Iphone 5 wifi problem (only fails to connect at home)

Accidentally changed HTTP Proxy to Auto(I turned it off now) while using home wifi,
now my iphone 5 wouldn't connect to my home wifi (Home only, works anywhere else)
Tried : Restoring phone to factory setting, restarting phone, forget network

When you restored, did you restore as new, or from a backup? Try going into Settings>General>Reset>Reset network settings. See if that helps.

Similar Messages

  • My iphone wifi problem wont detect any wifi networks and wont detect any bluetooth networks.

    my iphone wifi problem wont detect any wifi networks and
    wont detect any bluetooth networks.

    https://support.garmin.com/support/searchSupport/case.faces?caseId=%7Bb62e0460-4 d48-11e3-f27b-000000000000%7D from the Garmin Support site.  The iPhone 4 is not compatible because it does not support the low energy bluetooth transfer that the iPhone 4s and later do.
    It should connect properly with your iPad mini, but it requires an App.  Also mentioned on Garmins' site.

  • Hi, I'm on my iPhone wifi problem by disabling my WiFi does not deal kindly help me

    Hi, I'm on my iPhone wifi problem by disabling my WiFi does not deal kindly help me

    Hi 481525018,
    Welcome to the Support Communities!
    The article below may be able to help you troubleshoot your Wi-Fi issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398?viewlocale=en_US
    Cheers,
    - Judy

  • Iphone 4s wifi problems disconnecting and then connecting also doesn't load.

    This is a Iphone 4s. So 2 days ago, my wifi kept greying out and every time it connects again to the internet it doesn't work and it also is very slow and then suddenly it disconnects, i have tried this and it is the same for every wifi connection. I have tried the trouble shooting steps, restored my iphone, restarted it, turned it on and off and it still doesnt help. I have recently read articles about people having the same problem as me because they updated there i os, but i dont know if i have the same problem or what. I have called up apple today and they said that my phone has expried from warrenty, so i need to try the trouble shooting steps but they won't work. Also, when I click on my wifi it says "unable to connect". Anyone suggest things i should do? Thnak you

    Having this same issue. Went to the Apple store and called support numerous times ... Apple will not admit there is a problem and instead convienantly found that a water damage sensor in the earplug jack was tripped. Even though they took it apart and found no water damage sensors tripped internally, they basically told me my warranty was void. Apple is avoiding the issue with the WIFI on the iPhone 4s ..... sorry

