Iphone 5c does not work rear camera (screen is black) and a flash light since yesterday. Maybe someone knows what happened.

Yesterday stopped working camera application turns on but the screen is black. It does not work too flashlight. It is gray in the control panel. Maybe somebody know what happened if I need to return my phone service warrants.

Hello szpryczek,
Thanks for using Apple Support Communities.
To troubleshoot issues with your iPhone camera, please follow the steps below.
Camera
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
If the issue persists after the previous steps, please click the link below to contact Apple Support.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take care,
Alex H.

Similar Messages

  • HT4061 I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

    I have an iphone  5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?  Does a totally dead battery have that effect?  I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
    Please help, thanks in advance all1

    Hi eggroll77,
    Welcome to Apple Support Communities.
    That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
    iOS: Restore errors 4005, 4013, and 4014
    I hope this helps.
    -Jason

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

    Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

    IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

  • Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

    Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

    We are all iphone users just like you.
    Do you have a question for fellow iphone users?

  • What should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

    what should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

    If there's a hardware defect and your phone is under warranty, bring it to Apple for replacement.

  • Air 2.7 and MacOs Lion: iPhone packager does not work

    hi. After upgrading from Snow Leopard to Lion the iPhone packager does not work. It throws an error concerning the Application Version Number. Is this a Know bug? Is there a work- around?  Thanks.  Michael.

    Yeah sorry, the start of my descriptor looks like this:
    <?xml version="1.0" encoding="utf-8" standalone="yes"?>
    <application xmlns="http://ns.adobe.com/air/application/2.7">
      <id></id>
      <versionNumber></versionNumber>
      <filename>d</filename>
      <description/>
      <name></name>
    When I go to compile the app the compiler inserts that line into my descriptor at the very bottom (just before the application tag closes). It's weird, I tried setting the <application xmlns="http://ns.adobe.com/air/application/2.7"> back to 2.6 and it works and seems to compile in 2.7 (as I noticed the timer bug).
    Anyway, I only tried 2.7 because I heard the GPU fullscreen bug had been fixed, but given that the timer issue still remains I'll go back to 2.6 for the time being.
    Thanks

  • Hi, My iPhone 4s does not work properly with the sound.

    Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

    Hi M3MB3R,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting tips in this article helpful:
    iPhone: Sound muffled or low from the speaker or when speaking into the mic
    http://support.apple.com/kb/TS1631
    Cheers,
    Jeremy

  • My iphone 5 does not work properly with Ford Sync,

    Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
    Can someone help.

    Hi M3MB3R,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting tips in this article helpful:
    iPhone: Sound muffled or low from the speaker or when speaking into the mic
    http://support.apple.com/kb/TS1631
    Cheers,
    Jeremy

  • IPhone 4 Does not charge or get recognized by laptop and the home button does not work at all.

    The home button on my iPhone 4 does not work at all. Also, when i plug it in to charge, it does not charge at all, and it doesn't even say that it is connected. What will Apple do about this if i send it off? Will I get a replacement? All answers much appreciated.

    Buenas Matias,
    Si, pude solucionarlo hace unos dias, al final me arriesgue y compre el "dock connector", un juego de destornilladores para iPhone 4, lo desarme y lo cambie, y al toque empezo a cargar.
    No queria esperar semanas para el repuesto de iFixit asi que lo compre en MercadoLibre, estan 160 mangos, y si no te queres arriesgar a desarmarlo y cambiarlo vos, hay algunos que te hacen la instalacion tambien.
    Pero primero averigua bien que tengas el mismo problema que yo, o sea el dock connector sirve para lo q describi arriba. Si tenes otro sintoma te recomiendo que investigues porque capaz es otra cosa y terminas gastando un repuesto al pedo.
    Espero que te sirva.
    Saludos
    Gonzalo.

  • I have had no previous problem downloading iPhone pict to my Mac, but now, although the Mac sees the iPhone, iPhoto does not see the camera roll. Any ideas?

    I have had no previous problem downloading iPhone pict to my Mac, but now, although the Mac sees the iPhone, iPhoto does not see the camera roll. Any ideas?

    Repair your disk permission: http://bit.ly/OeD7U3.
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website www.lexmark.com
    Run firmware update http://bit.ly/AcNqbg
    Reset printing system http://support.apple.com/kb/HT1341

  • HT201436 Iphone ringer does not work

    iphone sound works but ringer does not work, any suggestions?

    Oh man...i feel like an ***.   That's what the "problem" was... wow.

  • Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?

    i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

    Charger60 wrote:
    i
    Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?
    No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
    Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

  • Back light iPHONE 3 does not work, how to repair?  I have tried all settings, nothing works

    Back light of my daughter's iPhone 3 does not work anymore, I have tried all settings and even did a hard reset, nothing helps.
    Can you help me? Thank you.

    You usually copy the screenshot to the clipboard and paste that image in an image editor program like Paint. Then you can save the image as a .jpg or .png file.
    http://www.wikihow.com/Take-a-Screenshot-with-the-Snipping-Tool-in-Vista
    http://www.microsoft.com/windowsxp/using/setup/tips/screenshot.mspx
    http://en.wikipedia.org/wiki/Screenshot#Microsoft_Windows

  • Upper speaker in my new iPhone 4 does not work properly. I hear strange sounds instead of speech. What to o?

    Upper speaker in my new iPhone 4 does not work. When somebody calls me I hear only strange sounds. Please, help!

    A couple of other things you can try -
    With my 2010 Ford Fusion (and SYNC) I received the same not optimized message a few times. There were several things I had to do but eventually, I got it cleared up. Not sure exactly how this will translate to your Toyota but maybe it will.
    - Try resetting the iPhone via a power off/on or a hard reset where you hold the home and power buttons. Then power back on and plug into your USB port.
    - In my case I had an issue with SYNC in my car where I needed to reset the USB port in my car. Not sure if Toyota has something similar. The fact that you said it won't charge makes me wonder if the USB port got disabled in your car. This happened in my car and an easy reset for me was to remove a fuse for a few minutes and replace.
    - Update your iPhone in iTunes and resync it there. Then try connecting again in yor car.
    - Delete and re pair your iPhone from your Toyota system
    Hope something here helps. Thanks

Maybe you are looking for

  • Access is denied  while creation hfm classic application in workspace

    access is denied while creation hfm classic application in workspace. i have given full roles and access to my admin user. still i am facing same issue. i am trying to create classic application workspace under Access is denied. Access is denied. Sho

  • How i authurize my computer

    how do i authorize my computer?

  • Sup101 cannot get data eventhough the connection shows open when debugging.

    Hi, I am using SUP 2.0, Created project sup101, generated code for windows mobile, opened it in visual studio 2008, deployed it, I get the screen I created and when I try to get the data zero rows are returned. The connection does show as open. I hav

  • Working with ibooks Author

    Hey guys. I've recently been doing some work with ibooks Author. I'm not sure if this is the subreddit to post my question to, so sorry if its not. My question is: How do you string a video across multiple pages within the document. I'm trying not to

  • Problems Passing Thread a object

    Hello, I am trying to pass a Thread a object to modify. I get the error : local variable dateLabel is accessed from within inner class; needs to be declared final                         makeClock(dateLabel);