IPhone 5c does not fit in 5/5s in Apple Store docks
iPhone 5c does not fit in 5/5s in Apple Store docks, it is too fat.
Does this mean there has to be an entire new class of docks just for this model?
Peter
So you base this on being at a completely different store the next week after the launch?
Sorry I'm not buying that.
Whilst my wife stood obediently in line I went to the front to observe just how few people were inside and observe the staff. I also spoke to those "managing" the line who deliberately kept things vague when I had already accertained what Apple was and was not offering by just talking to people coming out of the store.
I also spoke to the cameraman and photographer Apple had engaged to "document" the "massive demand" for the new phones, to check they weren't from real news services.
Yes it may be cynical but it is marketing and if you don't believe you are being manipulated either by Apple or those fiddling with "social media" you are ripe for the taking.
I just wish Apple employed less people in marketing and more developing and refining products so they don't ship with annoying flaws. Not like they are either producing lots of new products let alone products that are actually ground breaking or that different lately. These were just tweaks, one to an inconsistent connector, with no other significant change than material and color.
Similar Messages
-
Hi I need ur help actually my iPhone 5 is not working properly I been to apple store they said u have to booked online for repair but I couldn't find where to register plz help out thx ali
Dollersheikh wrote:
... I been to apple store ...
Go to that Apple Retail Stores website and click on Make a Reservation...
Here's an example...
http://www.apple.com/retail/crossgates/
Store List here > http://www.apple.com/retail/storelist/ -
If anyone has any advice or information I would be very grateful. It appears that the Sim "holder" is too small for my Sim card used in the IPhone 3.
You should get a new micro-SIM from T-Mobile. It is possible to cut down a standard SIM, but often that leads to erratic behavior or destruction of the SIM.
Regards. -
I replaced both of my iPhone 4S/7.x with iPhone 5S/7.x and neither was qable to connect to any WiFi unless I was within 20' of the WiFi router. So I took both to the Apple store and they replaced both iPhone 5S.
Now one works perfectly, however the other does not. I went to the Apple store again, and they replaced the replacement iPhone 5S with another 5S. Same problem.
I went back to the Apple store again and they replaced replacement #2 with another replacement, so this is the 3rd time! They recommended I take the replacement iPhone 5S and not restore,but start as a new iPhone. Before I did anything, I checked to see if the WiFi worked "out of the box"....it did not!! Thus, there wasn't any reason to do a new install, since it did not appear to be my software load.
By the way, all 3 of my MacBook Pro's and iPad work perfectly over WiFi.
Also, all my iPhones and iPad are on v 7.04
It doesn't appear to make sense to go back to the Apple store Genius Bar, as it appears all of their stock have this issue.
Any helpful suggestions would be appreciatedI replaced both of my iPhone 4S/7.x with iPhone 5S/7.x and neither was qable to connect to any WiFi unless I was within 20' of the WiFi router. So I took both to the Apple store and they replaced both iPhone 5S.
Now one works perfectly, however the other does not. I went to the Apple store again, and they replaced the replacement iPhone 5S with another 5S. Same problem.
I went back to the Apple store again and they replaced replacement #2 with another replacement, so this is the 3rd time! They recommended I take the replacement iPhone 5S and not restore,but start as a new iPhone. Before I did anything, I checked to see if the WiFi worked "out of the box"....it did not!! Thus, there wasn't any reason to do a new install, since it did not appear to be my software load.
By the way, all 3 of my MacBook Pro's and iPad work perfectly over WiFi.
Also, all my iPhones and iPad are on v 7.04
It doesn't appear to make sense to go back to the Apple store Genius Bar, as it appears all of their stock have this issue.
Any helpful suggestions would be appreciated -
Hi, my iphone 5 charger does not fit in the hole iphone .. it seems as if something inside the iphone had moved because I see that the charger works perfect in another iphone 5
Clean the lint or grit out of it with canned air or a toothpick.
-
Movie does not fit preview window
Sorry if this is a dumb question, but I cannot figure it out.
I made a short movie clip with my iPhone 5. Imported it into iMovie (it looks perfect when I preview it from the event library) and then dragged that clip to a new project. Then when I play the video from within the project, it has been heavily cropped, ie the movie does not fit in the preview window.
I have tried changing the aspect ratio of the project and this made no difference. I also change the setting File > Project Properties > Initial Video Placement to Fit in Frame.
