Category: iPhone
Intel has issued a comment concerning the iPhone sync issues some users are experiencing with certain PCs containing a specific Intel chipset. “Our leading theory is a BIOS or system configuration issue, but we are still investigating,” Intel said. The basic input/output system (BIOS) is the boot firmware run by a PC on startup, which identifies, tests, and initializes core system devices such as the graphics card, hard disk, and other hardware. As we reported earlier this week, the syncing issue appears to linked to Intel’s P55 Express chipset and its USB controller, which leaves the afflicted machines able to recognize the iPhone but unable to sync. The problem has been most prevalent among PCs running 64-bit Windows 7, but the issue has also been reported on machines running both 32-bit and 64-bit versions of both Windows 7 and Vista."

Hi R@chel,
It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Specifically -
Hi R@chel,
It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Specifically -
Syncing manually
If you prefer not to automatically sync content to your device, you can set up manual syncing:
Connect your device to your computer and open iTunes.
Click the Devices button in the upper-right corner. (If you're viewing the iTunes Store, click the Library button in the upper-right corner. The Devices button will appear.)
In the main iTunes browser window, select the Summary tab.
Select the option to Manually manage music and videos or Manually manage music. This will deselect the automatic sync settings for the Music, Movies, and TV Shows tabs.
Click Apply.
And -
After following the steps above, you can add individual songs, videos, and playlists from iTunes to your device. To add content to your device:
Select your device.
Click On this Device.
Choose Add to in the upper-right corner. If you drag a song, video, TV show, or movie while viewing the media in your iTunes library, a sidebar will show up on the right. You can drag your content onto the device. You can also create and modify playlists directly on the device.
Thanks for using Apple Support Communities.
Best,
Brett L
Thanks for using Apple Support Communities.
Best,
Brett L

Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home. Any suggestions on where to look to fix this?

Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home. Any ideas on how to fix this?

That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

Jabber for iPad video issue

How can I troubleshoot video issues?
I setup the iPad device (G711) and then placed a call to a Jabber for Windows (G729) phone. Audio worked fine but no video. I changed the Jabber for Windows to G711 and video started working?
Is Jabber for iPad going to support G729 and if so when?
Thanks,
Doug

Hello i have the same issue!
Someone find the cause for this issue?
Regards
Leonardo Santana

Kernel Panic on iMac with Pixelated Video Issues

One of our work iMacs has been having weird pixelate video issues recently. Sometimes previews of program windows will freeze on screen... and as you move the window around the screen "erases" this preview from the LCD... It is a 2006 24" White iMac 6,1. Now we get some Kernel Panics with the following error message. Please help me decipher it. Thanks!
Interval Since Last Panic Report: 8641685 sec
Panics Since Last Report:          1
Anonymous UUID:                    E865F049-A575-4D59-A574-9D24C6EFD141
Fri Mar 30 07:35:41 2012
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x43923bb8 : 0x21b837 (0x5dd7fc 0x43923bec 0x223ce1 0x0)
0x43923c08 : 0x2abf6a (0x59e3d0 0x53c01f 0xe 0x59e59a)
0x43923ce8 : 0x2a1a78 (0x43923d00 0x0 0x43923da8 0x53c01f)
0x43923cf8 : 0x53c01f (0xe 0x48 0x10 0x10)
0x43923da8 : 0x53d2f5 (0x78f3000 0x785c240 0x43923df8 0x78f3000)
0x43923dc8 : 0x570fcd (0x78f3000 0x785c240 0x43923de8 0x2a45c9)
0x43923e18 : 0x28bb49 (0x78f3000 0x749a4a0 0x749a4b8 0x2106d8)
0x43923e58 : 0x21dbe5 (0x749a0a4 0x749a484 0x43923ea8 0x3a23)
0x43923e98 : 0x210a86 (0x749a000 0x0 0xbc747a0 0x7f6b690)
0x43923ef8 : 0x216f84 (0x749a000 0x0 0x0 0x0)
0x43923f78 : 0x295c57 (0x7daf5e8 0x0 0x0 0x0)
0x43923fc8 : 0x2a256d (0x7daf5e4 0x0 0x10 0x0)
BSD process name corresponding to current thread: Dock
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: iMac6,1 (Mac-F4218FC8)
System uptime in nanoseconds: 154254231492
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 121081986701
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.InternalModemSupport          2.6.2
com.apple.driver.AudioAUUC          1.57
com.apple.driver.AppleIntelYonahProfile          14
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleIntelPenrynProfile          17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleIntelNehalemProfile          11
com.apple.driver.AppleHDA          2.0.5f14
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleGraphicsControl          2.10.6
com.apple.GeForce          6.3.6
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleBacklight          170.0.46
com.apple.driver.AppleLPC          1.5.1
com.apple.driver.AppleIRController          303.8
com.apple.driver.CSRHIDTransitionDriver          2.4.5f3
com.apple.driver.USBCameraFirmwareLoader          1.1.0
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleUSBHub          4.2.4
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AirPortBrcm43xx          423.91.27
com.apple.driver.AirPortBrcm43224          428.42.4
com.apple.iokit.AppleYukon2          3.2.1b1
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBUHCI          4.2.0
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.1
com.apple.nvidia.nv40hal          6.3.6
com.apple.NVDAResman          6.3.6
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.driver.CSRUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
com.apple.iokit.IOUSBMassStorageClass          2.6.7
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.iokit.IOATAPIProtocolTransport          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.driver.XsanFilter          402.1
com.apple.driver.AppleFileSystemDriver          2.0
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          6
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
Model: iMac6,1, BootROM IM61.0093.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 4 GB, SMC 1.10f2
Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST3320620AS, 298.09 GB
Parallel ATA Device: MATSHITADVD-R   UJ-85J
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Express USB2, 0x0dc4 (Macpower Peripherals Ltd.), 0x00db, 0xfd500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x1d100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc50a, 0x1d110000 / 4
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x1d130000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x7d100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x7d200000 / 3

