Iphone 5c green screen after a drop

My green (very ironic) iphone 5c's screen turned green a week after dropping it (screen was cracked)
I can now no longer use the device and I am unsure on what to do now

Visit an Apple Retail store & pay the out of warranty fee for a replacement device.  Or, call apple care and arrange for an out of warranty replacement.  The fee should be around $269.00 + taxes for a replacement device.
HTH

Similar Messages

  • My samsung stratosphere has a green screen after I dropped it HELP?

    I dropped m y phone the other day and now the screen is green what should I do?

    Reboot it, if that doesn't work, you will need a new phone.

  • HT1766 Black screen after i dropped it but iphone is working.

    I dropped my iphone in water but after i dried it, it started working well and sounds also returned but camera doesnt work however last night i dropped my phone twice, one after another (Accidentally) and since then my iphone has had a black screen.

    frogfeet97 wrote:
    I dropeed my iPhone and the screen is shattered, but the more annoying part is this brown cluster of something on the side of my screen. It was originally much smaller but throughout the day the brown part moved and is larger. If I get my screen replaced will this go away?
    Maybe.
    But it will need to be checked out.

  • Black and green screen after water

    Well I did this huge accident by dropping my iPhone 5 into the toilet, but it was only in there for 2sec. I dried the phone and it was still working, but after a while it turned itself off. As a reaction, I hurried starting it again to check if it still was working and it was. But after that, my friend told me to turn the phone off again as soon as possible.
    When I got home, I placed the iphone in a bag of rice without any air in it, and waited over 24 hours to check it.
    When I checked it(which I think I did too early)- it worked, and I was so happy! Everything, the sound was just fine, but after a while it didn't respond to my touches and suddenly the screen became black and green pixle-ish and grumsy, but I could still see something in the background.
    I placed it back into the rice, but this time on my bathroom floor in a bag, because it's warmer there.
    I don't dare take it out before I know that most of the water is gone, but at the same time I don't know what the problem with the screen was. Is it possible to fix it? I think I maybe can get some help from a friend, but it would be nice if anyone knew what i could do, or what the problem is.
    I also read about people who got problem with black and green screen on their iPads. Everyone who read the thread had hit their iPads on the backside of the iPad and it got normal screen again.

    Thanks, I will try that after a couple of days. I want to make sure that my iPhone is completely dry inside.
    Anyone who knows how long it may take for an iPhone to dry inside after 2-3sec in water? Its in a bag of rice.

  • ATI tvPortal green screen after 10.6.2 update

    After updating my MacBook Pro to 10.6.2, when I run ATI tvPORTAL the TV display is green. I have an ATI TV Wonder 650 USB for Mac. It was working fine before (10.6.1). Anyone else having problems?

    Same thing here. I already had OS X 10.6.2 and when I installed the original drivers for the TV tuner fm the CD that was included, I had good audio and marginal video. I ran the auto-update on the software and downloaded/installed the latest version of the ATI drivers. That resulted in the same problem everyone else has listed: green screen and audio on all channels. I too tried to back out the update and reinstall the original drivers and now have crappy video and no audio. Tried calling ATI and their help line refers you to a former component supplier who informed me they have no visibility on the Mac drivers for the new ATI tv tuners, and suggested I contact Apple.
    It would be ideal if someone could come up with the fix on this issue.

  • Can I change the background for the green screen after my project is completed?

    Hello,
    My daughter just made a full project in imovie then tried to add the green screen background and found that she has to redo the whole project.  Is there anyway for her to add this after the fact? 
    Thank you,
    Heather

    If these are purchase movies and not rentals, from iTunes, on your computer, you can select the movie in iTunes, use the key combination command-I to get the info on the movie. A info window pops up. Click the Options tab, a volume slider appears at the top of the window, slide the slider all the way to the the right, click the OK button at the bottom of the window. Then reconnect and sync your iPad, again, to the computer and wait for the movie to update to your iPad, then once everything is complete, eject the iPad from the left hand pane and disconnect. When you play the movie, again, from the iPad, the volume should be louder.
    I do not believe you can do this with rented iTunes movies, though as I do not think they are editable as a rental.