Any help appreciated.A lot of people who shoot video on the iPhone will hold the phone vertically oriented (portrait orientation). For shooting movies, you will get the best results when you rotate the phone 90 degrees to landscape orientation.
iMovie will always edit in landscape orientation (long side on top and bottom, short side on the sides) because this is the way TV screens work. -
"BP Category 1 does not fit the data in category 2" "Replies Appreciated"
Hi Gurus,
When i am trying to create an "Individual Account" in UI, I am getting the error "BP Category 1 does not fit the data in category 2".
If i try to create a "group" then it says "BP Category 3 does not fit the data in category 2".
It allows me to create only "Corporate Account" i..e. Category 2.
What should i do to create "Individual Account" and "Group". (Category1 & Category 3).
Individual Account (Category 1) - "BP Category 1 does not fit the data in category 2".
Corporate Account (Category 2) - Able to create only Corporate Account
Group (Category 3) - "BP Category 3 does not fit the data in category 2".
Thanks & Regards
RohanHi Rohan,
Hope this SAP Note : 1232459, Solves your problem.
You might have created a custom configuration for corporate accounts.
Unfortunately in case of custom configurations exist, they are selected with higher priority.
So in this case the configuration for corporate accounts is also shown for individual accounts,
this causes error.
In order to solve this problem, create a custom configuration for individual account also,
i.e for view BP_HEAD/AccountDetails. Object type BP_ACCOUNT and object subtype INDIVIDUAL.
Please make sure that the custom configuration includes the fields firstname and lastname for
persons instead of name1 and name2 which are only allowed for corporate accounts.
I hope the above information resolves your problem.
Best Regards
Shiven -
CRM 2007 IC : error "BP category 2 does not fit the data in category 1"
Hi Guys,
When I am trying to save the data on the Bupacreate page it gives the error as follows.
"BP category 2 does not fit the data in category 1".
Can anyone suggest what is causing this error to happen and how this error can be corrected.
thanks & regards
SandyHi,
This error usually occrus when you try to set field in without specifing bptype ie person, group etc. In our scenario we were trying to set field in Person which was not present in group. but since do_prepare_output method is same in both, that feild was getting set for group as well. When we placed restriction this error got removed.
Best regards
Pankaj Kumar -
Error: 'BP category 1 does not fit the data in category 2'
Hi,
i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
thanks:)
pushpa
*table for storing the line by line records in the excel file
TYPES: BEGIN OF TTAB,
REC(1000) TYPE C,
END OF TTAB.
DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
*variable for storing the name of the excel file to be uploaded
DATA UP_FILE TYPE STRING.
*data to be uploaded
TYPES: BEGIN OF TDAT,
FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
END OF TDAT.
DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
ADDRESS TYPE BAPIBUS1006_ADDRESS,
BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
PARAMETERS P_FILE TYPE LOCALFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = 'X'
CHANGING
FILE_NAME = P_FILE.
START-OF-SELECTION.
UP_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = UP_FILE
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
*writing out the contents of the internal table itab
LOOP AT ITAB.
WRITE:/ ITAB-REC.
CLEAR IDAT.
SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
APPEND IDAT.
ENDLOOP.
LOOP AT IDAT.
MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
IDAT-FLD2 TO ADDRESS-STREET,
IDAT-FLD3 TO ADDRESS-CITY,
IDAT-FLD4 TO ADDRESS-REGION,
IDAT-FLD5 TO ADDRESS-POSTL_COD1,
IDAT-FLD6 TO ADDRESS-COUNTRY,
IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
'0001' TO CENTRALDATA-PARTNERTYPE.
CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
EXPORTING
PARTNERCATEGORY = '1'
CENTRALDATA = CENTRALDATA
CENTRALDATAORGANIZATION = ORGANIZATION
ADDRESSDATA = ADDRESS
IMPORTING
BUSINESSPARTNER = BUSINESSPARTNER
TABLES
RETURN = BAPIRETURN.
IF BAPIRETURN IS NOT INITIAL.
READ TABLE BAPIRETURN INDEX 1.
MESSAGE
ID BAPIRETURN-ID
TYPE BAPIRETURN-TYPE
NUMBER BAPIRETURN-NUMBER
WITH BAPIRETURN-MESSAGE_V1
BAPIRETURN-MESSAGE_V2
BAPIRETURN-MESSAGE_V3
BAPIRETURN-MESSAGE_V4.
EXIT.
ENDIF.
REFRESH BAPIRETURN.
CLEAR BAPIRETURN.
CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
EXPORTING
BUSINESSPARTNER = BUSINESSPARTNER
BUSINESSPARTNERROLE = 'BUP001'
DIFFERENTIATIONTYPEVALUE =
TABLES
RETURN = BAPIRETURN.
IF BAPIRETURN IS NOT INITIAL.
READ TABLE BAPIRETURN INDEX 1.
MESSAGE
ID BAPIRETURN-ID
TYPE BAPIRETURN-TYPE
NUMBER BAPIRETURN-NUMBER
WITH BAPIRETURN-MESSAGE_V1
BAPIRETURN-MESSAGE_V2
BAPIRETURN-MESSAGE_V3
BAPIRETURN-MESSAGE_V4.
EXIT.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
ENDLOOP.Hi Pushpa,
you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
EXPORTING
BUSINESSPARTNER = SEARCH_PARTNER
CONTACTPERSON = CONTACT_SAP
VALIDFROMDATE = '00010101'
VALIDUNTILDATE = '99991231'
DEFAULTRELATIONSHIP =
ADDRESSGUID =
CENTRALDATA = WA_CENTRAL_DATA
ADDRESSDATA = WA_ADDR_DATA
TABLES
BAPIADTEL = I_TEL_DATA
BAPIADFAX = I_FAX_DATA
BAPIADTTX =
BAPIADTLX =
BAPIADSMTP = I_EMAIL_DATA
BAPIADRML =
BAPIADX400 =
BAPIADRFC =
BAPIADPRT =
BAPIADSSF =
BAPIADURI =
BAPIADPAG =
BAPIAD_REM =
BAPICOMREM =
RETURN = I_RETURN
hope this will help you
Siva -
Iphone 5s does not transmit voice during phone calls
iphone 5s does not transmit my voice during a phone call. Just started happening. The microphone works with Siri and the speaker works fine as I can hear the person I called.
Hello there, Susina.
The following Knowledge Base article has some great pointers for troubleshooting your issue:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Iphone 4 does not stay connected to my network
Since upgrading to 6.1, my iPhone 4 does not stay connected to my network. I have to input my password each time I leave my house. My other devices stay connected, so the issue is with the upgrade. Has anyone found a way to keep their IPhone connected to their network? Thanks.
I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.
-
WiFi iPhone 4S does not work after update iOS 6.0
WiFi iPhone 4S does not work after update iOS 6.0
This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty? -
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
Check to make sure you have enough free space to include the videos.
-
I have a Macbook, 13" screen, purchased in 2007. I want to hook it up to my HDTV; I purchased a mini display port to hdmi adapter but it does not fit. Any suggestions?
If you connect yourMacBook using a MiniDVI/HDMI adapter you will need to use external speakers for audio since the pre-2010 MacBooks will only send video through the MiniDVI or MiniDisplay Port . The MiniDVI/HDMI doesn't carry audio and there's no audio plugs on the TV to work with HDMI since it's expecting audio with the HDMI.
If your TV has a DVI input plug you can use a MiniDisplayPort/DVI adapter. Then a DVI cable to the DVI input plug on the TV. The TV will have RCA audio plugs for use with the DVI. Plus DVI gives a sharper image than HDMI. -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J
Maybe you are looking for
-
Issue with CRM_STATUS_CHANGE_EXTERN - Not updating user status immediately
Hi Everyone, I need to set a user header status in CRM based on the delivery block selected in ECC sales order. for example, If the delivery block is A2 then user status should be E0008(Image review) etc. For this to happen in the transaction CRMD_OR
-
Regarding PF Status In ALV Grid Dispaly
Hi.. Can you please tell me how to set PF status in ALV Grid Display. Regards Sandeep.
-
Sol Man_Project administration
Dear friends, I am using Sol Man 4.0. In t.code SOLAR_PROJECT_ADMIN, under "system landscape" tab, under sub tab, "Systems", i am finding two icons namely, 1. Select scenario 2.Shipment routes What is the main functionality of these options? In wha
-
I have pixelation on my TV. It is coming from FIOS, as it does not appear when we are watching DVD's or Roku. As a matter of fact, it does no happen in FIOS menus, only when watching live TV, recorded programs, or on demand. There is a band, about
-
hi, 1)I want know what is the time required to take 20GB database cold backup. What are critiria depends on the same? 2)If I export same 20GB db to dumb file - by what is % reduce the data? Thanks in advance... By Mahi B'lore