IPhone 5c just showing Apple logo and won't go any further

Tried swithching it off but will not respond and actually power up

Plug into your iTunes and do a restore.
Use iTunes to restore your iOS device to factory settings - Apple Support
PJRS

Similar Messages

  • HT1414 Can anybody help me my iphone is not starting it only shows apple logo and is not going any further i have tried to hard reset it but it still doesnot starts.Will anybody tell me How To start it...

    Can anybody help me my iphone 4 is not Satrting it only shows the apple logo on start screen and is not going any further I have tried resetting it but it is still not starting.....Will anybody tell me whats the Problem....

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note:
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

  • HT201210 how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it :( pls help

    how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it pls help

    From the article that the question was posted from:
    Error 1611
    This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Try reading the solutions you find in the future and follow them.

  • I tried to restore my iPhone 3G by doing so on the iPhone but now it just displays the Apple logo and refuses to proceed any further. Any suggestions?

    I tried to restore my iPhone 3G by doing so on the iPhone but now it just displays the Apple logo and refuses to proceed any further. Any suggestions?

    Hello, Spedellen. 
    Thank you for visiting Apple Support Communities. 
    When experiencing issues restoring an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

  • Error 3194 still presist while restoring ipod touch 4g, just shows apple logo and wont start

    Method 1: i have tried almost everything, 'hosts' file editing (adding and deleting that ip gs.apple.com thing)
    Method 2: redsnow, snowbreeze,ireb (custom ispw and fetching thing)...
    now my ipod is in dead case, it just gives apple logo  and wont start.
    Method 3: TS 3.0 and 1.0 checked, certificate xyz... uncheked from intertnet explorer-> internet option -> advanced -> security
    Method 4: netsh xyz  (comand) in cmd...
    Please Help thank you.
    "Details:
    ipod touch 4g
    ios 6.1 installed (lastly)
    jail broken but deleted cydia from it
    then tried to restore it always gave Error 3194,
    then restored it from its backup file after that it didnt opened or just showed apple logo thats it."
    my itunes on dignostic gives this report,
    Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP xw4400 Workstation
    iTunes 11.1.1.11
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 001AB71808E6CBD8
    Current user is not an administrator.
    The current local date and time is 2013-11-29 04:19:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 8400
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.1.11 is currently running.
    iTunesHelper 11.1.1.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {BC8F9388-D244-4F12-92A3-A26318EE6C52}
    Description:    Broadcom NetXtreme Gigabit Ethernet
    IP Address:    192.168.1.102
    Subnet Mask:    255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:    Yes
    DHCP Server:    192.168.1.1
    Lease Obtained:    Fri Nov 29 04:16:55 2013
    Lease Expires:    Fri Nov 29 06:16:55 2013
    DNS Servers:    192.168.1.1
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-11-29 04:18:45.

    lllaass thank u bro, but none worked for me
    i have tried all these methods n above which i mentioned before....
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    in the end i went ot market n paid him 1.94$ and he restored it to 6.1.5... and said apple has closed other ios updation except 6.1.5 ...but still thank u soo much learned some new stuff from u...

  • 3g just shows apple logo and timer

    OK so need a bit of help here
    My iphone just keeps showing the apple logo and timer
    I have tried to restore it a number of times and it just goes back to the same thing.  It also wont let me restore it from the back up and have to do it as a new phone been like this for a week.
    Any ideas what else i can try
    Oh dont know if this is important but the logo doesnt go dull even when i leave the phone only turns of after the battery has died.
    Thanks

    Next step, try DFU Mode Restore.
    Connect iPhone with USB cable to iTunes. Hold both Home and Power buttons for exactly 10 seconds, then let go of Power button, keep holding Home button until iTune detects iPhone in Recovery Mode, usually this take less than another 20 seconds. If the iPhone screen is black, this is DFU Mode. If anything is on the screen this is not DFU Mode. Keep trying the above process until you get DFU Mode (which is Recovery Mode with Black Screen). Then Restore the iPhone Firmware.

  • IPhone 5c crash shows green and red lines then shows apple logo and won't come on.

    My iPhone 5c has been crashing for some reason. When it crashes it shows green and red lines followed by an endless loop of what seem to be restarts (because the apple logo keeps on flashing). I have no clue as to what could be causing this but it is worrisome. I my phone hacked ? Or is it a mistake on Apple's end? Please reply ASAP.
    Thank You

    You may want to visit an Apple Retail Store or an authorized reseller to have your device serviced. It seems that your device may have a failing component preventing it from working properly.

