IPhone 5 works fine with incoming calls and audio books but no one can hear me talk.
I have an add-on blue tooth system in my older Prius and it worked perfectly for a couple of years. I can still receive phone calls and listen to audio books through my radio speakers but all of a sudden my callers could no longer hear my voice so I have to switch the phone audio source to iPhone so they can hear me. This happened when I had the iPhone 4 and has continued with the iPhone 5. Any suggestions on how to fix this?
Hi, Did you test to see if after 2 or 3 mins the phone started working correctly? mine does then it will work for a day or 2 on every call then I have to do the same thing again.
Similar Messages
-
Please help...can dial out & answer calls, but no one can hear me...tried network reset...anything else?
Or you can call 1-800-My-Apple
Sounds like there's a hardware problem with your Mic and you need to get it repaired which can be done either at the store (which is going to get super busy very soon) or you can call into tech support for them to set up the repair for you -
I am trying to watch Prof. Susskind's lectures from Stanford Univ. U-tube lectures work fine.With I-tunes, there is a synchronization problem between audio and video. Is there a way to fix this or the people who uploaded messed up and it is too late?
I had thought this situation was solved but it just got worse. In addition to being without service for several days I am now being charged a cancellation fee for a broadband service that BT disconnected in error. BT Vision was also terminated by BT but the set up charges are still in place. Does anyone know who the relevant Ombudsman is? I called BT from America on Friday - for an hour - while someone called Aruj sorted out why there is an order 'in progress' that I didn't initiate; why I have fees relating to a problem created by BT and why there are references to a house move that didn't take place and a BT Vision service I no longer have but didn't cancel myself. He assured me it would be rectified and my bill would be reduced by 139 pounds and we would get confirmation of this later that day. I asked him what chance there was that this would not actually happen - he said no chance at all; my new bill would be 23.50.
There was no text message. An online chat person today told me there had been a fee reduction request which had been declined and there was nothing else he could help me with as he dealt only with broadband. But he would get BT Vision to email me. They always seem so helpful.............
I'm sure I'm listed somewhere as 'a problem', there's no other explanation for why I get the runaround -
TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.
Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.
Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.
-
macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before
If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton -
My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1
I have tried everything, even buy new external disk from different manufacture.
If I cant get a fix soon, I am downgrading back to SnowL.Still no luck. I tried all the tricks, reconfiguring TM (remove selected disk option, and re-setting it, and trying different disks). Tried new combo updater, and the newer TM update after that. Tired two different disks too (one is my older firewire WD MyBook 1TB, and my brand new 3tb Seagate GoFlex USB... either one plugged into back of computer - no intermediary devices). I did get the TM buddy wiget and it produced the following log, from the last attempt, where I setup lots of exclusions so that backup quantity was small (under 10gb). Still it failed to complete. Here is that log, for what it is worth:
Starting standard backup
Backing up to: /Volumes/TM-Disk/Backups.backupdb
9.56 GB required (including padding), 911.15 GB available
Waiting for index to be ready (101)
Copied 0 files (0 bytes) from volume Mac HD.
Backup canceled.
To prove a point, I will take these disks are run them on my other Tiger and Snow Leopard laptops to prove TM works fine on those with these disks. But I fear the only options are to either have my tech re-install LION... or just have him reinstall SL instead. Im at wits end. -
I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to the store
Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone. Then you can look into Applications > Utilities > Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
then go through the process of looking for the microphone again as the reset may reenable the mic. -
used "find my iphone app" and now that I have found my iphone, no one can hear me talk? how do I let Apple know I have found my Iphone so I can use my Iphone?
so frustrated.Well its defintiely nothing that Apple can activate to fix this. They would be able to troubleshoot with you though. This may be able to be resolved if its something software related.
You can chat into Apple by visiting https://getsupport.apple.com -
Please help me!
I have a copy of PS CS6 which I purchased from Adobe but I don't have the activation code!!
I cannot get anyone to help!
I have made several calls and online chats, but no one seems to get it.Thank you for replying. Yes I deleted the old email address..
-
What do you do when you can receive a call, but no one can hear you?
What do you do when you can receive a call, but no one can hear you?
From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
Just had the upgrade to IOS 7.1 and now with an incoming call, the associated picture is just a thumbnail, instead of filling the screen. Anyone know how to change this? I tried specifically associating a picture on my phone with a contact and trying it, but still was a thumbnail.
This change that Apple made is disconcerting. It shows that whomever is now in-charge of these decisions at Apple doesn't have what it takes. There's something seriously missing with this decision and the change to less usability is incredibly misguided. Who wants their contacts to appear in a little cartoon-like round bubble and the incoming caller can't easily be recognized?? As someone who has used a Mac since 1984, there's something seriously wrong with their design guidance. Apple likes to create products that "delight" and this doesn't.
-
IPhone 5 vibrates with incoming call, message, and email but there is no ring tones.
Recently had to replace my IPhone. Repaced the SIM card and backed up on ITunes. Everything works fine but I get no ring or sounds when receiving calls, messages, and emails, etc. Phone does vibrate. Speaker is working with music. Volume is turned on in settings.
