Iphone 5s bricked after ios 8.02 update

Yesterday I attempted to update my iphone 5s to ios8.02. The update didn't appear that big and my wifi is currently out so I decided it should be ok doing it with 3g. The update appeared to download fine and I proceded to install. The loading bar was on for about 5 minutes at which point I left it to do stuff around the house, when I came back the phone was stuck on the black screen with the apple, I left it longer and noticed every minute or so the screen would flash blue then go back to the apple. I can't turn off the phone or restart it, I simply wait until the battery finishes. I've tried since the battery emptied but still the same situation.
Are there any fixes I can try myself as I am in Sardinia and as far as I can see there are no authorised dealers nearby.
Btw nothing unusal installed on my phone just ios 8.01

Hi Si7, 
Welcome to the Apple Support Community!
I understand that you attempted to update your iPhone to iOS 8.0.2 but the update never finished. In this situation I would recommend working through the troubleshooting steps outlined in the attached article. 
iOS: Not responding or does not turn on
Cheers,
Joe

Similar Messages

  • Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home.  Any suggestions on where to look to fix this?

    Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home.  Any ideas on how to fix this?

    That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
    You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

  • IPhone 3g dead after iOS 4.1 update

    Hi All, like many I waited to update my iPhone 3g to update from 3.1.3 to 4.0.x.
    So yesterday I did perform the update. Everything went well, iOS 4.1 was in my iPhone, but when iTunes started to sync my personal data back, the connection got lost and the iPhone rebooted itself. It kept doing that during data sync. So I restored the iPhone with new firmware, but the same problem occurred during the new firmware load.
    Now it only boots in recovery mode and every time I want to recover my iPhone, it reboots you see a progress bar on the iPhone, but the iTunes comes with an error 2. There is no way the iPhone can be restored now. I tried 2 versions of iTunes 9 and 10. I try setting it in dfu mode and restore, but no luck.
    I never jailbreaked my iPhone!
    Patrick

    Hi Patrick
    I have an iPhone4. I tried upgrading to os4.1. Had the exact problem like you had. I thought I bricked the phone. But I got it come back to life eventually. Here is how I did
    I used a program called tiny umbrella. I clicked start TSS server then clicked kick out of dfu mode(please check wording for similar ones. I cannot remember exact name from top oft head. But it is below the start tsp server area). Then magic happened the phone reboot and starts like normal. But all my app installed was lost. Luckily all contacts emails messages were retained. That is very lucky! Hope that helps.
    Message was edited by: Waterflyer
    Message was edited by: Waterflyer
    Message was edited by: Waterflyer

  • IPhone 4 bricked after 7.0.6 update, anyone else have this issue?

    During the update to 7.0.6 the iPhone 4 failed to apply the update and booted up in restore mode.  When restoring the iPhone fails during the hardware firmware write and displays an "unknown error" Error 12.  It happens on multiple computers and versions OSX, including the latest version of Mavericks.  Apple support walked through after everything I tried failed and proceded to tell me that the the phone is broken and must be sent in for repair at a cost of $149.  So, unwilling to take responsibility for an update breaking a phone that was working perfectly before 7.0.6 update, that is how Apple's newest security patch bricked one of my phones.  Beware with the install!
    I was wondering if this was common with others or not?  Have you had a similar issue, let me know?

    Sometimes a hardware issue becomes apparent after a software update, and sometimes its pure coincidence. Most peoples updates will have gone well, forums show the small minority that dont unfortumnately. My 5s and my wifes 5c both worked fine for instance, even though thats no good for you, i'm just saying its not all phones and there is always a flurry of these incidents after software updates. Contact Apple and via the help line, if you have an extended warrranty as you say your phone is 1.5 years old. If there is an issue they will ask you to send your phone in, and an exchange can be made if you live to far from your nearest Apple shop possibly. If you are out of warranty then you can do an out of warranty replacement. As to it being a software issue, have you done a DFU mode restore? Hope it works out.

  • IPhone 4S bricked after iOS 5.0.1 upgrade

    I just tried to upgrade my iPhone 4S to iOS 5.0.1 with iTunes and I got an error message before it could complete.  Now my phone is not recognized by iTunes and the phone only shows the connect to iTunes logo.  I tried rebooting the phone by holding down the lock button and home button but it just shows the Apple logo then the connect to iTunes logo.
    I'm using the latest iTunes version on Windows 7 x64.
    Any help would greatly be appreciated but I'm not very hopeful I'll be able to fix this myself.

    The restore on my second computer worked and I was able to sync the phone with my main computer to get everything back on it.
    So, for anybody that runs into the same issue here's the steps I took to fix it.
    1. Install iTunes on a different computer
    2. Plug in the iPhone to the secondary computer
    3. Perform a factory default restore
    4. Unplug the phone from the secondary computer without setting up the iPhone.
    5. Plug the iPhone into the main computer
    6. It should ask if you want to restore from a backup
    7. Wait for the sync to finish.
    Not entirely sure what went wrong to begin with but I did send off the crash report to Apple when it asked so hopefully they can fix it.
    Thanks to the two responders that tried to help but luckily I had a spare computer to work with!

  • I have an IPhone 5S and after IOS 7.1 update, touch ID isn't working!!

    I did the update of ios 7.1, and now my touch id isnt working! Even reading new prints!

    Go into Calendar and click on Calendar on the bottom center of the page. That should list the calendars on your device. Down at the bottom of the list is "Other". That should display which Holiday calendar is on your device. As far as how it is selected, I cannot be sure of that, but I would tend to believe it has to do with your regional settings.
    What troubleshooting have you tried on the device?