  • ATI TvPortal Green Screen After Update to Snow Leopard

    Hi,
    Is there any solution to this problem. I left messages at Diamond Multimedia and ATI and both
    blame Apple for this problem.
    Since the OS update my TV card is a plastic brick.
    I would appreciate if you give me an answer to this problem.

    Same thing here. I already had OS X 10.6.2 and when I installed the original drivers for the TV tuner fm the CD that was included, I had good audio and marginal video. I ran the auto-update on the software and downloaded/installed the latest version of the ATI drivers. That resulted in the same problem everyone else has listed: green screen and audio on all channels. I too tried to back out the update and reinstall the original drivers and now have crappy video and no audio. Tried calling ATI and their help line refers you to a former component supplier who informed me they have no visibility on the Mac drivers for the new ATI tv tuners, and suggested I contact Apple.
    It would be ideal if someone could come up with the fix on this issue.

  • Green screen after-the-fact

    I shot my subject without Vlog It -- with a camera and an empty (but lit) green screen behind him. Now I want to use the recording in place of a live person and run Vlog It. Is there a way to key in a background, add some supers, add the in/out graphics and music, etc. -- like a regular Vlog It session, but with the person on tape? Thanks, Jake

    I shot my subject without Vlog It -- with a camera and an empty (but lit) green screen behind him. Now I want to use the recording in place of a live person and run Vlog It. Is there a way to key in a background, add some supers, add the in/out graphics and music, etc. -- like a regular Vlog It session, but with the person on tape? Thanks, Jake

  • Green Screen AFTER Edit?

    I am using iMovie '09 to edit an interview with a green screen.  The interview is already cut up and mixed in with still pictures.  Is there any way I can still ustilize the green screen tool without having to re-edit since the proper order is to lay down your background first?  Thanks in advance for your help.

    There are some tools to transfer fcp7 projects to fcpX.  Go the app store and do a search for 7toX.  I haven't spent much time with fcpX.  I did purchase  7toX but didn't have much luck transferring a project successfully.  Might have been user error, might not, so I'd seriously suggest that you test your workflow before actually trying to use any workflow.

  • HELP! CS3 blank green screen after render. with video not stills

    hey. it seems that i have the same problem that other users have found when they have lots of still photos in a timeline and that is once you render they are just replaced with a blank green screen. however i dont have any stills in my timeline and it happens to every project that i open. once i alter a clip whether it be a transition, effect or change in speed and then render it all i get is a green screen. i am pretty sure i have some kind of spyware virus on my computer but would this be able to affect premiere pro cs3 like this? i have tried all the tips given to people that have the problem with stills such as changing the opacity and increasing my computers virtual memory but none of this seems to be helping me. i really hope someone has a solution as i have about a years worth of footage stockpiled that i was just about to start editing but cannot do so. thanks alot.
    Xander Beccari

    First, work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed, report back with the DETAILS asked for in the questions at the end of that link

  • Iphone 3G white screen after changing diaplay

    I have an apple iphone 3G, I bought a new display from ebay for my iPhone, It was a pixel stucked display and after I put it to my iPhone
    I plugged it because there was about 3% battery last time. Now my iPhone screen is white, Can anyone help me to fix this pls!!!!

    I had the same issue with my 3G a few years ago after dropping it. The solution for me was replacing the screen, so it may be worth double checking that you installed the new screen correctly (i.e. no loose/faulty connections etc.).