Check the mute switch near the external volume controls. If orange is showing it is muted.
-
How can I get iTunes running on a Windows XP machine as well as, separately on a newer laptop running Windows 7 to both recognize and sync with my new iPhone 4S? I have different libraries on each machine which I need to sync with the iPhone, both in iTunes. It seems to be workiing fine on the Windows 7 machine, but not even reconizing the device at all in iTunes on Windows XP.
Thank you for your assistance.Hi turingtest2 - thanks for the reply. As you say It is how it is - and I have three workstations in this home (not counting three for my children and one for the family) and I pretty much always have more than one OS on each - that's how it is for me. I shouldn't have to worry about how many OSs I have (or how often I change them) just to have music while I'm working - through the PC sound system that is. I never have to worry about any other software, only iTunes. Once in a while (in the past) I've made a vendor call if I changed to many things to often (like CPU, GPU, memory, etc - or even a replacement MB) - but that hasn't happened in a couple years (at least since Vista) so I think (hope) they have fixed that for good. And even then it was a quick call and problem resolved. The only (glaring) constant problem is iTunes - limiting my own use of my own music (by counting an OS as a physical PC). Even with VM (which is just another OS) - although you can Attach things to multiple active OSs - it's still your own (purchased) music - and all on one PC. Thanks again!
-
Fast busy signal with incoming calls and unable to connect to voice mail
We are using CISCO 2821. The system started to have problem connecting to voice mailbox (when dialing internally to the VM extension) and it used to take a reboot to bring it back. Now it will not connect to voice mail (gets fast busy signal), plus incoming calls get a fast busy signal after the first ring tone. To make it worse, the Call Manager Express web page does not load. Does anyone have any idea how to solve the problem? Thanks!
Called ATT...they verified the problem and said it was an intermittent signal problem....
only issue is I have to keep the phone off to make sure I received voicemails....
Definitely NOT an iPhone problem, but an ATT problem. -
Working fine with JAVA code and Error Occured while using in JSP
Hi.....
When initiating a BPEL process from JAVA the code is working fine and the Process is getting initiated.But while using that code in J2EE project as a java code and while calling that method Error is occuring.....
Here by i am attaching my JAVA Code which runs as an applicateion and package which runs in Server....
JAVA Code (Run as Application) Working Fine:
package bo;
import com.oracle.bpel.client.Locator;
import com.oracle.bpel.client.NormalizedMessage;
import com.oracle.bpel.client.delivery.IDeliveryService;
import java.util.Map;
import java.util.Properties;
import oracle.xml.parser.v2.XMLElement;
/*import javax.servlet.RequestDispatcher;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest ;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession; */
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
public class processit {
public static void main(String args[]){
String input = "TATA";
String xmlInput= "<ns1:AccessDBBPELProcessRequest xmlns:ns1=\"http://xmlns.oracle.com/AccessDBBPEL\"><ns1:input>"+input+"</ns1:input></ns1:AccessDBBPELProcessRequest>";
String xml="<ns1:BPELProcess1ProcessRequest xmlns:ns1=\"http://xmlns.oracle.com/BPELProcess1\">";
xml=xml+"<ns1:input>"+input+"</ns1:input>";
xml=xml+"</ns1:BPELProcess1ProcessRequest>";
try{
Properties props=new Properties();
props.setProperty("orabpel.platform","ias_10g");
props.setProperty("java.naming.factory.initial","com.evermind.server.rmi.RMIInitialContextFactory");
props.setProperty("java.naming.provider.url","opmn:ormi://157.227.132.226:6003:home/orabpel");
props.setProperty("java.naming.security.principal","oc4jadmin");
props.setProperty("java.naming.security.credentials","oc4jadmin");
props.setProperty("dedicated.rmicontext", "true");
Locator locator = new Locator("default", "bpel", props);
System.out.println("After creating the locator object......");
IDeliveryService deliveryService =(IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME);
System.out.println("Before creating the NormalizedMessage object......");
NormalizedMessage nm = new NormalizedMessage();
System.out.println("After creating the NormalizedMessage object.*.*.*...");
nm.addPart("payload", xml);
System.out.println("Before creating response object......");
NormalizedMessage res = deliveryService.request("BPELProcess1", "process", nm);
System.out.println("After calling the BPELProcess1 .*.*.*...");
Map payload = res.getPayload();
System.out.println("BPEL called");
XMLElement xmlEl=(oracle.xml.parser.v2.XMLElement)payload.get("payload");
String replyText=xmlEl.getText();
System.out.println("Reply from BPEL Process>>>>>>>>>>>>> "+replyText);
catch (Exception e) {
System.out.println("Exception : "+e);
e.printStackTrace();
JSP and Java Method Used:
JSP Code:
===============
<%@ page import=" bo.callbpel" %>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>FEATT - I30</title>
</head>
<body>
<%
String input=request.getParameter("dnvalue");
callbpel p=new callbpel();
String Output=p.Initiate(input);
out.print("The Input Given to the BPEL Process is : "+input);
%>
<BR><BR><BR><BR><BR><BR>
