IPhone 5 will not turn on, when plugged in apple logo flashes continuously

My iPhone 5 mysteriously turned off with about 30% left, it will not turn on at all no matter how long I hold the buttons. Also when plugged in the apple logo turns on but than turns off after acouple seconds, it will repeatedly do this until unplugged.

Hello rthand,
Welcome to Apple Support Communities.
The following article provides troubleshooting steps for the symptoms you are describing.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Regards,
Jeff D.

Similar Messages

  • HT200150 I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.

    I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.

    Connect your phone to itunes on the computer you use itunes on and open up itunes.

  • My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

    My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • My iphone will not turn on we plugged it into the charger in the wall,the charger in the computer,pc...what do i do?

    What do i do my iphone will NOT turn on it is like stuck its fine it hasnt been dropped kicked or thrown or hurt in any way its just i plug it into the wall in the charger it will not turn on its a black screen and also i hold the ON Button and its still not working I tryed plugging it into the Computer and still Nothing...What do i do?!?

    What do i do my iphone will NOT turn on it is like stuck its fine it hasnt been dropped kicked or thrown or hurt in any way its just i plug it into the wall in the charger it will not turn on its a black screen and also i hold the ON Button and its still not working I tryed plugging it into the Computer and still Nothing...What do i do?!?

  • My phone will not turn on just has the apple logo on it what can i do ?

    My phone will not turn off or on just has the apple logo on it

    Click here and follow the instructions.
    (126112)

  • My iphone will not power on - when plugged in the battery will display, but it does not charge

    My iphone ran out of battery a few days ago, and now it will not charge back up. Its been plugged in for over a day, when the home button is pressed it displays a battery with 3 small red bars. I was able to get it into recovery mode and restore factory settings - but this did not solve the problem! it is still not turning on. I have tried changing chargers etc. already and i believe it is a problem with the phone. please help!

    Could be a battery problem. You'll have to visit an Authorized Apple Service Provider to Apple Store to get it checked for hardware issues.
    iPhone - Contact Support - Apple Support

  • Iphone will not turn on unless plugged into outlet, and then says activation needed

    It worked fine before class, when I left class to check my phone, it wouln't turn on. If I plug it into the wall outlet and it shows the red battery indicating it has no charge, then goes to the apple logo screen for a few minutes before turning on and saying activation required. It was trying to make me go through the steps of activating it. If i unplug it, it will turn back off. It will not power up if I plug it into the computer, and it does not show up as a device on my computer. I have tried holding down the home and power button to reset it, and this does not work. I bought the phone when it first came out, Im trying to avoid taking it the the Apple store because it is 2 hours away.

    What troubleshooting have you tried? Try a reset, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. If it does not, then you need to try and restore via iTunes. Try connecting the phone to the computer and iTunes and see if it is recognized. If not, you will have to force it into Recovery mode and restore. See this support document for that help. http://support.apple.com/kb/HT1808

  • My ipod touch will not turn on when plugged in or when I press the power button. I need to send it in for reapir, but I need the serial number. Any round about solutions?

    The back of the Ipod is warn so I can't see the serial number, so please let me know if you know anything that would help.

    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    To find SN:
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • TS1538 iphone 4 isnt recognized by windows 7 or itunes, even in recovery. but iphone will go into recovery. iphone will not turn on, stuck at apple logo-in a loop-

    i am new to iphones and was chosen to "fix" friends iphone, have managed to get iphone into recovery mode but itunes and windows 7 wont recognize it at all. ive tried everything, googled all i can google...with no luck. iphone will not boot up just goes to apple logo and loops nonstop even when charging. please someone tell me what to do as i am an android geek and know nothing of iphone.

    Hello,
    this Solution fixed my Problem.
    http://www.reddit.com/r/jailbreak/comments/1v6zkz/how_to_fix_boot_loop_without_l osing_data_stuck_on/
    I restored my iphone to ne newest iOS7.1.1 without losing my preferences, passcode, photos, music, pdf, ibooks, apps and app data and so on. After Restoring i saved the app data and photos with the tool itools.
    I think its a good solution for people, which not backup there data with itunes and icloud.

  • My iphone will not work unless i plug it into my wall charger. but it is fully charged! When I turn it on (only turns on while plugged into wall) it says it needs to be My iphone will not work unless i plug it into my wall charger. but it is fully charged

    My iPhone will not work unless I plug it into my wall charger, It is fully charged but only works when it is plugged in to wall charger. When it is turned on it say "Restore needed iphone can not make or receive calls' i tried plugging it up to Itunes but it will not turn on to sync.

    First try a hard reset, press and hold the power button and home buttons until the phone restarts and displays the Apple Logo, then let go.
    If that doesn't work...
    Try forcing recovery mode and then restore with iTunes.
    HT1808 iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808

  • My iPhone will not charge and will only turn on when plugged into adapter.

    I have tried to reset and nothing. It turns off if I unplug it and will only turn on when plugged in. The charge has not moved above 19% even though I let it charge for 3 hours while I was out. What do I do?

    http://support.apple.com/kb/TS2802

  • My iphone is fully charged but it will not turn on unless plugged into a charger

    my iphone is fully charged but it will not turn on unless plugged into the charger in the wall, it wont even turn on when connected to the computer!!!!!!!

    Hi there. Any luck with your phone? I'm having the same problem

  • Help, my iPhone will not turn on what appears is the iTunes icon and an image of the plug and wire

    My iPhone will not turn on, all that appears is the iTunes icon and the image of the plug and wire, please help

    The device is in recovery mode. See this support document for instructions on how to handle that.
    If you can't update or restore your iOS device

  • My ipad will not turn on when I plug it up, the screen light will occasionally blink

    my ipad will not turn on when I plug it up, the screen light will occasionally blink, thank you

    First, make sure that it's fully charged.
    Then, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My iphone will not turn on at all even when i do a hard restart. how can i fix this?

    My iphone will not turn on at all. i tried to hard reboot it and still nothing what can i do to fix this?

    Take it to your local Apple Store and have the genius take a look. If it won't respond at all, it sounds like a hardware failure.

Maybe you are looking for

  • Getting Java 1.4.2_10 to work along side of 1.5.0_06 in IE

    I'm trying to use IBM's Tivoli Enterprise Portal through IE but it only will take java 1.4.2_10 which shouldn't be a problem except I have clients that also need version 1.5.0_06. I've tried a lot of different settings in IE and in the two different

  • Delete messages from PI so that the same message ID can be sent to PI sever

    Hi Experts, for the automation of tsting on PI it would be great, if I could send messages with the same message IDs several times to PI. I know, a message ID that allready exists cannot be send again. Therefore I am looking for a way to delete messg

  • History of signing a document

    To whom it may concern, I have a question in using e-signature feature in Adobe Acrobat Professional XI. How can I configure an authoritative time to display in the history of signing a document. Best Regards, Wipaporn Ch. DISCLAIMER: This message an

  • Photosmart 8450 error print and photo light

    Hi, my printer had been working fine but suddenly just stopped and shows a red light around the big 'print' button and a green light next to 'photo' under the 'paper tray' bit on teh display.  It doesn't turn on or off, the ink cartridges don't move

  • Jdbc to proxy error while testing communication channel in rwb

    Hi experts, my scenario is JDBC to Proxy... while testing in communication channel i got the following error. 26.02.2014 12:29:44.378 Error SOAP: Call failed: com.sap.aii.af.sdk.xi.srt.BubbleException: HTTP Response Received. Status Code = 500 [null