  • Iphone 6 plus screen scratch without dropping the phone

    Purchased my iPhone in November and a good case for it minus the screen guard. After 2 months of use, there is a thin line which cannot be felt from the top till middle of screen. Taken it to an authorized service center but received a denial stating that it is a physical damage and this is not covered under warranty.
    I am sure many others would be facing a similar issue but would like to know if there is any solution to this issue like a replacement. Cost mentioned to me for a screen replacement is Rs.26500/-.

    ravc wrote:
    Purchased my iPhone in November and a good case for it minus the screen guard. After 2 months of use, there is a thin line which cannot be felt from the top till middle of screen. Taken it to an authorized service center but received a denial stating that it is a physical damage and this is not covered under warranty.
    I am sure many others would be facing a similar issue but would like to know if there is any solution to this issue like a replacement. Cost mentioned to me for a screen replacement is Rs.26500/-.
    Yes glass can be scratched. Yes scratched screens are not covered under warranty. Incase you are not clear what the service centre told you about your options you can ether replace the screen, buy a new phone, or keep the phone as is.

  • IPhone 5s broke screen after 3 days of purchase what to do?

    What can I do? So sad

    If you did not purchase Apple Care +, then user damage is not covered under warranty. Did you drop the phone, by chance? I find it hard to believe the screen just "spontaneously broke"

  • Nokia 920 heavily cracked screen after short drop ...

    Well, it happened. My brand new Lumia 920 took a three foot drop out of my coat pocket onto the pavement below while I was getting out of my car. The result was a heavily damaged screen. 
    Cracks now cover over half of the screen, and small, tiny (and sharp!) pieces of glass are slowly falling out. Phone performance is also spotty, as it now randomly turns off and the OS regularly freezes.
    I was VERY surprised to see that there was any damage at all, considering this is Gorilla Glass 2.0. I've seen the videos - the drop tests, using the phone to hammer in a nail, etc. I couldn't believe that a BARELY 3 foot drop did this to the screen.
    Anyways, I'm pretty bummed about my brand new toy. Anybody know what options I have =-/ ...? I got it through AT&T.
    Attached is a photo of the damage =-(.
    Attachments:
    photo.JPG ‏182 KB

    OUCH!!!
    What a first post.
    it must have hit just perfectly to do that! that is really a bummer in deed. Not sure why do easy.
    I had my n9 fly off the treadmill at 8.5mph, fling back about 12 feet and SLAM into another unit and though the screen cracked, it was nothing like that and still worked perfectly.
    being it is so new, I don't think there are even glass replacements available yet.
    did you get insurance?
    if not, you could get it through something like squaretrade, and they will repair or replace your unit...

  • Help me my iPod is white screening after I dropped it on the floor what happened and how can I fix it?

    I was playing an app on my iPod and I got up to go to the restroom and I decide to put the iPod in my pocket then as I legit go I heard a clack on the ground and found my iPod on the floor there was no physical damage to the screen face, no scratches, chips, or cracks.
    I then try to wake up my iPod and it white screened but does not shutdown, just a constant white screen. I tried to hard reset it and it continued to white screen when it restarted. What happened to it?

    Only if it is a loose connection
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Try fixing it yourself if you are up to it
      iPod Touch Repair – iFixit          

Maybe you are looking for

  • Saving Data: Array -- XML file?

    Hi there, I have meta data that I want to save in an archive. Should I push this into an multidimentional array then create a method that writes the contents of the array to an xml doc? The user will go through a news feed, choose items that are impo

  • Where to find facetime in my iMac?

    Pls help me! I don't know where to start facetime on my iMac. I would like to use it to chat with my sister in Taiwan. Thx a lots.

  • Desktop not saved

    Hi, Just restarted Lion and the layout of the Desktop has not been saved. This just started recently. any one know of a settling which controls this? I may have inadvertently chnage it. Any help appreciated. This is on my iMac. Running 10.7.2. Thanks

  • The new Import Sequence feature causes Premiere Pro CC to CRASH!

    *** This was happening before the update, and the update to 7.01 has not fixed this issue.*** I have a series of intros and end slates for a YouTube series.  I (kind of) love the new Import Sequence from Project feature, new in PPr CC.  But more ofte

  • GG Event Action

    Hi, We have tried to store the some token value in file , for that we have written simple shell script, When ever any insert happen in one of the table the optype and table name will be stored in text file. For that we have used the below parameters