  • Wifi scans but fails to connect on Thinkpad W520

    Running Network Manager on a Lenovo Thinkpad W520 and able to scan but unable to connect to wifi.  Wifi works fine in dualboot on Windows, and ethernet works fine in both.
    $ lspci -vv
    03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
    Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 35
    Region 0: Memory at d5300000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: <access denied>
    Kernel driver in use: iwlwifi
    $ sudo systemctl status NetworkManager-wait-online.service
    ● NetworkManager-wait-online.service - Network Manager Wait Online
    Loaded: loaded (/usr/lib/systemd/system/NetworkManager-wait-online.service; enabled; vendor preset: disabled)
    Active: failed (Result: exit-code) since Sun 2014-12-21 22:58:55 EST; 12min ago
    Main PID: 500 (code=exited, status=1/FAILURE)
    Dec 21 22:58:55 Defiant systemd[1]: NetworkManager-wait-online.service: main process exited, code=exited, status=1/FAILURE
    Dec 21 22:58:55 Defiant systemd[1]: Failed to start Network Manager Wait Online.
    Dec 21 22:58:55 Defiant systemd[1]: Unit NetworkManager-wait-online.service entered failed state.
    Dec 21 22:58:55 Defiant systemd[1]: NetworkManager-wait-online.service failed.
    $ sudo systemctl status NetworkManager-dispatcher.service
    ● NetworkManager-dispatcher.service - Network Manager Script Dispatcher Service
    Loaded: loaded (/usr/lib/systemd/system/NetworkManager-dispatcher.service; enabled; vendor preset: disabled)
    Active: inactive (dead)
    $ sudo systemctl status NetworkManager.service
    ● NetworkManager.service - Network Manager
    Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled; vendor preset: disabled)
    Active: active (running) since Sun 2014-12-21 22:58:23 EST; 13min ago
    Main PID: 341 (NetworkManager)
    CGroup: /system.slice/NetworkManager.service
    └─341 /usr/bin/NetworkManager --no-daemon
    Dec 21 23:10:12 Defiant NetworkManager[341]: <info> Activation (wlp3s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
    Dec 21 23:10:12 Defiant NetworkManager[341]: <info> (wlp3s0): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
    Dec 21 23:10:12 Defiant NetworkManager[341]: <info> Disabling autoconnect for connection 'Bifröst'.
    Dec 21 23:10:12 Defiant NetworkManager[341]: <warn> Activation (wlp3s0) failed for connection 'Bifröst'
    Dec 21 23:10:12 Defiant NetworkManager[341]: <info> Activation (wlp3s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
    Dec 21 23:10:12 Defiant NetworkManager[341]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
    Dec 21 23:10:12 Defiant NetworkManager[341]: <info> (wlp3s0): deactivating device (reason 'none') [0]
    Dec 21 23:10:12 Defiant NetworkManager[341]: <warn> Connection disconnected (reason -3)
    Dec 21 23:10:12 Defiant NetworkManager[341]: <info> (wlp3s0): supplicant interface state: completed -> disconnected
    Dec 21 23:10:15 Defiant NetworkManager[341]: <warn> Could not get scan request result: Scan request rejected
    Additionally, after stopping NetworkManager and trying wifi-menu, it scans correctly but fails to connect, never even prompting for a passphrase.
    So I tried wpa_supplicant on its own:
    $ sudo wpa_supplicant -B -i wlp3s0 -c <(wpa_passphrase "Bifr\xc3\xb6st" "mypassword")
    Successfully initialized wpa_supplicant
    wlp3s0: failed to initialize driver interface
    For good measure:
    $ rfkill list
    0: tpacpi_bluetooth_sw: Bluetooth
    Soft blocked: no
    Hard blocked: no
    1: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    2: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
    $ ip a
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether f0:de:f1:62:13:b8 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.11/24 brd 10.0.0.255 scope global enp0s25
    valid_lft forever preferred_lft forever
    3: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:24:d7:c6:ab:48 brd ff:ff:ff:ff:ff:ff
    I'm at a loss. and I've googled my little heart out.  Any help would be appreciated.

    Welcome to the forums - and thanks for a great initial post, all the needed information seems to be here.
    Specifically, the following error from wpa_supplicant will most likely be best to dig into:
    wlp3s0: failed to initialize driver interface
    I see several results of this error in a google search, but none of them quickly translated into solutions yet.  To get some more information on it, could you run the same wpa_supplicant command, but with the verbose debugging flag "-dd" and post the ouput here?
    I don't have a intel wireless card, so I don't know what the diagnostic signs are for the problem addressed in the wiki, but you may want to try the modprobe options shown in this section of the wiki.
    EDIT: there is a similar but unresolved thread on these forums here which points to using the -D flag for wpa_supplicant to specify other drivers.  I was thinking this too upon my first reading, but I don't fully understand what these are so I was reluctant to suggest it.  It certainly can't hurt anything to use the command in the wiki to see which drivers are available, then try each one.
    EDIT 2: and this thread seems to indicate that the -D flag driver specification is the right solution.  So start here with the -D flag and only if that fails follow up with my initial debugging suggestions.
    Last edited by Trilby (2014-12-22 12:52:13)

  • IPhone WiFi Problem

    I cannot get my IPHONE to access the internet via WiFi from home. Hot Spots work fine. I have updated the firmware on my Linksys router and talked with tech support from Cox (my ISP) and Linksys in India. The WiFi on the IPHONE does connect to the router and can connect to a web server on my LAN but I cannot access the Internet.
    Apple tech support thinks it's the router, Linksys thinks it's the Cable Modem and Cox says it can't be them. I have disabled all encryption and all house computers connect as well as a WiFi HP IPAQ. I have even tried a Motorola router with no success. Anyone have any Ideas?

