Iphone 5s incoming call number displays incorrectly.

Whenever I call my wife's Iphone from work, the number displays incorrectly on her caller ID. It is always dropping the third number of the area code, so if my work number was 123-456-7890, then when I call her it shows up on her phone as 124-567-890, it doesn't even show a ten digit number. So far I have noticed that it only happens when I call her from the landlines at my work. I also have the exact same iphone 5s on the same carrier and the numbers display perfectly fine on my phone so I feel like it's some setting in the phone. Before switching to an iphone we had her contacts imported from an old Verizon flip phone, not sure if that has anything to do with it. Has anyone seen or heard of a similar issue?
Thanks,
Dan

By the way I have completely reset all content and settings several times, tried turning off international assist, tried several suggestions I found online dealing with the sim pin, switched to a different phone to have the same thing happen on that phone also. I have the same exact iphone 5s and carrier and service plan and the numbers appear perfectly on my phone. I'm so confused why this is happening.

Similar Messages

IPHONE 4S incoming calls go directly to voice mail. This is a brand new replacement phone. Prior phone didn't have this problem

IPHONE 4S incoming calls go directly to voice mail. This is a brand new replacement phone. Prior phone didn't have this problem

Slide up from the bottom of your display to access the control panel.
Look for the button (should be at the top) that shows a crescent moon.
Tap that button. It should say "Do not Disturb: Off".
Then try it out and let us know if it worked.

Iphone 5c incoming calls on bluetooth car speakers not by default

OK i have a vw jetta 2012, used to have incoming calls answered on bluetooth by default.
Nowdays, since I have iPhone 5c, incoming calls, sound on speakers, but as soon as I answered, sound goes back to phone, then I need to change to vw phone by hand to hear conversation on the car speakers. Well tha's not safe, neither hands free calls, need help

We had the problem with our new iPhone 5 using i.o.s.6.0.1. So we updated to 6.0.2 and the problem continues. Sure worked great with the iPhone 4s though.
Makes me think we shouldn't have moved to the iPhone 5.

How to get incoming call number in j2me

hi all,
Is there any way to get incoming call number in j2me???
thanks in advance
mraj

You can't get this number at least till MIDP 2.0 devices.. you only have a interrupt events which call showNodify and hideNotify, pauseApp or start methods. Once can neither know if this interrupt is due to phone call, user switching to menu or sms etc..
Regards,
Raja Nagendra Kumar

No Caller Number Display since August 2014

Caller number display ceased to function on 9th August last year.
Since the we have been through the fault reporting process 3 times. Had an aborted (by Openreach) engineer visit and received a statement letter from BT saying they are looking in to the problem, it will take time etc etc.
My equipment works at my neighbours house. The neighbours phone has been tried in my house and does not work. I have removed filters, unplugged everything, tried the Master Socket. None of these things works.
It is very tough to run my business without Caller Number Display.
Can it be fixed???
If I switch to another provider will Caller Number Display then work??
Help!

Hi Unclenorm,
Welcome to the community forum. I am sorry to hear that you are having problems with the Caller Display. I'll be able to take a look at this for you. Please can you send me in your details using the "Contact The Mods" link found in my profile.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Add prefix 9 for incoming calling number of missed call only.

Dear,
I am wondering how to add the prefix 9 to incoming calling number of missed calls only, not the calling alerting number on the phone screen. For example, the local user 472 2001 calls our DID 482 3001 along with the calling number 472 2001 on the dialed phone screen, if I missed this call, in the directory missed call I can see 94722001.
I know I can add the prefix in the field incoming called party subscriber prefix on the gateway page, but when I do this, all of the calling number information show 9.
Thanks,
Kirin