  • My iPhone is flashing the apple logo and won't switch on or off

    Hey I have just updated my iPhone 4 and it is flashing the apple logo, I don't own a mac only an iPad is there any way of resolving this? I have plugged it in to a power source to see if that will fix it and nothing works !
    Also the round button is broken on the phone so this won't allow me to reset it :(

    Sorry, but connecting in recovery mode would be the only option before getting it serviced by Apple or visiting an Authorized Apple Service Provider:
    iOS: Unable to update or restore
    Apple - Support - Service Answer Center

  • IPhone 3G Stuck at Apple Logo and won't charge from USB

    Help!
    My wife recently dropped her iPhone 3G down the toilet (clean water!), after retriving it and allowing it to dry I turned it on but there was no response.  I plugged it in to the mains and switched it on, at first all looked good, it lit up and displayed the Apple logo, however after about 20 seconds the screen went blank and nothing else happened.  I pressed the power button again and the Apple logo reappeared, again for about 15-20 seconds.  It does nothing else and isn't charging.
    Having read other posts about performing a factory reset, I plugged the phone into my computer but it doesn't come on at all (not even the Apple logo).  The USB port and cable work as they charge my iPhone4 fine.  This means that Windows/iTunes are unable to detect it is even there so I can't turn it on to perform a reset.
    Any advice?  Shorted battery?
    Thanks!

    Are you doing this?
    If you can't update or restore your iPhone, iPad, or iPod touch

  • HT201263 iPad 3: it just shows apple logo and even with force shut down it comes up to same.. Last time it went in recovery mode and itune couldnt resotre.... real s````t product... not happy.

    is any one can help? it that a system or just some app issue? and why it happens during charging or just after charging........

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iphone is just showin apple logo and when trying to restore it error number 2001 and 1604 is coming please help ASAP

    please help me..!

    Hi King Chad!
    I have an article for you here that can help you performa common troubleshooting step for issues such as this:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • After upgrade iphone3GS now just shows apple logo

    after upgrading my iphone 3GS just shows apple logo and is frozen
    please help.

    Read:   http://support.apple.com/kb/HT1808?viewlocale=en_US&locale=en_US
    (I'm assuming the device was not jailbroken)

  • I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????

    I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????

    It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
    If that still won't work, post back with detailed information as to what exactly does happen as you go through the process.

  • Plz help!!!!! i have iphone 3g and i have chose the option of reset to factory shipped settings ... but now it does not start .. it just shows apple logo thats it .... plz can anybody help me

    plz help !!!! i have iphone 3g and i tried option to reset my phone to factory shiped settings ..... but now it does not start even .. it just shows apple logo again n again ..... after that i went to recovery mode as stated by apple support and did things as stated .... but then i got the message iphone cannot be restored due to some eror 1015.....can any one please help me .. i will be highly obliged ...

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note:
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

  • TS3681 I went into recovery mode - and keep receiving error 4005 - tried different usb, computers, did all updates possible nothing helps, my iphone screen shows apple logo and constant waiting circle

    I went into recovery mode - and keep receiving error 4005 - tried different usb, computers, did all updates possible nothing helps, my iphone screen shows apple logo and constant waiting circle

    Same here. I tried to update my iPhone 5S and iPad 4 to 7.1 but iTunes wiped out them. This thing already happened for iOS 7.0.6 update. What happened to Apple? I am really curious whether Apple is aware of this problem.

Maybe you are looking for

  • Cannot manually manage music and videos without erasing and syncing first

    I have an iPhone 3G bought new from the Apple store using 2.1. Using iTunes 8.0 and checking the "Manually manage music and video" checkbox, iTunes prompts me to "Erase and Sync", no other option is available to me. It was the same when using version

  • Trying to read an XML file from the resources

    Hi, I am having a problem reading a file from the resources: In my project I have data.xml in my project resources folder. I tried the following and it does not work: File xsltFile = new File("resources/data.xml"); or File xsltFile = new File("/resou

  • Automatic conversion of TDMS files to *.mat procedure in Diadem

    Hello to all, I have a very large set of data aquired with a PXI chassis. The data is saved in TDMS files. Each TDMS file contains data from  10 acquisition channel. I have to convert this data into Matlab readable fiels, *.mat files. Unfortnately, t

  • Can't tell when i have reached the end of the file

    Hi i'm trying to read a character at a time from a file but i can't tell the program when to stop when it has reached the end of the file THis is the code BufferedReader br = new BufferedReader(new FileReader("input_dat.txt")); while ((c =(char) br.r

  • Workflow Deferred Agent Listeners restarted

    Hi , Workflow Deferred Agent Listeners restarted , I checked the log file, it shows following error : Can you tell me , what is this error ? [Aug 2, 2012 4:16:51 AM GMT]:1343881011810:-1:-1:usmlrs504.arrow.com:192.168.93.206:-1:-1:1:20420:SYSADMIN(0)