    Had the same problem....maybe this can help...
    http://www.anyiphone.com/2007/06/30/iphone-wifi-tips/

  • Iphone wifi hotspot is attraction another 'connection'

    Hi
    I have an iPhone 5 and set up a hotspot wifi connection with a password.  I am only connecting to the hotspot with my iPad - I have no other devices or cables to connect the 2 items.  However I have noticed sometimes my iPhone tells me there are 2 connections to my hotspot.  I changed the password but the second connection keeps appearing on and off.  I presume this is because my wifi signal is not great (I have trouble finding it when the iPhone and iPad are sat on top of each other!) but I'm not sure what else it could be.
    I am concerned someone is hacking my wifi and I would like to know if it is another user, who they are, how I can block them.  Can anyone help?
    Thanks

    No I wasn't using any cables, I don't have a laptop, just the iPhone and iPad.
    But the idea of a zombie connection could be it.  The second connection turns on about 1minute after the original connection and it does come and go a couple of times in a 5 minute window.
    It would still be nice to see the names of who is connected to the hotspo to be suret - is there any app or software for this?

  • IPhone Wifi problems and Warranty Query.

    Hi there,
    I've been having serious trouble with my iPhone, the problem is that it won't pick up a wifi signal unless I hold the phone literally a foot away from the router (I've tried this with 3/4 routers I've had access to).
    I've tried restoring the iPhone as well as trying all the fixes mentioned in the Apple article regarding the issue such as resetting network settings, etc.
    I phoned Apple and they said that seeing my iPhone was purchased in Spain that they can't fix it here in the U.K. I thought this was diabolical considering that the warranty is a worldwide one, or at least I thought that it was.
    Could someone clarify this issue as I find it hard to believe that an international company would have such localised policies regarding warranty validity.

    While most Apple warranties are world wide, the iPhone warranty can only be used in the country where the iPhone was originally sold:
    http://www.apple.com/support/iphone/service/faq/#repair2
    +Can I get my iPhone serviced outside the country of purchase?+
    +No, service for eligible repairs is only available in the country where your iPhone was originally purchased.+
    If you want it replaced, you will have to deal with Apple's departments in Spain.
    Message was edited by: Ansuz82

  • G580 WIFI Problem ONLY at school (redirected website for wifi password)

    Hi all,
    I recently purchased a lenovo G580 laptop; windows 8
    My laptop wifi works perfectly when I am at home or connected to any normal wifi.
    It does not work when I am at school which typically once you connect to the school's wifi, it opens up a web broweser asking for your usename and password to get compelte access. (figure 1- from my other laptop)
    My lenovo laptop cannot download this website, therefore I have no internet access at school since I cannot put my information inside. (figure 2- from lenovo laptop)
    The problem is not my school's router because I have wifi connection on my other laptop here without any problems. Also the problem is not really the location/wifi of my lenova laptop because I can connect to my phone's personal hotspot when I am at school.
    Simply, the problem is found when I cannot connect to my school's wifi because it requires me to download a site to put my information.
    I have read other forums and try to figure it myself, however, I am very noobie when it comes to computers. So I appreciate a step-by-step instructions. For example, please provide links that I may need to download to update my driver.
    I have called customer care, and I am not going to pay 100 bucks just to fix a simple problem. So i appreciate your time.

    check whether you have set up your wifi settings correctly.(i mean 'servers' and login credentials ).

  • My iPhone 4 will only find and connect to the wifi if in standing within 2 metres range. None of the other iPhone 4's in my house have this problem

    It only happened recently. If i am in a few metres range from the router it will connect. However if I go further away it will not.. It is driving me crazy and it isn't happening to any of the other iPhones in my house. I rang Apple and they told me to backup and update the software, when I did this my phone would connect ton the wifi.. For 2 days, and then began dropping out again. Can anyone tell me what do to if they share the same problem or have had this problem? Thanks!

    You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.