<%
out.print("The Reply from BPEL Process is : "+Output);
%>
</body>
</html>
Java Code:
package bo;
import com.oracle.bpel.client.Locator;
import com.oracle.bpel.client.NormalizedMessage;
import com.oracle.bpel.client.delivery.IDeliveryService;
import java.util.Map;
import java.util.Properties;
import oracle.xml.parser.v2.XMLElement;
/*import javax.servlet.RequestDispatcher;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest ;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession; */
//import java.util.*;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
public class callbpel {
public String Initiate(String value){
String replyText=null;
String input = value;
System.out.println(input);
String xmlInput= "<ns1:AccessDBBPELProcessRequest xmlns:ns1=\"http://xmlns.oracle.com/AccessDBBPEL\"><ns1:input>"+input+"</ns1:input></ns1:AccessDBBPELProcessRequest>";
String xml="<ns1:BPELProcess1ProcessRequest xmlns:ns1=\"http://xmlns.oracle.com/BPELProcess1\">";
xml=xml+"<ns1:input>"+input+"</ns1:input>";
xml=xml+"</ns1:BPELProcess1ProcessRequest>";
try{
Properties props=new Properties();
props.setProperty("orabpel.platform","ias_10g");
props.setProperty("java.naming.factory.initial","com.evermind.server.rmi.RMIInitialContextFactory");
props.setProperty("java.naming.provider.url","opmn:ormi://157.227.132.226:6003:home/orabpel");
props.setProperty("java.naming.security.principal","oc4jadmin");
props.setProperty("java.naming.security.credentials","oc4jadmin");
props.setProperty("dedicated.rmicontext", "true");
Locator locator = new Locator("default", "bpel", props);
String uniqueBpelId = com.collaxa.cube.util.GUIDGenerator.generateGUID();
//System.out.println(uniqueBpelId);
//java.util.Map msgProps = new HashMap();
System.out.println("After creating the locator object......");
IDeliveryService deliveryService =(IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME);
System.out.println("Before creating the NormalizedMessage object......");
NormalizedMessage nm = new NormalizedMessage();
System.out.println("After creating the NormalizedMessage object.*.*.*...");
//msgProps.put("conversationId",uniqueBpelId);
//nm.setProperty("conversationId",uniqueBpelId);
nm.addPart("payload", xml);
System.out.println("Before creating response object......");
NormalizedMessage res = deliveryService.request("BPELProcess1", "process", nm);
System.out.println("After calling the BPELProcess1 .*.*.*...");
Map payload = res.getPayload();
System.out.println("BPEL called");
XMLElement xmlEl=(oracle.xml.parser.v2.XMLElement)payload.get("payload");
replyText=xmlEl.getText();
System.out.println("Reply from BPEL Process>>>>>>>>>>>>> "+replyText);
catch (Exception e) {
System.out.println("Exception : "+e);
e.printStackTrace();
return replyText;
While Creating and Object for the Class callbpel and Whilw Calling that Method
callbpel p=new callbpel();
String Output=p.Initiate(input);
Its throwing an Error:
Error Occured is:
After creating the locator object......
Before creating the NormalizedMessage object......
After creating the NormalizedMessage object.*.*.*...
Before creating response object......
Apr 24, 2008 9:12:00 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.NoClassDefFoundError: javax/ejb/EJBException
at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:76)
at com.oracle.bpel.client.delivery.DeliveryService.getDeliveryBean(DeliveryService.java:254)
at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:83)
at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:53)
at bo.callbpel.Initiate(callbpel.java:55)
at org.apache.jsp.output_jsp._jspService(output_jsp.java:55)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:331)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:874)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
at java.lang.Thread.run(Unknown Source)
For Running JSP i am Using Eclipse 3.2.0 and apache-tomcat-5.5.25
Please Provide me a Solution......
Thanks in Advance.....
Regards,
Suresh KA JSP is not the same as a Java application. A Java application has package statment, import statements, try/catch block, a JSP doesn't.
Maybe you are looking for
-
Difference between transient & volatile
1.what is the difference between Package & Import statement in java? 2.what is transient?what is the utility of it?when it is used? 3.what is volatile?what is the utility of it?when it is used? 4.what is the difference between String mystring="SUNJAV
-
Preserve aspect ratio of JPanel size within JApplet
Hi, currently, I have a JPanel component, which will be placed at the center of JApplet (This JApplet is BorderLayout). I wish to preserve the aspect ratio of the JPanel to square (width equal to height) even when the JApplet size is changed. I overr
-
Display flash elements based on Coldfusion Query
I would like to have my page display certain flash elements that are dictated by the html content on the main part of the page. The main content would come from a query that contains primary keys. Now, the question is, can I get flash to display the
-
hi i have been asked to do bdc recording for the transaction mek1 through the call transaction method.can u people plss tell me how to go abt it?
-
Iweb problem? Corrupt domain? .mac problem?
I have had an iweb08 site for about 6 months now with no problems. All of the sudden today it is all jacked up. Everything looks fine within iweb, but when I go to the actual site, all of the blog posts are missing, pictures are missing, it asks me f