Re: Kernel Panic on iMac Intel Core 2 Duo with Lion 10.7.1, 4gb RAM
27-sep-2011 11:53 (in response to jose guzman) Launch the Apple Hardware Test program, run the extended tests at least twice, and then download and run Rember. All indications are that you have bad or flaky RAM.
27" i7 iMac 10.6.8 , Mac OS X (10.7.1), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)
I did that and it doesn't work

HT5313 What video issues were there on 10.7.4 that got fixed in 10.7.5? Any details?

The OS X update bulletin for 10.7.5 lists that one of the fixes in this update is
* Resolve a video issue with some VGA projectors when connected to certain Mac notebooks.
What is really being addressed? Any details?

Hi Tony, Ben and others,
I'm not sure it was the same problem, but a little while ago I have problems too with RADIUS not working on Lion,
and by searching for solutions I found out that it's necessarily to edit /etc/raddb/clients.conf
My problem here it didn't work was with the shared secret.
So I edited /etc/raddb/clients.conf and put at the end of the file :
client 10.0.0.0/24 {
        secret          = shared-secret-type-what-you-want-here
        shortname       = private-network
BEFORE I started RADIUS and added AE's to it
I hope it solves your problem too …
GreetingZz John
PS For some strange reason I had to change the
      'Wireless Security" from WPA2 Personal ---> WPA2 Enterprice on each AE manualy
     But maybe that's just a little bug in when opening the AE in Airport Utility 6.1 cause is WAS
     working before I looked into the AE's
PPS iPV6 not changed here
Message was edited by: Abhor

I want to automatically extract my iphone-videos from the iPhoto library since I have way over 25 000 objects in there. Afterwards I would like to import them into iMovie. Anyone having an idea?

Dear all,
I want to automatically extract my iphone-videos from the iPhoto library since I have way over 25 000 objects in there. Afterwards I would like to import them into iMovie. Anyone having an idea? Or is there no possibility to do so?
Thanks in advace
Andreas

File -> New Smart Abum
Photo -> Is -> Movie
and export those:
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

What's the best way to import and manage iPhone video?

I don't really want to use iPhoto for importing video - it doesn't seem like it's built with that in mind even though it's the default option for importing both photos and videos. It doesn't have very good (if any) options for filtering just videos or just photos, either when viewing or importing. And I don't want to have videos all jumbled in with photos in my iPhoto library.
I also don't really want to use iMovie every time I want to import videos. I know it's designed for video, but it's far more of an editing app than a management app and I don't want to be editing all my videos or loading up iMovie just to browse them.
I considered Clipstart but it commits a cardinal sin when it renames all my videos in the Finder to a sequential numbering that begins at 01.mov for each new day, creating hundreds and thousands of identically titled movies in the video library, albeit in their own folders, but chaos if you want to search in Spotlight or anything.
So I'm left with Image Capture, which gives me complete control of what I import and where it goes. The problem is that it too doesn't offer a filter for seeing just the videos or just the photos on my iPhone. My photos are all being imported automatically by Photostream so I only want to grab the videos. If I set 'view by width' it seperates out the videos because they have no width tag, but then they aren't displayed by date order so I can't easily find the new videos I've not imported before.
So... what do you do?

That's exactly the sort of crafty workaround I like. I didn't know they were all tagged, but that would definitely work. I'd still love a dedicated app that did it really well, or more love given to that side of things in iPhoto. iMovie is too hefty for just managing them.
Is iPhoto properly built to handle management of iPhone video, by the way? I didn't want to use it because it didn't seem like it was, and also because I sync my iPhoto library with Dropbox and video would more than treble the size of the library so I manage it from the Finder mostly, importing clips to iMovie if I do want to edit something (rarely).

Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through. Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center. Neither of these programs are able to start, from startup or even manually. They just won't run. Sound seems to come out fine still, but I do have video issues.
First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port. I still get an image, but it's set to current screen resolution instead of 1080i. I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens. Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen. I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires. When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer. So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
I did try updating the software with what's available through the support site, but nothing happened. I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software. Giving the audio and video a complete clean slate to work from, and got no positive results. I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv. Problems as described above still apply.
Anybody else have this issue? Anybody got a fix?

have you found a solution to this?
My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
*edit*
this worked for me i stumbled across this
I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked.

IPhone 5 Video issues

Similar Messages

Maybe you are looking for