  • 10.7.3 MBP Wifi Problem - Endless Timeouts & Dropped connections

    I've been reading around here a bit already and so I know many other people are having Wifi issues with Lion, but given that there are so many discussions and so many pages of talk, it's hard to go through it all, and using the search I haven't found anything that's quite similar to what I'm experiencing, so I'm starting a new topic...
    Basically, I've got a late 2006 MacBook Pro, installed 10.7.1 (form 10.6.8) on in back in Aug 2011 and everything seemed to be fine. I updated to 10.7.2 sometime in Jan and still didn't notice any issues, but wasn't using Wifi at all at the time.
    Then in Feb I moved and started using wifi (with a Cisco N router), and noticed that often, the system would not automatically reconnect to the network after waking up from sleep. Just selecting the network manually worked on the first try every time though, so it wasn't so bad.
    At the end of April, I finally got around to installing the 10.7.3 update. I read it was supposed to fix wifi issues and so was looking forward to it. It installed fine and didn't seem to cause any problems...
    2 days later I moved again (to India), and all **** broke loose... Now, I can rarely connect to wifi (a Beetel G router, configed with WPA). Around 25% of the time, the network won't show up in the list (despite being a clear 5ft from the base station), and when it does show up, 95% of the time I get a "connection timeout" error - often immeadiately, but sometimes it takes about 10sec to respond. On the same network, 2 Win 7 Dells and an iPad 1 all work flawlessly - it's not the router...
    One the occasions that I am able to connect, it usually works fine, but if I put the computer to sleep and wake up again, there's no guarentee that the connection will work again - it's back to the lottery. And sometimes even when it's connected, the wifi stays (according to the menu indicator) but the internet connection disappears (to the point I can't even ping the router - 100% packet loss, let alone any internet server)
    I've tried zapping everything I can think of (PRAM, SMC), repairing permissions, clearing the remembered networks from the System Prefs, deleting old Locations and creating new ones etc. I have a clean install of 10.7.1 that I booted off of, but it still had the same issues!
    Here's the Wifi output from System Profiler (trying to use "Home Network"):
    Software Versions:
      CoreWLAN:          2.1.2 (212.1)
      CoreWLANKit:          1.0.2 (102.2)
      Menu Extra:          7.0.2 (702.1)
      configd plug-in:          7.1.2 (712.1)
      System Profiler:          7.0 (700.3)
      IO80211 Family:          4.1.2 (412.2)
      WiFi Diagnostics:          1.0.1 (101.1)
      AirPort Utility:          6.0 (600.92)
      Interfaces:
    en1:
      Card Type:          AirPort Extreme
      Firmware Version:          Atheros 5416: 2.1.14.9
      MAC Address:          00:XX:XX:XX:XX
      Locale:          FCC
      Country Code:          IN
      Supported PHY Modes:          802.11 a/b/g/n
      Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
      Status:          Not Associated
      Local Wi-Fi Networks:
    Home Network:
      PHY Mode:          802.11g
      BSSID:          80:a1:d7:4a:d0:02
      Channel:          1
      Network Type:          Infrastructure
      Security:          WPA Personal
      Signal / Noise:          -77 dBm / -96 dBm
    MGMNT:
      PHY Mode:          802.11g