If I understand you correctly, you would like to only change the missed calls/placed calls on your phones without changing the digits?
If you have an PRI, you can use this translation rule to change calling ID only on inbound calls:
Translation pattern to modify Caller ID to add a 9
voice translation-rule 1
Rule # /match/ /set/
(^.= Match anything begining with any number)(*= one or more digits) tranlasate to (9& = Take whatever is in the match phase and plug it in here)
rule 1 /^.*/ /9&/ type subscriber subscriber (subscriber = ton(Ton=Type of number) value local area)
rule 2 /^.*/ /91&/ type national national (national = ton value long distance area)
rule 3 /^.*/ /9011&/ type international international (international = ton value international area)
Config t
voice translation-rule 1
rule 1 /^.*/ /9&/ type subscriber subscriber
rule 2 /^.*/ /91&/ type national national
rule 3 /^.*/ /9011&/ type international international
voice translation-profile INBOUND_PSTN
translate calling 1
voice-port X/X/X
translation-profile incoming INBOUND_PSTN
Let me know if this helps.
John

Using answer-address in dial-peer when it has incoming called number

Hello,
We would like to use an inbound dial peer that will match by the Calling Number using answer-address.
In our current configuration we already have inbound dial peers with "incoming called number" for Fax2Mail services.
We want to use the calling number for matching to a different dial peer, without the "fax detect" service.
As we notice, as soon as he matching the incoming called number, even if have identical dial peer with the same incoming called number, he stop the matching processes and the gateway ignore the answer-address.
Is there any way to match the dial peer by Calling Number even if he have the incoming called number field?
Thanks

Hello,
in the Inbound Dial-peer matching process, the 'incoming called-number' has the highest priority over asnwer- address & destination pattern. So if you want to match a particular inbound dial-peer based on calling number, add only asnwer-address and don't configure incoming-called number on the same dial-peer.
FYI: Understanding the dial-peer matching process
http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/14074-in-dial-peer-match.html?referring_site=smartnavRD#topic3
//Suresh
Please rate all the useful posts.

Nokia 2700 - Incoming Call Number not displaying!!...

When an incoming call comes, the number does not get displayed..
Where is the setting change option for this??

check with your operator that caller id is turned on or update your sim card
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Caller ID for incoming calls NOT displaying name from contacts (only displays phone # on BB Z10)

on the Z10 Whenever I receive an incoming call, the caller ID only shows the phone #, even when I have that number matched to a contact in the phone, even the call log it show the number and not the name. How do I get the caller ID to recognize and display the appropriate contact name with the phone fro an incoming call? Any help would be greatly appreciated! Thanks, Akhanbilal

Thank you Arsen but, as with everyone else : (1) When you get an in-coming call, it has no call log on the phone app call log that allows you do a thing under the sun except to touch the number of the last call, and when you do, it CALLS THEM BACK. (2) On every other BlackBerry I have owned, about 10 to-date, I simply selected the last in-coming call and had a button at the bottom of the screen to allow me to ADD TO CONTACTS. (3) This does NOT exist on the Z10, and there certainly is no "Click on number, little slider pops on the right, select add to contact." Instead it dials them. Frustrating other uses have described Arsen. Further, while on the topic : (4) None of this has anything to do with 10-digit national dialing plan or anything else on swipe finger down from top in Phone App, Arsen. (5) When you swipe Phone App down, you see SETTINGS. Then, there are 13 items. I have looked at all 13 items and see nothing as you describe to select, nor any instructions on what to set the SMART DIALING to when there are 3 area codes local for my city and country code shows +1. Further, while on topic here : (6) Visual Voice Mail has been turned-on and whatever visual voice mail is, never supported on any previous BlackBerry including my 9780 before this, I have it with T-Mobile and have it turned on on the BlackBerry Z10 and it too does not work. On the positive side, I do have a work-around for BlackBerry Z10 to 2013 Toyota entune. (7) I first took a vm msg .wav file of just hello (blank will not send) and saved it on BlackBerry Z10. The Toyota entune is LOOKING for a music and will LOCK-UP if none are found. By giving it this, it worked on my 2013 Toyota entune for the 1st time ever. Yeah ! It is a little frustrating every few minutes listening to myself say HELLO. But, hey no one really notices it with all the other stuff going on NAVIGATION, radio, cell phone calls, and all the computerized alerts on 2013 Toyota even without entune. (8) What I did now was to go into Navigation and remove SYNC with MUSIC. I accomplished that after pairing to Z10 to 2013 Toyota, by CANCELLING ALL CONNECTIONS leaving only the pairing itself. Then, you must choose some connections in the pairing section of SET-UP within Navigation itself. If you cannot even get to that point, try depressing on the Navigation Screen, INTERNET at which point it will allow you access to SET-UP when you see the message NO ENTUNE APP FOUND ON YOUR BlackBerry Z10. Red-headed step-child is what we all are. Have to help each other. Arsen I appeciate you helping all of us. Seems the list is about 20 who have voiced it here in this one thread. We voice it for the 200 million BlackBerry users worldwide, all left out in the cold despite a pretty cool Z10 product. Far better than iPhone 5. I chose phone and internet. Internet comes back no BLACKBERRY Z10 TOYOTA ENTUNE APP. But, at least now I don't have to hear the music HELLO and do not also have the BlackBerry Z10 LOCKED-UP with pop up message you have to say OK to 10 million times to clear and never can actually do a thing on the BlackBerry Z10 as a result. Cannot add an in-coming call to Contacts Z10. Cannot see name and number calling me, just the bloody number, no clue who is calling ridiculous. Cannot do diddle-e-squat on BlackBerry Z10 on Toyota entune. No App. Horrendous. TAGS : Z10 no caller-id name, Z10 no app Toyota 2013 entune, Z10 add call to Contacts

