Iphone 5 with iOS 8 not going into Sleep Awake

SInce updating my iPhone 5 to iOS 8 it will not go into Sleep Awake. Phone will continuously stay on. When phone is asleep and is woken from iMessage/Notification/Phone call it will not go back to sleep. There is no option so set a sleep time anymore in iOS 8. Please fix!

My Son pointed out to me that my Auto-Lock in the General setting had been reset to Never. Problem fixed. I have noticed that some settings have been rest even after being restored from a previous back up.
Settings>General>Auto-lock

Similar Messages

  • Continuously goes into sleep mode

    my computer worked perfectly fine until the day in literally blew up from the logic board b.s. ... so i got it replaced probably like back in febuary and have nothing but problems since and when i bring in to apple they cant do jack about it.
    my fans run excessivly and the computer will start to go into sleep mode after being on for maybe 30 mins and then just keep doing it right when i start it back up. has anyone else had this problem?!?!?!

    I too am having the same problem with my G5 going into sleep mode, although I must be lucky because I get about ah hour out of it before it shuts down. The problem appeared after replacing a logic board with blown capacitors at an approved service center. Since then they have also replaced the power supply and it is in shop now getting it's third logic board?!*@#! I do have to admit though that apple has coverd the cost of all repairs so far in spite of expired warranty.
    All those MAC commercials are driving me crazy... "Hi, I'm a mac. Hi, I'm a PC. Neither of us work, but at least it's fairly easy to fix a PC."
    Is there a point dealing with apple through phone directly or is going through a service center just as good?
    iMac   Mac OS X (10.3.7)  

  • Hi Guys 'n' Gals! I have a problem with my computer going into 'Display Sleep' mode and it actually goes into full sleep mode. anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never go into computer sleep

    Hi Guys 'n' Gals!
    I have a problem with my computer not going into 'Display Sleep' mode but actually goes into full Computer Sleep mode. Anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never' go into 'Computer Sleep' within the 'energy saving' section!
    Any ideas guys?
    Miffa!

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the  appropriate method.

  • IPhone 3gs wont turn back on once it goes into sleep mode!

    2 days ago my iPhone 3gs (OS 6.0.1) has gone completely wacko on me and i'm completely frustrated!   I have my phone set to have the screen shut off after 5 minutes.  Usually, to just reaccess the phone I just simply hit the home button.  Now, if I let it go into sleep mode, the phone WILL NOT come back on!  I went online and did some research, and it suggested holding the home button and the sleep button for 10 seconds to get it to come back on.  It works most times, but sometimes it takes a few tries to get it to come back on, and when it does come back on it takes forever to load up.  But the whole thing happens all over again when it goes into sleep mode.  My phone is fine as long as I set it to never go into sleep mode, but it is killing my battery.  I need to be able to put it into sleep mode as I have to be able to go all day without charging it at my job.  PLEASE help...I don't know what's going on with it.  I have never done anything to it (jailbreaking, illegal stuff, etc.) and I do all the updates that it asks to do.
    Please please help!
    Jennifer.

    If you actually see a "6" error code, here's what it means.  Disable your anti-virus and/or firewall.
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • My computer has been acting weird lately.  Shuts itself off, the mouse goes off in all angles, does not go into sleep mode sometimes and instead shows on a gray screen definitions of words in 3" letters!  Do I have a virus?

    My computer has been acting weird lately. Shuts itself off, the mouse goes off in all directions, does not go into sleep mode sometimes, instead shows a gray screen with word definitions in large 3" letters that continuosly flows across the screen.  Do I have a virus?

    Doesn't really sound like a virus.
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    How many of these you can answer...
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

  • Late 2012 Mac mini with OSX 10.8.2 has started shutting down instead of going into sleep mode.

    Sometime in the last week or so my mac mini has started going into full shut down instead of sleep mode.
    I have tried checking and unchecking energy saver boxes but haven't found anything which will get me back to where I used to be - and I haven't knowingly changed anything to make this happen.- maybe an OS update caused it?
    The machine will fire up with a tablet click rather than needing the reset button to be pushed so clearly the machine is sort of halfway between sleep and full 'off'. Most frustrating as one of the key issues for me in getting this my first mac was its easy sleep and super quick fire up compared to windows.
    Any help appreciated
    Oh yes  I just remembered that I did just install 2 8gb of crucial RAM (to replace the supplied 2 2gb but surely that can't have anything to do with it - can it)?

    Adding to my first post I can now advise that when the mac goes into sleep mode the light on the front stays on (it does not pulse so clearly it is not really sleeping).
    When i click the tablet / keyboard this is actually what triggers the mac to reboot
    I have tried resetting the SMC as per the following link to no avail
    http://macs.about.com/od/usingyourmac/qt/Resetting-The-Smc-System-Management-Con troller-On-Your-Mac.htm
    Help please!