      BSSID:          80:a1:d7:4a:d0:03
      Channel:          1
      Network Type:          Infrastructure
      Security:          WEP
      Signal / Noise:          -77 dBm / -96 dBm
    RC:
      PHY Mode:          802.11g
      BSSID:          00:1e:40:57:67:61
      Channel:          6
      Network Type:          Infrastructure
      Security:          WPA Personal
      Signal / Noise:          -97 dBm / -96 dBm
    Vivek:
      PHY Mode:          802.11g
      BSSID:          00:24:b2:94:ea:06
      Channel:          11
      Network Type:          Infrastructure
      Security:          WEP
      Signal / Noise:          -94 dBm / -96 dBm
    nischai:
      PHY Mode:          802.11n
      BSSID:          58:6d:8f:c3:ea:2a
      Channel:          6
      Network Type:          Infrastructure
      Security:          WPA2 Personal
      Signal / Noise:          -90 dBm / -96 dBm
    noor:
      PHY Mode:          802.11g
      BSSID:          00:24:b2:7e:26:72
      Channel:          11
      Network Type:          Infrastructure
      Security:          WPA Personal
      Signal / Noise:          -90 dBm / -96 dBm
    One thread here I read had someone suggesting to run the Airport debugger in Terminal and posting the output - here's the results:
    Sat May  5 09:52:00.823 <kernel> IO80211ScanManager::startScan: Broadcast scan request received from pid 622 ().
    Sat May  5 09:52:00.824 <kernel> IO80211ScanManager::startScan: Initiating scan.
    Sat May  5 09:52:00.824 <kernel> __ieee80211_newstate: INIT -> SCAN (arg 0xffffffff)
    Sat May  5 09:52:00.824 <kernel> ieee80211_check_scan: active scan, duration 24000, desired mode auto, append, nopick
    Sat May  5 09:52:00.824 <kernel> ieee80211_start_scan: active scan, duration 24000, desired mode auto, append, nopick
    Sat May  5 09:52:00.824 <kernel> scan_next: chan   1g ->   1g [active, dwell min 8 max 8]
    Sat May  5 09:52:00.865 <kernel> [80:a1:d7:4a:d0:02] new beacon on chan 1 (bss chan 1) "Home Network"
    Sat May  5 09:52:00.865 <kernel> [80:a1:d7:4a:d0:02] caps 0x411 bintval 100 erp 0x4 
    Sat May  5 09:52:00.873 <kernel> [80:a1:d7:4a:d0:03] new beacon on chan 1 (bss chan 1) "MGMNT"
    Sat May  5 09:52:00.873 <kernel> [80:a1:d7:4a:d0:03] caps 0x411 bintval 100 erp 0x4 
    Sat May  5 09:52:00.909 <kernel> scan_next: chan   1g ->   6g [active, dwell min 8 max 8]
    Sat May  5 09:52:00.917 <kernel> [58:6d:8f:c3:ea:2a] new probe_resp on chan 6 (bss chan 6) "nischai"
    Sat May  5 09:52:00.919 <kernel> [58:6d:8f:c3:ea:2a] caps 0x411 bintval 100 erp 0x4 
    Sat May  5 09:52:00.920 <kernel> [58:6d:8f:c3:ea:2a] new probe_resp on chan 6 (bss chan 6) "nischai"
    Sat May  5 09:52:00.920 <kernel> [58:6d:8f:c3:ea:2a] caps 0x411 bintval 100 erp 0x4 
    Sat May  5 09:52:00.928 <kernel> [58:6d:8f:c3:ea:2a] new probe_resp on chan 6 (bss chan 6) "nischai"
    Sat May  5 09:52:00.928 <kernel> [58:6d:8f:c3:ea:2a] caps 0x411 bintval 100 erp 0x4 
    Sat May  5 09:52:00.992 <kernel> scan_next: chan   6g ->  11g [active, dwell min 8 max 8]
    Sat May  5 09:52:01.47  <kernel> [00:24:b2:7e:26:72] new beacon on chan 11 (bss chan 11) "noor"
    Sat May  5 09:52:01.47  <kernel> [00:24:b2:7e:26:72] caps 0x411 bintval 100 erp 0x0 
    Sat May  5 09:52:01.75  <kernel> scan_next: chan  11g ->   7g [active, dwell min 8 max 8]
    Sat May  5 09:52:01.158 <kernel> scan_next: chan   7g ->  13g [active, dwell min 8 max 8]
    Sat May  5 09:52:01.241 <kernel> scan_next: chan  13g ->  52a [passive, dwell min 8 max 8]
