IPhone 5s - Camera Photos in Black and White

I have a new iPhone 5s and for some reason, when I click on Camera to take a photo, on the main photo it comes out as black and white rather than colour.  If I switch to Square I get colour, but on switching back to ordinary photo, it goes back to black and white again.
Anybody have any ideas about this?  I also have an iPhone 6 and checked on this, but when I open the Camera app I get colour too.
Both phones are running the latest version - iOS 8.1.2.
Thanks

Your black and white filter is probably on. When taking a picture, in the bottom right, there are three circles overlapping. Click on that and chose "none".

Similar Messages

  • My HPPhotosmartPlus printer is printing my photos in black and white I cannot seem to get them to print in colour

    My HP Photosmart Plus printer is printing my photos in black and white and I cannot seem to get them colored

    And this is related to the iPhone how?

  • HP photosmart premium C309a photos printing black and white not colour

    My printer is printing photos in black and white not colour as requested on print preferences. any ideas?

    Hi fossil1, are the color ink levels ok? Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Why does photoshop freeze every time I switch a photo to black and white?

    Why does photoshop freeze every time I switch a photo to black and white?

    Nobody can tell you anything without proper system and version info or other technical details, including what you actually mean by "switch to black and white".
    Mylenium

  • Colored photos turn black and white when opening a new document in Photoshop. [was: help]

    my colred photos turn black and white whenim opeing a new document in photoshop.'

    You don't have the right color mode selected.

  • How to make a photo half black and white with select colours

    Hey,
    Can anyone give me step by step instructions on how to make a photo black and white with abit of colour like the one attached... on CS4?
    Cheers

    Haven't seen you attached file as it takes a long time for attachments to load on this forum.  Try little camera icon instead.
    EASIEST way to have B&W in areas is to add Hue and Saturation adjustment layer.  Use sliders to make B&W.  Next paint on layer MASK, with black, to restore color in areas you want to show color.

  • Lightroom changes color photos to black and white error

    When I import NEF files into LR, they initially display as Colour, then during the render process, LR changes them to black and white. It has never down this in the past, is there a reson why LR is doing this now? The photos are colour (as shown in Capture NX and Windows explorer), and during importing, I selected 'None' for the develop setting. Does anyone know what I am doing wrong? Thank You :-)
    Particulars: Lightroom 2, Files: NEF (Nikon D300),OS: Windows XP Pro

    Thanks Jao, much appreciated...I must of changed the develop setting...now that I recall, I did go into the Develop->Set Default Settings recently. The reset resolved the issue.
    Thank You...CK

  • How best to print a color photo in black and white

    I use the Black and White adjustment on a series of colour photo's I've taken.  However when I go to print the photo's, colour still comes out in the print.  Anyone know what I'm doing wrong?

    It might be a problem with your printer's color profile. Did you try to set the color profile in the print dialogue to "black and white" (choose: "more options" in the print panel) ?

  • IPhone 4S only displays in Black and White. How do you restore color?

    I have an iPhone 4S. The screen only displays in black and white. How can I restore the color to the display screen?

    Triple click the home button to switch of the greyscale feature.
    Turn Greyscale on or off. Go to Settings > General > Accessibility > Gtreyscale. Or, use the Accessibility Shortcut. See Accessibility Shortcut on page 139.
    Accessibility Shortcut
    Use the Accessibility Shortcut. Press the Home button quickly three times to turn any of these features on or off:
    VoiceOver
    Invert Colors
    Grayscale
    Zoom
    Switch Control
    copied from page 150 of the user guide iOS8

  • Convert photo to black and white excpet for reds

    I have a photo and I would like to convert it to black and white except for the reds in the image. Is there a way of selecting a color range to be preserved and to convert the rest to black and white?
    thanks

    The problem is that the reds arnt just in one area.
    Is there no way to select a color range?
    I guess I could use the magic wand tool and set it off continuous while varying the tolerance, but this seems a but crude.

  • Drop iphone 4 on floor showing black and white lines

    drop on floor show black and white line

    And what troubleshooting steps have you tried so far?
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Taking a photo to black and white with one item left as color.

    I am trying to take a picture of my daughter and turn it black and white while leaving the tulips still in color. I cannot figure out how to do this, please help!

    Use the Smart Brush tool, and select the "Reverse Effects...Reverse - Black & White" option, with "Inverse" checked.
    Ken

  • Why is my camera only taking black and white photos?

    Suddenly my camera is only taking balck and white. Anyone know how to fix this?

    It could be that you have a filter set on the camera. Open the Camera app, tap the filter icon at the lower right, then tap None in the middle. More details: http://support.apple.com/kb/TI115

  • Camera only displays black and white

    camera only displays in black and white

    The equipment you have listed is an iPad with iOS 6.0.2. The original iPad had no camera at all. What device are you asking about?
    If you're asking about an iPhone with a more recent version of iOS, try tapping on the icon in the lower right of the camera screen that looks like three overlapping circles. Then, tap on the center thumbnail, the one labeled "None".

  • My ipod's screen went all fuzzy! Then it came on with black and white stripes/lines (vertical). Now it won't come on! What's wrong with my ipod? PLEASE HELP!

    PLEASE HELP!!!!

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • Sending order confirmation to E-mail

    Hi Experts, I need to send the order confirmation to E-mail for different customers. The e-mail id is same but i have to send to 300 different customers. Is there any option available in SAP to do this otherwise i have to trigger the output manually

  • Error when I put a component in the stage and I change any property

    Hello I'm using Flash CS4, as3 and adobe air file. I have an application with 3 scenes, first scene to login, second to set up, and third to see an video. The problem is that, when I put a component in the second or third scene, if a change any prope

  • Mailto opening additional window in IE9

    Hi, I am using navigateToURL(new URLRequest("mailto:[email protected]"), "_self"); command to open an email. This works fine as a standalone swf file but when I use the same in my flash e-learning course which has nested swf loading, it works fine in

  • BI : VENDOR DATASOURCE Hidden Fields

    Hi Experts , In the 0vendor_attr datsource, there were hidden fields. without unticking the fields, I loaded the data for the 0vendor infoobject . I wanted to bring the hidden fields data as well. in rsa6, I have edited the datasource,unticked the hi

  • Why did Mavericks upgrade not remove iWork 09 when App Store was used to upgrade?

    OS X v10.9.1... iMac 09 I have both versions of Pages, Keynote, & .Numbers. Perhaps this is a good thing! I was under the impression that OS X would tacitly remove the older version. What?  Thanks....