  • Monitor goes into sleep mode and will not wake up

    My monitor goes to sleep and will not wake up.  I try powering off and that will not respond.  I have to unplug the workstation and start back up.  I have turn off sleep to never sleep and now it just goes to sleep when Im working. 

    Hello @rosendahl14,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
    To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
    Step 1. Unplug the power cord from the back of the monitor and the wall
    Step 2. Hold the power button down for at least one minute
    Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the Factory Reset option and select it
    Step 6. Try a different cable connecting your monitor to your computer
    If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
    Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command Prompt
    Step 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter 
    reference: http://superuser.com/questions/669571/windows-8-1-​64-bit-power-schemes-gone
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • W510 does not wake up when it goes into Sleep mode - Windows 7 Bit

    Hi All,
    The Lenovo thinkpad w510 does not want to wake up once it goes into sleep mode, I have to push the power button until it shuts down completely and then reboot it completely, I have tried different settings in the power management etc. We have the same pissue on 3 different w510`s with Windows 7 pro 64 Bit
    Has anybody got a solution for this problem?
    Regards,
    Solved!
    Go to Solution.

    Hi russellwth,
    Welcome To Lenovo Forums.
    This issue has been solved with the latest BIOS for the W510. 
    Please check our Knowledge Base Article regarding this issue.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hello, so today I realized that my iPhone with iOS 6 is frozen on the music. I can get back to the home screen but I can't get the music player to work because its frozen on the w's and will not respond to touch. I would be grateful for any help on this.

    Hi deamayfield,
    Thanks for visiting Apple Support Communities.
    If your Music app is unresponsive, try restarting/resetting your iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Best,
    Jeremy

  • I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone becaus the backup was corrupt or not compatible with the iPhone"

    I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone"

    Assuming you are using the current version of iTunes (11,2,2), open iTunes, click "Preferences" under the leftmost entry on iTunes' menu, then choose "Devices".
    Find the iPhone's backup there, highlight it, and choose "Delete Backup".

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

  • Since updating my iphone with Ios, I am being asked for a 'passcode', it will not accept the one I have?

    Since updating my iphone with iOS this morning, I am being asked for a 'passcode', it will not accept the no I have entered, I do not know who to contact?

    Will it not open without a passcode?
    Trr using your Apple ID password.
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
     Cheers, Tom

  • Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?

    Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?

    Are you sure you have a 3GS and not a 3G?  The 3G cannot be updated to iOS5.  What version are you on now?... Settings > General > About > Version

  • HT1414 i can't complete the iphone with ios 6 my car is not valid and what should i do ?

    i can't complete the iphone with ios 6 my car is not valid and what should i do ?

    Try rephrasing your question.
    What does your card have to do with it and how do you complete a phone with ios 6?
    What exactly are you doing, and what is the exact message you're getting?

  • PXI-8431 not going into receive mode with VB6

    I am using a PXI-1045 chassis with a PXI-8431 RS422/485 card and communicating via a VB6 program
    The output of the PXI-8431 RS485 module works OK when it is in send mode, the signal levels are approx 1v and 3v for high and low, but when it is in receive mode the outputs remain at 1v and 3v instead of going into passive mode and both lines floating at approx 2v with approx 300mV differential as they should. This means when the remote devices send, the amplitude of the signal is approx half as they are competing with the PXI module, and that the centre point of the two signals are at 1v and 3v respectively. Our software does not receive the signals from the PXI module which is consistent with my theory that it is still in send mode and taking control of the lines, or maybe it has changed it to 4 wire mode.
    I have swapped over the PXI card and the remote cards with our good system and the problem does not move.
    I have eliminated ALL the hardware on the new ring by replacing it with a 67 Ohm resistor on the pins of a 9 way D connector plugged onto the PXI card directly. With a scope I can see that the new system is not going into passive mode, but with the same connector the old system works OK.
    The only difference I can see between the 6 old rigs we have that do work and the 2 new ones that do not work is the new ones use the the NI-XNET-PXI-8513 and the old ones use the PXI_8464 CAN card. Could this software be conflicting? Is there any other updates to the NI software that could be causing it?
    Solved!
    Go to Solution.

    Hi,
    I've had a check to see if we have any known software conflict issues with those cards but it all seems fine, it could be that the Windows Driver layer is causing some issues. If you nip into Device Manager and go to the properties of the 8431 you should be able to change it to 2-wire mode from those settings then re-run the program.
    Also does the program throw any errors at all in terms of device resources when trying to move from send to receive mode?
    What versions of NI-VISA and NI-Serial do you currently have installed?
    Kind Regards,
    Applications Engineer

Maybe you are looking for