    Sat May  5 09:52:01.327 <kernel> scan_next: chan  52a ->  56a [passive, dwell min 8 max 8]
    Sat May  5 09:52:01.409 <kernel> scan_next: chan  56a ->  60a [passive, dwell min 8 max 8]
    Sat May  5 09:52:01.492 <kernel> scan_next: chan  60a ->  64a [passive, dwell min 8 max 8]
    Sat May  5 09:52:01.575 <kernel> scan_next: chan  64a ->  36a [active, dwell min 8 max 8]
    Sat May  5 09:52:01.657 <kernel> scan_next: chan  36a ->  40a [active, dwell min 8 max 8]
    Sat May  5 09:52:01.741 <kernel> scan_next: chan  40a ->  44a [active, dwell min 8 max 8]
    Sat May  5 09:52:01.823 <kernel> scan_next: chan  44a ->  48a [active, dwell min 8 max 8]
    Sat May  5 09:52:01.906 <kernel> scan_next: chan  48a ->   2g [active, dwell min 8 max 8]
    Sat May  5 09:52:01.920 <kernel> [04:4f:aa:b4:dc:f9] new beacon on chan 2 (bss chan 2) ""
    Sat May  5 09:52:01.920 <kernel> [04:4f:aa:b4:dc:f9] caps 0x431 bintval 100 erp 0x0 
    Sat May  5 09:52:01.992 <kernel> scan_next: chan   2g ->   3g [active, dwell min 8 max 8]
    Sat May  5 09:52:02.74  <kernel> scan_next: chan   3g ->   4g [active, dwell min 8 max 8]
    Sat May  5 09:52:02.157 <kernel> scan_next: chan   4g ->   5g [active, dwell min 8 max 8]
    Sat May  5 09:52:02.239 <kernel> scan_next: chan   5g ->   8g [active, dwell min 8 max 8]
    Sat May  5 09:52:02.321 <kernel> scan_next: chan   8g ->   9g [active, dwell min 8 max 8]
    Sat May  5 09:52:02.388 <kernel> [00:26:15:61:4c:87] new beacon on chan 9 (bss chan 9) "BSNL_AP"
    Sat May  5 09:52:02.388 <kernel> [00:26:15:61:4c:87] caps 0x431 bintval 100 erp 0x0  country info  49 4e 49 01 0d 14
    Sat May  5 09:52:02.403 <kernel> scan_next: chan   9g ->  10g [active, dwell min 8 max 8]
    Sat May  5 09:52:02.486 <kernel> scan_next: chan  10g ->  12g [active, dwell min 8 max 8]
    Sat May  5 09:52:02.569 <kernel> scan_next: chan  12g -> 149a [active, dwell min 8 max 8]
    Sat May  5 09:52:02.655 <kernel> scan_next: chan 149a -> 153a [active, dwell min 8 max 8]
    Sat May  5 09:52:02.738 <kernel> scan_next: chan 153a -> 157a [active, dwell min 8 max 8]
    Sat May  5 09:52:02.821 <kernel> scan_next: chan 157a -> 161a [active, dwell min 8 max 8]
    Sat May  5 09:52:02.903 <kernel> scan_next: chan 161a -> 165a [active, dwell min 8 max 8]
    Sat May  5 09:52:02.991 <kernel> scan_next: done, [ticks 32630, dwell min 8 scanend 56413]
    Sat May  5 09:52:02.993 <kernel> __ieee80211_newstate: SCAN -> INIT (arg 0xffffffff)
    Sat May  5 09:52:02.993 <kernel> ieee80211_init_node[1132] old_auth 5
    Sat May  5 09:52:02.994 <kernel> IO80211ScanManager::getScanResult: All scan results returned for pid 622.
    Sat May  5 09:52:05.765 <airportd[804]> _handleNewMessage: Received XPC message, event = ASSOC_EVENT, pid = 622
    Sat May  5 09:52:05.766 <airportd[804]> associate: INFO: airportd associate: network=<CWNetwork: 0x7f9fd8c11fc0> [ssid=Home Network, bssid=80:a1:d7:4a:d0:02, security=WPA Personal, rssi=-76, channel=<CWChannel: 0x7f9fd8c185b0> [channelNumber=1(2GHz), channelWidth={20MHz}], ibss=0], is8021X=0, remember=1
    Sat May  5 09:52:05.781 <airportd[804]> associate: INFO: Checking if admin authorization is required
    Sat May  5 09:52:05.802 <kernel> __ieee80211_newstate: INIT -> SCAN (arg 0x0)
    Sat May  5 09:52:05.802 <kernel> ieee80211_check_scan: active scan, duration 24000, desired mode auto, append
    Sat May  5 09:52:05.802 <kernel> ieee80211_check_scan: check scan cache