IPhone 5 incoming calls go straight to voicemail in certain areas

I know that this issue has been reported by many users in this and other forums, but I thought I would share my story too.
I have a iphone 5 that is exhibiting the following issues:
- When I am downtown Boston and certain areas in MA, incoming calls go straight to voicemail. The phone does not ring and the only way to tell if people called me is if they leave a voicemail
- When I make calls, my phone numbers shows as blocked at the receiving end. So if people block anonymous calls then I won't be able to call them
I opened a ticket with VZW and this is what has been done so far to no avail:
- Got a replacement phone
- Changed the SIM card
- Verizon Re-provisionned the phone number
- Disabled LTE
- Reset Network Settings
- Power cycle the phone (many many times)
Verizon said my issue is due to network extenders in the area. Well, if this is true then thousands of VZW customers would have this issue as network extenders are all over the place in Boston. So far VZW does not have a solution to my problem.
My next step is to reactivate my old iPhone 4S to see if it is a iPhone5 issue or something else. will keep you posted.

If they say they did, ask them to re-provision the account. Sometimes errors occur and the account is not provisioned correctly, even though features are included in your plan according to the billing system.

Caller ID for incoming calls NOT displaying name from contacts (only displays phone #)

Whenever I receive an incoming call, the caller ID only shows the phone #, even when I have that number matched to a contact. Since I don't have many phone #'s memorized, I have no clue that it is someone I know. However, the contact name is displayed in my call log, just not on the initial incoming call display. How do I get the caller ID to recognize and display the appropriate contact name with the phone #? Any help would be greatly appreciated! (I have the 8520 blackberry)
Thanks, Lauren
Solved!
Go to Solution.

Thanks so much! The problem was the security settings. I switched the content protection for "contacts included" to "no" and now my contact info shows up on the incoming call display! Thanks again for your help!

Ios 5.1 worst iphone 4s incoming call no audio for caller for 3-5 sec

i bought iphone 4s (ios 5.01) jan 2011. for the date of purchase i had problems form the date of purchase. There was no service (network issue) and i thought it would be my new sim card. but i tried it on my wife's mobile it worked well(no issue). i gave to showroom and booked for a complaint and after 2 weeks they called me and said they have updated to ios 5.0.1 (9a405). i had no more issues with the network but i had issues in outgoing calls. Whenever i call someone they wont be able to hear me for first few seconds(2-4 secs) and i stared to talk after 3 secs regularly(since the customer care is worst here i dont want to give and wait for another 3 weeks where i wont get right solution too). Later i had a ios update (ios 5.1) meesage while my phone was connected to wifi. i thought it will solve the issue (after reading some reviews) and updated to ios 5.1 which is what i am using right now. But now i have more issues than before.
1. The screen goes blank(dark screen) when i try to call back (i.e after call busy) 2-3 times. then i have to press home button and once again i have to open call button(green layer which will be on top just like on call) and hang up and try once again.
2. Sometimes my network drop zero then start searching network display no service for few second and then the network once again appear while on call(no issue with network provider i checked with other phone which is working well)
3. Now when there is incoming call there will no audio for caller(not me) for 2-5 sec (i did a count..ha..ah) they wont be able hear.
i did try reset to factory setting, no other apps installed. did try everything and nothing helped..i am also lazy to write this but no way to find a solution..pls do help and sort the issues permanently..
iphone is costly only because its an apple product and for its ios which is faliure now. so i suggest them to reduce the price and shouldnt say they are the trend setter or innovative anymore..worst ios and i have read many reviews and i know there are people who dont want to waste time/lazy by writing the review..but they need soultion..i am ashamed of my iphone which i bought 45000 rs when compared to 15000rs samsung product with no issues like these..