  • IHome no longer works with iPhone 4s after iOS 6.1 update.

    My iHome no longer works with iPhone 4s after iOS 6.1 update.  Prompts message 'This accessory is not supported by iPhone'.  Has anyone come accross this and is there a fix?

    Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

  • My iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode now.usb to itunes.keeps saying!itunes doesn't recognise phone ,after update done now error.i recall doing a firmware update for the old 5.0 update.happened again.i recall

    my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?

    UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )

  • I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.

    I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.
    My MacBook Air is connected and my roommates phones are also connected, but my iphone that always was connected to the same network is no longer connecting to the wifi.
    The network is shown on the device but I can't join it.
    Whats going on? Does someone know how to solve this issue?
    Thank you!

    Problem persisted after fixes were done so wife called apple today.           Their fix is to turn cellular off when in the house and turn it back on when she leaves- the 4 doesn't keep the password so she has to enter the password too... This wasn't a fix ...it's just resolving the connection problem... They also said that they made ios6 have security features so nobody can hack into the wifi without having the password and it has to be entered to use the wifi.  My 5 and the iPads stay on with no problems.  It's just the 4.        So far so good...she's had wifi all day when home.    It's inconvenient but it's either completely reboot it with iTunes (which doesn't work for her) or buy a new phone and she won't do that either.
    So...Apple is saying that she didn't have to do the updates either and could've stayed with the previous iOS     but !!!too late now!!!  We've updated because we think our phones will run better but the ios6 just made it a pita for users
    I wonder if the hackers of the world are having as many issues as the peeps who are just trying to use their wifi??

  • My iphone is not showing updates in appstore after ios 6.1 update p.why is this happening....

    my iphone is not showing updates in appstore after ios 6.1 update p.why?

    I have the same problem here, appstore still notice me that an app need to be updated, but when it opened, it wont shown up. Only white blank screen without any loading on update tab in appstore.

  • IPhone 4 still gets crashed even after ios 7.1 update, & sometimes fails to reboot! However it gets rebooted after 30 to 60 mins later by itself. "HELP" please somebody

    iPhone 4 still gets crashed even after ios 7.1 update, & sometimes fails to reboot! However it gets rebooted after 30 to 60 mins later by itself. "HELP" please somebody

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note:
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

  • Iphone won't connect to tomtom via bluetooth after ios 4.2 update

    iphone 3GS won't connect to tomtom via bluetooth after ios 4.2 update. So no handsfree

    This is exactly the same issue that happened to me I've contacted Telus my service provider and Apple and spent countless hours on the phone with both they seem to be blaming each other for the problem Apple says it's a network problem while Telus says it's a hardware problem this happened right after I updated to 4.2 myself need help here no support. Lovvvveeeee this phone but what the $&@!'

  • Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???

    Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???

    Fixed it. It is on Chevrolet's end. Press config to access the configuration settings. Turn menu/tune knob to highlight vehicle settings. Press menu/tune to select the vehicle settings menu. Choose return to factory settings.

  • After iOS 6.1 update no GPS? iPhone 3gs

    GPS fails after ios 6.1 update
    Tried three diff apps that worked hours before,
    All fail to respond to GPS speed etc?

    Hi
    I have also the same issue after update to 6.0.1 , 6.1 & 6.1.2 , the problem started from 6.0.1 in 6.0 was ok both GPS & wifi , after 6.1 the wifi has also issues in iphone 3GS!! Apple do something!

  • After iOS 8.3 update, my iPhone 5 battery depletes

    After iOS 8.3 update, my iPhone 5 battery depletes rapidly.

    hi guys. i'm back.
    i solved my problem. i refer my iphone 5 to a local distributor. a repairman checked my iphone and i described my problem. he checked my battery. it was fine! then after an hour excavation around hardware solution he told me that the charging kit crashed because of heavy mobility usage!
    yes. i did not covered my phone with any cover. the cpu pressure by ios update crashed the kit! now my phone get back after the kit changed and work finally. i restored my phone to ios 8.2 now.
    i'm going to buy new iphone. but i'm really confused if such this issue really happened for iphone 6 too!!!!!
    i'm totally disappointed .

Maybe you are looking for

  • Trouble printing to Canon ip4200 over Airport Express from Windows XP

    I've just spent the last 4 hours trying to get my Dell laptop running XP to print to my Canon ip4200 USB printer connected to my Airport Express. My PowerBook (10.3.4) connected without issue and has been working fine. The XP laptop just refused to p

  • Ignore Numeric error with EXCEPTION

    Hi, I've got a PROC that reads all records from one table and INSERT them in another table, quite simple. The Only thing is that I want to IGNORE Numeric errors. So, if a get an error (numeric), I want Oracle to IGNORE the error and continue in my FO

  • Dashboard shows question mark for quicktime

    when i try viewing trailers in the movie widget, dashboard now displays a ? (question mark) over the quicktime icon.   latest quicktime, snow leopard 10.6.8....any suggestions?   thanks a bunch

  • IPod turns on and off, won't boot up or reset

    Hi all, I recently pulled my old iPod out of the closet, where's it's been since it stopped working two years ago. When I plug in it in to the AC and try to start it up, I get the Apple logo, but then it disappears--only to come back again. It just k

  • Master Data Flexible Upload from Application Server?

    Hi Group, Anyone know if it's possible to do a flexible upload of master data from a flat file on the application server? I'd like to upload FS items and hierarchies from the BCS app server into our development environment, then transport to QA & PRO