    Sat May  5 09:52:05.802 <kernel>  macaddr          bssid         chan  rssi rate flag  wep  essid
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.802 <kernel> 
    Sat May  5 09:52:05.807 <kernel> 
    Sat May  5 09:52:05.807 <kernel> ieee80211_init_node[1132] old_auth 5
    Sat May  5 09:52:05.807 <kernel> __ieee80211_newstate: SCAN -> JOIN (arg 0x0)
    Sat May  5 09:52:05.812 <kernel> __ieee80211_newstate: JOIN -> AUTH (arg 0xc0)
    Sat May  5 09:52:05.813 <kernel> ieee80211_cancel_scan: cancel active scan
    Sat May  5 09:52:05.813 <kernel> scan_next: done, [ticks 32912, dwell min 8 scanend 56413]
    Sat May  5 09:52:05.813 <kernel> parseWPAIE: groupCipherType = 3 pairwiseCipherType = 3 authSel = 2
    Sat May  5 09:52:05.813 <kernel> initWithInterfaceAndIE: _myMacAddress 00:17:f2:e6:81:a1
    Sat May  5 09:52:05.813 <kernel> setPMK: PMK SET!
    Sat May  5 09:52:05.815 <kernel> ieee80211_tx_timeout: state AUTH
    Sat May  5 09:52:05.815 <kernel> [80:a1:d7:4a:d0:02] ieee80211_scan_assoc_fail: reason 1
    Sat May  5 09:52:05.815 <kernel> [80:a1:d7:4a:d0:02] sta_assoc_fail: reason 1
    Sat May  5 09:52:05.815
    Sat May  5 09:52:05.815 <kernel> __ieee80211_newstate: AUTH -> SCAN (arg 0x1)
    Sat May  5 09:52:05.815 <kernel> [80:a1:d7:4a:d0:02] ieee80211_scan_assoc_fail: reason 1
    Sat May  5 09:52:05.816 <kernel> ieee80211_init_node[1132] old_auth 5
    Sat May  5 09:52:05.816 <kernel> ieee80211_check_scan: active scan, duration 24000, desired mode auto, append
    Sat May  5 09:52:05.816 <kernel> ieee80211_check_scan: check scan cache
    Sat May  5 09:52:05.816 <kernel>  macaddr          bssid         chan  rssi rate flag  wep  essid
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> 
    Sat May  5 09:52:05.816 <kernel> ieee80211_start_scan: active scan, duration 24000, desired mode auto, append
    Sat May  5 09:52:05.816 <kernel> scan_next: chan   1g ->   1g [active, dwell min 8 max 8]
    Sat May  5 09:52:05.834 <kernel> ieee80211_cancel_scan: cancel active scan
    Sat May  5 09:52:05.834 <kernel> __ieee80211_newstate: SCAN -> INIT (arg 0xffffffff)
    Sat May  5 09:52:05.834 <kernel> ieee80211_init_node[1132] old_auth 5
    Sat May  5 09:52:05.835 <kernel> en1: Terminating supplicant.
    Sat May  5 09:52:05.835 <kernel> RSNSupplicant: Releasing authenticator for 00:00:00:00:00:00
    Sat May  5 09:52:05.835 <airportd[804]> associate: Apple80211Associate2() failed with error -3905
    Sat May  5 09:52:21.354 <kernel> IO80211ScanManager::cachePurge: clearEntries[0] Firing!
    Sat May  5 09:52:21.354 <kernel> IO80211ScanManager::cachePurge: Rescheduling in 14 seconds.
    Sat May  5 09:52:35.354 <kernel> IO80211ScanManager::cachePurge: clearEntries[0] Firing!
    Sat May  5 09:52:35.354 <kernel> IO80211ScanManager::cachePurge: NOT Rescheduling.
    I'm pretty savy with computers and have dealt with all kinds of stuff before, but this one is beyond me, and is really annoying! I konw my machine is old, but it was totally useable up until these Wifi issues, and now wifi is basically useless.
    From what I've read, it seems like its a driver issue with the Atheros card in my machine, but most people seem to be complaining about dropped connections (mine rarely drops) rather than timeout connection issues. I've also never had the "hardware not found" issue that many people have, so I think this is something different.
    Anyone out there have any advice? I'm getting close to losing it with wifi since the update!