i have 3 problems listed below while using iphone 4s with ios 5.1 version
1. The screen goes blank(dark screen) when i try to call back (i.e redialing 2-3 times). then i have to press home button and once again i have to press call button(sometimes green layer which will be on top of the screen) and press red button to close the call and try once again.
2. Sometimes my network drop zero then start searching network then display no service for few second and then the network once again appear (no issue with the network provider i checked with other phone which is working fine)
3. When there is incoming call the people on the other end of the call (caller and not me) cant hear for first 2-5 sec (i did a count..ha..ah) they wont be able hear.
Is it clear now buddy....

IPhone 5s incoming call rings on both headsets and speaker while headsets plugged in

Why my iphone 5s rings on both speaker and headsets in incoming call, while the headsets plugged in the phone?

Hi Lucasethio,
That is expected behavior on a non-muted iPhone. If you mute/silence the ringer with the side switch, you should still hear the ringer through any plugged in headsets as well. You may also find the following article helpful:
iOS: Understanding sounds, ringtones, and alerts
http://support.apple.com/kb/HT5800
Regards,
- Brenden

Iphone 5: Incoming Calls won't go through.

Hello everyone,
I purchased the Iphone 5 about 1-2 weeks ago and so far i love it. However as of recently i've been expeirencing a few issues where incoming calls won't go through.
I'll try my best to break it down:
Someone calls me.
Phone "rings" on their side.
My iPhone doesn't ring.
I get no notification of a missed call, and maybe a few minutes later i'll be alerted to a missed call or a voicemail.
I've tested various things that i assume would cause the issue, but so far none of them seem to be the case.
I even went to Verizon (a few minutes ago actually) and they did a soft-reset (pretty much what i did prior) and soon as i got home i called the phone and nothing went through. I waited about a minute, called again, and then i rang. However seconds later i tried calling again, and it didn't ring.
Also it happens are random times. First insident was a few nights ago around 10 PM. Then again a few days ago around 3 PM and finally this morning around 8-8:30 AM.
No my "Do not disturb" isn't on.
I have good (if not great) connection.
At home the phone is always on WiFi
Yes i've tried turning off LTE.
Yes i've done a network reset.
Yes, phone is up to date.
One question i have is could it be only having this issue at my house? I have no way of testing if it only happens at my home (cause no one really has that kind of time to waste with me lol) so i'm not sure.

I want to ensure those important calls get through Huxable! I understand why you are concerned!
My first recommendation would be to make sure you are power cycling the device(turning off and on) at least once a day. This allows the device to refresh with the network and update the tower information on 4G handsets.
Second, it will definitely be valuable to test the device in different locations to determine whether it is a location issue versus an equipment issue. If this happens in multiple locations for example, it is likely device related.
If you find the issues occur mainly inside your home, the network extender accessory is an excellent option to boost indoor signal strength.
http://bit.ly/AKkC
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport

Incoming calls deviant display

For business use much diversion of incoming calls.
Is there a way to tell when I'm receiving an incoming call divert?
Thanks
Andrew

Have a look at the link below for the more common reasons and cures for Caller ID issues.
/discussions/board/message?board.id=topfaq&thread.id=28

Iphone 5s incoming call number displays incorrectly.

Similar Messages

Maybe you are looking for