    Sorry - to add:
    I don't think it's a question of WPA vs. WPA2, or even channel number - I have 2 identical routers here and neither work (both default to WPA Ch 11) but I changed one to WPA2, new SSID, various channels and still had the same problems.
    Another thing to note that should be irrelevant, but who knows: the Firewire controller on my machine died back in Fall 2010 - to the point where the system won't start-up unless I remove the IOFirewire***.kext from /System/Library/Extensions , and as soon as I do that, it works flawlessly (minus Firewire). It meant I had a **** of a time installing Lion becuase I can't boot off the Recovery Partition (which has the drivers baked into it), but by cloneing my HD, installing Lion onto the clone via a borrowed machine, removing the .kext's and cloning back, I got it on and everything seems to be fine otherwise... I posted about that problem before, but never got any answers. And it wasn't just me, my father has a late 2007 MBP and the same firewire issue happened to his within 5 days of mine (not a power spike - I think it was shortly after some system update if I remember correctly).

  • My iphone 5 says that it's connected to home wifi but I can't access the internet

    We just got Comcast Xfinity internet installed and I have no idea if that's the problem (or if it's because our wifi does not require a password) but my iPhone 5 (and my boyfriend's) will connect to our home network wifi but when I try to use the internet, it gives me the message that "Safari cannot open the page because the server has stopped responding" or something to that effect. I have tried: 1) Forgetting the network and re connecting 2) Resetting network settings 3) Changing from DHCP to Static and back 4) changing the DNS number and 5) Calling AT&T Support (no luck there, either). The tech person did suggest (as weird as it sounds) that the fact that my wireless router does not have a password might be the problem and that once I password protect it, it could help. No idea.... Please help!

    I figured it out! We have a modem (the new one that was given to us when we signed up with Comcast) and a wireless router. The network names on the two are different, so I called Comcast and they confirmed that the new Comcast modem puts out a wireless signal and that our network is connected to that one, not the old wireless router. So I checked to see if that network was available to connect to on my iPhone and it was! I entered the new password, forgot the old network, and it works!! Thanks for the suggestion to call Comcast!

  • Iphone wifi problem|CHN,SH|131002|

    Hello,Apple.
    My friend bought a iphone5 in USA last December . Yesterday  I can not use Wifi on this phone, The wifi can search the signal，but it can not add in.Only when I am very close to, wifi  can be added in.  I tried every thing for my iphone. so I think it maybe a hardware problem.
    But I am living in Shanghai，China. I can not get a normal warranty in Apple China.
    So can you give me a solution？
    IPHONE 5, WHITE ,16GB
    MD294LL/A
    MODEL A1428
    Serial No.  DNQJTZYLDTTP
    IMEI/MEID 03430002771453
    IOS 6.0.1
    Best regards

    Apple provides service through its own stores, and thorough authorized resellers. If you purchased it from an authorized reseller they are obligated to repair it under warranty, as long as it isn't jailbroken or hacked. If you didn't buy it from an authorized reseller then Apple has no obligation to fix it, but a reputable store would still repair it for you. It sounds like you may have a "grey market" phone. The problem with grey market is there may be no meaningful warranty.

  • I solved my Iphone Wifi Problems

    Since upgrading to 3.0, I had been unable to connect to the internet using my home wifi access point. The interesting part was that I could connect to the wifi network and interact with the other computers in the network, I just couldn't connect to the internet (all other wifi devices in the network could connect to the internet). After trying everything, it occured to me to change the DNS in the iphone to my router's IP address (given that the router already knows the ISP's DNS address). For some reason, this worked. I now have excellent connectivity to the internet, as well as access to all other devices in the network. I hope this works for someone else.
    PS. You need to use static IP configuration for this to work. Also, my wifi is WEP encrypted.

    Hopefully you're on to a possible solution for those with fixed ip addresses, us lesser mortals will have to sit tight and wait for the guys with the "it just works" slogan to pull there fingers out and rectify the 3.0 firmware upgrade that's killed everyones wifi.
    Why is it not one wifi issue on the forum has had a genuine Apple reply?
    I'm disgusted at their lack of acknowledgment of the problem they've created!
    I might buy another mobile with Windows on it, actually things aren't that bad just yet but close.

  • APPLE MANAGEMENT 3.1.X         WIFI problem only fixed by newer ROUTER

    I just had a MANAGEMENT IN support tech. tell me the only way to fix issues with WIFI once you update to newer OS is to get NEW ROUTER because it won't work with older technology routers.

    It is pretty well known here that 3.x OS requires newer routers or at least router running updated firmware. I personally don't find this to be a problem nor have I found a public router that I couldn't connect to.
    I recently had a router problem, not a wireless issue, and it would not connect to my cable modem. Guess what? Router firmware update and everything was fixed.

Maybe you are looking for